Marco Ferreira
just a fork
Fork of
BLE_API
by 
Bluetooth Low Energy
Diff: ble/BLE.h
- Revision:
- 1144:249843612f87
- Parent:
- 1142:a358d0d20f62
- Child:
- 1155:e28c7aac64ab
diff -r 4788b7c9cb49 -r 249843612f87 ble/BLE.h
--- a/ble/BLE.h Wed Apr 06 19:14:11 2016 +0100
+++ b/ble/BLE.h Wed Apr 06 19:14:12 2016 +0100
@@ -275,10 +275,9 @@
* Set the BTLE MAC address and type.
* @return BLE_ERROR_NONE on success.
*
- * @note This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from Gap directly. A former call to
- * ble.setAddress(...) should be replaced with
- * ble.gap().setAddress(...).
+ * @deprecated You should use the parallel API from Gap directly. A former call to
+ * ble.setAddress(...) should be replaced with
+ * ble.gap().setAddress(...).
*/
ble_error_t setAddress(BLEProtocol::AddressType_t type, const BLEProtocol::AddressBytes_t address) {
return gap().setAddress(type, address);
@@ -288,10 +287,9 @@
* Fetch the Bluetooth Low Energy MAC address and type.
* @return BLE_ERROR_NONE on success.
*
- * @note This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from Gap directly. A former call to
- * ble.getAddress(...) should be replaced with
- * ble.gap().getAddress(...).
+ * @deprecated You should use the parallel API from Gap directly. A former call to
+ * ble.getAddress(...) should be replaced with
+ * ble.gap().getAddress(...).
*/
ble_error_t getAddress(BLEProtocol::AddressType_t *typeP, BLEProtocol::AddressBytes_t address) {
return gap().getAddress(typeP, address);
@@ -300,10 +298,9 @@
/**
* Set the GAP advertising mode to use for this device.
*
- * @note This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from Gap directly. A former call to
- * ble.setAdvertisingType(...) should be replaced with
- * ble.gap().setAdvertisingType(...).
+ * @deprecated You should use the parallel API from Gap directly. A former call to
+ * ble.setAdvertisingType(...) should be replaced with
+ * ble.gap().setAdvertisingType(...).
*/
void setAdvertisingType(GapAdvertisingParams::AdvertisingType advType) {
gap().setAdvertisingType(advType);
@@ -324,10 +321,9 @@
* peripheral faster, at the expense of more power being used by the radio
* due to the higher data transmit rate.
*
- * @note This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from Gap directly. A former call to
- * ble.setAdvertisingInterval(...) should be replaced with
- * ble.gap().setAdvertisingInterval(...).
+ * @deprecated You should use the parallel API from Gap directly. A former call to
+ * ble.setAdvertisingInterval(...) should be replaced with
+ * ble.gap().setAdvertisingInterval(...).
*
* @note WARNING: This API previously used 0.625ms as the unit for its
* 'interval' argument. That required an explicit conversion from
@@ -342,10 +338,9 @@
/**
* @return Minimum Advertising interval in milliseconds.
*
- * @note This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from Gap directly. A former call to
- * ble.getMinAdvertisingInterval(...) should be replaced with
- * ble.gap().getMinAdvertisingInterval(...).
+ * @deprecated You should use the parallel API from Gap directly. A former call to
+ * ble.getMinAdvertisingInterval(...) should be replaced with
+ * ble.gap().getMinAdvertisingInterval(...).
*/
uint16_t getMinAdvertisingInterval(void) const {
return gap().getMinAdvertisingInterval();
@@ -354,10 +349,9 @@
/**
* @return Minimum Advertising interval in milliseconds for non-connectible mode.
*
- * @note This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from Gap directly. A former call to
- * ble.getMinNonConnectableAdvertisingInterval(...) should be replaced with
- * ble.gap().getMinNonConnectableAdvertisingInterval(...).
+ * @deprecated You should use the parallel API from Gap directly. A former call to
+ * ble.getMinNonConnectableAdvertisingInterval(...) should be replaced with
+ * ble.gap().getMinNonConnectableAdvertisingInterval(...).
*/
uint16_t getMinNonConnectableAdvertisingInterval(void) const {
return gap().getMinNonConnectableAdvertisingInterval();
@@ -366,10 +360,9 @@
/**
* @return Maximum Advertising interval in milliseconds.
*
- * @note This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from Gap directly. A former call to
- * ble.getMaxAdvertisingInterval(...) should be replaced with
- * ble.gap().getMaxAdvertisingInterval(...).
+ * @deprecated You should use the parallel API from Gap directly. A former call to
+ * ble.getMaxAdvertisingInterval(...) should be replaced with
+ * ble.gap().getMaxAdvertisingInterval(...).
*/
uint16_t getMaxAdvertisingInterval(void) const {
return gap().getMaxAdvertisingInterval();
@@ -380,10 +373,9 @@
* Advertising timeout (in seconds) between 0x1 and 0x3FFF (1
* and 16383). Use 0 to disable the advertising timeout.
*
- * @note This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from Gap directly. A former call to
- * ble.setAdvertisingTimeout(...) should be replaced with
- * ble.gap().setAdvertisingTimeout(...).
+ * @deprecated You should use the parallel API from Gap directly. A former call to
+ * ble.setAdvertisingTimeout(...) should be replaced with
+ * ble.gap().setAdvertisingTimeout(...).
