USBHost library. NOTE: This library is only officially supported on the LPC1768 platform. For more information, please see the handbook page.
Dependencies: FATFileSystem mbed-rtos
Dependents: BTstack WallbotWii SD to Flash Data Transfer USBHost-MSD_HelloWorld ... more
Legacy Warning
This is an mbed 2 library. To learn more about mbed OS 5, visit the docs.
Pull requests against this repository are no longer supported. Please raise against mbed OS 5 as documented above.
targets/TARGET_STM/USBEndpoint_STM.cpp@40:7c3b59bb364e, 2017-08-17 (annotated)
- Committer:
- Anna Bridge
- Date:
- Thu Aug 17 18:12:22 2017 +0100
- Revision:
- 40:7c3b59bb364e
- Parent:
- 39:d96aa62afc5b
DISCO_L475VG_IOT01A: Add support of USBHost
Who changed what in which revision?
User | Revision | Line number | New contents of line |
---|---|---|---|
Kojto | 39:d96aa62afc5b | 1 | /* mbed USBHost Library |
Kojto | 39:d96aa62afc5b | 2 | * Copyright (c) 2006-2013 ARM Limited |
Kojto | 39:d96aa62afc5b | 3 | * |
Kojto | 39:d96aa62afc5b | 4 | * Licensed under the Apache License, Version 2.0 (the "License"); |
Kojto | 39:d96aa62afc5b | 5 | * you may not use this file except in compliance with the License. |
Kojto | 39:d96aa62afc5b | 6 | * You may obtain a copy of the License at |
Kojto | 39:d96aa62afc5b | 7 | * |
Kojto | 39:d96aa62afc5b | 8 | * http://www.apache.org/licenses/LICENSE-2.0 |
Kojto | 39:d96aa62afc5b | 9 | * |
Kojto | 39:d96aa62afc5b | 10 | * Unless required by applicable law or agreed to in writing, software |
Kojto | 39:d96aa62afc5b | 11 | * distributed under the License is distributed on an "AS IS" BASIS, |
Kojto | 39:d96aa62afc5b | 12 | * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
Kojto | 39:d96aa62afc5b | 13 | * See the License for the specific language governing permissions and |
Kojto | 39:d96aa62afc5b | 14 | * limitations under the License. |
Kojto | 39:d96aa62afc5b | 15 | */ |
Kojto | 39:d96aa62afc5b | 16 | #if defined(TARGET_STM) && defined(USBHOST_OTHER) |
Kojto | 39:d96aa62afc5b | 17 | |
Kojto | 39:d96aa62afc5b | 18 | #include "dbg.h" |
Kojto | 39:d96aa62afc5b | 19 | #include "USBEndpoint.h" |
Kojto | 39:d96aa62afc5b | 20 | extern uint32_t HAL_HCD_HC_GetMaxPacket(HCD_HandleTypeDef *hhcd, uint8_t chn_num); |
Kojto | 39:d96aa62afc5b | 21 | extern uint32_t HAL_HCD_HC_GetType(HCD_HandleTypeDef *hhcd, uint8_t chn_num); |
Kojto | 39:d96aa62afc5b | 22 | extern void HAL_HCD_DisableInt(HCD_HandleTypeDef* hhcd, uint8_t chn_num); |
Kojto | 39:d96aa62afc5b | 23 | extern void HAL_HCD_EnableInt(HCD_HandleTypeDef* hhcd, uint8_t chn_num); |
Kojto | 39:d96aa62afc5b | 24 | |
Kojto | 39:d96aa62afc5b | 25 | |
Kojto | 39:d96aa62afc5b | 26 | |
Kojto | 39:d96aa62afc5b | 27 | |
Kojto | 39:d96aa62afc5b | 28 | void USBEndpoint::init(HCED * hced_, ENDPOINT_TYPE type_, ENDPOINT_DIRECTION dir_, uint32_t size, uint8_t ep_number, HCTD* td_list_[2]) |
Kojto | 39:d96aa62afc5b | 29 | { |
Kojto | 39:d96aa62afc5b | 30 | HCD_HandleTypeDef *hhcd; |
Kojto | 39:d96aa62afc5b | 31 | uint32_t *addr; |
Kojto | 39:d96aa62afc5b | 32 | |
