Diff: targets/cmsis/TARGET_STM/TARGET_STM32L0/stm32l0xx_hal_pwr.h

Revision:

489:119543c9f674

Parent:

382:ee426a420dbb

--- a/targets/cmsis/TARGET_STM/TARGET_STM32L0/stm32l0xx_hal_pwr.h	Thu Mar 05 13:15:07 2015 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32L0/stm32l0xx_hal_pwr.h	Thu Mar 12 14:30:49 2015 +0000
@@ -2,13 +2,13 @@
   ******************************************************************************
   * @file    stm32l0xx_hal_pwr.h
   * @author  MCD Application Team
-  * @version V1.1.0
-  * @date    18-June-2014
+  * @version V1.2.0
+  * @date    06-February-2015
   * @brief   Header file of PWR HAL module.
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
   *
   * Redistribution and use in source and binary forms, with or without modification,
   * are permitted provided that the following conditions are met:
@@ -50,11 +50,14 @@
   * @{
   */
 
-/** @addtogroup PWR
+/** @defgroup PWR
   * @{
   */
 
-/* Exported types ------------------------------------------------------------*/
+/** @defgroup PWR_Exported_Types PWR Exported Types
+  * @{
+  */ 
+
 /**
   * @brief  PWR PVD configuration structure definition
   */
@@ -63,100 +66,106 @@
   uint32_t PVDLevel;   /*!< PVDLevel: Specifies the PVD detection level.
                             This parameter can be a value of @ref PWR_PVD_detection_level */
 
-  uint32_t Mode;      /*!< Mode: Specifies the operating mode for the selected pins.
-                           This parameter can be a value of @ref PWR_PVD_Mode */
+  uint32_t Mode;       /*!< Mode: Specifies the operating mode for the selected pins.
+                            This parameter can be a value of @ref PWR_PVD_Mode */
 }PWR_PVDTypeDef;
 
-/* Exported constants --------------------------------------------------------*/
-
-/** @defgroup PWR_Exported_Constants
-  * @{
+/**
+  * @}
   */
 
-/** @defgroup PWR_WakeUp_Pins
+/** @defgroup PWR_Private_Defines PWR Private Defines
   * @{
-  */
+  */ 
 
-#define PWR_WAKEUP_PIN1                 PWR_CSR_EWUP1
-#define PWR_WAKEUP_PIN2                 PWR_CSR_EWUP2
-#define IS_PWR_WAKEUP_PIN(PIN) (((PIN) == PWR_WAKEUP_PIN1) || \
-                                ((PIN) == PWR_WAKEUP_PIN2))
+#define PWR_EXTI_LINE_PVD      EXTI_FTSR_TR16  /*!< External interrupt line 16 Connected to the PVD EXTI Line */
+
 /**
   * @}
   */
 
-/** @defgroup PWR_PVD_detection_level
+/** @defgroup PWR_Exported_Constants PWR Exported Constants
+  * @{
+  */
+
+/** @defgroup PWR_register_alias_address PWR Register alias address
   * @{
   */
-#define PWR_PVDLEVEL_0                  PWR_CR_PLS_LEV0
-#define PWR_PVDLEVEL_1                  PWR_CR_PLS_LEV1
-#define PWR_PVDLEVEL_2                  PWR_CR_PLS_LEV2
-#define PWR_PVDLEVEL_3                  PWR_CR_PLS_LEV3
-#define PWR_PVDLEVEL_4                  PWR_CR_PLS_LEV4
-#define PWR_PVDLEVEL_5                  PWR_CR_PLS_LEV5
-#define PWR_PVDLEVEL_6                  PWR_CR_PLS_LEV6
-#define PWR_PVDLEVEL_7                  PWR_CR_PLS_LEV7  /* External input analog voltage 
-                                                            (Compare internally to VREFINT) */
-#define IS_PWR_PVD_LEVEL(LEVEL) (((LEVEL) == PWR_PVDLEVEL_0) || ((LEVEL) == PWR_PVDLEVEL_1)|| \
-                                 ((LEVEL) == PWR_PVDLEVEL_2) || ((LEVEL) == PWR_PVDLEVEL_3)|| \
-                                 ((LEVEL) == PWR_PVDLEVEL_4) || ((LEVEL) == PWR_PVDLEVEL_5)|| \
-                                 ((LEVEL) == PWR_PVDLEVEL_6) || ((LEVEL) == PWR_PVDLEVEL_7))
+#define PWR_WAKEUP_PIN1                PWR_CSR_EWUP1
+#define PWR_WAKEUP_PIN2                PWR_CSR_EWUP2
+#if defined (STM32L071xx) || defined (STM32L072xx) || defined (STM32L073xx) || defined (STM32L081xx) || defined (STM32L082xx) || defined (STM32L083xx)
+#define PWR_WAKEUP_PIN3                PWR_CSR_EWUP3
+#endif
+/**
+  * @}
+  */
+
+/** @defgroup PWR_PVD_detection_level PVD detection level
+  * @{
+  */
+#define PWR_PVDLEVEL_0                 PWR_CR_PLS_LEV0
+#define PWR_PVDLEVEL_1                 PWR_CR_PLS_LEV1
+#define PWR_PVDLEVEL_2                 PWR_CR_PLS_LEV2
+#define PWR_PVDLEVEL_3                 PWR_CR_PLS_LEV3
+#define PWR_PVDLEVEL_4                 PWR_CR_PLS_LEV4
+#define PWR_PVDLEVEL_5                 PWR_CR_PLS_LEV5
+#define PWR_PVDLEVEL_6                 PWR_CR_PLS_LEV6
+#define PWR_PVDLEVEL_7                 PWR_CR_PLS_LEV7  /* External input analog voltage 
+                                                           (Compare internally to VREFINT) */
 /**
   * @}
   */
 