*/
void setAdvertisingTimeout(uint16_t timeout) {
gap().setAdvertisingTimeout(timeout);
@@ -395,10 +387,9 @@
* directly; there are other APIs to tweak advertisement parameters
* individually (see above).
*
- * @note This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from Gap directly. A former call to
- * ble.setAdvertisingParams(...) should be replaced with
- * ble.gap().setAdvertisingParams(...).
+ * @deprecated You should use the parallel API from Gap directly. A former call to
+ * ble.setAdvertisingParams(...) should be replaced with
+ * ble.gap().setAdvertisingParams(...).
*/
void setAdvertisingParams(const GapAdvertisingParams &advParams) {
gap().setAdvertisingParams(advParams);
@@ -408,10 +399,9 @@
* @return Read back advertising parameters. Useful for storing and
* restoring parameters rapidly.
*
- * @note This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from Gap directly. A former call to
- * ble.getAdvertisingParams(...) should be replaced with
- * ble.gap().getAdvertisingParams(...).
+ * @deprecated You should use the parallel API from Gap directly. A former call to
+ * ble.getAdvertisingParams(...) should be replaced with
+ * ble.gap().getAdvertisingParams(...).
*/
const GapAdvertisingParams &getAdvertisingParams(void) const {
return gap().getAdvertisingParams();
@@ -428,10 +418,9 @@
* GapAdvertisingData::Flags for valid flags. Multiple
* flags may be specified in combination.
*
- * @note This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from Gap directly. A former call to
- * ble.accumulateAdvertisingPayload(flags) should be replaced with
- * ble.gap().accumulateAdvertisingPayload(flags).
+ * @deprecated You should use the parallel API from Gap directly. A former call to
+ * ble.accumulateAdvertisingPayload(flags) should be replaced with
+ * ble.gap().accumulateAdvertisingPayload(flags).
*/
ble_error_t accumulateAdvertisingPayload(uint8_t flags) {
return gap().accumulateAdvertisingPayload(flags);
@@ -446,10 +435,9 @@
* @param[in] app
* The appearance of the peripheral.
*
- * @note This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from Gap directly. A former call to
- * ble.accumulateAdvertisingPayload(appearance) should be replaced with
- * ble.gap().accumulateAdvertisingPayload(appearance).
+ * @deprecated You should use the parallel API from Gap directly. A former call to
+ * ble.accumulateAdvertisingPayload(appearance) should be replaced with
+ * ble.gap().accumulateAdvertisingPayload(appearance).
*/
ble_error_t accumulateAdvertisingPayload(GapAdvertisingData::Appearance app) {
return gap().accumulateAdvertisingPayload(app);
@@ -465,10 +453,9 @@
* The max transmit power to be used by the controller. This
* is only a hint.
*
- * @note This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from Gap directly. A former call to
- * ble.accumulateAdvertisingPayloadTxPower(txPower) should be replaced with
- * ble.gap().accumulateAdvertisingPayloadTxPower(txPower).
+ * @deprecated You should use the parallel API from Gap directly. A former call to
+ * ble.accumulateAdvertisingPayloadTxPower(txPower) should be replaced with
+ * ble.gap().accumulateAdvertisingPayloadTxPower(txPower).
*/
ble_error_t accumulateAdvertisingPayloadTxPower(int8_t power) {
return gap().accumulateAdvertisingPayloadTxPower(power);
@@ -484,10 +471,9 @@
* @param data Data bytes.
* @param len Data length.
*
- * @note This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from Gap directly. A former call to
- * ble.accumulateAdvertisingPayload(...) should be replaced with
- * ble.gap().accumulateAdvertisingPayload(...).
+ * @deprecated You should use the parallel API from Gap directly. A former call to
+ * ble.accumulateAdvertisingPayload(...) should be replaced with
+ * ble.gap().accumulateAdvertisingPayload(...).
*/
ble_error_t accumulateAdvertisingPayload(GapAdvertisingData::DataType type, const uint8_t *data, uint8_t len) {
return gap().accumulateAdvertisingPayload(type, data, len);
@@ -498,10 +484,9 @@
* underlying stack. It would be uncommon for this API to be used directly;
* there are other APIs to build an advertisement payload (see above).
*
- * @note This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from Gap directly. A former call to
- * ble.setAdvertisingData(...) should be replaced with
- * ble.gap().setAdvertisingPayload(...).
+ * @deprecated You should use the parallel API from Gap directly. A former call to
+ * ble.setAdvertisingData(...) should be replaced with
+ * ble.gap().setAdvertisingPayload(...).
*/
ble_error_t setAdvertisingData(const GapAdvertisingData &advData) {
return gap().setAdvertisingPayload(advData);
@@ -511,10 +496,9 @@
* @return Read back advertising data. Useful for storing and
* restoring payload.
*
- * @note This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from Gap directly. A former call to
- * ble.getAdvertisingData(...) should be replaced with
- * ble.gap().getAdvertisingPayload()(...).
+ * @deprecated You should use the parallel API from Gap directly. A former call to
+ * ble.getAdvertisingData(...) should be replaced with
+ * ble.gap().getAdvertisingPayload()(...).
*/
const GapAdvertisingData &getAdvertisingData(void) const {
return gap().getAdvertisingPayload();
@@ -525,24 +509,25 @@
* accumulateAdvertisingPayload(). This automatically propagates the re-
* initialized advertising payload to the underlying stack.
