Marco Ferreira / BLE_API

just a fork

Fork of BLE_API by Bluetooth Low Energy

ble/Gap.h@1107:93b0b9304c53, 2016-01-11 (annotated)

Committer:
vcoubard
Date:
Mon Jan 11 08:51:57 2016 +0000
Revision:
1107:93b0b9304c53
Parent:
1104:0244fbb0324e
Child:
1108:ce7f6dbab398
Synchronized with git rev 7398a396

Author: Liyou Zhou

Hotfix for backward compatibility



for change from Gap:AddressType_t to BLEProtocol::AddressType_t

Who changed what in which revision?

UserRevisionLine numberNew contents of line
rgrover1 710:b2e1a2660ec2 1 /* mbed Microcontroller Library
rgrover1 710:b2e1a2660ec2 2 * Copyright (c) 2006-2013 ARM Limited
rgrover1 710:b2e1a2660ec2 3 *
rgrover1 710:b2e1a2660ec2 4 * Licensed under the Apache License, Version 2.0 (the "License");
rgrover1 710:b2e1a2660ec2 5 * you may not use this file except in compliance with the License.
rgrover1 710:b2e1a2660ec2 6 * You may obtain a copy of the License at
rgrover1 710:b2e1a2660ec2 7 *
rgrover1 710:b2e1a2660ec2 8 * http://www.apache.org/licenses/LICENSE-2.0
rgrover1 710:b2e1a2660ec2 9 *
rgrover1 710:b2e1a2660ec2 10 * Unless required by applicable law or agreed to in writing, software
rgrover1 710:b2e1a2660ec2 11 * distributed under the License is distributed on an "AS IS" BASIS,
rgrover1 710:b2e1a2660ec2 12 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
rgrover1 710:b2e1a2660ec2 13 * See the License for the specific language governing permissions and
rgrover1 710:b2e1a2660ec2 14 * limitations under the License.
rgrover1 710:b2e1a2660ec2 15 */
rgrover1 710:b2e1a2660ec2 16
rgrover1 710:b2e1a2660ec2 17 #ifndef __GAP_H__
rgrover1 710:b2e1a2660ec2 18 #define __GAP_H__
rgrover1 710:b2e1a2660ec2 19
vcoubard 1078:79c089630b38 20 #include "ble/BLEProtocol.h"
rgrover1 710:b2e1a2660ec2 21 #include "GapAdvertisingData.h"
rgrover1 710:b2e1a2660ec2 22 #include "GapAdvertisingParams.h"
rgrover1 710:b2e1a2660ec2 23 #include "GapScanningParams.h"
rgrover1 710:b2e1a2660ec2 24 #include "GapEvents.h"
rgrover1 829:9072de50087b 25 #include "CallChainOfFunctionPointersWithContext.h"
rgrover1 710:b2e1a2660ec2 26 #include "FunctionPointerWithContext.h"
rgrover1 710:b2e1a2660ec2 27
vcoubard 1048:efb29faf12fc 28 /* Forward declarations for classes that will only be used for pointers or references in the following. */
rgrover1 710:b2e1a2660ec2 29 class GapAdvertisingParams;
rgrover1 710:b2e1a2660ec2 30 class GapScanningParams;
rgrover1 710:b2e1a2660ec2 31 class GapAdvertisingData;
rgrover1 710:b2e1a2660ec2 32
rgrover1 710:b2e1a2660ec2 33 class Gap {
vcoubard 1078:79c089630b38 34 /*
vcoubard 1078:79c089630b38 35 * DEPRECATION ALERT: all of the APIs in this `public` block are deprecated.
vcoubard 1078:79c089630b38 36 * They have been relocated to the class BLEProtocol.
vcoubard 1078:79c089630b38 37 */
rgrover1 710:b2e1a2660ec2 38 public:
vcoubard 1078:79c089630b38 39 /**
vcoubard 1078:79c089630b38 40 * Address-type for BLEProtocol addresses.
vcoubard 1091:58b2dac13261 41 *
vcoubard 1086:75d4e8ce277d 42 * @note: deprecated. Use BLEProtocol::AddressType_t instead.
vcoubard 1078:79c089630b38 43 */
vcoubard 1086:75d4e8ce277d 44 typedef BLEProtocol::AddressType_t AddressType_t;
vcoubard 1086:75d4e8ce277d 45
vcoubard 1086:75d4e8ce277d 46 /**
vcoubard 1086:75d4e8ce277d 47 * Address-type for BLEProtocol addresses.
vcoubard 1086:75d4e8ce277d 48 * @note: deprecated. Use BLEProtocol::AddressType_t instead.
vcoubard 1087:4c6e11878033 49 */
vcoubard 1087:4c6e11878033 50 typedef BLEProtocol::AddressType_t addr_type_t;
vcoubard 1087:4c6e11878033 51
vcoubard 1091:58b2dac13261 52 /**
vcoubard 1091:58b2dac13261 53 * Address-type for BLEProtocol addresses.
vcoubard 1091:58b2dac13261 54 * @note: deprecated. Use BLEProtocol::AddressType_t instead.
vcoubard 1091:58b2dac13261 55 *
vcoubard 1091:58b2dac13261 56 * DEPRECATION ALERT: The following constants have been left in their
vcoubard 1091:58b2dac13261 57 * deprecated state to transparenly support existing applications which may
vcoubard 1091:58b2dac13261 58 * have used Gap::ADDR_TYPE_*.
