mbed official
mbed library sources
Dependents: Encrypted my_mbed lklk CyaSSL_DTLS_Cellular ... more
Superseded
This library was superseded by mbed-dev - https://os.mbed.com/users/mbed_official/code/mbed-dev/.
Development branch of the mbed library sources. This library is kept in synch with the latest changes from the mbed SDK and it is not guaranteed to work.
If you are looking for a stable and tested release, please import one of the official mbed library releases:
Import librarymbed
The official Mbed 2 C/C++ SDK provides the software platform and libraries to build your applications.
Last commit 20 Feb 2019 by 
mbed official
Diff: targets/cmsis/TARGET_STM/TARGET_STM32F0/stm32f0xx_hal_spi.h
- Revision:
- 441:d2c15dda23c1
- Parent:
- 392:2b59412bb664
- Child:
- 630:825f75ca301e
--- a/targets/cmsis/TARGET_STM/TARGET_STM32F0/stm32f0xx_hal_spi.h Tue Dec 16 08:15:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F0/stm32f0xx_hal_spi.h Tue Jan 06 16:15:36 2015 +0000
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f0xx_hal_spi.h
* @author MCD Application Team
- * @version V1.1.0
- * @date 03-Oct-2014
+ * @version V1.2.0
+ * @date 11-December-2014
* @brief Header file of SPI HAL module.
******************************************************************************
* @attention
@@ -106,6 +106,7 @@
This parameter must 0 or 1 or 2*/
uint32_t NSSPMode; /*!< Specifies whether the NSSP signal is enabled or not .
+ This parameter can be a value of @ref SPI_NSSP_Mode
This mode is activated by the NSSP bit in the SPIx_CR2 register and
it takes effect only if the SPI interface is configured as Motorola SPI
master (FRF=0) with capture on the first edge (SPIx_CR1 CPHA = 0,
@@ -117,68 +118,52 @@
*/
typedef enum
{
- HAL_SPI_STATE_RESET = 0x00, /*!< Peripheral not Initialized */
+ HAL_SPI_STATE_RESET = 0x00, /*!< Peripheral not Initialized */
HAL_SPI_STATE_READY = 0x01, /*!< Peripheral Initialized and ready for use */
HAL_SPI_STATE_BUSY = 0x02, /*!< an internal process is ongoing */
- HAL_SPI_STATE_BUSY_TX = 0x03, /*!< Data Transmission process is ongoing */
+ HAL_SPI_STATE_BUSY_TX = 0x03, /*!< Data Transmission process is ongoing */
HAL_SPI_STATE_BUSY_RX = 0x04, /*!< Data Reception process is ongoing */
- HAL_SPI_STATE_BUSY_TX_RX = 0x05, /*!< Data Transmission and Reception process is ongoing */
- HAL_SPI_STATE_TIMEOUT = 0x06, /*!< Timeout state */
- HAL_SPI_STATE_ERROR = 0x07 /*!< Data Transmission and Reception process is ongoing */
-
+ HAL_SPI_STATE_BUSY_TX_RX = 0x05, /*!< Data Transmission and Reception process is ongoing */
+ HAL_SPI_STATE_ERROR = 0x06 /*!< SPI error state */
}HAL_SPI_StateTypeDef;
/**
- * @brief HAL SPI Error Code structure definition
- */
-typedef enum
-{