*
- * @note This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from Gap directly. A former call to
- * ble.clearAdvertisingPayload(...) should be replaced with
- * ble.gap().clearAdvertisingPayload(...).
+ * @deprecated You should use the parallel API from Gap directly. A former call to
+ * ble.clearAdvertisingPayload(...) should be replaced with
+ * ble.gap().clearAdvertisingPayload(...).
*/
void clearAdvertisingPayload(void) {
gap().clearAdvertisingPayload();
}
/**
- * This API is *deprecated* and resolves to a no-operation. It is left here
- * to allow older code to compile. Please avoid using this API in new code.
- * This API will be dropped in a future release.
+ * Dynamically reset the accumulated advertising
+ * payload and scanResponse. The application must clear and re-
+ * accumulates a new advertising payload (and scanResponse) before using this
+ * API.
*
- * Formerly, it would be used to dynamically reset the accumulated advertising
- * payload and scanResponse; to do this, the application would clear and re-
- * accumulate a new advertising payload (and scanResponse) before using this
- * API. Updates to the underlying advertisement payload now happen
+ * @return BLE_ERROR_NONE when the advertising payload is set successfully.
+ *
+ * @deprecated You should use the parallel API from Gap directly.
+ *
+ * @note The new APIs in Gap update the underlying advertisement payload
* implicitly.
*/
ble_error_t setAdvertisingPayload(void) {
@@ -557,10 +542,9 @@
* @param[in] data Data bytes.
* @param[in] len Data length.
*
- * @note This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from Gap directly. A former call to
- * ble.accumulateScanResponse(...) should be replaced with
- * ble.gap().accumulateScanResponse(...).
+ * @deprecated You should use the parallel API from Gap directly. A former call to
+ * ble.accumulateScanResponse(...) should be replaced with
+ * ble.gap().accumulateScanResponse(...).
*/
ble_error_t accumulateScanResponse(GapAdvertisingData::DataType type, const uint8_t *data, uint8_t len) {
return gap().accumulateScanResponse(type, data, len);
@@ -570,10 +554,9 @@
* Reset any scan response prepared from prior calls to
* accumulateScanResponse().
*
- * @note This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from Gap directly. A former call to
- * ble.clearScanResponse(...) should be replaced with
- * ble.gap().clearScanResponse(...).
+ * @deprecated You should use the parallel API from Gap directly. A former call to
+ * ble.clearScanResponse(...) should be replaced with
+ * ble.gap().clearScanResponse(...).
*/
void clearScanResponse(void) {
gap().clearScanResponse();
@@ -582,10 +565,9 @@
/**
* Start advertising.
*
- * @note This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from Gap directly. A former call to
- * ble.startAdvertising(...) should be replaced with
- * ble.gap().startAdvertising(...).
+ * @deprecated You should use the parallel API from Gap directly. A former call to
+ * ble.startAdvertising(...) should be replaced with
+ * ble.gap().startAdvertising(...).
*/
ble_error_t startAdvertising(void) {
return gap().startAdvertising();
@@ -594,10 +576,9 @@
/**
* Stop advertising.
*
- * @note This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from Gap directly. A former call to
- * ble.stopAdvertising(...) should be replaced with
- * ble.gap().stopAdvertising(...).
+ * @deprecated You should use the parallel API from Gap directly. A former call to
+ * ble.stopAdvertising(...) should be replaced with
+ * ble.gap().stopAdvertising(...).
*/
ble_error_t stopAdvertising(void) {
return gap().stopAdvertising();
@@ -627,10 +608,9 @@
*
* @note The scan interval and window are recommendations to the BLE stack.
*
- * @note This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from Gap directly. A former call to
- * ble.setScanParams(...) should be replaced with
- * ble.gap().setScanParams(...).
+ * @deprecated You should use the parallel API from Gap directly. A former call to
+ * ble.setScanParams(...) should be replaced with
+ * ble.gap().setScanParams(...).
*/
ble_error_t setScanParams(uint16_t interval = GapScanningParams::SCAN_INTERVAL_MAX,
uint16_t window = GapScanningParams::SCAN_WINDOW_MAX,
@@ -654,10 +634,9 @@
* Once the scanning parameters have been configured, scanning can be
* enabled by using startScan().
*
- * @note This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from Gap directly. A former call to
- * ble.setScanInterval(interval) should be replaced with
- * ble.gap().setScanInterval(interval).
+ * @deprecated You should use the parallel API from Gap directly. A former call to
+ * ble.setScanInterval(interval) should be replaced with
+ * ble.gap().setScanInterval(interval).
*/
ble_error_t setScanInterval(uint16_t interval) {
return gap().setScanInterval(interval);
@@ -678,10 +657,9 @@
* Once the scanning parameters have been configured, scanning can be
* enabled by using startScan().
*
- * @note This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from Gap directly. A former call to
- * ble.setScanWindow(window) should be replaced with
- * ble.gap().setScanWindow(window).
+ * @deprecated You should use the parallel API from Gap directly. A former call to
+ * ble.setScanWindow(window) should be replaced with
+ * ble.gap().setScanWindow(window).
*/
ble_error_t setScanWindow(uint16_t window) {
return gap().setScanWindow(window);
@@ -704,10 +682,9 @@
*
* @note The scan interval and window are recommendations to the BLE stack.
*
- * @note This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from Gap directly. A former call to
- * ble.setScanTimeout(...) should be replaced with
- * ble.gap().setScanTimeout(...).
