mbed library sources
Dependents: Encrypted my_mbed lklk CyaSSL_DTLS_Cellular ... more
Superseded
This library was superseded by mbed-dev - https://os.mbed.com/users/mbed_official/code/mbed-dev/.
Development branch of the mbed library sources. This library is kept in synch with the latest changes from the mbed SDK and it is not guaranteed to work.
If you are looking for a stable and tested release, please import one of the official mbed library releases:
Import librarymbed
The official Mbed 2 C/C++ SDK provides the software platform and libraries to build your applications.
Diff: targets/cmsis/TARGET_STM/TARGET_STM32F0/stm32f0xx_hal_gpio.h
- Revision:
- 630:825f75ca301e
- Parent:
- 441:d2c15dda23c1
--- a/targets/cmsis/TARGET_STM/TARGET_STM32F0/stm32f0xx_hal_gpio.h Mon Sep 28 10:30:09 2015 +0100 +++ b/targets/cmsis/TARGET_STM/TARGET_STM32F0/stm32f0xx_hal_gpio.h Mon Sep 28 10:45:10 2015 +0100 @@ -2,13 +2,13 @@ ****************************************************************************** * @file stm32f0xx_hal_gpio.h * @author MCD Application Team - * @version V1.2.0 - * @date 11-December-2014 + * @version V1.3.0 + * @date 26-June-2015 * @brief Header file of GPIO HAL module. ****************************************************************************** * @attention * - * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2> + * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2> * * Redistribution and use in source and binary forms, with or without modification, * are permitted provided that the following conditions are met: @@ -93,19 +93,9 @@ */ /* Exported constants --------------------------------------------------------*/ - /** @defgroup GPIO_Exported_Constants GPIO Exported Constants * @{ */ - -/** @defgroup GPIO_pin_actions GPIO pin actions - * @{ - */ -#define IS_GPIO_PIN_ACTION(ACTION) (((ACTION) == GPIO_PIN_RESET) || ((ACTION) == GPIO_PIN_SET)) -/** - * @} - */ - /** @defgroup GPIO_pins GPIO pins * @{ */ @@ -128,8 +118,6 @@ #define GPIO_PIN_All ((uint16_t)0xFFFF) /* All pins selected */ #define GPIO_PIN_MASK ((uint32_t)0x0000FFFF) /* PIN mask for assert test */ - -#define IS_GPIO_PIN(PIN) (((PIN) & GPIO_PIN_MASK) != (uint32_t)0x00) /** * @} */ @@ -149,30 +137,13 @@ #define GPIO_MODE_OUTPUT_OD ((uint32_t)0x00000011) /*!< Output Open Drain Mode */ #define GPIO_MODE_AF_PP ((uint32_t)0x00000002) /*!< Alternate Function Push Pull Mode */ #define GPIO_MODE_AF_OD ((uint32_t)0x00000012) /*!< Alternate Function Open Drain Mode */ - -#define GPIO_MODE_ANALOG ((uint32_t)0x00000003) /*!< Analog Mode */ - +#define GPIO_MODE_ANALOG ((uint32_t)0x00000003) /*!< Analog Mode */ #define GPIO_MODE_IT_RISING ((uint32_t)0x10110000) /*!< External Interrupt Mode with Rising edge trigger detection */ #define GPIO_MODE_IT_FALLING ((uint32_t)0x10210000) /*!< External Interrupt Mode with Falling edge trigger detection */ #define GPIO_MODE_IT_RISING_FALLING ((uint32_t)0x10310000) /*!< External Interrupt Mode with Rising/Falling edge trigger detection */ - #define GPIO_MODE_EVT_RISING ((uint32_t)0x10120000) /*!< External Event Mode with Rising edge trigger detection */ #define GPIO_MODE_EVT_FALLING ((uint32_t)0x10220000) /*!< External Event Mode with Falling edge trigger detection */ #define GPIO_MODE_EVT_RISING_FALLING ((uint32_t)0x10320000) /*!< External Event Mode with Rising/Falling edge trigger detection */ - -#define IS_GPIO_MODE(MODE) (((MODE) == GPIO_MODE_INPUT) ||\ - ((MODE) == GPIO_MODE_OUTPUT_PP) ||\ - ((MODE) == GPIO_MODE_OUTPUT_OD) ||\ - ((MODE) == GPIO_MODE_AF_PP) ||\ - ((MODE) == GPIO_MODE_AF_OD) ||\ - ((MODE) == GPIO_MODE_IT_RISING) ||\ - ((MODE) == GPIO_MODE_IT_FALLING) ||\ - ((MODE) == GPIO_MODE_IT_RISING_FALLING) ||\ - ((MODE) == GPIO_MODE_EVT_RISING) ||\ - ((MODE) == GPIO_MODE_EVT_FALLING) ||\ - ((MODE) == GPIO_MODE_EVT_RISING_FALLING) ||\ - ((MODE) == GPIO_MODE_ANALOG)) - /** * @} */ @@ -185,8 +156,6 @@ #define GPIO_SPEED_MEDIUM ((uint32_t)0x00000001) /*!< Medium speed */ #define GPIO_SPEED_HIGH ((uint32_t)0x00000003) /*!