Kojto | 39:d96aa62afc5b | 33 | hced = hced_; |
Kojto | 39:d96aa62afc5b | 34 | type = type_; |
Kojto | 39:d96aa62afc5b | 35 | dir = dir_; |
Kojto | 39:d96aa62afc5b | 36 | setup = (type == CONTROL_ENDPOINT) ? true : false; |
Kojto | 39:d96aa62afc5b | 37 | |
Kojto | 39:d96aa62afc5b | 38 | //TDs have been allocated by the host |
Kojto | 39:d96aa62afc5b | 39 | memcpy((HCTD**)td_list, td_list_, sizeof(HCTD*)*2); //TODO: Maybe should add a param for td_list size... at least a define |
Kojto | 39:d96aa62afc5b | 40 | memset(td_list_[0], 0, sizeof(HCTD)); |
Kojto | 39:d96aa62afc5b | 41 | memset(td_list_[1], 0, sizeof(HCTD)); |
Kojto | 39:d96aa62afc5b | 42 | |
Kojto | 39:d96aa62afc5b | 43 | td_list[0]->ep = this; |
Kojto | 39:d96aa62afc5b | 44 | td_list[1]->ep = this; |
Kojto | 39:d96aa62afc5b | 45 | |
Kojto | 39:d96aa62afc5b | 46 | address = (ep_number & 0x7F) | ((dir - 1) << 7); |
Kojto | 39:d96aa62afc5b | 47 | this->size = size; |
Kojto | 39:d96aa62afc5b | 48 | this->ep_number = ep_number; |
Kojto | 39:d96aa62afc5b | 49 | transfer_len = 0; |
Kojto | 39:d96aa62afc5b | 50 | transferred = 0; |
Kojto | 39:d96aa62afc5b | 51 | buf_start = 0; |
Kojto | 39:d96aa62afc5b | 52 | nextEp = NULL; |
Kojto | 39:d96aa62afc5b | 53 | |
Kojto | 39:d96aa62afc5b | 54 | td_current = td_list[0]; |
Kojto | 39:d96aa62afc5b | 55 | td_next = td_list[1]; |
Kojto | 39:d96aa62afc5b | 56 | /* remove potential post pending from previous endpoint */ |
Kojto | 39:d96aa62afc5b | 57 | ep_queue.get(0); |
Kojto | 39:d96aa62afc5b | 58 | intf_nb = 0; |
Kojto | 39:d96aa62afc5b | 59 | hhcd = (HCD_HandleTypeDef*)hced->hhcd; |
Kojto | 39:d96aa62afc5b | 60 | addr = &((uint32_t *)hhcd->pData)[hced->ch_num]; |
Kojto | 39:d96aa62afc5b | 61 | *addr = 0; |
Kojto | 39:d96aa62afc5b | 62 | state = USB_TYPE_IDLE; |
Kojto | 39:d96aa62afc5b | 63 | speed =false; |
Kojto | 39:d96aa62afc5b | 64 | } |
Kojto | 39:d96aa62afc5b | 65 | void USBEndpoint::setSize(uint32_t size) |
Kojto | 39:d96aa62afc5b | 66 | { |
Kojto | 39:d96aa62afc5b | 67 | this->size = size; |
Kojto | 39:d96aa62afc5b | 68 | } |
Kojto | 39:d96aa62afc5b | 69 | |
Kojto | 39:d96aa62afc5b | 70 | |
Kojto | 39:d96aa62afc5b | 71 | void USBEndpoint::setDeviceAddress(uint8_t addr) |
Kojto | 39:d96aa62afc5b | 72 | { |
Kojto | 39:d96aa62afc5b | 73 | HCD_HandleTypeDef *hhcd; |
Kojto | 39:d96aa62afc5b | 74 | uint8_t hcd_speed = HCD_SPEED_FULL; |
Kojto | 39:d96aa62afc5b | 75 | /* fix me : small speed device with hub not supported |
Kojto | 39:d96aa62afc5b | 76 | if (this->speed) hcd_speed = HCD_SPEED_LOW; */ |
Kojto | 39:d96aa62afc5b | 77 | if (this->speed) { |
Kojto | 39:d96aa62afc5b | 78 | USB_WARN("small speed device on hub not supported"); |
Kojto | 39:d96aa62afc5b | 79 | } |
Kojto | 39:d96aa62afc5b | 80 | MBED_ASSERT(HAL_HCD_HC_Init((HCD_HandleTypeDef*)hced->hhcd,hced->ch_num, address, addr, hcd_speed, type, size)!=HAL_BUSY); |
Kojto | 39:d96aa62afc5b | 81 | this->device_address = addr; |
Kojto | 39:d96aa62afc5b | 82 | |
Kojto | 39:d96aa62afc5b | 83 | } |
Kojto | 39:d96aa62afc5b | 84 | |