+ * @deprecated You should use the parallel API from Gap directly. A former call to
+ * ble.setScanTimeout(...) should be replaced with
+ * ble.gap().setScanTimeout(...).
*/
ble_error_t setScanTimeout(uint16_t timeout) {
return gap().setScanTimeout(timeout);
@@ -722,10 +699,9 @@
* Once the scanning parameters have been configured, scanning can be
* enabled by using startScan().
*
- * @note This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from Gap directly. A former call to
- * ble.setActiveScan(...) should be replaced with
- * ble.gap().setActiveScanning(...).
+ * @deprecated You should use the parallel API from Gap directly. A former call to
+ * ble.setActiveScan(...) should be replaced with
+ * ble.gap().setActiveScanning(...).
*/
void setActiveScan(bool activeScanning) {
gap().setActiveScanning(activeScanning);
@@ -740,10 +716,9 @@
* receiving every advertisement report. This can be passed in
* as NULL, in which case scanning may not be enabled at all.
*
- * @note This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from Gap directly. A former call to
- * ble.startScan(callback) should be replaced with
- * ble.gap().startScan(callback).
+ * @deprecated You should use the parallel API from Gap directly. A former call to
+ * ble.startScan(callback) should be replaced with
+ * ble.gap().startScan(callback).
*/
ble_error_t startScan(void (*callback)(const Gap::AdvertisementCallbackParams_t *params)) {
return gap().startScan(callback);
@@ -752,10 +727,9 @@
/**
* Same as above, but this takes an (object, method) pair for a callback.
*
- * @note This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from Gap directly. A former call to
- * ble.startScan(callback) should be replaced with
- * ble.gap().startScan(object, callback).
+ * @deprecated You should use the parallel API from Gap directly. A former call to
+ * ble.startScan(callback) should be replaced with
+ * ble.gap().startScan(object, callback).
*/
template<typename T>
ble_error_t startScan(T *object, void (T::*memberCallback)(const Gap::AdvertisementCallbackParams_t *params));
@@ -765,10 +739,9 @@
*
* @retval BLE_ERROR_NONE if successfully stopped scanning procedure.
*
- * @note This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from Gap directly. A former call to
- * ble.stopScan() should be replaced with
- * ble.gap().stopScan().
+ * @deprecated You should use the parallel API from Gap directly. A former call to
+ * ble.stopScan() should be replaced with
+ * ble.gap().stopScan().
*/
ble_error_t stopScan(void) {
return gap().stopScan();
@@ -788,10 +761,9 @@
* successfully. The onConnection callback (if set) is invoked upon
* a connection event.
*
- * @note This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from Gap directly. A former call to
- * ble.connect(...) should be replaced with
- * ble.gap().connect(...).
+ * @deprecated You should use the parallel API from Gap directly. A former call to
+ * ble.connect(...) should be replaced with
+ * ble.gap().connect(...).
*/
ble_error_t connect(const BLEProtocol::AddressBytes_t peerAddr,
BLEProtocol::AddressType_t peerAddrType = BLEProtocol::AddressType::RANDOM_STATIC,
@@ -821,15 +793,15 @@
* @param reason
* The reason for disconnection; sent back to the peer.
*
- * @note This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from Gap directly. A former call to
- * ble.disconnect(reason) should be replaced with
- * ble.gap().disconnect(reason).
+ * @deprecated You should use the parallel API from Gap directly. A former call to
+ * ble.disconnect(reason) should be replaced with
+ * ble.gap().disconnect(reason).
*
* @note This version of disconnect() doesn't take a connection handle. It
* works reliably only for stacks that are limited to a single
- * connection. This API should be considered *deprecated* in favour of the
- * alternative, which takes a connection handle. It will be dropped in the future.
+ * connection.
+ *
+ * @deprecated You should use the parallel API from Gap directly.
*/
ble_error_t disconnect(Gap::DisconnectionReason_t reason) {
return gap().disconnect(reason);
@@ -839,10 +811,9 @@
* Returns the current Gap state of the device using a bitmask that
* describes whether the device is advertising or connected.
*
- * @note This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from Gap directly. A former call to
- * ble.getGapState() should be replaced with
- * ble.gap().getState().
+ * @deprecated You should use the parallel API from Gap directly. A former call to
+ * ble.getGapState() should be replaced with
+ * ble.gap().getState().
*/
Gap::GapState_t getGapState(void) const {
return gap().getState();
@@ -860,10 +831,9 @@
* @return BLE_ERROR_NONE if the parameters were successfully filled into
* the given structure pointed to by params.
*
- * @note This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from Gap directly. A former call to
- * ble.getPreferredConnectionParams() should be replaced with
- * ble.gap().getPreferredConnectionParams().
+ * @deprecated You should use the parallel API from Gap directly. A former call to
+ * ble.getPreferredConnectionParams() should be replaced with
+ * ble.gap().getPreferredConnectionParams().
*/
ble_error_t getPreferredConnectionParams(Gap::ConnectionParams_t *params) {
return gap().getPreferredConnectionParams(params);
@@ -877,10 +847,9 @@
* @param[in] params
* The structure containing the desired parameters.
*
- * @note This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from Gap directly. A former call to
- * ble.setPreferredConnectionParams() should be replaced with
- * ble.gap().setPreferredConnectionParams().
+ * @deprecated You should use the parallel API from Gap directly. A former call to
+ * ble.setPreferredConnectionParams() should be replaced with
+ * ble.gap().setPreferredConnectionParams().