- HAL_SPI_ERROR_NONE = 0x00, /*!< No error */
- HAL_SPI_ERROR_MODF = 0x01, /*!< MODF error */
- HAL_SPI_ERROR_CRC = 0x02, /*!< CRC error */
- HAL_SPI_ERROR_OVR = 0x04, /*!< OVR error */
- HAL_SPI_ERROR_FRE = 0x08, /*!< FRE error */
- HAL_SPI_ERROR_DMA = 0x10, /*!< DMA transfer error */
- HAL_SPI_ERROR_FLAG = 0x20, /*!< Error on BSY/TXE/FTLVL/FRLVL Flag */
- HAL_SPI_ERROR_UNKNOW = 0x40, /*!< Unknow Error error */
-}HAL_SPI_ErrorTypeDef;
-
-/**
* @brief SPI handle Structure definition
*/
typedef struct __SPI_HandleTypeDef
{
- SPI_TypeDef *Instance; /* SPI registers base address */
+ SPI_TypeDef *Instance; /*!< SPI registers base address */
- SPI_InitTypeDef Init; /* SPI communication parameters */
+ SPI_InitTypeDef Init; /*!< SPI communication parameters */
- uint8_t *pTxBuffPtr; /* Pointer to SPI Tx transfer Buffer */
+ uint8_t *pTxBuffPtr; /*!< Pointer to SPI Tx transfer Buffer */
- uint16_t TxXferSize; /* SPI Tx Transfer size */
+ uint16_t TxXferSize; /*!< SPI Tx Transfer size */
- uint16_t TxXferCount; /* SPI Tx Transfer Counter */
+ uint16_t TxXferCount; /*!< SPI Tx Transfer Counter */
- uint8_t *pRxBuffPtr; /* Pointer to SPI Rx transfer Buffer */
+ uint8_t *pRxBuffPtr; /*!< Pointer to SPI Rx transfer Buffer */
- uint16_t RxXferSize; /* SPI Rx Transfer size */
+ uint16_t RxXferSize; /*!< SPI Rx Transfer size */
- uint16_t RxXferCount; /* SPI Rx Transfer Counter */
+ uint16_t RxXferCount; /*!< SPI Rx Transfer Counter */
- uint32_t CRCSize; /* SPI CRC size used for the transfer */
+ uint32_t CRCSize; /*!< SPI CRC size used for the transfer */
- void (*RxISR)(struct __SPI_HandleTypeDef *hspi); /* function pointer on Rx IRQ handler */
+ void (*RxISR)(struct __SPI_HandleTypeDef *hspi); /*!< function pointer on Rx IRQ handler */
- void (*TxISR)(struct __SPI_HandleTypeDef *hspi); /* function pointer on Tx IRQ handler */
+ void (*TxISR)(struct __SPI_HandleTypeDef *hspi); /*!< function pointer on Tx IRQ handler */
- DMA_HandleTypeDef *hdmatx; /* SPI Tx DMA Handle parameters */
+ DMA_HandleTypeDef *hdmatx; /*!< SPI Tx DMA Handle parameters */
- DMA_HandleTypeDef *hdmarx; /* SPI Rx DMA Handle parameters */
+ DMA_HandleTypeDef *hdmarx; /*!< SPI Rx DMA Handle parameters */
- HAL_LockTypeDef Lock; /* Locking object */
+ HAL_LockTypeDef Lock; /*!< Locking object */
- HAL_SPI_StateTypeDef State; /* SPI communication state */
+ HAL_SPI_StateTypeDef State; /*!< SPI communication state */
- HAL_SPI_ErrorTypeDef ErrorCode; /* SPI Error code */
+ __IO uint32_t ErrorCode; /*!< SPI Error code
+ This parameter can be a value of @ref SPI_Error */
}SPI_HandleTypeDef;
@@ -192,10 +177,24 @@
* @{
*/
+/** @defgroup SPI_Error SPI Error
+ * @{
+ */
+ #define HAL_SPI_ERROR_NONE ((uint32_t)0x00000000) /*!< No error */
+ #define HAL_SPI_ERROR_MODF ((uint32_t)0x00000001) /*!< MODF error */
+ #define HAL_SPI_ERROR_CRC ((uint32_t)0x00000002) /*!< CRC error */
+ #define HAL_SPI_ERROR_OVR ((uint32_t)0x00000004) /*!< OVR error */
+ #define HAL_SPI_ERROR_FRE ((uint32_t)0x00000008) /*!< FRE error */
+ #define HAL_SPI_ERROR_DMA ((uint32_t)0x00000010) /*!< DMA transfer error */
+ #define HAL_SPI_ERROR_FLAG ((uint32_t)0x00000020) /*!< Error on BSY/TXE/FTLVL/FRLVL Flag */
+ #define HAL_SPI_ERROR_UNKNOW ((uint32_t)0x00000040) /*!< Unknow Error error */
+/**
+ * @}
+ */
+
/** @defgroup SPI_mode SPI mode
* @{
*/
-
#define SPI_MODE_SLAVE ((uint32_t)0x00000000)
#define SPI_MODE_MASTER (SPI_CR1_MSTR | SPI_CR1_SSI)
#define IS_SPI_MODE(MODE) (((MODE) == SPI_MODE_SLAVE) || \
@@ -223,23 +222,22 @@
* @}
*/
-/** @defgroup SPI_data_size SPI data size
+/** @defgroup SPI_data_size SPI Data size
* @{
*/
-
-#define SPI_DATASIZE_4BIT ((uint16_t)0x0300)
-#define SPI_DATASIZE_5BIT ((uint16_t)0x0400)
-#define SPI_DATASIZE_6BIT ((uint16_t)0x0500)
-#define SPI_DATASIZE_7BIT ((uint16_t)0x0600)
-#define SPI_DATASIZE_8BIT ((uint16_t)0x0700)
-#define SPI_DATASIZE_9BIT ((uint16_t)0x0800)
-#define SPI_DATASIZE_10BIT ((uint16_t)0x0900)
-#define SPI_DATASIZE_11BIT ((uint16_t)0x0A00)
-#define SPI_DATASIZE_12BIT ((uint16_t)0x0B00)
-#define SPI_DATASIZE_13BIT ((uint16_t)0x0C00)
-#define SPI_DATASIZE_14BIT ((uint16_t)0x0D00)
-#define SPI_DATASIZE_15BIT ((uint16_t)0x0E00)
-#define SPI_DATASIZE_16BIT ((uint16_t)0x0F00)
+#define SPI_DATASIZE_4BIT ((uint32_t)0x0300) /*!< SPI Datasize = 4bits */
+#define SPI_DATASIZE_5BIT ((uint32_t)0x0400) /*!< SPI Datasize = 5bits */
+#define SPI_DATASIZE_6BIT ((uint32_t)0x0500) /*!< SPI Datasize = 6bits */
+#define SPI_DATASIZE_7BIT ((uint32_t)0x0600) /*!< SPI Datasize = 7bits */
+#define SPI_DATASIZE_8BIT ((uint32_t)0x0700) /*!< SPI Datasize = 8bits */
+#define SPI_DATASIZE_9BIT ((uint32_t)0x0800) /*!< SPI Datasize = 9bits */
+#define SPI_DATASIZE_10BIT ((uint32_t)0x0900) /*!< SPI Datasize = 10bits */
+#define SPI_DATASIZE_11BIT ((uint32_t)0x0A00) /*!< SPI Datasize = 11bits */
+#define SPI_DATASIZE_12BIT ((uint32_t)0x0B00) /*!< SPI Datasize = 12bits */
+#define SPI_DATASIZE_13BIT ((uint32_t)0x0C00) /*!< SPI Datasize = 13bits */
+#define SPI_DATASIZE_14BIT ((uint32_t)0x0D00) /*!< SPI Datasize = 14bits */
+#define SPI_DATASIZE_15BIT ((uint32_t)0x0E00) /*!< SPI Datasize = 15bits */
+#define SPI_DATASIZE_16BIT ((uint32_t)0x0F00) /*!< SPI Datasize = 16bits */
#define IS_SPI_DATASIZE(DATASIZE) (((DATASIZE) == SPI_DATASIZE_16BIT) || \
((DATASIZE) == SPI_DATASIZE_15BIT) || \
((DATASIZE) == SPI_DATASIZE_14BIT) || \
@@ -261,9 +259,8 @@
/** @defgroup SPI_Clock_Polarity SPI Clock Polarity
* @{
*/
-