vcoubard 1091:58b2dac13261 59 */
vcoubard 1107:93b0b9304c53 60 enum AddressTypeOverload_t {
vcoubard 1091:58b2dac13261 61 ADDR_TYPE_PUBLIC = BLEProtocol::AddressType::PUBLIC,
vcoubard 1091:58b2dac13261 62 ADDR_TYPE_RANDOM_STATIC = BLEProtocol::AddressType::RANDOM_STATIC,
vcoubard 1091:58b2dac13261 63 ADDR_TYPE_RANDOM_PRIVATE_RESOLVABLE = BLEProtocol::AddressType::RANDOM_PRIVATE_RESOLVABLE,
vcoubard 1091:58b2dac13261 64 ADDR_TYPE_RANDOM_PRIVATE_NON_RESOLVABLE = BLEProtocol::AddressType::RANDOM_PRIVATE_NON_RESOLVABLE
vcoubard 1091:58b2dac13261 65 };
vcoubard 1091:58b2dac13261 66
vcoubard 1078:79c089630b38 67 static const unsigned ADDR_LEN = BLEProtocol::ADDR_LEN; /**< Length (in octets) of the BLE MAC address. */
vcoubard 1078:79c089630b38 68 typedef BLEProtocol::Address_t Address_t; /**< 48-bit address, LSB format. @Note: Deprecated. Use BLEProtocol::Address_t instead. */
vcoubard 1078:79c089630b38 69 typedef BLEProtocol::Address_t address_t; /**< 48-bit address, LSB format. @Note: Deprecated. Use BLEProtocol::Address_t instead. */
vcoubard 1078:79c089630b38 70
vcoubard 1078:79c089630b38 71 public:
rgrover1 710:b2e1a2660ec2 72 enum TimeoutSource_t {
rgrover1 710:b2e1a2660ec2 73 TIMEOUT_SRC_ADVERTISING = 0x00, /**< Advertising timeout. */
rgrover1 710:b2e1a2660ec2 74 TIMEOUT_SRC_SECURITY_REQUEST = 0x01, /**< Security request timeout. */
rgrover1 710:b2e1a2660ec2 75 TIMEOUT_SRC_SCAN = 0x02, /**< Scanning timeout. */
rgrover1 710:b2e1a2660ec2 76 TIMEOUT_SRC_CONN = 0x03, /**< Connection timeout. */
rgrover1 710:b2e1a2660ec2 77 };
rgrover1 710:b2e1a2660ec2 78
rgrover1 710:b2e1a2660ec2 79 /**
rgrover1 710:b2e1a2660ec2 80 * Enumeration for disconnection reasons. The values for these reasons are
vcoubard 1048:efb29faf12fc 81 * derived from Nordic's implementation, but the reasons are meant to be
vcoubard 1048:efb29faf12fc 82 * independent of the transport. If you are returned a reason that is not
vcoubard 1048:efb29faf12fc 83 * covered by this enumeration, please refer to the underlying
rgrover1 710:b2e1a2660ec2 84 * transport library.
rgrover1 710:b2e1a2660ec2 85 */
rgrover1 710:b2e1a2660ec2 86 enum DisconnectionReason_t {
rgrover1 710:b2e1a2660ec2 87 CONNECTION_TIMEOUT = 0x08,
rgrover1 710:b2e1a2660ec2 88 REMOTE_USER_TERMINATED_CONNECTION = 0x13,
vcoubard 1048:efb29faf12fc 89 REMOTE_DEV_TERMINATION_DUE_TO_LOW_RESOURCES = 0x14, /**< Remote device terminated connection due to low resources.*/
vcoubard 1048:efb29faf12fc 90 REMOTE_DEV_TERMINATION_DUE_TO_POWER_OFF = 0x15, /**< Remote device terminated connection due to power off. */
rgrover1 710:b2e1a2660ec2 91 LOCAL_HOST_TERMINATED_CONNECTION = 0x16,
rgrover1 710:b2e1a2660ec2 92 CONN_INTERVAL_UNACCEPTABLE = 0x3B,
rgrover1 710:b2e1a2660ec2 93 };
rgrover1 710:b2e1a2660ec2 94
vcoubard 1048:efb29faf12fc 95 /* Describes the current state of the device (more than one bit can be set). */
rgrover1 710:b2e1a2660ec2 96 struct GapState_t {
vcoubard 1048:efb29faf12fc 97 unsigned advertising : 1; /**< Peripheral is currently advertising. */
vcoubard 1048:efb29faf12fc 98 unsigned connected : 1; /**< Peripheral is connected to a central. */
rgrover1 710:b2e1a2660ec2 99 };
rgrover1 710:b2e1a2660ec2 100
rgrover1 710:b2e1a2660ec2 101 typedef uint16_t Handle_t; /* Type for connection handle. */
rgrover1 710:b2e1a2660ec2 102
rgrover1 710:b2e1a2660ec2 103 typedef struct {
rgrover1 710:b2e1a2660ec2 104 uint16_t minConnectionInterval; /**< Minimum Connection Interval in 1.25 ms units, see @ref BLE_GAP_CP_LIMITS.*/
rgrover1 710:b2e1a2660ec2 105 uint16_t maxConnectionInterval; /**< Maximum Connection Interval in 1.25 ms units, see @ref BLE_GAP_CP_LIMITS.*/
rgrover1 710:b2e1a2660ec2 106 uint16_t slaveLatency; /**< Slave Latency in number of connection events, see @ref BLE_GAP_CP_LIMITS.*/