*/
ble_error_t setPreferredConnectionParams(const Gap::ConnectionParams_t *params) {
return gap().setPreferredConnectionParams(params);
@@ -896,10 +865,9 @@
* Pointer to desired connection parameters. If NULL is provided on a peripheral role,
* the parameters in the PPCP characteristic of the GAP service will be used instead.
*
- * @note This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from Gap directly. A former call to
- * ble.updateConnectionParams() should be replaced with
- * ble.gap().updateConnectionParams().
+ * @deprecated You should use the parallel API from Gap directly. A former call to
+ * ble.updateConnectionParams() should be replaced with
+ * ble.gap().updateConnectionParams().
*/
ble_error_t updateConnectionParams(Gap::Handle_t handle, const Gap::ConnectionParams_t *params) {
return gap().updateConnectionParams(handle, params);
@@ -910,10 +878,9 @@
* @param[in] deviceName
* The new value for the device-name. This is a UTF-8 encoded, <b>NULL-terminated</b> string.
*
- * @note This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from Gap directly. A former call to
- * ble.setDeviceName() should be replaced with
- * ble.gap().setDeviceName().
+ * @deprecated You should use the parallel API from Gap directly. A former call to
+ * ble.setDeviceName() should be replaced with
+ * ble.gap().setDeviceName().
*/
ble_error_t setDeviceName(const uint8_t *deviceName) {
return gap().setDeviceName(deviceName);
@@ -937,10 +904,9 @@
* number of bytes actually returned in deviceName. The application may
* use this information to retry with a suitable buffer size.
*
- * @note This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from Gap directly. A former call to
- * ble.getDeviceName() should be replaced with
- * ble.gap().getDeviceName().
+ * @deprecated You should use the parallel API from Gap directly. A former call to
+ * ble.getDeviceName() should be replaced with
+ * ble.gap().getDeviceName().
*/
ble_error_t getDeviceName(uint8_t *deviceName, unsigned *lengthP) {
return gap().getDeviceName(deviceName, lengthP);
@@ -951,10 +917,9 @@
* @param[in] appearance
* The new value for the device-appearance.
*
- * @note This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from Gap directly. A former call to
- * ble.setAppearance() should be replaced with
- * ble.gap().setAppearance().
+ * @deprecated You should use the parallel API from Gap directly. A former call to
+ * ble.setAppearance() should be replaced with
+ * ble.gap().setAppearance().
*/
ble_error_t setAppearance(GapAdvertisingData::Appearance appearance) {
return gap().setAppearance(appearance);
@@ -965,10 +930,9 @@
* @param[out] appearanceP
* The new value for the device-appearance.
*
- * @note This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from Gap directly. A former call to
- * ble.getAppearance() should be replaced with
- * ble.gap().getAppearance().
+ * @deprecated You should use the parallel API from Gap directly. A former call to
+ * ble.getAppearance() should be replaced with
+ * ble.gap().getAppearance().
*/
ble_error_t getAppearance(GapAdvertisingData::Appearance *appearanceP) {
return gap().getAppearance(appearanceP);
@@ -978,10 +942,9 @@
* Set the radio's transmit power.
* @param[in] txPower Radio transmit power in dBm.
*
- * @note This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from Gap directly. A former call to
- * ble.setTxPower() should be replaced with
- * ble.gap().setTxPower().
+ * @deprecated You should use the parallel API from Gap directly. A former call to
+ * ble.setTxPower() should be replaced with
+ * ble.gap().setTxPower().
*/
ble_error_t setTxPower(int8_t txPower) {
return gap().setTxPower(txPower);
@@ -995,10 +958,9 @@
* @param[out] countP
* Out parameter to receive the array's size.
*
- * @note This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from Gap directly. A former call to
- * ble.getPermittedTxPowerValues() should be replaced with
- * ble.gap().getPermittedTxPowerValues().
+ * @deprecated You should use the parallel API from Gap directly. A former call to
+ * ble.getPermittedTxPowerValues() should be replaced with
+ * ble.gap().getPermittedTxPowerValues().
*/
void getPermittedTxPowerValues(const int8_t **valueArrayPP, size_t *countP) {
gap().getPermittedTxPowerValues(valueArrayPP, countP);
@@ -1008,10 +970,9 @@
* Add a service declaration to the local server ATT table. Also add the
* characteristics contained within.
*
- * @note This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from GattServer directly. A former call
- * to ble.addService() should be replaced with
- * ble.gattServer().addService().
+ * @deprecated You should use the parallel API from GattServer directly. A former call
+ * to ble.addService() should be replaced with
+ * ble.gattServer().addService().
*/
ble_error_t addService(GattService &service) {
return gattServer().addService(service);
@@ -1032,10 +993,9 @@
*
* @return BLE_ERROR_NONE if a value was read successfully into the buffer.
*
- * @note This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from GattServer directly. A former call
- * to ble.readCharacteristicValue() should be replaced with
- * ble.gattServer().read().
+ * @deprecated You should use the parallel API from GattServer directly. A former call
+ * to ble.readCharacteristicValue() should be replaced with
+ * ble.gattServer().read().
*/
ble_error_t readCharacteristicValue(GattAttribute::Handle_t attributeHandle, uint8_t *buffer, uint16_t *lengthP) {
return gattServer().read(attributeHandle, buffer, lengthP);
@@ -1062,10 +1022,9 @@
* parameter to allow fetches for connection-specific multivalued
* attributes (such as the CCCDs).
