MEMS pressure sensor by STMicroelectronics. FIFO Hardware digital filter as default.
Dependents: WeatherSensor-Joe PAG-CourseWork-NicksEdits SOFT253_Assignment SOFT253_Assignment_V2 ... more
Fork of LPS25H by
LPS25H.h
- Committer:
- kenjiArai
- Date:
- 2015-02-22
- Revision:
- 0:8fc511bd51af
File content as of revision 0:8fc511bd51af:
/* * mbed library program * LPS25H MEMS pressure sensor: 260-1260 hPa absolute digital output barometer * made by STMicroelectronics * http://www.st-japan.co.jp/web/catalog/sense_power/FM89/SC1316/PF255230 * * Copyright (c) 2015 Kenji Arai / JH1PJL * http://www.page.sannet.ne.jp/kenjia/index.html * http://mbed.org/users/kenjiArai/ * Created: Feburary 21st, 2015 * Revised: Feburary 22nd, 2015 * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, * INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE * AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. */ /* *---------------- REFERENCE ---------------------------------------------------------------------- * Original Information * http://www.st-japan.co.jp/web/jp/catalog/sense_power/FM89/SC1316/PF255230 * AN4450 Application Note (as follows) * http://www.st.com/st-web-ui/static/active/jp/ * resource/technical/document/application_note/DM00108837.pdf * Device kit * http://akizukidenshi.com/catalog/g/gK-08338/ */ #ifndef LPS25H_H #define LPS25H_H #include "mbed.h" // LPS25H Address // 7bit address = 0b101110x(0x5c or 0x5d depends on SA0/SDO) #define LPS25H_G_CHIP_ADDR (0x5c << 1) // SA0(=SDO pin) = Ground #define LPS25H_V_CHIP_ADDR (0x5d << 1) // SA0(=SDO pin) = Vdd // MODE Selection #define FIFO_HW_FILTER 1 #define FIFO_BYPASS 0 // LPS25H ID #define I_AM_LPS25H 0xbd // Register's definition #define LPS25H_WHO_AM_I 0x0f #define LPS25H_RES_CONF 0x10 #define LPS25H_CTRL_REG1 0x20 #define LPS25H_CTRL_REG2 0x21 #define LPS25H_CTRL_REG3 0x22 #define LPS25H_CTRL_REG4 0x23 #define LPS25H_STATUS_REG 0x27 #define LPS25H_PRESS_POUT_XL 0x28 #define LPS25H_PRESS_OUT_L 0x29 #define LPS25H_PRESS_OUT_H 0x2a #define LPS25H_TEMP_OUT_L 0x2b #define LPS25H_TEMP_OUT_H 0x2c #define LPS25H_FIFO_CTRL 0x2e #define LPS25H_FIFO_STATUS 0x2e // Control Reg. #define PD (0UL << 7) #define ACTIVE (1UL << 7) #define ODR_ONESHOT (0UL << 4) #define ODR_1HZ (1UL << 4) #define ODR_7HZ (1UL << 4) #define ODR_12R5HZ (2UL << 4) #define ODR_25HZ (3UL << 4) #define BDU_SET (1UL << 2) #define CR_STD_SET (ACTIVE + ODR_7HZ + BDU_SET) // FIFO Control #define FIFO_MEAN_MODE 0xc0 #define FIFO_SAMPLE_2 0x01 #define FIFO_SAMPLE_4 0x03 #define FIFO_SAMPLE_8 0x07 #define FIFO_SAMPLE_16 0x0f #define FIFO_SAMPLE_32 0x1f /** Interface for STMicronics MEMS pressure sensor * Chip: LPS25H * * @code * #include "mbed.h" * #include "LPS25H.h" * * // I2C Communication * LPS25H baro(p_sda, p_scl, LPS25H_G_CHIP_ADDR); * // If you connected I2C line not only this device but also other devices, * // you need to declare following method. * I2C i2c(dp5,dp27); // SDA, SCL * LPS25H baro(i2c, LPS25H_G_CHIP_ADDR); * * int main() { * while( trure){ * baro.get(); * printf("Presere: 0x%6.1f, Temperature: 0x%+4.1f\r\n", baro.pressue(), baro.temperature()); * wait(1.0); * } * } * @endcode */ class LPS25H { public: /** Configure data pin * @param data SDA and SCL pins * @param device address LPS25H(SA0=0 or 1), LPS25H_G_CHIP_ADDR or LPS25H_V_CHIP_ADDR * @param Operation mode FIFO_HW_FILTER(default) or FIFO_BYPASS (Option parameter) */ LPS25H(PinName p_sda, PinName p_scl, uint8_t addr); LPS25H(PinName p_sda, PinName p_scl, uint8_t addr, uint8_t mode); /** Configure data pin (with other devices on I2C line) * @param I2C previous definition * @param device address LPS25H(SA0=0 or 1), LPS25H_G_CHIP_ADDR or LPS25H_V_CHIP_ADDR * @param Operation mode FIFO_HW_FILTER(default) or FIFO_BYPASS (Option parameter) */ LPS25H(I2C& p_i2c, uint8_t addr); LPS25H(I2C& p_i2c, uint8_t addr, uint8_t mode); /** Start convertion & data save * @param none * @return none */ void get(void); /** Read pressure data * @param none * @return humidity */ float pressure(void); /** Read temperature data * @param none * @return temperature */ float temperature(void); /** Read a ID number * @param none * @return if STM MEMS LPS25H, it should be I_AM_ LPS25H */ uint8_t read_id(void); /** Read Data Ready flag * @param none * @return 1 = Ready */ uint8_t data_ready(void); /** Set I2C clock frequency * @param freq. * @return none */ void frequency(int hz); /** Read register (general purpose) * @param register's address * @return register data */ uint8_t read_reg(uint8_t addr); /** Write register (general purpose) * @param register's address * @param data * @return none */ void write_reg(uint8_t addr, uint8_t data); protected: I2C _i2c; void init(void); private: char dt[6]; // working buffer uint8_t LPS25H_addr; // Sensor address uint8_t LPS25H_id; // ID uint8_t LPS25H_ready; // Device is on I2C line = 1, not = 0 uint8_t LPS25H_mode; // Operation mode uint32_t press; // pressure raw data int16_t temp; // temperature raw data }; #endif // LPS25H_H