rgrover1 710:b2e1a2660ec2 107 uint16_t connectionSupervisionTimeout; /**< Connection Supervision Timeout in 10 ms units, see @ref BLE_GAP_CP_LIMITS.*/
rgrover1 710:b2e1a2660ec2 108 } ConnectionParams_t;
rgrover1 710:b2e1a2660ec2 109
rgrover1 710:b2e1a2660ec2 110 enum Role_t {
rgrover1 710:b2e1a2660ec2 111 PERIPHERAL = 0x1, /**< Peripheral Role. */
rgrover1 710:b2e1a2660ec2 112 CENTRAL = 0x2, /**< Central Role. */
rgrover1 710:b2e1a2660ec2 113 };
rgrover1 710:b2e1a2660ec2 114
rgrover1 710:b2e1a2660ec2 115 struct AdvertisementCallbackParams_t {
vcoubard 1079:6e2d9514f3df 116 BLEProtocol::Address_t peerAddr;
vcoubard 1079:6e2d9514f3df 117 int8_t rssi;
vcoubard 1079:6e2d9514f3df 118 bool isScanResponse;
vcoubard 1079:6e2d9514f3df 119 GapAdvertisingParams::AdvertisingType_t type;
vcoubard 1079:6e2d9514f3df 120 uint8_t advertisingDataLen;
vcoubard 1079:6e2d9514f3df 121 const uint8_t *advertisingData;
rgrover1 710:b2e1a2660ec2 122 };
rgrover1 710:b2e1a2660ec2 123 typedef FunctionPointerWithContext<const AdvertisementCallbackParams_t *> AdvertisementReportCallback_t;
rgrover1 710:b2e1a2660ec2 124
rgrover1 710:b2e1a2660ec2 125 struct ConnectionCallbackParams_t {
vcoubard 1078:79c089630b38 126 Handle_t handle;
vcoubard 1078:79c089630b38 127 Role_t role;
vcoubard 1078:79c089630b38 128 BLEProtocol::AddressType_t peerAddrType;
vcoubard 1079:6e2d9514f3df 129 BLEProtocol::Address_t peerAddr;
vcoubard 1078:79c089630b38 130 BLEProtocol::AddressType_t ownAddrType;
vcoubard 1079:6e2d9514f3df 131 BLEProtocol::Address_t ownAddr;
vcoubard 1078:79c089630b38 132 const ConnectionParams_t *connectionParams;
rgrover1 710:b2e1a2660ec2 133
vcoubard 1078:79c089630b38 134 ConnectionCallbackParams_t(Handle_t handleIn,
vcoubard 1078:79c089630b38 135 Role_t roleIn,
vcoubard 1078:79c089630b38 136 BLEProtocol::AddressType_t peerAddrTypeIn,
vcoubard 1078:79c089630b38 137 const uint8_t *peerAddrIn,
vcoubard 1078:79c089630b38 138 BLEProtocol::AddressType_t ownAddrTypeIn,
vcoubard 1078:79c089630b38 139 const uint8_t *ownAddrIn,
vcoubard 1078:79c089630b38 140 const ConnectionParams_t *connectionParamsIn) :
rgrover1 710:b2e1a2660ec2 141 handle(handleIn),
rgrover1 710:b2e1a2660ec2 142 role(roleIn),
rgrover1 710:b2e1a2660ec2 143 peerAddrType(peerAddrTypeIn),
rgrover1 710:b2e1a2660ec2 144 peerAddr(),
rgrover1 710:b2e1a2660ec2 145 ownAddrType(ownAddrTypeIn),
rgrover1 710:b2e1a2660ec2 146 ownAddr(),
rgrover1 710:b2e1a2660ec2 147 connectionParams(connectionParamsIn) {
rgrover1 710:b2e1a2660ec2 148 memcpy(peerAddr, peerAddrIn, ADDR_LEN);
rgrover1 710:b2e1a2660ec2 149 memcpy(ownAddr, ownAddrIn, ADDR_LEN);
rgrover1 710:b2e1a2660ec2 150 }
rgrover1 710:b2e1a2660ec2 151 };
rgrover1 710:b2e1a2660ec2 152
rgrover1 829:9072de50087b 153 struct DisconnectionCallbackParams_t {
rgrover1 829:9072de50087b 154 Handle_t handle;
rgrover1 829:9072de50087b 155 DisconnectionReason_t reason;
rgrover1 829:9072de50087b 156
rgrover1 829:9072de50087b 157 DisconnectionCallbackParams_t(Handle_t handleIn,
rgrover1 829:9072de50087b 158 DisconnectionReason_t reasonIn) :
rgrover1 829:9072de50087b 159 handle(handleIn),
rgrover1 829:9072de50087b 160 reason(reasonIn)
rgrover1 829:9072de50087b 161 {}
rgrover1 829:9072de50087b 162 };
rgrover1 829:9072de50087b 163
rgrover1 710:b2e1a2660ec2 164 static const uint16_t UNIT_1_25_MS = 1250; /**< Number of microseconds in 1.25 milliseconds. */
rgrover1 710:b2e1a2660ec2 165 static uint16_t MSEC_TO_GAP_DURATION_UNITS(uint32_t durationInMillis) {
rgrover1 710:b2e1a2660ec2 166 return (durationInMillis * 1000) / UNIT_1_25_MS;
rgrover1 710:b2e1a2660ec2 167 }
rgrover1 766:03f1a26f132f 168
vcoubard 1052:b55e1ad3e1b3 169 typedef FunctionPointerWithContext<TimeoutSource_t> TimeoutEventCallback_t;
vcoubard 1052:b55e1ad3e1b3 170 typedef CallChainOfFunctionPointersWithContext<TimeoutSource_t> TimeoutEventCallbackChain_t;
rgrover1 710:b2e1a2660ec2 171