*
- * @note This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from GattServer directly. A former call
- * to ble.readCharacteristicValue() should be replaced with
- * ble.gattServer().read().
+ * @deprecated You should use the parallel API from GattServer directly. A former call
+ * to ble.readCharacteristicValue() should be replaced with
+ * ble.gattServer().read().
*/
ble_error_t readCharacteristicValue(Gap::Handle_t connectionHandle, GattAttribute::Handle_t attributeHandle, uint8_t *buffer, uint16_t *lengthP) {
return gattServer().read(connectionHandle, attributeHandle, buffer, lengthP);
@@ -1089,10 +1048,9 @@
*
* @return BLE_ERROR_NONE if we have successfully set the value of the attribute.
*
- * @note This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from GattServer directly. A former call
- * to ble.updateCharacteristicValue() should be replaced with
- * ble.gattServer().write().
+ * @deprecated You should use the parallel API from GattServer directly. A former call
+ * to ble.updateCharacteristicValue() should be replaced with
+ * ble.gattServer().write().
*/
ble_error_t updateCharacteristicValue(GattAttribute::Handle_t attributeHandle,
const uint8_t *value,
@@ -1123,10 +1081,9 @@
*
* @return BLE_ERROR_NONE if we have successfully set the value of the attribute.
*
- * @note This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from GattServer directly. A former call
- * to ble.updateCharacteristicValue() should be replaced with
- * ble.gattServer().write().
+ * @deprecated You should use the parallel API from GattServer directly. A former call
+ * to ble.updateCharacteristicValue() should be replaced with
+ * ble.gattServer().write().
*/
ble_error_t updateCharacteristicValue(Gap::Handle_t connectionHandle,
GattAttribute::Handle_t attributeHandle,
@@ -1151,10 +1108,9 @@
*
* @return BLE_ERROR_NONE on success.
*
- * @note This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from SecurityManager directly. A former
- * call to ble.initializeSecurity(...) should be replaced with
- * ble.securityManager().init(...).
+ * @deprecated You should use the parallel API from SecurityManager directly. A former
+ * call to ble.initializeSecurity(...) should be replaced with
+ * ble.securityManager().init(...).
*/
ble_error_t initializeSecurity(bool enableBonding = true,
bool requireMITM = true,
@@ -1171,10 +1127,9 @@
*
* @return BLE_SUCCESS or appropriate error code indicating the reason of failure.
*
- * @note This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from SecurityManager directly. A former
- * call to ble.getLinkSecurity(...) should be replaced with
- * ble.securityManager().getLinkSecurity(...).
+ * @deprecated You should use the parallel API from SecurityManager directly. A former
+ * call to ble.getLinkSecurity(...) should be replaced with
+ * ble.securityManager().getLinkSecurity(...).
*/
ble_error_t getLinkSecurity(Gap::Handle_t connectionHandle, SecurityManager::LinkSecurityStatus_t *securityStatusP) {
return securityManager().getLinkSecurity(connectionHandle, securityStatusP);
@@ -1188,10 +1143,9 @@
* @retval BLE_ERROR_INVALID_STATE If the API is called without module initialization or
* application registration.
*
- * @note This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from SecurityManager directly. A former
- * call to ble.purgeAllBondingState() should be replaced with
- * ble.securityManager().purgeAllBondingState().
+ * @deprecated You should use the parallel API from SecurityManager directly. A former
+ * call to ble.purgeAllBondingState() should be replaced with
+ * ble.securityManager().purgeAllBondingState().
*/
ble_error_t purgeAllBondingState(void) {
return securityManager().purgeAllBondingState();
@@ -1201,10 +1155,9 @@
* Set up a callback for timeout events. Refer to Gap::TimeoutSource_t for
* possible event types.
*
- * @note This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from Gap directly. A former call
- * to ble.onTimeout(callback) should be replaced with
- * ble.gap().onTimeout(callback).
+ * @deprecated You should use the parallel API from Gap directly. A former call
+ * to ble.onTimeout(callback) should be replaced with
+ * ble.gap().onTimeout(callback).
*/
void onTimeout(Gap::TimeoutEventCallback_t timeoutCallback) {
gap().onTimeout(timeoutCallback);
@@ -1213,10 +1166,9 @@
/**
* Set up a callback for connection events. Refer to Gap::ConnectionEventCallback_t.
*
- * @note This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from Gap directly. A former call
- * to ble.onConnection(callback) should be replaced with
- * ble.gap().onConnection(callback).
+ * @deprecated You should use the parallel API from Gap directly. A former call
+ * to ble.onConnection(callback) should be replaced with
+ * ble.gap().onConnection(callback).
*/
void onConnection(Gap::ConnectionEventCallback_t connectionCallback) {
gap().onConnection(connectionCallback);
@@ -1225,10 +1177,9 @@
/**
* Append to a chain of callbacks to be invoked upon GAP disconnection.
*
- * @note This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from Gap directly. A former call
- * to ble.onDisconnection(callback) should be replaced with
- * ble.gap().onDisconnection(callback).
+ * @deprecated You should use the parallel API from Gap directly. A former call
+ * to ble.onDisconnection(callback) should be replaced with
+ * ble.gap().onDisconnection(callback).