-/** @defgroup PWR_PVD_Mode
+/** @defgroup PWR_PVD_Mode PWR PVD Mode
   * @{
   */
-#define  PWR_MODE_EVT                  ((uint32_t)0x00000000)   /*!< No Interrupt */
-#define  PWR_MODE_IT_RISING            ((uint32_t)0x00000001)   /*!< External Interrupt Mode with Rising edge trigger detection */
-#define  PWR_MODE_IT_FALLING           ((uint32_t)0x00000002)   /*!< External Interrupt Mode with Falling edge trigger detection */
-#define  PWR_MODE_IT_RISING_FALLING    ((uint32_t)0x00000003)   /*!< External Interrupt Mode with Rising/Falling edge trigger detection */
-#define IS_PWR_PVD_MODE(MODE) (((MODE) == PWR_MODE_EVT) || ((MODE) == PWR_MODE_IT_RISING)|| \
-                               ((MODE) == PWR_MODE_IT_FALLING) || ((MODE) == PWR_MODE_IT_RISING_FALLING))
+#define PWR_PVD_MODE_NORMAL                 ((uint32_t)0x00000000)   /*!< basic mode is used */
+#define PWR_PVD_MODE_IT_RISING              ((uint32_t)0x00010001)   /*!< External Interrupt Mode with Rising edge trigger detection */
+#define PWR_PVD_MODE_IT_FALLING             ((uint32_t)0x00010002)   /*!< External Interrupt Mode with Falling edge trigger detection */
+#define PWR_PVD_MODE_IT_RISING_FALLING      ((uint32_t)0x00010003)   /*!< External Interrupt Mode with Rising/Falling edge trigger detection */
+#define PWR_PVD_MODE_EVENT_RISING           ((uint32_t)0x00020001)   /*!< Event Mode with Rising edge trigger detection */
+#define PWR_PVD_MODE_EVENT_FALLING          ((uint32_t)0x00020002)   /*!< Event Mode with Falling edge trigger detection */
+#define PWR_PVD_MODE_EVENT_RISING_FALLING   ((uint32_t)0x00020003)   /*!< Event Mode with Rising/Falling edge trigger detection */
+
 /**
   * @}
   */
 
-/** @defgroup PWR_Regulator_state_in_SLEEP_STOP_mode
+/** @defgroup PWR_Regulator_state_in_SLEEP_STOP_mode PWR Regulator state in SLEEP/STOP mode
   * @{
   */
-#define PWR_MAINREGULATOR_ON                        ((uint32_t)0x00000000)
-#define PWR_LOWPOWERREGULATOR_ON                    PWR_CR_LPSDSR
+#define PWR_MAINREGULATOR_ON           ((uint32_t)0x00000000)
+#define PWR_LOWPOWERREGULATOR_ON       PWR_CR_LPSDSR
 