Kojto | 39:d96aa62afc5b | 85 | void USBEndpoint::setSpeed(uint8_t speed) |
Kojto | 39:d96aa62afc5b | 86 | { |
Kojto | 39:d96aa62afc5b | 87 | this->speed = speed; |
Kojto | 39:d96aa62afc5b | 88 | } |
Kojto | 39:d96aa62afc5b | 89 | |
Kojto | 39:d96aa62afc5b | 90 | |
Kojto | 39:d96aa62afc5b | 91 | |
Kojto | 39:d96aa62afc5b | 92 | void USBEndpoint::setState(USB_TYPE st) |
Kojto | 39:d96aa62afc5b | 93 | { |
Kojto | 39:d96aa62afc5b | 94 | /* modify this state is possible only with a plug */ |
Kojto | 39:d96aa62afc5b | 95 | if (state == USB_TYPE_FREE) { |
Kojto | 39:d96aa62afc5b | 96 | return; |
Kojto | 39:d96aa62afc5b | 97 | } |
Kojto | 39:d96aa62afc5b | 98 | |
Kojto | 39:d96aa62afc5b | 99 | state = st; |
Kojto | 39:d96aa62afc5b | 100 | if (st == USB_TYPE_FREE) { |
Kojto | 39:d96aa62afc5b | 101 | HCD_HandleTypeDef *hhcd = (HCD_HandleTypeDef*)hced->hhcd; |
Kojto | 39:d96aa62afc5b | 102 | uint32_t *addr = &((uint32_t *)hhcd->pData)[hced->ch_num]; |
Kojto | 39:d96aa62afc5b | 103 | if ((*addr) && (type != INTERRUPT_ENDPOINT)) { |
Kojto | 39:d96aa62afc5b | 104 | this->ep_queue.put((uint8_t*)1); |
Kojto | 39:d96aa62afc5b | 105 | } |
Kojto | 39:d96aa62afc5b | 106 | MBED_ASSERT(HAL_HCD_HC_Halt((HCD_HandleTypeDef*)hced->hhcd, hced->ch_num)!=HAL_BUSY); |
Kojto | 39:d96aa62afc5b | 107 | HAL_HCD_DisableInt((HCD_HandleTypeDef*)hced->hhcd, hced->ch_num); |
Kojto | 39:d96aa62afc5b | 108 | *addr = 0; |
Kojto | 39:d96aa62afc5b | 109 | |
Kojto | 39:d96aa62afc5b | 110 | } |
Kojto | 39:d96aa62afc5b | 111 | if (st == USB_TYPE_ERROR) { |
Kojto | 39:d96aa62afc5b | 112 | MBED_ASSERT(HAL_HCD_HC_Halt((HCD_HandleTypeDef*)hced->hhcd, hced->ch_num)!=HAL_BUSY); |
Kojto | 39:d96aa62afc5b | 113 | HAL_HCD_DisableInt((HCD_HandleTypeDef*)hced->hhcd, hced->ch_num); |
Kojto | 39:d96aa62afc5b | 114 | |
Kojto | 39:d96aa62afc5b | 115 | } |
Kojto | 39:d96aa62afc5b | 116 | if (st == USB_TYPE_ERROR) { |
Kojto | 39:d96aa62afc5b | 117 | uint8_t hcd_speed = HCD_SPEED_FULL; |
Kojto | 39:d96aa62afc5b | 118 | /* small speed device with hub not supported |
Kojto | 39:d96aa62afc5b | 119 | if (this->speed) hcd_speed = HCD_SPEED_LOW;*/ |
Kojto | 39:d96aa62afc5b | 120 | MBED_ASSERT(HAL_HCD_HC_Init((HCD_HandleTypeDef*)hced->hhcd,hced->ch_num, address, 0, hcd_speed, type, size)!=HAL_BUSY); |
Kojto | 39:d96aa62afc5b | 121 | } |
Kojto | 39:d96aa62afc5b | 122 | } |
Kojto | 39:d96aa62afc5b | 123 | |
Kojto | 39:d96aa62afc5b | 124 | |
Kojto | 39:d96aa62afc5b | 125 | extern uint32_t HAL_HCD_HC_GetMaxPacket(HCD_HandleTypeDef *hhcd, uint8_t chn_num); |
Kojto | 39:d96aa62afc5b | 126 | extern uint32_t HAL_HCD_HC_GetType(HCD_HandleTypeDef *hhcd, uint8_t chn_num); |
Kojto | 39:d96aa62afc5b | 127 | |
Kojto | 39:d96aa62afc5b | 128 | |
Kojto | 39:d96aa62afc5b | 129 | USB_TYPE USBEndpoint::queueTransfer() |
Kojto | 39:d96aa62afc5b | 130 | { |
Kojto | 39:d96aa62afc5b | 131 | HCD_HandleTypeDef *hhcd = (HCD_HandleTypeDef*)hced->hhcd; |
Kojto | 39:d96aa62afc5b | 132 | uint32_t *addr = &((uint32_t *)hhcd->pData)[hced->ch_num]; |
Kojto | 39:d96aa62afc5b | 133 | uint32_t type = HAL_HCD_HC_GetType(hhcd, hced->ch_num); |
Kojto | 39:d96aa62afc5b | 134 | uint32_t max_size = HAL_HCD_HC_GetMaxPacket(hhcd, hced->ch_num); |
Kojto | 39:d96aa62afc5b | 135 | /* if a packet is queue on disconnected ; no solution for now */ |
Kojto | 39:d96aa62afc5b | 136 | if (state == USB_TYPE_FREE) { |
Kojto | 39:d96aa62afc5b | 137 | td_current->state = USB_TYPE_FREE; |
Kojto | 39:d96aa62afc5b | 138 | return USB_TYPE_FREE; |
Kojto | 39:d96aa62afc5b | 139 | } |
Kojto | 39:d96aa62afc5b | 140 | ep_queue.get(0); |
Kojto | 39:d96aa62afc5b | 141 | MBED_ASSERT(*addr ==0); |
Kojto | 39:d96aa62afc5b | 142 | transfer_len = td_current->size <= max_size ? td_current->size : max_size; |
Kojto | 39:d96aa62afc5b | 143 | buf_start = (uint8_t *)td_current->currBufPtr; |
Kojto | 39:d96aa62afc5b | 144 | |
Kojto | 39:d96aa62afc5b | 145 | //Now add this free TD at this end of the queue |
Kojto | 39:d96aa62afc5b | 146 | state = USB_TYPE_PROCESSING; |
Kojto | 39:d96aa62afc5b | 147 | /* one request */ |
Kojto | 39:d96aa62afc5b | 148 | td_current->nextTD = (hcTd*)0; |
Kojto | 39:d96aa62afc5b | 149 | #if defined(MAX_NYET_RETRY) |
Kojto | 39:d96aa62afc5b | 150 | td_current->retry = 0; |
Kojto | 39:d96aa62afc5b | 151 | #endif |
Kojto | 39:d96aa62afc5b | 152 | td_current->setup = setup; |
Kojto | 39:d96aa62afc5b | 153 | *addr = (uint32_t)td_current; |
Kojto | 39:d96aa62afc5b | 154 | /* dir /setup is inverted for ST */ |
Kojto | 39:d96aa62afc5b | 155 | /* token is useful only ctrl endpoint */ |
Kojto | 39:d96aa62afc5b | 156 | /* last parameter is ping ? */ |
Kojto | 39:d96aa62afc5b | 157 | MBED_ASSERT(HAL_HCD_HC_SubmitRequest((HCD_HandleTypeDef*)hced->hhcd, hced->ch_num, dir-1, type,!setup,(uint8_t*) td_current->currBufPtr, transfer_len, 0)==HAL_OK); |
Kojto | 39:d96aa62afc5b | 158 | HAL_HCD_EnableInt((HCD_HandleTypeDef*)hced->hhcd, hced->ch_num); |
Kojto | 39:d96aa62afc5b | 159 | |
Kojto | 39:d96aa62afc5b | 160 | return USB_TYPE_PROCESSING; |
Kojto | 39:d96aa62afc5b | 161 | } |
Kojto | 39:d96aa62afc5b | 162 | |
Kojto | 39:d96aa62afc5b | 163 | void USBEndpoint::unqueueTransfer(volatile HCTD * td) |
Kojto | 39:d96aa62afc5b | 164 | { |
Kojto | 39:d96aa62afc5b | 165 | if (state==USB_TYPE_FREE) { |
Kojto | 39:d96aa62afc5b | 166 | return; |
Kojto | 39:d96aa62afc5b | 167 | } |
Kojto | 39:d96aa62afc5b | 168 | uint32_t *addr = &((uint32_t *)((HCD_HandleTypeDef*)hced->hhcd)->pData)[hced->ch_num]; |
Kojto | 39:d96aa62afc5b | 169 | td->state=0; |
Kojto | 39:d96aa62afc5b | 170 | td->currBufPtr=0; |
Kojto | 39:d96aa62afc5b | 171 | td->size=0; |
Kojto | 39:d96aa62afc5b | 172 | td->nextTD=0; |
Kojto | 39:d96aa62afc5b | 173 | *addr = 0; |
Kojto | 39:d96aa62afc5b | 174 | td_current = td_next; |
Kojto | 39:d96aa62afc5b | 175 | td_next = td; |
Kojto | 39:d96aa62afc5b | 176 | } |
Kojto | 39:d96aa62afc5b | 177 | |
Kojto | 39:d96aa62afc5b | 178 | void USBEndpoint::queueEndpoint(USBEndpoint * ed) |
Kojto | 39:d96aa62afc5b | 179 | { |
Kojto | 39:d96aa62afc5b | 180 | nextEp = ed; |
Kojto | 39:d96aa62afc5b | 181 | } |
Kojto | 39:d96aa62afc5b | 182 | #endif |