*/
void onDisconnection(Gap::DisconnectionEventCallback_t disconnectionCallback) {
gap().onDisconnection(disconnectionCallback);
@@ -1238,10 +1189,9 @@
* The same as onDisconnection(), but allows an object reference and member function
* to be added to the chain of callbacks.
*
- * @note This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from Gap directly. A former call
- * to ble.onDisconnection(callback) should be replaced with
- * ble.gap().onDisconnection(callback).
+ * @deprecated You should use the parallel API from Gap directly. A former call
+ * to ble.onDisconnection(callback) should be replaced with
+ * ble.gap().onDisconnection(callback).
*/
template<typename T>
void onDisconnection(T *tptr, void (T::*mptr)(const Gap::DisconnectionCallbackParams_t*)) {
@@ -1264,10 +1214,9 @@
* The application handler to be invoked in response to a radio
* ACTIVE/INACTIVE event.
*
- * @note This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from Gap directly. A former call
- * to ble.onRadioNotification(...) should be replaced with
- * ble.gap().onRadioNotification(...).
+ * @deprecated You should use the parallel API from Gap directly. A former call
+ * to ble.onRadioNotification(...) should be replaced with
+ * ble.gap().onRadioNotification(...).
*/
void onRadioNotification(void (*callback)(bool)) {
gap().onRadioNotification(callback);
@@ -1284,10 +1233,9 @@
* @note It is also possible to set up a callback into a member function of
* some object.
*
- * @note This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from GattServer directly. A former call
- * to ble.onDataSent(...) should be replaced with
- * ble.gattServer().onDataSent(...).
+ * @deprecated You should use the parallel API from GattServer directly. A former call
+ * to ble.onDataSent(...) should be replaced with
+ * ble.gattServer().onDataSent(...).
*/
void onDataSent(void (*callback)(unsigned count)) {
gattServer().onDataSent(callback);
@@ -1297,10 +1245,9 @@
* The same as onDataSent(), but allows an object reference and member function
* to be added to the chain of callbacks.
*
- * @note This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from GattServer directly. A former call
- * to ble.onDataSent(...) should be replaced with
- * ble.gattServer().onDataSent(...).
+ * @deprecated You should use the parallel API from GattServer directly. A former call
+ * to ble.onDataSent(...) should be replaced with
+ * ble.gattServer().onDataSent(...).
*/
template <typename T> void onDataSent(T * objPtr, void (T::*memberPtr)(unsigned count)) {
gattServer().onDataSent(objPtr, memberPtr);
@@ -1321,10 +1268,9 @@
* @note It is also possible to set up a callback into a member function of
* some object.
*
- * @note This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from GattServer directly. A former call
- * to ble.onDataWritten(...) should be replaced with
- * ble.gattServer().onDataWritten(...).
+ * @deprecated You should use the parallel API from GattServer directly. A former call
+ * to ble.onDataWritten(...) should be replaced with
+ * ble.gattServer().onDataWritten(...).
*/
void onDataWritten(void (*callback)(const GattWriteCallbackParams *eventDataP)) {
gattServer().onDataWritten(callback);
@@ -1334,10 +1280,9 @@
* The same as onDataWritten(), but allows an object reference and member function
* to be added to the chain of callbacks.
*
- * @note This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from GattServer directly. A former call
- * to ble.onDataWritten(...) should be replaced with
- * ble.gattServer().onDataWritten(...).
+ * @deprecated You should use the parallel API from GattServer directly. A former call
+ * to ble.onDataWritten(...) should be replaced with
+ * ble.gattServer().onDataWritten(...).
*/
template <typename T> void onDataWritten(T * objPtr, void (T::*memberPtr)(const GattWriteCallbackParams *context)) {
gattServer().onDataWritten(objPtr, memberPtr);
@@ -1362,10 +1307,9 @@
* @return BLE_ERROR_NOT_IMPLEMENTED if this functionality isn't available;
* else BLE_ERROR_NONE.
*
- * @note This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from GattServer directly. A former call
- * to ble.onDataRead(...) should be replaced with
- * ble.gattServer().onDataRead(...).
+ * @deprecated You should use the parallel API from GattServer directly. A former call
+ * to ble.onDataRead(...) should be replaced with
+ * ble.gattServer().onDataRead(...).
*/
ble_error_t onDataRead(void (*callback)(const GattReadCallbackParams *eventDataP)) {
return gattServer().onDataRead(callback);
@@ -1375,10 +1319,9 @@
* The same as onDataRead(), but allows an object reference and member function
* to be added to the chain of callbacks.
*
- * @note This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from GattServer directly. A former call
- * to ble.onDataRead(...) should be replaced with
- * ble.gattServer().onDataRead(...).
+ * @deprecated You should use the parallel API from GattServer directly. A former call
+ * to ble.onDataRead(...) should be replaced with
+ * ble.gattServer().onDataRead(...).
*/
template <typename T> ble_error_t onDataRead(T * objPtr, void (T::*memberPtr)(const GattReadCallbackParams *context)) {
return gattServer().onDataRead(objPtr, memberPtr);
@@ -1388,10 +1331,9 @@
* Set up a callback for when notifications or indications are enabled for a
* characteristic on the local GattServer.
*
- * @note This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from GattServer directly. A former call
- * to ble.onUpdatesEnabled(callback) should be replaced with
- * ble.gattServer().onUpdatesEnabled(callback).
+ * @deprecated You should use the parallel API from GattServer directly. A former call
+ * to ble.onUpdatesEnabled(callback) should be replaced with
+ * ble.gattServer().onUpdatesEnabled(callback).