-#define IS_PWR_REGULATOR(REGULATOR) (((REGULATOR) == PWR_MAINREGULATOR_ON) || \
-                                     ((REGULATOR) == PWR_LOWPOWERREGULATOR_ON))
 /**
   * @}
   */
 
-/** @defgroup PWR_SLEEP_mode_entry
+/** @defgroup PWR_SLEEP_mode_entry PWR SLEEP mode entry
   * @{
   */
-#define PWR_SLEEPENTRY_WFI              ((uint8_t)0x01)
-#define PWR_SLEEPENTRY_WFE              ((uint8_t)0x02)
-#define IS_PWR_SLEEP_ENTRY(ENTRY) (((ENTRY) == PWR_SLEEPENTRY_WFI) || ((ENTRY) == PWR_SLEEPENTRY_WFE))
+#define PWR_SLEEPENTRY_WFI             ((uint8_t)0x01)
+#define PWR_SLEEPENTRY_WFE             ((uint8_t)0x02)
 /**
   * @}
   */
 
-/** @defgroup PWR_STOP_mode_entry
+/** @defgroup PWR_STOP_mode_entry PWR STOP mode entry
   * @{
   */
-#define PWR_STOPENTRY_WFI               ((uint8_t)0x01)
-#define PWR_STOPENTRY_WFE               ((uint8_t)0x02)
-#define IS_PWR_STOP_ENTRY(ENTRY) (((ENTRY) == PWR_STOPENTRY_WFI) || ((ENTRY) == PWR_STOPENTRY_WFE) )
+#define PWR_STOPENTRY_WFI              ((uint8_t)0x01)
+#define PWR_STOPENTRY_WFE              ((uint8_t)0x02)
 /**
   * @}
   */
 
-/** @defgroup PWR_Regulator_Voltage_Scale
+/** @defgroup PWR_Regulator_Voltage_Scale PWR Regulator Voltage Scale
   * @{
   */
 
-#define PWR_REGULATOR_VOLTAGE_SCALE1       PWR_CR_VOS_0
-#define PWR_REGULATOR_VOLTAGE_SCALE2       PWR_CR_VOS_1
-#define PWR_REGULATOR_VOLTAGE_SCALE3       PWR_CR_VOS
+#define PWR_REGULATOR_VOLTAGE_SCALE1   PWR_CR_VOS_0
+#define PWR_REGULATOR_VOLTAGE_SCALE2   PWR_CR_VOS_1
+#define PWR_REGULATOR_VOLTAGE_SCALE3   PWR_CR_VOS
 
 #define IS_PWR_VOLTAGE_SCALING_RANGE(RANGE) (((RANGE) == PWR_REGULATOR_VOLTAGE_SCALE1) || \
                                              ((RANGE) == PWR_REGULATOR_VOLTAGE_SCALE2) || \
@@ -165,16 +174,19 @@
   * @}
   */
 
-/** @defgroup PWR_Flag
+/** @defgroup PWR_Flag PWR Flag
   * @{
   */
-#define PWR_FLAG_WU                     PWR_CSR_WUF
-#define PWR_FLAG_SB                     PWR_CSR_SBF
-#define PWR_FLAG_PVDO                   PWR_CSR_PVDO
-#define PWR_FLAG_VREFINTRDY             PWR_CSR_VREFINTRDYF
-#define PWR_FLAG_VOS                    PWR_CSR_VOSF
-#define PWR_FLAG_REGLP                  PWR_CSR_REGLPF
+#define PWR_FLAG_WU                    PWR_CSR_WUF
+#define PWR_FLAG_SB                    PWR_CSR_SBF
+#define PWR_FLAG_PVDO                  PWR_CSR_PVDO
+#define PWR_FLAG_VREFINTRDY            PWR_CSR_VREFINTRDYF
+#define PWR_FLAG_VOS                   PWR_CSR_VOSF
+#define PWR_FLAG_REGLP                 PWR_CSR_REGLPF
 
+#define IS_PWR_GET_FLAG(FLAG) (((FLAG) == PWR_FLAG_WU) || ((FLAG) == PWR_FLAG_SB) || \
+                               ((FLAG) == PWR_FLAG_PVDO) || ((FLAG) == PWR_FLAG_VREFINTRDY) || \
+                               ((FLAG) == PWR_FLAG_VOS) || ((FLAG) == PWR_FLAG_REGLP))
 /**
   * @}
   */
@@ -183,11 +195,9 @@
   * @}
   */
 
-/* Exported macro ------------------------------------------------------------*/
-/** @defgroup PWR_Exported_Macro
+/** @defgroup PWR_Exported_Macro PWR Exported Macro
   * @{
   */
-
 /** @brief  macros configure the main internal regulator output voltage.
   * @param  __REGULATOR__: specifies the regulator output voltage to achieve
   *         a tradeoff between performance and power consumption when the device does
@@ -214,7 +224,7 @@
   *            @arg PWR_FLAG_SB: StandBy flag. This flag indicates that the system was
   *                  resumed from StandBy mode.
   *            @arg PWR_FLAG_PVDO: PVD Output. This flag is valid only if PVD is enabled 
-  *                  by the HAL_PWR_EnablePVD() function. The PVD is stopped by Standby mode
+  *                  by the HAL_PWR_EnablePVD() function. The PVD is stopped by Standby mode.
   *                  For this reason, this bit is equal to 0 after Standby or reset
   *                  until the PVDE bit is set.
   *            @arg PWR_FLAG_VREFINTRDY: Internal voltage reference (VREFINT) ready flag.
@@ -229,7 +239,7 @@
   *                 This bit is reset by hardware when the regulator is ready.
   * @retval The new state of __FLAG__ (TRUE or FALSE).
   */
-#define __HAL_PWR_GET_FLAG(__FLAG__) ((PWR->CSR & (__FLAG__)) == (__FLAG__))
+#define __HAL_PWR_GET_FLAG(__FLAG__)                  ((PWR->CSR & (__FLAG__)) == (__FLAG__))
 
 /** @brief  Clear the PWR's pending flags.
   * @param  __FLAG__: specifies the flag to clear.
@@ -237,53 +247,133 @@
   *            @arg PWR_FLAG_WU: Wake Up flag
   *            @arg PWR_FLAG_SB: StandBy flag
   */
-#define __HAL_PWR_CLEAR_FLAG(__FLAG__) (PWR->CR |=  (__FLAG__) << 2)
+#define __HAL_PWR_CLEAR_FLAG(__FLAG__)                SET_BIT(PWR->CR, (__FLAG__) << 2)
 
-#define PWR_EXTI_LINE_PVD  ((uint32_t)0x00010000)  /*!< External interrupt line 16 Connected to the PVD EXTI Line */
+/**
+  * @brief Enable interrupt on PVD Exti Line 16.
+  * @retval None.
+  */
+#define __HAL_PWR_PVD_EXTI_ENABLE_IT()      SET_BIT(EXTI->IMR, PWR_EXTI_LINE_PVD)
+
 /**
-  * @brief Enable the PVD Exti Line.
-  * @param  __EXTILINE__: specifies the PVD Exti sources to be enabled.
-  * This parameter can be:
-  *   @arg PWR_EXTI_LINE_PVD
+  * @brief Disable interrupt on PVD Exti Line 16. 
+  * @retval None.
+  */
+#define __HAL_PWR_PVD_EXTI_DISABLE_IT()     CLEAR_BIT(EXTI->IMR, PWR_EXTI_LINE_PVD)
+
+/**
+  * @brief Enable event on PVD Exti Line 16.
+  * @retval None.
+  */
+#define __HAL_PWR_PVD_EXTI_ENABLE_EVENT()   SET_BIT(EXTI->EMR, PWR_EXTI_LINE_PVD)
+
+/**
+  * @brief Disable event on PVD Exti Line 16.
   * @retval None.
   */
-#define __HAL_PVD_EXTI_ENABLE_IT(__EXTILINE__)   (EXTI->IMR |= (__EXTILINE__))
+#define __HAL_PWR_PVD_EXTI_DISABLE_EVENT()  CLEAR_BIT(EXTI->EMR, PWR_EXTI_LINE_PVD)
+
+
+/**
+  * @brief  PVD EXTI line configuration: set falling edge trigger.  
+  * @retval None.
+  */
+#define __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE()  SET_BIT(EXTI->FTSR, PWR_EXTI_LINE_PVD)
+
+
+/**
+  * @brief Disable the PVD Extended Interrupt Falling Trigger.
+  * @retval None.
+  */
+#define __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE()  CLEAR_BIT(EXTI->FTSR, PWR_EXTI_LINE_PVD)
+
 
 /**
-  * @brief Disable the PVD EXTI Line.
-  * @param  __EXTILINE__: specifies the PVD EXTI sources to be disabled.
-  * This parameter can be:
-  *  @arg PWR_EXTI_LINE_PVD
+  * @brief  PVD EXTI line configuration: set rising edge trigger.
   * @retval None.
   */
-#define __HAL_PVD_EXTI_DISABLE_IT(__EXTILINE__)  (EXTI->IMR &= ~(__EXTILINE__))
+#define __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE()   SET_BIT(EXTI->RTSR, PWR_EXTI_LINE_PVD)
+
+/**
+  * @brief Disable the PVD Extended Interrupt Rising Trigger.
+  * This parameter can be:
+  * @retval None.
+  */
+#define __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE()  CLEAR_BIT(EXTI->RTSR, PWR_EXTI_LINE_PVD)
+
+/**
+  * @brief  PVD EXTI line configuration: set rising & falling edge trigger.
+  * @retval None.
+  */
+#define __HAL_PWR_PVD_EXTI_ENABLE_RISING_FALLING_EDGE()   __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE();__HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE();
 
 /**
-  * @brief  Generates a Software interrupt on selected EXTI line.
-  * @param  __EXTILINE__: specifies the PVD EXTI sources to be disabled.
+  * @brief Disable the PVD Extended Interrupt Rising & Falling Trigger.
   * This parameter can be:
-  *  @arg PWR_EXTI_LINE_PVD
-  * @retval None
+  * @retval None.
+  */
+#define __HAL_PWR_PVD_EXTI_DISABLE_RISING_FALLING_EDGE()  __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE();__HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE()();
+
+
+
+/**
+  * @brief Check whether the specified PVD EXTI interrupt flag is set or not.
+  * @retval EXTI PVD Line Status.
   */
-#define __HAL_PVD_EXTI_GENERATE_SWIT(__EXTI_LINE__) (EXTI->SWIER |= (__EXTI_LINE__))
+#define __HAL_PWR_PVD_EXTI_GET_FLAG()       (EXTI->PR & (PWR_EXTI_LINE_PVD))
+
+/**
+  * @brief Clear the PVD EXTI flag.
+  * @retval None.
+  */
+#define __HAL_PWR_PVD_EXTI_CLEAR_FLAG()     (EXTI->PR = (PWR_EXTI_LINE_PVD))
+
+/**
+  * @brief Generate a Software interrupt on selected EXTI line.
+  * @retval None.
+  */
+#define __HAL_PWR_PVD_EXTI_GENERATE_SWIT()  SET_BIT(EXTI->SWIER, PWR_EXTI_LINE_PVD)
+/**
+  * @}
+  */
 
 /**
-  * @brief checks whether the specified PVD Exti interrupt flag is set or not.
-  * @param  __EXTILINE__: specifies the PVD Exti sources to be cleared.
-  * This parameter can be:
-  *   @arg PWR_EXTI_LINE_PVD
-  * @retval EXTI PVD Line Status.
+  * @brief Generate a Software interrupt on selected EXTI line.
+  * @retval None.
   */
-#define __HAL_PVD_EXTI_GET_FLAG(__EXTILINE__)  (EXTI->PR & (__EXTILINE__))
+#define __HAL_PWR_PVD_EXTI_GENERATE_SWIT()            SET_BIT(EXTI->SWIER, PWR_EXTI_LINE_PVD)
 