-#define SPI_POLARITY_LOW ((uint32_t)0x00000000)
-#define SPI_POLARITY_HIGH SPI_CR1_CPOL
+#define SPI_POLARITY_LOW ((uint32_t)0x00000000) /*!< SPI polarity Low */
+#define SPI_POLARITY_HIGH SPI_CR1_CPOL /*!< SPI polarity High */
#define IS_SPI_CPOL(CPOL) (((CPOL) == SPI_POLARITY_LOW) || \
((CPOL) == SPI_POLARITY_HIGH))
/**
@@ -273,9 +270,8 @@
/** @defgroup SPI_Clock_Phase SPI Clock Phase
* @{
*/
-
-#define SPI_PHASE_1EDGE ((uint32_t)0x00000000)
-#define SPI_PHASE_2EDGE SPI_CR1_CPHA
+#define SPI_PHASE_1EDGE ((uint32_t)0x00000000) /*!< SPI Phase 1EDGE */
+#define SPI_PHASE_2EDGE SPI_CR1_CPHA /*!< SPI Phase 2EDGE */
#define IS_SPI_CPHA(CPHA) (((CPHA) == SPI_PHASE_1EDGE) || \
((CPHA) == SPI_PHASE_2EDGE))
/**
@@ -285,19 +281,17 @@
/** @defgroup SPI_Slave_Select_management SPI Slave Select management
* @{
*/
-
#define SPI_NSS_SOFT SPI_CR1_SSM
#define SPI_NSS_HARD_INPUT ((uint32_t)0x00000000)
#define SPI_NSS_HARD_OUTPUT ((uint32_t)0x00040000)
#define IS_SPI_NSS(NSS) (((NSS) == SPI_NSS_SOFT) || \
((NSS) == SPI_NSS_HARD_INPUT) || \
((NSS) == SPI_NSS_HARD_OUTPUT))
-
/**
* @}
*/
-/** @defgroup SPI_NSS_pulse_management SPI NSS pulse management
+/** @defgroup SPI_NSSP_Mode SPI NSS pulse management
* @{
*/
#define SPI_NSS_PULSE_ENABLED SPI_CR2_NSSP
@@ -305,16 +299,13 @@
#define IS_SPI_NSSP(NSSP) (((NSSP) == SPI_NSS_PULSE_ENABLED) || \
((NSSP) == SPI_NSS_PULSE_DISABLED))
-
/**
* @}
*/
-
/** @defgroup SPI_BaudRate_Prescaler SPI BaudRate Prescaler
* @{
*/
-
#define SPI_BAUDRATEPRESCALER_2 ((uint32_t)0x00000000)
#define SPI_BAUDRATEPRESCALER_4 ((uint32_t)0x00000008)
#define SPI_BAUDRATEPRESCALER_8 ((uint32_t)0x00000010)
@@ -338,7 +329,6 @@
/** @defgroup SPI_MSB_LSB_transmission SPI MSB LSB transmission
* @{
*/
-
#define SPI_FIRSTBIT_MSB ((uint32_t)0x00000000)
#define SPI_FIRSTBIT_LSB SPI_CR1_LSBFIRST
#define IS_SPI_FIRST_BIT(BIT) (((BIT) == SPI_FIRSTBIT_MSB) || \
@@ -350,7 +340,6 @@
/** @defgroup SPI_TI_mode SPI TI mode
* @{
*/
-
#define SPI_TIMODE_DISABLED ((uint32_t)0x00000000)
#define SPI_TIMODE_ENABLED SPI_CR2_FRF
#define IS_SPI_TIMODE(MODE) (((MODE) == SPI_TIMODE_DISABLED) || \
@@ -362,7 +351,6 @@
/** @defgroup SPI_CRC_Calculation SPI CRC Calculation
* @{
*/
-
#define SPI_CRCCALCULATION_DISABLED ((uint32_t)0x00000000)
#define SPI_CRCCALCULATION_ENABLED SPI_CR1_CRCEN
#define IS_SPI_CRC_CALCULATION(CALCULATION) (((CALCULATION) == SPI_CRCCALCULATION_DISABLED) || \
@@ -391,11 +379,11 @@
/** @defgroup SPI_FIFO_reception_threshold SPI FIFO reception threshold
* @{
* This parameter can be one of the following values:
- * SPI_RxFIFOThreshold_HF: RXNE event is generated if the FIFO
+ * SPI_RXFIFO_THRESHOLD or SPI_RXFIFO_THRESHOLD_QF :
+ * RXNE event is generated if the FIFO
* level is greater or equal to 1/2(16-bits).
- * SPI_RxFIFOThreshold_QF: RXNE event is generated if the FIFO
- * level is greater or equal to 1/4(8 bits).
- */
+ * SPI_RXFIFO_THRESHOLD_HF: RXNE event is generated if the FIFO
+ * level is greater or equal to 1/4(8 bits). */
#define SPI_RXFIFO_THRESHOLD SPI_CR2_FRXTH
#define SPI_RXFIFO_THRESHOLD_QF SPI_CR2_FRXTH
#define SPI_RXFIFO_THRESHOLD_HF ((uint32_t)0x0)
@@ -408,8 +396,8 @@
* @brief SPI Interrupt definition
* Elements values convention: 0xXXXXXXXX
* - XXXXXXXX : Interrupt control mask
- * @{
- */
+ * @{
+ */
#define SPI_IT_TXE SPI_CR2_TXEIE
#define SPI_IT_RXNE SPI_CR2_RXNEIE
#define SPI_IT_ERR SPI_CR2_ERRIE
@@ -441,12 +429,11 @@
/** @defgroup SPI_transmission_fifo_status_level SPI transmission fifo status level
* @{
*/
+#define SPI_FTLVL_EMPTY ((uint32_t)0x0000)
+#define SPI_FTLVL_QUARTER_FULL ((uint32_t)0x0800)
+#define SPI_FTLVL_HALF_FULL ((uint32_t)0x1000)
+#define SPI_FTLVL_FULL ((uint32_t)0x1800)
-#define SPI_FTLVL_EMPTY ((uint16_t)0x0000)
-#define SPI_FTLVL_QUARTER_FULL ((uint16_t)0x0800)
-#define SPI_FTLVL_HALF_FULL ((uint16_t)0x1000)
-#define SPI_FTLVL_FULL ((uint16_t)0x1800)
-
/**
* @}
*/
@@ -454,11 +441,10 @@
/** @defgroup SPI_reception_fifo_status_level SPI reception fifo status level
* @{
*/
-#define SPI_FRLVL_EMPTY ((uint16_t)0x0000)
-#define SPI_FRLVL_QUARTER_FULL ((uint16_t)0x0200)
-#define SPI_FRLVL_HALF_FULL ((uint16_t)0x0400)
-#define SPI_FRLVL_FULL ((uint16_t)0x0600)
-
+#define SPI_FRLVL_EMPTY ((uint32_t)0x0000)
+#define SPI_FRLVL_QUARTER_FULL ((uint32_t)0x0200)
+#define SPI_FRLVL_HALF_FULL ((uint32_t)0x0400)
+#define SPI_FRLVL_FULL ((uint32_t)0x0600)
/**
* @}
*/
@@ -480,23 +466,22 @@
#define __HAL_SPI_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_SPI_STATE_RESET)
/** @brief Enables or disables the specified SPI interrupts.
- * @param __HANDLE__: specifies the SPI Handle.
+ * @param __HANDLE__ : specifies the SPI Handle.
* This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
- * @param __INTERRUPT__: specifies the interrupt source to enable or disable.
+ * @param __INTERRUPT__ : specifies the interrupt source to enable or disable.
* This parameter can be one of the following values:
* @arg SPI_IT_TXE: Tx buffer empty interrupt enable
* @arg SPI_IT_RXNE: RX buffer not empty interrupt enable
* @arg SPI_IT_ERR: Error interrupt enable
* @retval None
*/
-
#define __HAL_SPI_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR2 |= (__INTERRUPT__))
-#define __HAL_SPI_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR2 &= (uint16_t)(~(__INTERRUPT__)))
+#define __HAL_SPI_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR2 &= (~(__INTERRUPT__)))
/** @brief Checks if the specified SPI interrupt source is enabled or disabled.
- * @param __HANDLE__: specifies the SPI Handle.
+ * @param __HANDLE__ : specifies the SPI Handle.
* This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
- * @param __INTERRUPT__: specifies the SPI interrupt source to check.
+ * @param __INTERRUPT__ : specifies the SPI interrupt source to check.
* This parameter can be one of the following values:
* @arg SPI_IT_TXE: Tx buffer empty interrupt enable
* @arg SPI_IT_RXNE: RX buffer not empty interrupt enable
@@ -506,9 +491,9 @@
#define __HAL_SPI_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR2 & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
/** @brief Checks whether the specified SPI flag is set or not.
- * @param __HANDLE__: specifies the SPI Handle.
+ * @param __HANDLE__ : specifies the SPI Handle.
* This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
- * @param __FLAG__: specifies the flag to check.
+ * @param __FLAG__ : specifies the flag to check.
* This parameter can be one of the following values:
* @arg SPI_FLAG_RXNE: Receive buffer not empty flag
* @arg SPI_FLAG_TXE: Transmit buffer empty flag
@@ -517,73 +502,86 @@
* @arg SPI_FLAG_OVR: Overrun flag
* @arg SPI_FLAG_BSY: Busy flag
* @arg SPI_FLAG_FRE: Frame format error flag
+ * @arg SPI_FLAG_FTLVL: SPI fifo transmission level
+ * @arg SPI_FLAG_FRLVL: SPI fifo reception level
* @retval The new state of __FLAG__ (TRUE or FALSE).
*/
#define __HAL_SPI_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->SR) & (__FLAG__)) == (__FLAG__))
/** @brief Clears the SPI CRCERR pending flag.
- * @param __HANDLE__: specifies the SPI Handle.
+ * @param __HANDLE__ : specifies the SPI Handle.
* This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
* @retval None
*/
#define __HAL_SPI_CLEAR_CRCERRFLAG(__HANDLE__) ((__HANDLE__)->Instance->SR = (uint16_t)(~SPI_FLAG_CRCERR))
/** @brief Clears the SPI MODF pending flag.
- * @param __HANDLE__: specifies the SPI Handle.
+ * @param __HANDLE__ : specifies the SPI Handle.
* This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
*
* @retval None
*/
-#define __HAL_SPI_CLEAR_MODFFLAG(__HANDLE__) do{(__HANDLE__)->Instance->SR;\
- (__HANDLE__)->Instance->CR1 &= (uint16_t)(~SPI_CR1_SPE);}while(0)
+#define __HAL_SPI_CLEAR_MODFFLAG(__HANDLE__) do{\
+ __IO uint32_t tmpreg;\
+ tmpreg = (__HANDLE__)->Instance->SR;\
+ UNUSED(tmpreg); \
+ (__HANDLE__)->Instance->CR1 &= (~SPI_CR1_SPE);\
+ }while(0)
/** @brief Clears the SPI OVR pending flag.
- * @param __HANDLE__: specifies the SPI Handle.
+ * @param __HANDLE__ : specifies the SPI Handle.
* This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
*
* @retval None
*/
-#define __HAL_SPI_CLEAR_OVRFLAG(__HANDLE__) do{(__HANDLE__)->Instance->DR;\
- (__HANDLE__)->Instance->SR;}while(0)
-
+#define __HAL_SPI_CLEAR_OVRFLAG(__HANDLE__) do{ \
+ __IO uint32_t tmpreg; \
+ tmpreg = (__HANDLE__)->Instance->DR; \
+ tmpreg = (__HANDLE__)->Instance->SR; \
+ UNUSED(tmpreg); \
+ } while(0)
+
/** @brief Clears the SPI FRE pending flag.