*/
void onUpdatesEnabled(GattServer::EventCallback_t callback) {
gattServer().onUpdatesEnabled(callback);
@@ -1401,10 +1343,9 @@
* Set up a callback for when notifications or indications are disabled for a
* characteristic on the local GattServer.
*
- * @note This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from GattServer directly. A former call
- * to ble.onUpdatesEnabled(callback) should be replaced with
- * ble.gattServer().onUpdatesEnabled(callback).
+ * @deprecated You should use the parallel API from GattServer directly. A former call
+ * to ble.onUpdatesEnabled(callback) should be replaced with
+ * ble.gattServer().onUpdatesEnabled(callback).
*/
void onUpdatesDisabled(GattServer::EventCallback_t callback) {
gattServer().onUpdatesDisabled(callback);
@@ -1414,10 +1355,9 @@
* Set up a callback for when the GATT server receives a response for an
* indication event sent previously.
*
- * @note This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from GattServer directly. A former call
- * to ble.onConfirmationReceived(callback) should be replaced with
- * ble.gattServer().onConfirmationReceived(callback).
+ * @deprecated You should use the parallel API from GattServer directly. A former call
+ * to ble.onConfirmationReceived(callback) should be replaced with
+ * ble.gattServer().onConfirmationReceived(callback).
*/
void onConfirmationReceived(GattServer::EventCallback_t callback) {
gattServer().onConfirmationReceived(callback);
@@ -1430,10 +1370,9 @@
* security request: bool allowBonding, bool requireMITM, and
* SecurityIOCapabilities_t.
*
- * @note This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from SecurityManager directly. A former
- * call to ble.onSecuritySetupInitiated(callback) should be replaced with
- * ble.securityManager().onSecuritySetupInitiated(callback).
+ * @deprecated You should use the parallel API from SecurityManager directly. A former
+ * call to ble.onSecuritySetupInitiated(callback) should be replaced with
+ * ble.securityManager().onSecuritySetupInitiated(callback).
*/
void onSecuritySetupInitiated(SecurityManager::SecuritySetupInitiatedCallback_t callback) {
securityManager().onSecuritySetupInitiated(callback);
@@ -1445,10 +1384,9 @@
* devices. The callback is passed in the success/failure status of the
* security setup procedure.
*
- * @note This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from SecurityManager directly. A former
- * call to ble.onSecuritySetupCompleted(callback) should be replaced with
- * ble.securityManager().onSecuritySetupCompleted(callback).
+ * @deprecated You should use the parallel API from SecurityManager directly. A former
+ * call to ble.onSecuritySetupCompleted(callback) should be replaced with
+ * ble.securityManager().onSecuritySetupCompleted(callback).
*/
void onSecuritySetupCompleted(SecurityManager::SecuritySetupCompletedCallback_t callback) {
securityManager().onSecuritySetupCompleted(callback);
@@ -1462,10 +1400,9 @@
* or both sides. The callback is passed in a SecurityManager::SecurityMode_t according
* to the level of security in effect for the secured link.
*
- * @note This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from SecurityManager directly. A former
- * call to ble.onLinkSecured(callback) should be replaced with
- * ble.securityManager().onLinkSecured(callback).
+ * @deprecated You should use the parallel API from SecurityManager directly. A former
+ * call to ble.onLinkSecured(callback) should be replaced with
+ * ble.securityManager().onLinkSecured(callback).
*/
void onLinkSecured(SecurityManager::LinkSecuredCallback_t callback) {
securityManager().onLinkSecured(callback);
@@ -1475,10 +1412,9 @@
* Set up a callback for successful bonding, meaning that link-specific security
* context is stored persistently for a peer device.
*
- * @note This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from SecurityManager directly. A former
- * call to ble.onSecurityContextStored(callback) should be replaced with
- * ble.securityManager().onSecurityContextStored(callback).
+ * @deprecated You should use the parallel API from SecurityManager directly. A former
+ * call to ble.onSecurityContextStored(callback) should be replaced with
+ * ble.securityManager().onSecurityContextStored(callback).
*/
void onSecurityContextStored(SecurityManager::HandleSpecificEvent_t callback) {
securityManager().onSecurityContextStored(callback);
@@ -1491,10 +1427,9 @@
* a passkey (or PIN) to authenticate the connection
* attempt.
*
- * @note This API is now *deprecated* and will be dropped in the future.
- * You should use the parallel API from SecurityManager directly. A former
- * call to ble.onPasskeyDisplay(callback) should be replaced with
- * ble.securityManager().onPasskeyDisplay(callback).
+ * @deprecated You should use the parallel API from SecurityManager directly. A former
+ * call to ble.onPasskeyDisplay(callback) should be replaced with
+ * ble.securityManager().onPasskeyDisplay(callback).
*/
void onPasskeyDisplay(SecurityManager::PasskeyDisplayCallback_t callback) {
return securityManager().onPasskeyDisplay(callback);
@@ -1518,7 +1453,8 @@
BLEInstanceBase *transport; /* The device-specific backend */
};
-typedef BLE BLEDevice; /* DEPRECATED. This type alias is retained for the sake of compatibility with older
+typedef BLE BLEDevice; /**< @deprecated This type alias is retained for the
+ * sake of compatibility with older
* code. Will be dropped at some point soon.*/
#endif // ifndef __BLE_H__
\ No newline at end of file