Marco Ferreira
just a fork
Fork of
BLE_API
by 
Bluetooth Low Energy
Diff: ble/GapAdvertisingData.h
- Revision:
- 1172:4aad76f757e6
- Parent:
- 1135:22aada733dbd
- Child:
- 1179:4ab722f8dca0
--- a/ble/GapAdvertisingData.h Wed Apr 06 19:15:16 2016 +0100
+++ b/ble/GapAdvertisingData.h Wed Apr 06 19:15:18 2016 +0100
@@ -24,125 +24,125 @@
#define GAP_ADVERTISING_DATA_MAX_PAYLOAD (31)
-/**************************************************************************/
-/*!
- \brief
- This class provides several helper functions to generate properly
- formatted GAP Advertising and Scan Response data payloads.
-
- \note
- See Bluetooth Specification 4.0 (Vol. 3), Part C, Sections 11 and 18
- for further information on Advertising and Scan Response data.
-
- \par Advertising and Scan Response Payloads
- Advertising data and Scan Response data are organized around a set of
- data types called 'AD types' in Bluetooth 4.0 (see the Bluetooth Core
- Specification v4.0, Vol. 3, Part C, Sections 11 and 18).
-
- \par
- Each AD type has its own standardized assigned number, as defined
- by the Bluetooth SIG:
- https://www.bluetooth.org/en-us/specification/assigned-numbers/generic-access-profile
-
- \par
- For convenience, all appropriate AD types are encapsulated
- in GapAdvertisingData::DataType.
-
- \par
- Before the AD Types and their payload (if any) can be inserted into
- the Advertising or Scan Response frames, they need to be formatted as
- follows:
-
- \li \c Record length (1 byte).
- \li \c AD Type (1 byte).
- \li \c AD payload (optional; only present if record length > 1).
-
- \par
- This class takes care of properly formatting the payload, performs
- some basic checks on the payload length, and tries to avoid common
- errors like adding an exclusive AD field twice in the Advertising
- or Scan Response payload.
-
- \par EXAMPLE
-
- \code
-
- // ToDo
-
- \endcode
-*/
-/**************************************************************************/
+/**
+ * @brief This class provides several helper functions to generate properly
+ * formatted GAP Advertising and Scan Response data payloads.
+ *
+ * @note See Bluetooth Specification 4.0 (Vol. 3), Part C, Sections 11 and 18
+ * for further information on Advertising and Scan Response data.
+ *
+ * @par Advertising and Scan Response Payloads
+ * Advertising data and Scan Response data are organized around a set of
+ * data types called 'AD types' in Bluetooth 4.0 (see the Bluetooth Core
+ * Specification v4.0, Vol. 3, Part C, Sections 11 and 18).
+ *
+ * @par
+ * Each AD type has its own standardized assigned number, as defined
+ * by the Bluetooth SIG:
+ * https://www.bluetooth.org/en-us/specification/assigned-numbers/generic-access-profile.
+ *
+ * @par
+ * For convenience, all appropriate AD types are encapsulated
+ * in GapAdvertisingData::DataType.
+ *
+ * @par
+ * Before the AD Types and their payload (if any) can be inserted into
+ * the Advertising or Scan Response frames, they need to be formatted as
+ * follows:
+ *
+ * @li @c Record length (1 byte).
+ * @li @c AD Type (1 byte).
+ * @li @c AD payload (optional; only present if record length > 1).
+ *
+ * @par
+ * This class takes care of properly formatting the payload, performs
+ * some basic checks on the payload length, and tries to avoid common
+ * errors like adding an exclusive AD field twice in the Advertising
+ * or Scan Response payload.
+ *
+ * @par EXAMPLE
+ *
+ * @code
+ *
+ * // ToDo
+ *
+ * @endcode
+ */
class GapAdvertisingData
{
public:
- /**********************************************************************/
/*!
- \brief
- A list of Advertising Data types commonly used by peripherals.
- These AD types are used to describe the capabilities of the
- peripheral, and are inserted inside the advertising or scan
- response payloads.
-
- \par Source
- \li \c Bluetooth Core Specification 4.0 (Vol. 3), Part C, Section 11, 18
- \li \c https://www.bluetooth.org/en-us/specification/assigned-numbers/generic-access-profile
- */
- /**********************************************************************/
+ * @brief A list of Advertising Data types commonly used by peripherals.
+ * These AD types are used to describe the capabilities of the
+ * peripheral, and are inserted inside the advertising or scan
+ * response payloads.
+ *
+ * @par Source
+ *
+ * @li @c Bluetooth Core Specification 4.0 (Vol. 3), Part C, Section 11, 18.
+ * @li @c https://www.bluetooth.org/en-us/specification/assigned-numbers/generic-access-profile.
+ */
enum DataType_t {
- FLAGS = 0x01, /**< \ref *Flags */
- INCOMPLETE_LIST_16BIT_SERVICE_IDS = 0x02, /**< Incomplete list of 16-bit Service IDs */
- COMPLETE_LIST_16BIT_SERVICE_IDS = 0x03, /**< Complete list of 16-bit Service IDs */
- INCOMPLETE_LIST_32BIT_SERVICE_IDS = 0x04, /**< Incomplete list of 32-bit Service IDs (not relevant for Bluetooth 4.0) */
- COMPLETE_LIST_32BIT_SERVICE_IDS = 0x05, /**< Complete list of 32-bit Service IDs (not relevant for Bluetooth 4.0) */
- INCOMPLETE_LIST_128BIT_SERVICE_IDS = 0x06, /**< Incomplete list of 128-bit Service IDs */
- COMPLETE_LIST_128BIT_SERVICE_IDS = 0x07, /**< Complete list of 128-bit Service IDs */
- SHORTENED_LOCAL_NAME = 0x08, /**< Shortened Local Name */
- COMPLETE_LOCAL_NAME = 0x09, /**< Complete Local Name */
- TX_POWER_LEVEL = 0x0A, /**< TX Power Level (in dBm) */
- DEVICE_ID = 0x10, /**< Device ID */
- SLAVE_CONNECTION_INTERVAL_RANGE = 0x12, /**< Slave Connection Interval Range */
- LIST_128BIT_SOLICITATION_IDS = 0x15, /**< List of 128 bit service UUIDs the device is looking for */
- SERVICE_DATA = 0x16, /**< Service Data */
- APPEARANCE = 0x19, /**< \ref Appearance */
- ADVERTISING_INTERVAL = 0x1A, /**< Advertising Interval */
- MANUFACTURER_SPECIFIC_DATA = 0xFF /**< Manufacturer Specific Data */
+ FLAGS = 0x01, /**< Flags, refer to GapAdvertisingData::Flags_t. */
+ INCOMPLETE_LIST_16BIT_SERVICE_IDS = 0x02, /**< Incomplete list of 16-bit Service IDs. */
+ COMPLETE_LIST_16BIT_SERVICE_IDS = 0x03, /**< Complete list of 16-bit Service IDs. */
+ INCOMPLETE_LIST_32BIT_SERVICE_IDS = 0x04, /**< Incomplete list of 32-bit Service IDs (not relevant for Bluetooth 4.0). */
+ COMPLETE_LIST_32BIT_SERVICE_IDS = 0x05, /**< Complete list of 32-bit Service IDs (not relevant for Bluetooth 4.0). */
+ INCOMPLETE_LIST_128BIT_SERVICE_IDS = 0x06, /**< Incomplete list of 128-bit Service IDs. */
+ COMPLETE_LIST_128BIT_SERVICE_IDS = 0x07, /**< Complete list of 128-bit Service IDs. */
+ SHORTENED_LOCAL_NAME = 0x08, /**< Shortened Local Name. */
+ COMPLETE_LOCAL_NAME = 0x09, /**< Complete Local Name. */
+ TX_POWER_LEVEL = 0x0A, /**< TX Power Level (in dBm). */
+ DEVICE_ID = 0x10, /**< Device ID. */
+ SLAVE_CONNECTION_INTERVAL_RANGE = 0x12, /**< Slave Connection Interval Range. */
+ LIST_128BIT_SOLICITATION_IDS = 0x15, /**< List of 128 bit service UUIDs the device is looking for. */
+ SERVICE_DATA = 0x16, /**< Service Data. */
+ APPEARANCE = 0x19, /**< Appearance, refer to GapAdvertisingData::Appearance_t. */
+ ADVERTISING_INTERVAL = 0x1A, /**< Advertising Interval. */
+ MANUFACTURER_SPECIFIC_DATA = 0xFF /**< Manufacturer Specific Data. */
};
- typedef enum DataType_t DataType; /* Deprecated type alias. This may be dropped in a future release. */
-
- /**********************************************************************/
- /*!
- \brief
- A list of values for the FLAGS AD Type.
+ /**
+ * Type alias for GapAdvertisingData::DataType_t.
+ *
+ * @deprecated This type alias will be dropped in future releases.
+ */
+ typedef enum DataType_t DataType;
- \note
- You can use more than one value in the FLAGS AD Type (ex.
- LE_GENERAL_DISCOVERABLE and BREDR_NOT_SUPPORTED).
-
- \par Source
- \li \c Bluetooth Core Specification 4.0 (Vol. 3), Part C, Section 18.1
- */
- /**********************************************************************/
+ /**
+ * @brief A list of values for the FLAGS AD Type.
+ *
+ * @note You can use more than one value in the FLAGS AD Type (ex.
+ * LE_GENERAL_DISCOVERABLE and BREDR_NOT_SUPPORTED).
+ *
+ * @par Source
+ *
+ * @li @c Bluetooth Core Specification 4.0 (Vol. 3), Part C, Section 18.1.
+ */
enum Flags_t {
- LE_LIMITED_DISCOVERABLE = 0x01, /**< *Peripheral device is discoverable for a limited period of time. */
+ LE_LIMITED_DISCOVERABLE = 0x01, /**< Peripheral device is discoverable for a limited period of time. */
LE_GENERAL_DISCOVERABLE = 0x02, /**< Peripheral device is discoverable at any moment. */
BREDR_NOT_SUPPORTED = 0x04, /**< Peripheral device is LE only. */
SIMULTANEOUS_LE_BREDR_C = 0x08, /**< Not relevant - central mode only. */
SIMULTANEOUS_LE_BREDR_H = 0x10 /**< Not relevant - central mode only. */
};
- typedef enum Flags_t Flags; /* Deprecated type alias. This may be dropped in a future release. */
+ /**
+ * Type alias for GapAdvertisingData::Flags_t.
+ *
+ * @deprecated This type alias will be dropped in future releases.
+ */
+ typedef enum Flags_t Flags;
- /**********************************************************************/
- /*!
- \brief
- A list of values for the APPEARANCE AD Type, which describes the
- physical shape or appearance of the device.
-
- \par Source
- \li \c Bluetooth Core Specification Supplement, Part A, Section 1.12
- \li \c Bluetooth Core Specification 4.0 (Vol. 3), Part C, Section 12.2
- \li \c https://developer.bluetooth.org/gatt/characteristics/Pages/CharacteristicViewer.aspx?u=org.bluetooth.characteristic.gap.appearance.xml
- */
- /**********************************************************************/
+ /**
+ * @brief
+ * A list of values for the APPEARANCE AD Type, which describes the
+ * physical shape or appearance of the device.
+ *
+ * @par Source
+ *
+ * @li @c Bluetooth Core Specification Supplement, Part A, Section 1.12.
+ * @li @c Bluetooth Core Specification 4.0 (Vol. 3), Part C, Section 12.2.
+ * @li @c https://developer.bluetooth.org/gatt/characteristics/Pages/CharacteristicViewer.aspx?u=org.bluetooth.characteristic.gap.appearance.xml.