- * @param __HANDLE__: specifies the SPI Handle.
+ * @param __HANDLE__ : specifies the SPI Handle.
* This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
*
* @retval None
*/
-#define __HAL_SPI_CLEAR_FREFLAG(__HANDLE__) ((__HANDLE__)->Instance->SR)
-
+#define __HAL_SPI_CLEAR_FREFLAG(__HANDLE__) do{\
+ __IO uint32_t tmpreg;\
+ tmpreg = ((__HANDLE__)->Instance->SR);\
+ UNUSED(tmpreg); \
+ }while(0)
/** @brief Enables the SPI.
- * @param __HANDLE__: specifies the SPI Handle.
+ * @param __HANDLE__ : specifies the SPI Handle.
* This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
* @retval None
*/
#define __HAL_SPI_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= SPI_CR1_SPE)
/** @brief Disables the SPI.
- * @param __HANDLE__: specifies the SPI Handle.
+ * @param __HANDLE__ : specifies the SPI Handle.
* This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
* @retval None
*/
-#define __HAL_SPI_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= (uint16_t)(~SPI_CR1_SPE))
+#define __HAL_SPI_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= (~SPI_CR1_SPE))
/** @brief Sets the SPI transmit-only mode.
- * @param __HANDLE__: specifies the SPI Handle.
+ * @param __HANDLE__ : specifies the SPI Handle.
* This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
* @retval None
*/
#define __HAL_SPI_1LINE_TX(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= SPI_CR1_BIDIOE)
/** @brief Sets the SPI receive-only mode.
- * @param __HANDLE__: specifies the SPI Handle.
+ * @param __HANDLE__ : specifies the SPI Handle.
* This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
* @retval None
*/
-#define __HAL_SPI_1LINE_RX(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= (uint16_t)(~SPI_CR1_BIDIOE))
+#define __HAL_SPI_1LINE_RX(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= (~SPI_CR1_BIDIOE))
/** @brief Resets the CRC calculation of the SPI.
- * @param __HANDLE__: specifies the SPI Handle.
+ * @param __HANDLE__ : specifies the SPI Handle.
* This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
* @retval None
*/
@@ -629,10 +627,18 @@
HAL_StatusTypeDef HAL_SPI_Transmit_DMA(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size);
HAL_StatusTypeDef HAL_SPI_Receive_DMA(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size);
HAL_StatusTypeDef HAL_SPI_TransmitReceive_DMA(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size);
+HAL_StatusTypeDef HAL_SPI_DMAPause(SPI_HandleTypeDef *hspi);
+HAL_StatusTypeDef HAL_SPI_DMAResume(SPI_HandleTypeDef *hspi);
+HAL_StatusTypeDef HAL_SPI_DMAStop(SPI_HandleTypeDef *hspi);
+HAL_StatusTypeDef HAL_SPI_FlushRxFifo(SPI_HandleTypeDef *hspi);
+
void HAL_SPI_IRQHandler(SPI_HandleTypeDef *hspi);
void HAL_SPI_TxCpltCallback(SPI_HandleTypeDef *hspi);
void HAL_SPI_RxCpltCallback(SPI_HandleTypeDef *hspi);
void HAL_SPI_TxRxCpltCallback(SPI_HandleTypeDef *hspi);
+void HAL_SPI_TxHalfCpltCallback(SPI_HandleTypeDef *hspi);
+void HAL_SPI_RxHalfCpltCallback(SPI_HandleTypeDef *hspi);
+void HAL_SPI_TxRxHalfCpltCallback(SPI_HandleTypeDef *hspi);
void HAL_SPI_ErrorCallback(SPI_HandleTypeDef *hspi);
/**
* @}
@@ -644,6 +650,7 @@
/* Peripheral State and Error functions ***************************************/
HAL_SPI_StateTypeDef HAL_SPI_GetState(SPI_HandleTypeDef *hspi);
+uint32_t HAL_SPI_GetError(SPI_HandleTypeDef *hspi);
/**
* @}
*/