< High speed */ -#define IS_GPIO_SPEED(SPEED) (((SPEED) == GPIO_SPEED_LOW) || ((SPEED) == GPIO_SPEED_MEDIUM) || \ - ((SPEED) == GPIO_SPEED_HIGH)) /** * @} */ @@ -198,9 +167,6 @@ #define GPIO_NOPULL ((uint32_t)0x00000000) /*!< No Pull-up or Pull-down activation */ #define GPIO_PULLUP ((uint32_t)0x00000001) /*!< Pull-up activation */ #define GPIO_PULLDOWN ((uint32_t)0x00000002) /*!< Pull-down activation */ - -#define IS_GPIO_PULL(PULL) (((PULL) == GPIO_NOPULL) || ((PULL) == GPIO_PULLUP) || \ - ((PULL) == GPIO_PULLDOWN)) /** * @} */ @@ -210,13 +176,12 @@ */ /* Exported macro ------------------------------------------------------------*/ - /** @defgroup GPIO_Exported_Macros GPIO Exported Macros * @{ */ /** - * @brief Checks whether the specified EXTI line flag is set or not. + * @brief Check whether the specified EXTI line flag is set or not. * @param __EXTI_LINE__: specifies the EXTI line flag to check. * This parameter can be GPIO_PIN_x where x can be(0..15) * @retval The new state of __EXTI_LINE__ (SET or RESET). @@ -224,7 +189,7 @@ #define __HAL_GPIO_EXTI_GET_FLAG(__EXTI_LINE__) (EXTI->PR & (__EXTI_LINE__)) /** - * @brief Clears the EXTI's line pending flags. + * @brief Clear the EXTI's line pending flags. * @param __EXTI_LINE__: specifies the EXTI lines flags to clear. * This parameter can be any combination of GPIO_PIN_x where x can be (0..15) * @retval None @@ -232,7 +197,7 @@ #define __HAL_GPIO_EXTI_CLEAR_FLAG(__EXTI_LINE__) (EXTI->PR = (__EXTI_LINE__)) /** - * @brief Checks whether the specified EXTI line is asserted or not. + * @brief Check whether the specified EXTI line is asserted or not. * @param __EXTI_LINE__: specifies the EXTI line to check. * This parameter can be GPIO_PIN_x where x can be(0..15) * @retval The new state of __EXTI_LINE__ (SET or RESET). @@ -240,7 +205,7 @@ #define __HAL_GPIO_EXTI_GET_IT(__EXTI_LINE__) (EXTI->PR & (__EXTI_LINE__)) /** - * @brief Clears the EXTI's line pending bits. + * @brief Clear the EXTI's line pending bits. * @param __EXTI_LINE__: specifies the EXTI lines to clear. * This parameter can be any combination of GPIO_PIN_x where x can be (0..15) * @retval None @@ -248,7 +213,7 @@ #define __HAL_GPIO_EXTI_CLEAR_IT(__EXTI_LINE__) (EXTI->PR = (__EXTI_LINE__)) /** - * @brief Generates a Software interrupt on selected EXTI line. + * @brief Generate a Software interrupt on selected EXTI line. * @param __EXTI_LINE__: specifies the EXTI line to check. * This parameter can be GPIO_PIN_x where x can be(0..15) * @retval None @@ -259,7 +224,39 @@ * @} */ -/* Include GPIO HAL Extension module */ +/* Private macros ------------------------------------------------------------*/ +/** @addtogroup GPIO_Private_Macros GPIO Private Macros + * @{ + */ +#define IS_GPIO_PIN_ACTION(ACTION) (((ACTION) == GPIO_PIN_RESET) || ((ACTION) == GPIO_PIN_SET)) + +#define IS_GPIO_PIN(__PIN__) (((__PIN__) & GPIO_PIN_MASK) != (uint32_t)0x00) + +#define IS_GPIO_MODE(__MODE__) (((__MODE__) == GPIO_MODE_INPUT) ||\ + ((__MODE__) == GPIO_MODE_OUTPUT_PP) ||\ + ((__MODE__) == GPIO_MODE_OUTPUT_OD) ||\ + ((__MODE__) == GPIO_MODE_AF_PP) ||\ + ((__MODE__) == GPIO_MODE_AF_OD) ||\ + ((__MODE__) == GPIO_MODE_IT_RISING) ||\ + ((__MODE__) == GPIO_MODE_IT_FALLING) ||\ + ((__MODE__) == GPIO_MODE_IT_RISING_FALLING) ||\ + ((__MODE__) == GPIO_MODE_EVT_RISING) ||\ + ((__MODE__) == GPIO_MODE_EVT_FALLING) ||\ + ((__MODE__) == GPIO_MODE_EVT_RISING_FALLING) ||\ + ((__MODE__) == GPIO_MODE_ANALOG)) + +#define IS_GPIO_SPEED(__SPEED__) (((__SPEED__) == GPIO_SPEED_LOW) ||\ + ((__SPEED__) == GPIO_SPEED_MEDIUM) ||\ + ((__SPEED__) == GPIO_SPEED_HIGH)) + +#define IS_GPIO_PULL(__PULL__) (((__PULL__) == GPIO_NOPULL) ||\ + ((__PULL__) == GPIO_PULLUP) || \ + ((__PULL__) == GPIO_PULLDOWN)) +/** + * @} + */ + +/* Include GPIO HAL Extended module */ #include "stm32f0xx_hal_gpio_ex.h" /* Exported functions --------------------------------------------------------*/ @@ -315,4 +312,3 @@ #endif /* __STM32F0xx_HAL_GPIO_H */ /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ -