Diff: main.cpp

Revision:

7:034887f17fb2

Parent:

6:dc3fa898ae44

--- a/main.cpp	Tue Jan 15 14:15:16 2019 +0000
+++ b/main.cpp	Fri Jan 18 12:36:57 2019 +0000
@@ -1,9 +1,10 @@
 #include "mbed.h"
 #include "FlashAir_iSDIO.h"
+#include "SDFileSystem.h"
 #include "USBSerial.h"
 #include "ADT7410.h"
 
-//#define USE_ADT7410
+#define USE_ADT7410
 //-------------------------------------------------------------------------------
 //Port Settings
 DigitalOut led1(LED1);
@@ -30,10 +31,11 @@
 DigitalOut sM(P0_2,0);
 DigitalOut sDP(P1_25,0);
 DigitalOut SD_VEN(P1_16);
-Serial console(P0_19, P0_18); // TX, RX
-FlashAir_iSDIO sd(P0_21, P0_22, P1_15, P0_17, "sd", &console); // mosi(CMD), miso(DAT0), sclk(CLK), cs(DAT3)
+//Serial console(P0_19, P0_18); // TX, RX
+//FlashAir_iSDIO sd(P0_21, P0_22, P1_15, P0_17, "sd", &console); // mosi(CMD), miso(DAT0), sclk(CLK), cs(DAT3)
+SDFileSystem sd(P0_21, P0_22, P1_15, P0_17, "sd"); // mosi(CMD), miso(DAT0), sclk(CLK), cs(DAT3)
 
-USBSerial serial;
+//USBSerial serial;
 #ifdef USE_ADT7410
 ADT7410 sensor(P0_5, P0_4, 0x90, 100000);
 #else
@@ -54,9 +56,9 @@
         // 1. get sequenceID
         // 2. issue disconnect command
         // 3. wait response 
-        sequenceId = sd.getNextSequenceId();
-        sd.wlan_disconnect(sequenceId);
-        sd.waitResponse(sequenceId);
+        //sequenceId = sd.getNextSequenceId();
+        //sd.wlan_disconnect(sequenceId);
+        //sd.waitResponse(sequenceId);
         wlan_connected =0;
         led1 = 0;
         wait(5.0);
@@ -65,11 +67,11 @@
         // 1. get sequenceID
         // 2. issue establish command
         // 3. wait resoonse        
-        sequenceId = sd.getNextSequenceId();
-        sd.wlan_establish(sequenceId, "isdiotest", "12345678", FlashAir_iSDIO::ENCMODE_WPA2PSK_AES);
-        sd.waitResponse(sequenceId);
+//        sequenceId = sd.getNextSequenceId();
+//        sd.wlan_establish(sequenceId, "isdiotest", "12345678", FlashAir_iSDIO::ENCMODE_WPA2PSK_AES);
+//        sd.waitResponse(sequenceId);
         led1 = 1;
-        wlan_connected =1;
+//        wlan_connected =1;
         wait(5.0);
     
     }
@@ -80,7 +82,7 @@
     char testdata[] = TESTDATA;
     uint8_t data[sizeof(testdata)];
     memcpy(data, &testdata, sizeof(data));
-    sd.write_shared_mem(0x0, data, sizeof(data));
+//    sd.write_shared_mem(0x0, data, sizeof(data));
     wait(3.0);
 }
 
@@ -115,27 +117,27 @@
 
 int out_file(int val)
 {
-    FILE *fd = fopen("/sd/temp.text", "a");
+    FILE *fd = fopen("/sd/test.txt", "a");
     fprintf(fd, "%d,", val);
     fclose(fd);    
 }
 
 int main()
 {
-     console.printf("Hello FlashAIr_iSDIO_16seg_ADT7410\n");
-     SD_VEN = 1;
+    //console.printf("Hello FlashAIr_iSDIO_16seg_ADT7410\n");
+    SD_VEN = 1;
     // Initialize card
-    FILE *fp = fopen("/sd/isdio.txt", "w");
-    fclose(fp);
+//    FILE *fp = fopen("/sd/isdio.txt", "w");
+//    fclose(fp);
     
 #ifdef USE_ADT7410
     sensor.reset();
 #endif
 
     // disconnect anyway    
-    sequenceId = sd.getNextSequenceId();
-    sd.wlan_disconnect(sequenceId);
-    sd.waitResponse(sequenceId);
+//    sequenceId = sd.getNextSequenceId();
+//    sd.wlan_disconnect(sequenceId);
+//    sd.waitResponse(sequenceId);
     
     // register interrupt handler
     sw.rise(&sw_int);
@@ -151,7 +153,7 @@
 #endif        
         seg_disp(senseval);
         out_file(senseval);
-        serial.printf("%d\n",senseval);
+        //serial.printf("%d\n",senseval);
         i++;
 #ifndef USE_ADT7410
         if(i>=DUMMYVALLEN) i=0;