 /**
-  * @brief Clear the PVD Exti flag.
-  * @param  __EXTILINE__: specifies the PVD Exti sources to be cleared.
-  * This parameter can be:
-  *   @arg PWR_EXTI_LINE_PVD  
-  * @retval None.
+  * @}
+  */
+
+/** @defgroup PWR_Private_Macros PWR Private Macros
+  * @{
   */
-#define __HAL_PVD_EXTI_CLEAR_FLAG(__EXTILINE__)  (EXTI->PR = (__EXTILINE__))
+#define IS_PWR_PVD_LEVEL(LEVEL) (((LEVEL) == PWR_PVDLEVEL_0) || ((LEVEL) == PWR_PVDLEVEL_1)|| \
+                                 ((LEVEL) == PWR_PVDLEVEL_2) || ((LEVEL) == PWR_PVDLEVEL_3)|| \
+                                 ((LEVEL) == PWR_PVDLEVEL_4) || ((LEVEL) == PWR_PVDLEVEL_5)|| \
+                                 ((LEVEL) == PWR_PVDLEVEL_6) || ((LEVEL) == PWR_PVDLEVEL_7))
+
+#define IS_PWR_PVD_MODE(MODE) (((MODE) == PWR_PVD_MODE_IT_RISING)|| ((MODE) == PWR_PVD_MODE_IT_FALLING) || \
+                              ((MODE) == PWR_PVD_MODE_IT_RISING_FALLING) || ((MODE) == PWR_PVD_MODE_EVENT_RISING) || \
+                              ((MODE) == PWR_PVD_MODE_EVENT_FALLING) || ((MODE) == PWR_PVD_MODE_EVENT_RISING_FALLING) || \
+                              ((MODE) == PWR_PVD_MODE_NORMAL)) 
+
+#if defined (STM32L071xx) || defined (STM32L072xx) || defined (STM32L073xx) || defined (STM32L081xx) || defined (STM32L082xx) || defined (STM32L083xx)
+#define IS_PWR_WAKEUP_PIN(PIN) (((PIN) == PWR_WAKEUP_PIN1) || \
+                                ((PIN) == PWR_WAKEUP_PIN2) || \
+                                ((PIN) == PWR_WAKEUP_PIN3))
+#else
+#define IS_PWR_WAKEUP_PIN(PIN) (((PIN) == PWR_WAKEUP_PIN1) || \
+                                ((PIN) == PWR_WAKEUP_PIN2))
+#endif
+
+#define IS_PWR_REGULATOR(REGULATOR) (((REGULATOR) == PWR_MAINREGULATOR_ON) || \
+                                     ((REGULATOR) == PWR_LOWPOWERREGULATOR_ON))
+#define IS_PWR_SLEEP_ENTRY(ENTRY) (((ENTRY) == PWR_SLEEPENTRY_WFI) || ((ENTRY) == PWR_SLEEPENTRY_WFE))
+
+#define IS_PWR_STOP_ENTRY(ENTRY) (((ENTRY) == PWR_STOPENTRY_WFI) || ((ENTRY) == PWR_STOPENTRY_WFE))
 
 /**
   * @}
@@ -292,17 +382,30 @@
 /* Include PWR HAL Extension module */
 #include "stm32l0xx_hal_pwr_ex.h"
 
-/* Exported functions --------------------------------------------------------*/
-
-/* Initialization and de-initialization functions *******************************/
+/** @defgroup PWR_Exported_Functions PWR Exported Functions
+  * @{
+  */
+  
+/** @defgroup PWR_Exported_Functions_Group1 Initialization and de-initialization functions 
+  * @{
+  */
 void HAL_PWR_DeInit(void);
 void HAL_PWR_EnableBkUpAccess(void);
 void HAL_PWR_DisableBkUpAccess(void);
+/**
+  * @}
+  */
 
-/* Peripheral Control functions  ************************************************/
-void HAL_PWR_PVDConfig(PWR_PVDTypeDef *sConfigPVD);
+/** @defgroup PWR_Exported_Functions_Group2 Low Power modes configuration functions
+  * @{
+  */
+
+/* PVD control functions  ************************************************/
+void HAL_PWR_ConfigPVD(PWR_PVDTypeDef *sConfigPVD);
 void HAL_PWR_EnablePVD(void);
 void HAL_PWR_DisablePVD(void);
+void HAL_PWR_PVD_IRQHandler(void);
+void HAL_PWR_PVDCallback(void);
 
 /* WakeUp pins configuration functions ****************************************/
 void HAL_PWR_EnableWakeUpPin(uint32_t WakeUpPinx);
@@ -313,8 +416,18 @@
 void HAL_PWR_EnterSLEEPMode(uint32_t Regulator, uint8_t SLEEPEntry);
 void HAL_PWR_EnterSTANDBYMode(void);
 
-void HAL_PWR_PVD_IRQHandler(void);
-void HAL_PWR_PVDCallback(void);
+void HAL_PWR_EnableSleepOnExit(void);
+void HAL_PWR_DisableSleepOnExit(void);
+void HAL_PWR_EnableSEVOnPend(void);
+void HAL_PWR_DisableSEVOnPend(void);
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
 
 /**
   * @}
@@ -332,3 +445,4 @@
 #endif /* __STM32L0xx_HAL_PWR_H */
 
 /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+