vcoubard 1052:b55e1ad3e1b3 172 typedef FunctionPointerWithContext<const ConnectionCallbackParams_t *> ConnectionEventCallback_t;
vcoubard 1052:b55e1ad3e1b3 173 typedef CallChainOfFunctionPointersWithContext<const ConnectionCallbackParams_t *> ConnectionEventCallbackChain_t;
vcoubard 1052:b55e1ad3e1b3 174
vcoubard 1052:b55e1ad3e1b3 175 typedef FunctionPointerWithContext<const DisconnectionCallbackParams_t*> DisconnectionEventCallback_t;
vcoubard 1054:f59e5d9a992a 176 typedef CallChainOfFunctionPointersWithContext<const DisconnectionCallbackParams_t*> DisconnectionEventCallbackChain_t;
vcoubard 1052:b55e1ad3e1b3 177
rgrover1 753:0f60274cd3ad 178 typedef FunctionPointerWithContext<bool> RadioNotificationEventCallback_t;
rgrover1 710:b2e1a2660ec2 179
vcoubard 1090:148d8b9b56a5 180 typedef FunctionPointerWithContext<const Gap *> GapShutdownCallback_t;
vcoubard 1090:148d8b9b56a5 181 typedef CallChainOfFunctionPointersWithContext<const Gap *> GapShutdownCallbackChain_t;
vcoubard 1090:148d8b9b56a5 182
rgrover1 710:b2e1a2660ec2 183 /*
rgrover1 710:b2e1a2660ec2 184 * The following functions are meant to be overridden in the platform-specific sub-class.
rgrover1 710:b2e1a2660ec2 185 */
rgrover1 710:b2e1a2660ec2 186 public:
rgrover1 710:b2e1a2660ec2 187 /**
rgrover1 710:b2e1a2660ec2 188 * Set the BTLE MAC address and type. Please note that the address format is
vcoubard 1079:6e2d9514f3df 189 * least significant byte first (LSB). Please refer to BLEProtocol::Address_t.
rgrover1 710:b2e1a2660ec2 190 *
rgrover1 710:b2e1a2660ec2 191 * @return BLE_ERROR_NONE on success.
rgrover1 710:b2e1a2660ec2 192 */
vcoubard 1079:6e2d9514f3df 193 virtual ble_error_t setAddress(BLEProtocol::AddressType_t type, const BLEProtocol::Address_t address) {
rgrover1 734:4872b70437ce 194 /* avoid compiler warnings about unused variables */
rgrover1 734:4872b70437ce 195 (void)type;
rgrover1 734:4872b70437ce 196 (void)address;
rgrover1 734:4872b70437ce 197
rgrover1 728:997ba5e7b3b6 198 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 199 }
rgrover1 710:b2e1a2660ec2 200
rgrover1 710:b2e1a2660ec2 201 /**
rgrover1 710:b2e1a2660ec2 202 * Fetch the BTLE MAC address and type.
rgrover1 710:b2e1a2660ec2 203 *
rgrover1 710:b2e1a2660ec2 204 * @return BLE_ERROR_NONE on success.
rgrover1 710:b2e1a2660ec2 205 */
vcoubard 1079:6e2d9514f3df 206 virtual ble_error_t getAddress(BLEProtocol::AddressType_t *typeP, BLEProtocol::Address_t address) {
vcoubard 1048:efb29faf12fc 207 /* Avoid compiler warnings about unused variables. */
rgrover1 734:4872b70437ce 208 (void)typeP;
rgrover1 734:4872b70437ce 209 (void)address;
rgrover1 734:4872b70437ce 210
rgrover1 728:997ba5e7b3b6 211 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 212 }
rgrover1 710:b2e1a2660ec2 213
rgrover1 710:b2e1a2660ec2 214 /**
vcoubard 1056:ce2fb3d09929 215 * @return Minimum Advertising interval in milliseconds for connectable
vcoubard 1056:ce2fb3d09929 216 * undirected and connectable directed event types.
rgrover1 710:b2e1a2660ec2 217 */
rgrover1 710:b2e1a2660ec2 218 virtual uint16_t getMinAdvertisingInterval(void) const {
rgrover1 742:861ed7eb186d 219 return 0; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 220 }
rgrover1 710:b2e1a2660ec2 221
rgrover1 710:b2e1a2660ec2 222 /**
vcoubard 1056:ce2fb3d09929 223 * @return Minimum Advertising interval in milliseconds for scannable
vcoubard 1056:ce2fb3d09929 224 * undirected and non-connectable undirected event types.
rgrover1 710:b2e1a2660ec2 225 */
rgrover1 710:b2e1a2660ec2 226 virtual uint16_t getMinNonConnectableAdvertisingInterval(void) const {
rgrover1 742:861ed7eb186d 227 return 0; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 228 }
rgrover1 710:b2e1a2660ec2 229
rgrover1 710:b2e1a2660ec2 230 /**
rgrover1 710:b2e1a2660ec2 231 * @return Maximum Advertising interval in milliseconds.
rgrover1 710:b2e1a2660ec2 232 */
rgrover1 710:b2e1a2660ec2 233 virtual uint16_t getMaxAdvertisingInterval(void) const {
rgrover1 742:861ed7eb186d 234 return 0xFFFF; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 235 }
rgrover1 710:b2e1a2660ec2 236
rgrover1 710:b2e1a2660ec2 237 virtual ble_error_t stopAdvertising(void) {
rgrover1 728:997ba5e7b3b6 238 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 239 }
rgrover1 710:b2e1a2660ec2 240
rgrover1 710:b2e1a2660ec2 241 /**
rgrover1 710:b2e1a2660ec2 242 * Stop scanning. The current scanning parameters remain in effect.
rgrover1 710:b2e1a2660ec2 243 *
rgrover1 710:b2e1a2660ec2 244 * @retval BLE_ERROR_NONE if successfully stopped scanning procedure.
rgrover1 710:b2e1a2660ec2 245 */
rgrover1 710:b2e1a2660ec2 246 virtual ble_error_t stopScan() {
rgrover1 728:997ba5e7b3b6 247 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 248 }
rgrover1 710:b2e1a2660ec2 249
rgrover1 710:b2e1a2660ec2 250 /**
rgrover1 710:b2e1a2660ec2 251 * Create a connection (GAP Link Establishment).
rgrover1 710:b2e1a2660ec2 252 *
rgrover1 710:b2e1a2660ec2 253 * @param peerAddr
rgrover1 710:b2e1a2660ec2 254 * 48-bit address, LSB format.
rgrover1 710:b2e1a2660ec2 255 * @param peerAddrType
rgrover1 710:b2e1a2660ec2 256 * Address type of the peer.
rgrover1 710:b2e1a2660ec2 257 * @param connectionParams
rgrover1 710:b2e1a2660ec2 258 * Connection parameters.
rgrover1 710:b2e1a2660ec2 259 * @param scanParams
rgrover1 710:b2e1a2660ec2 260 * Paramters to be used while scanning for the peer.
rgrover1 710:b2e1a2660ec2 261 * @return BLE_ERROR_NONE if connection establishment procedure is started
rgrover1 829:9072de50087b 262 * successfully. The connectionCallChain (if set) will be invoked upon
rgrover1 710:b2e1a2660ec2 263 * a connection event.
rgrover1 710:b2e1a2660ec2 264 */
vcoubard 1079:6e2d9514f3df 265 virtual ble_error_t connect(const BLEProtocol::Address_t peerAddr,
vcoubard 1079:6e2d9514f3df 266 BLEProtocol::AddressType_t peerAddrType,
vcoubard 1079:6e2d9514f3df 267 const ConnectionParams_t *connectionParams,
vcoubard 1079:6e2d9514f3df 268 const GapScanningParams *scanParams) {
vcoubard 1048:efb29faf12fc 269 /* Avoid compiler warnings about unused variables. */
rgrover1 734:4872b70437ce 270 (void)peerAddr;
rgrover1 734:4872b70437ce 271 (void)peerAddrType;
rgrover1 734:4872b70437ce 272 (void)connectionParams;
rgrover1 734:4872b70437ce 273 (void)scanParams;
rgrover1 734:4872b70437ce 274
rgrover1 728:997ba5e7b3b6 275 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 276 }
rgrover1 710:b2e1a2660ec2 277
rgrover1 710:b2e1a2660ec2 278 /**
vcoubard 1107:93b0b9304c53 279 * Create a connection (GAP Link Establishment).
vcoubard 1107:93b0b9304c53 280 *
vcoubard 1107:93b0b9304c53 281 * @note: deprecated. This funtion overloads Gap::connect(const BLEProtocol::Address_t peerAddr,
vcoubard 1107:93b0b9304c53 282 BLEProtocol::AddressType_t peerAddrType,
vcoubard 1107:93b0b9304c53 283 const ConnectionParams_t *connectionParams,
vcoubard 1107:93b0b9304c53 284 const GapScanningParams *scanParams)
vcoubard 1107:93b0b9304c53 285 * to maintain backward compatibility for change from Gap::AddressType_t to BLEProtocol::AddressType_t
vcoubard 1107:93b0b9304c53 286 */
vcoubard 1107:93b0b9304c53 287 ble_error_t connect(const BLEProtocol::Address_t peerAddr,
vcoubard 1107:93b0b9304c53 288 AddressTypeOverload_t peerAddrType,
vcoubard 1107:93b0b9304c53 289 const ConnectionParams_t *connectionParams,
vcoubard 1107:93b0b9304c53 290 const GapScanningParams *scanParams) {
vcoubard 1107:93b0b9304c53 291 return connect(peerAddr, (BLEProtocol::AddressType_t) peerAddrType, connectionParams, scanParams);
vcoubard 1107:93b0b9304c53 292 }
vcoubard 1107:93b0b9304c53 293
vcoubard 1107:93b0b9304c53 294 /**
rgrover1 710:b2e1a2660ec2 295 * This call initiates the disconnection procedure, and its completion will
rgrover1 710:b2e1a2660ec2 296 * be communicated to the application with an invocation of the
rgrover1 710:b2e1a2660ec2 297 * disconnectionCallback.
rgrover1 710:b2e1a2660ec2 298 *
rgrover1 710:b2e1a2660ec2 299 * @param reason
vcoubard 1048:efb29faf12fc 300 * The reason for disconnection; to be sent back to the peer.