+ */
enum Appearance_t {
UNKNOWN = 0, /**< Unknown or unspecified appearance type. */
GENERIC_PHONE = 64, /**< Generic Phone. */
@@ -194,14 +194,22 @@
OUTDOOR_LOCATION_POD = 5187, /**< Outdoor Location Pod. */
OUTDOOR_LOCATION_AND_NAVIGATION_POD = 5188 /**< Outdoor Location and Navigation Pod. */
};
- typedef enum Appearance_t Appearance; /* Deprecated type alias. This may be dropped in a future release. */
+ /**
+ * Type alias for GapAdvertisingData::Appearance_t.
+ *
+ * @deprecated This type alias will be dropped in future releases.
+ */
+ typedef enum Appearance_t Appearance;
+ /**
+ * Empty constructor.
+ */
GapAdvertisingData(void) : _payload(), _payloadLen(0), _appearance(GENERIC_TAG) {
/* empty */
}
/**
- * Adds advertising data based on the specified AD type (see DataType).
+ * Adds advertising data based on the specified AD type (see GapAdvertisingData::DataType_t).
* If the supplied AD type is already present in the advertising
* payload, then the value is updated.
*
@@ -222,14 +230,14 @@
*/
ble_error_t addData(DataType_t advDataType, const uint8_t *payload, uint8_t len)
{
- // find field
+ /* Find field */
uint8_t* field = findField(advDataType);
if (field) {
- // Field type already exist, either add to field or replace
+ /* Field type already exist, either add to field or replace */
return addField(advDataType, payload, len, field);
} else {
- // field doesn't exists, insert new
+ /* Field doesn't exists, insert new */
return appendField(advDataType, payload, len);
}
}
@@ -249,14 +257,14 @@
*/
ble_error_t updateData(DataType_t advDataType, const uint8_t *payload, uint8_t len)
{
- // find field
+ /* Find field */
uint8_t* field = findField(advDataType);
if (field) {
- // Field type already exist, replace field contents
+ /* Field type already exist, replace field contents */
return updateField(advDataType, payload, len, field);
} else {
- // field doesn't exists, return an error
+ /* field doesn't exists, return an error */
return BLE_ERROR_UNSPECIFIED;
}
}
@@ -268,7 +276,7 @@
* The APPEARANCE value to add.
*
* @return BLE_ERROR_BUFFER_OVERFLOW if the specified data would cause the
- * advertising buffer to overflow, else BLE_ERROR_NONE.
+ * advertising buffer to overflow, else BLE_ERROR_NONE.
*/
ble_error_t addAppearance(Appearance appearance = GENERIC_TAG) {
_appearance = appearance;
@@ -277,16 +285,17 @@
/**
* Helper function to add FLAGS data to the advertising payload.
- * @param flags
- * LE_LIMITED_DISCOVERABLE
- * The peripheral is discoverable for a limited period of time.
- * LE_GENERAL_DISCOVERABLE
- * The peripheral is permanently discoverable.
- * BREDR_NOT_SUPPORTED
- * This peripheral is a Bluetooth Low Energy only device (no EDR support).
+ *
+ * @param[in] flags
+ * LE_LIMITED_DISCOVERABLE
+ * The peripheral is discoverable for a limited period of time.
+ * LE_GENERAL_DISCOVERABLE
+ * The peripheral is permanently discoverable.
+ * BREDR_NOT_SUPPORTED
+ * This peripheral is a Bluetooth Low Energy only device (no EDR support).
*
* @return BLE_ERROR_BUFFER_OVERFLOW if the specified data would cause the
- * advertising buffer to overflow, else BLE_ERROR_NONE.
+ * advertising buffer to overflow, else BLE_ERROR_NONE.
*/
ble_error_t addFlags(uint8_t flags = LE_GENERAL_DISCOVERABLE) {
return addData(GapAdvertisingData::FLAGS, &flags, 1);
@@ -296,7 +305,7 @@
* Helper function to add TX_POWER_LEVEL data to the advertising payload.
*
* @return BLE_ERROR_BUFFER_OVERFLOW if the specified data would cause the
- * advertising buffer to overflow, else BLE_ERROR_NONE.
+ * advertising buffer to overflow, else BLE_ERROR_NONE.