rgrover1 710:b2e1a2660ec2 301 */
rgrover1 710:b2e1a2660ec2 302 virtual ble_error_t disconnect(Handle_t connectionHandle, DisconnectionReason_t reason) {
rgrover1 734:4872b70437ce 303 /* avoid compiler warnings about unused variables */
rgrover1 734:4872b70437ce 304 (void)connectionHandle;
rgrover1 734:4872b70437ce 305 (void)reason;
rgrover1 734:4872b70437ce 306
rgrover1 728:997ba5e7b3b6 307 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 308 }
rgrover1 710:b2e1a2660ec2 309
rgrover1 710:b2e1a2660ec2 310 /**
rgrover1 710:b2e1a2660ec2 311 * This call initiates the disconnection procedure, and its completion will
rgrover1 710:b2e1a2660ec2 312 * be communicated to the application with an invocation of the
rgrover1 710:b2e1a2660ec2 313 * disconnectionCallback.
rgrover1 710:b2e1a2660ec2 314 *
rgrover1 710:b2e1a2660ec2 315 * @param reason
vcoubard 1048:efb29faf12fc 316 * The reason for disconnection; to be sent back to the peer.
rgrover1 710:b2e1a2660ec2 317 *
vcoubard 1048:efb29faf12fc 318 * @note: This version of disconnect() doesn't take a connection handle. It
vcoubard 1048:efb29faf12fc 319 * works reliably only for stacks that are limited to a single
rgrover1 710:b2e1a2660ec2 320 * connection. This API should be considered *deprecated* in favour of the
vcoubard 1048:efb29faf12fc 321 * alternative, which takes a connection handle. It will be dropped in the future.
rgrover1 710:b2e1a2660ec2 322 */
rgrover1 710:b2e1a2660ec2 323 virtual ble_error_t disconnect(DisconnectionReason_t reason) {
vcoubard 1048:efb29faf12fc 324 /* Avoid compiler warnings about unused variables. */
rgrover1 734:4872b70437ce 325 (void)reason;
rgrover1 734:4872b70437ce 326
rgrover1 728:997ba5e7b3b6 327 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 328 }
rgrover1 710:b2e1a2660ec2 329
rgrover1 710:b2e1a2660ec2 330 /**
rgrover1 710:b2e1a2660ec2 331 * Get the GAP peripheral preferred connection parameters. These are the
rgrover1 710:b2e1a2660ec2 332 * defaults that the peripheral would like to have in a connection. The
rgrover1 710:b2e1a2660ec2 333 * choice of the connection parameters is eventually up to the central.
rgrover1 710:b2e1a2660ec2 334 *
rgrover1 710:b2e1a2660ec2 335 * @param[out] params
rgrover1 710:b2e1a2660ec2 336 * The structure where the parameters will be stored. Memory
rgrover1 710:b2e1a2660ec2 337 * for this is owned by the caller.
rgrover1 710:b2e1a2660ec2 338 *
rgrover1 710:b2e1a2660ec2 339 * @return BLE_ERROR_NONE if the parameters were successfully filled into
rgrover1 710:b2e1a2660ec2 340 * the given structure pointed to by params.
rgrover1 710:b2e1a2660ec2 341 */
rgrover1 710:b2e1a2660ec2 342 virtual ble_error_t getPreferredConnectionParams(ConnectionParams_t *params) {
vcoubard 1048:efb29faf12fc 343 /* Avoid compiler warnings about unused variables. */
rgrover1 734:4872b70437ce 344 (void)params;
rgrover1 734:4872b70437ce 345
rgrover1 728:997ba5e7b3b6 346 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 347 }
rgrover1 710:b2e1a2660ec2 348
rgrover1 710:b2e1a2660ec2 349 /**
rgrover1 710:b2e1a2660ec2 350 * Set the GAP peripheral preferred connection parameters. These are the
rgrover1 710:b2e1a2660ec2 351 * defaults that the peripheral would like to have in a connection. The
rgrover1 710:b2e1a2660ec2 352 * choice of the connection parameters is eventually up to the central.
rgrover1 710:b2e1a2660ec2 353 *
rgrover1 710:b2e1a2660ec2 354 * @param[in] params
rgrover1 710:b2e1a2660ec2 355 * The structure containing the desired parameters.
rgrover1 710:b2e1a2660ec2 356 */
rgrover1 710:b2e1a2660ec2 357 virtual ble_error_t setPreferredConnectionParams(const ConnectionParams_t *params) {
vcoubard 1048:efb29faf12fc 358 /* Avoid compiler warnings about unused variables. */
rgrover1 734:4872b70437ce 359 (void)params;
rgrover1 734:4872b70437ce 360
rgrover1 728:997ba5e7b3b6 361 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 362 }
rgrover1 710:b2e1a2660ec2 363
rgrover1 710:b2e1a2660ec2 364 /**
rgrover1 816:2b4f0ef8c06e 365 * Update connection parameters.
vcoubard 1048:efb29faf12fc 366 * In the central role this will initiate a Link Layer connection parameter update procedure.
vcoubard 1048:efb29faf12fc 367 * In the peripheral role, this will send the corresponding L2CAP request and wait for
rgrover1 816:2b4f0ef8c06e 368 * the central to perform the procedure.
rgrover1 816:2b4f0ef8c06e 369 *
rgrover1 710:b2e1a2660ec2 370 * @param[in] handle
vcoubard 1048:efb29faf12fc 371 * Connection Handle.
rgrover1 710:b2e1a2660ec2 372 * @param[in] params
rgrover1 710:b2e1a2660ec2 373 * Pointer to desired connection parameters. If NULL is provided on a peripheral role,
rgrover1 710:b2e1a2660ec2 374 * the parameters in the PPCP characteristic of the GAP service will be used instead.