*/
ble_error_t addTxPower(int8_t txPower) {
/* To Do: Basic error checking to make sure txPower is in range. */
@@ -312,30 +321,40 @@
}
/**
- * Returns a pointer to the current payload.
+ * Access the current payload.
+ *
+ * @return A pointer to the current payload.
*/
const uint8_t *getPayload(void) const {
return _payload;
}
/**
- * Returns the current payload length (0..31 bytes).
+ * Get the current payload length.
+ *
+ * @return The current payload length (0..31 bytes).
*/
uint8_t getPayloadLen(void) const {
return _payloadLen;
}
/**
- * Returns the 16-bit appearance value for this device.
+ * Get the current appearance value.
+ *
+ * @return The 16-bit appearance value for this device.
*/
uint16_t getAppearance(void) const {
return (uint16_t)_appearance;
}
/**
- * Search advertisement data for field.
- * Returns pointer to the first element in the field if found, NULL otherwise.
- * Where the first element is the length of the field.
+ * Search advertisement data for a specific field.
+ *
+ * @param[in] type
+ * The type of the field to find.
+ *
+ * @return A pointer to the first element in the field if found, NULL otherwise.
+ * Where the first element is the length of the field.
*/
const uint8_t* findField(DataType_t type) const {
return findField(type);
@@ -343,7 +362,19 @@
private:
/**
- * Append advertising data based on the specified AD type (see DataType)
+ * Append advertising data based on the specified AD type (see
+ * GapAdvertisingData::DataType_t).
+ *
+ * @param[in] advDataType
+ * The type of the new data.
+ * @param[in] payload
+ * A pointer to the data to be appended to the advertising
+ * payload.
+ * @param[in] len
+ * The length of th data pointed to by @p payload.
+ *
+ * @return BLE_ERROR_BUFFER_OVERFLOW if the specified data would cause the
+ * advertising buffer to overflow, else BLE_ERROR_NONE.
*/
ble_error_t appendField(DataType advDataType, const uint8_t *payload, uint8_t len)
{
@@ -369,11 +400,15 @@
/**
* Search advertisement data for field.
- * Returns pointer to the first element in the field if found, NULL otherwise.
- * Where the first element is the length of the field.
+ *
+ * @param[in] type
+ * The type of the data to find.
+ *
+ * @return A pointer to the first element in the field if found, NULL
+ * otherwise. Where the first element is the length of the field.
*/
uint8_t* findField(DataType_t type) {
- // scan through advertisement data
+ /* Scan through advertisement data */
for (uint8_t idx = 0; idx < _payloadLen; ) {
uint8_t fieldType = _payload[idx + 1];
@@ -381,11 +416,11 @@
return &_payload[idx];
}
- // advance to next field
+ /* Advance to next field */
idx += _payload[idx] + 1;
}
- // field not found
+ /* Field not found */
return NULL;
}
@@ -393,6 +428,17 @@
* Given the a pointer to a field in the advertising payload it replaces
* the existing data in the field with the supplied data.
*
+ * @param[in] advDataType
+ * The type of the new data.
+ * @param[in] payload
+ * A pointer to the data to be added to the advertising
+ * payload.
+ * @param[in] len
+ * The length of th data pointed to by @p payload.
+ * @param[in] field
+ * A pointer to the field of type @p advDataType in the
+ * advertising buffer.
+ *
* When the specified AD type is INCOMPLETE_LIST_16BIT_SERVICE_IDS,
* COMPLETE_LIST_16BIT_SERVICE_IDS, INCOMPLETE_LIST_32BIT_SERVICE_IDS,
* COMPLETE_LIST_32BIT_SERVICE_IDS, INCOMPLETE_LIST_128BIT_SERVICE_IDS,
@@ -400,14 +446,14 @@
* supplied value is appended to the values previously added to the
* payload.
*
- * Returns BLE_ERROR_NONE on success.
+ * @return BLE_ERROR_NONE on success.
*/
ble_error_t addField(DataType_t advDataType, const uint8_t *payload, uint8_t len, uint8_t* field)
{
ble_error_t result = BLE_ERROR_BUFFER_OVERFLOW;
switch(advDataType) {
- // These fields will have the new data appended if there is sufficient space
+ /* These fields will have the new data appended if there is sufficient space */
case INCOMPLETE_LIST_16BIT_SERVICE_IDS:
case COMPLETE_LIST_16BIT_SERVICE_IDS:
case INCOMPLETE_LIST_32BIT_SERVICE_IDS:
@@ -415,11 +461,13 @@
case INCOMPLETE_LIST_128BIT_SERVICE_IDS:
case COMPLETE_LIST_128BIT_SERVICE_IDS:
case LIST_128BIT_SOLICITATION_IDS: {
- // check if data fits
+ /* Check if data fits */
if ((_payloadLen + len) <= GAP_ADVERTISING_DATA_MAX_PAYLOAD) {
- // make room for new field by moving the remainder of the
- // advertisement payload "to the right" starting after the
- // TYPE field.
+ /*
+ * Make room for new field by moving the remainder of the
+ * advertisement payload "to the right" starting after the
+ * TYPE field.
+ */
uint8_t* end = &_payload[_payloadLen];
while (&field[1] < end) {
@@ -427,12 +475,12 @@
end--;
}
- // insert new data
+ /* Insert new data */
for (uint8_t idx = 0; idx < len; idx++) {
field[2 + idx] = payload[idx];
}
- // increment lengths
+ /* Increment lengths */
field[0] += len;
_payloadLen += len;
@@ -441,7 +489,7 @@
break;
}
- // These fields will be overwritten with the new value
+ /* These fields will be overwritten with the new value */
default: {
result = updateField(advDataType, payload, len, field);
@@ -455,14 +503,26 @@
/**
* Given the a pointer to a field in the advertising payload it replaces
* the existing data in the field with the supplied data.
- * Returns BLE_ERROR_NONE on success.
+ *
+ * @param[in] advDataType
+ * The type of the data to be updated.
+ * @param[in] payload
+ * A pointer to the data to be updated to the advertising
+ * payload.
+ * @param[in] len
+ * The length of th data pointed to by @p payload.
+ * @param[in] field
+ * A pointer to the field of type @p advDataType in the
+ * advertising buffer.
+ *
+ * @return BLE_ERROR_NONE on success.
*/
ble_error_t updateField(DataType_t advDataType, const uint8_t *payload, uint8_t len, uint8_t* field)
{
ble_error_t result = BLE_ERROR_BUFFER_OVERFLOW;
uint8_t dataLength = field[0] - 1;
- // new data has same length, do in-order replacement
+ /* New data has same length, do in-order replacement */
if (len == dataLength) {
for (uint8_t idx = 0; idx < dataLength; idx++) {
field[2 + idx] = payload[idx];
@@ -470,19 +530,19 @@
result = BLE_ERROR_NONE;
} else {
- // check if data fits
+ /* Check if data fits */
if ((_payloadLen - dataLength + len) <= GAP_ADVERTISING_DATA_MAX_PAYLOAD) {
- // remove old field
+ /* Remove old field */
while ((field + dataLength + 2) < &_payload[_payloadLen]) {
*field = field[dataLength + 2];
field++;
}
- // reduce length
+ /* Reduce length */
_payloadLen -= dataLength + 2;
- // add new field
+ /* Add new field */
result = appendField(advDataType, payload, len);
}
}
@@ -490,9 +550,18 @@
return result;
}
+ /**
+ * The advertising data buffer
+ */
uint8_t _payload[GAP_ADVERTISING_DATA_MAX_PAYLOAD];
+ /**
+ * The length of the data added to the advertising buffer.
+ */
uint8_t _payloadLen;
+ /**
+ * Appearance value.
+ */
uint16_t _appearance;
};
-#endif // ifndef __GAP_ADVERTISING_DATA_H__
\ No newline at end of file
+#endif /* ifndef __GAP_ADVERTISING_DATA_H__ */
\ No newline at end of file