rgrover1 710:b2e1a2660ec2 375 */
rgrover1 710:b2e1a2660ec2 376 virtual ble_error_t updateConnectionParams(Handle_t handle, const ConnectionParams_t *params) {
rgrover1 734:4872b70437ce 377 /* avoid compiler warnings about unused variables */
rgrover1 734:4872b70437ce 378 (void)handle;
rgrover1 734:4872b70437ce 379 (void)params;
rgrover1 734:4872b70437ce 380
rgrover1 728:997ba5e7b3b6 381 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 382 }
rgrover1 710:b2e1a2660ec2 383
rgrover1 710:b2e1a2660ec2 384 /**
rgrover1 710:b2e1a2660ec2 385 * Set the device name characteristic in the GAP service.
rgrover1 710:b2e1a2660ec2 386 * @param[in] deviceName
rgrover1 710:b2e1a2660ec2 387 * The new value for the device-name. This is a UTF-8 encoded, <b>NULL-terminated</b> string.
rgrover1 710:b2e1a2660ec2 388 */
rgrover1 710:b2e1a2660ec2 389 virtual ble_error_t setDeviceName(const uint8_t *deviceName) {
vcoubard 1048:efb29faf12fc 390 /* Avoid compiler warnings about unused variables. */
rgrover1 734:4872b70437ce 391 (void)deviceName;
rgrover1 734:4872b70437ce 392
rgrover1 728:997ba5e7b3b6 393 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 394 }
rgrover1 710:b2e1a2660ec2 395
rgrover1 710:b2e1a2660ec2 396 /**
rgrover1 710:b2e1a2660ec2 397 * Get the value of the device name characteristic in the GAP service.
rgrover1 710:b2e1a2660ec2 398 * @param[out] deviceName
rgrover1 710:b2e1a2660ec2 399 * Pointer to an empty buffer where the UTF-8 *non NULL-
rgrover1 710:b2e1a2660ec2 400 * terminated* string will be placed. Set this
rgrover1 710:b2e1a2660ec2 401 * value to NULL in order to obtain the deviceName-length
rgrover1 710:b2e1a2660ec2 402 * from the 'length' parameter.
rgrover1 710:b2e1a2660ec2 403 *
rgrover1 710:b2e1a2660ec2 404 * @param[in/out] lengthP
rgrover1 710:b2e1a2660ec2 405 * (on input) Length of the buffer pointed to by deviceName;
rgrover1 710:b2e1a2660ec2 406 * (on output) the complete device name length (without the
rgrover1 710:b2e1a2660ec2 407 * null terminator).
rgrover1 710:b2e1a2660ec2 408 *
rgrover1 710:b2e1a2660ec2 409 * @note If the device name is longer than the size of the supplied buffer,
rgrover1 710:b2e1a2660ec2 410 * length will return the complete device name length, and not the
rgrover1 710:b2e1a2660ec2 411 * number of bytes actually returned in deviceName. The application may
rgrover1 710:b2e1a2660ec2 412 * use this information to retry with a suitable buffer size.
rgrover1 710:b2e1a2660ec2 413 */
rgrover1 710:b2e1a2660ec2 414 virtual ble_error_t getDeviceName(uint8_t *deviceName, unsigned *lengthP) {
rgrover1 734:4872b70437ce 415 /* avoid compiler warnings about unused variables */
rgrover1 734:4872b70437ce 416 (void)deviceName;
rgrover1 734:4872b70437ce 417 (void)lengthP;
rgrover1 734:4872b70437ce 418
rgrover1 728:997ba5e7b3b6 419 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 420 }
rgrover1 710:b2e1a2660ec2 421
rgrover1 710:b2e1a2660ec2 422 /**
rgrover1 710:b2e1a2660ec2 423 * Set the appearance characteristic in the GAP service.
rgrover1 710:b2e1a2660ec2 424 * @param[in] appearance
rgrover1 710:b2e1a2660ec2 425 * The new value for the device-appearance.
rgrover1 710:b2e1a2660ec2 426 */
rgrover1 710:b2e1a2660ec2 427 virtual ble_error_t setAppearance(GapAdvertisingData::Appearance appearance) {
vcoubard 1048:efb29faf12fc 428 /* Avoid compiler warnings about unused variables. */
rgrover1 734:4872b70437ce 429 (void)appearance;
rgrover1 734:4872b70437ce 430
rgrover1 728:997ba5e7b3b6 431 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 432 }
rgrover1 710:b2e1a2660ec2 433
rgrover1 710:b2e1a2660ec2 434 /**
rgrover1 710:b2e1a2660ec2 435 * Get the appearance characteristic in the GAP service.
rgrover1 710:b2e1a2660ec2 436 * @param[out] appearance
rgrover1 710:b2e1a2660ec2 437 * The new value for the device-appearance.
rgrover1 710:b2e1a2660ec2 438 */
rgrover1 710:b2e1a2660ec2 439 virtual ble_error_t getAppearance(GapAdvertisingData::Appearance *appearanceP) {
vcoubard 1048:efb29faf12fc 440 /* Avoid compiler warnings about unused variables. */
rgrover1 734:4872b70437ce 441 (void)appearanceP;
rgrover1 734:4872b70437ce 442
rgrover1 728:997ba5e7b3b6 443 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 444 }
rgrover1 710:b2e1a2660ec2 445
rgrover1 710:b2e1a2660ec2 446 /**
rgrover1 710:b2e1a2660ec2 447 * Set the radio's transmit power.
rgrover1 710:b2e1a2660ec2 448 * @param[in] txPower Radio transmit power in dBm.
rgrover1 710:b2e1a2660ec2 449 */
rgrover1 710:b2e1a2660ec2 450 virtual ble_error_t setTxPower(int8_t txPower) {
vcoubard 1048:efb29faf12fc 451 /* Avoid compiler warnings about unused variables. */
rgrover1 734:4872b70437ce 452 (void)txPower;
rgrover1 734:4872b70437ce 453
rgrover1 728:997ba5e7b3b6 454 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 455 }
rgrover1 710:b2e1a2660ec2 456
rgrover1 710:b2e1a2660ec2 457 /**
rgrover1 710:b2e1a2660ec2 458 * Query the underlying stack for permitted arguments for setTxPower().
rgrover1 710:b2e1a2660ec2 459 *
rgrover1 710:b2e1a2660ec2 460 * @param[out] valueArrayPP
rgrover1 710:b2e1a2660ec2 461 * Out parameter to receive the immutable array of Tx values.
rgrover1 710:b2e1a2660ec2 462 * @param[out] countP
rgrover1 710:b2e1a2660ec2 463 * Out parameter to receive the array's size.
rgrover1 710:b2e1a2660ec2 464 */
rgrover1 710:b2e1a2660ec2 465 virtual void getPermittedTxPowerValues(const int8_t **valueArrayPP, size_t *countP) {
vcoubard 1048:efb29faf12fc 466 /* Avoid compiler warnings about unused variables. */
rgrover1 734:4872b70437ce 467 (void)valueArrayPP;
rgrover1 734:4872b70437ce 468 (void)countP;
rgrover1 734:4872b70437ce 469
rgrover1 742:861ed7eb186d 470 *countP = 0; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 471 }
rgrover1 710:b2e1a2660ec2 472
rgrover1 710:b2e1a2660ec2 473 protected:
rgrover1 710:b2e1a2660ec2 474 /* Override the following in the underlying adaptation layer to provide the functionality of scanning. */
rgrover1 710:b2e1a2660ec2 475 virtual ble_error_t startRadioScan(const GapScanningParams &scanningParams) {
rgrover1 772:b6d27ab66c94 476 (void)scanningParams;
rgrover1 728:997ba5e7b3b6 477 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 478 }
rgrover1 710:b2e1a2660ec2 479
rgrover1 710:b2e1a2660ec2 480 /*
rgrover1 710:b2e1a2660ec2 481 * APIs with non-virtual implementations.
rgrover1 710:b2e1a2660ec2 482 */
rgrover1 710:b2e1a2660ec2 483 public:
rgrover1 710:b2e1a2660ec2 484 /**
vcoubard 1048:efb29faf12fc 485 * Returns the current GAP state of the device using a bitmask that
vcoubard 1048:efb29faf12fc 486 * describes whether the device is advertising or connected.
rgrover1 710:b2e1a2660ec2 487 */
rgrover1 710:b2e1a2660ec2 488 GapState_t getState(void) const {
rgrover1 710:b2e1a2660ec2 489 return state;
rgrover1 710:b2e1a2660ec2 490 }
rgrover1 710:b2e1a2660ec2 491
rgrover1 710:b2e1a2660ec2 492 /**
rgrover1 710:b2e1a2660ec2 493 * Set the GAP advertising mode to use for this device.
rgrover1 710:b2e1a2660ec2 494 */
rgrover1 710:b2e1a2660ec2 495 void setAdvertisingType(GapAdvertisingParams::AdvertisingType_t advType) {
rgrover1 710:b2e1a2660ec2 496 _advParams.setAdvertisingType(advType);
rgrover1 710:b2e1a2660ec2 497 }
rgrover1 710:b2e1a2660ec2 498
rgrover1 710:b2e1a2660ec2 499 /**
rgrover1 710:b2e1a2660ec2 500 * @param[in] interval
rgrover1 710:b2e1a2660ec2 501 * Advertising interval in units of milliseconds. Advertising
rgrover1 710:b2e1a2660ec2 502 * is disabled if interval is 0. If interval is smaller than
rgrover1 710:b2e1a2660ec2 503 * the minimum supported value, then the minimum supported
rgrover1 710:b2e1a2660ec2 504 * value is used instead. This minimum value can be discovered
rgrover1 710:b2e1a2660ec2 505 * using getMinAdvertisingInterval().
rgrover1 710:b2e1a2660ec2 506 *
rgrover1 710:b2e1a2660ec2 507 * This field must be set to 0 if connectionMode is equal
rgrover1 710:b2e1a2660ec2 508 * to ADV_CONNECTABLE_DIRECTED.
rgrover1 710:b2e1a2660ec2 509 *
rgrover1 710:b2e1a2660ec2 510 * @note: Decreasing this value will allow central devices to detect a
vcoubard 1048:efb29faf12fc 511 * peripheral faster, at the expense of more power being used by the radio
rgrover1 710:b2e1a2660ec2 512 * due to the higher data transmit rate.
rgrover1 710:b2e1a2660ec2 513 *
rgrover1 710:b2e1a2660ec2 514 * @Note: [WARNING] This API previously used 0.625ms as the unit for its
rgrover1 710:b2e1a2660ec2 515 * 'interval' argument. That required an explicit conversion from
rgrover1 710:b2e1a2660ec2 516 * milliseconds using Gap::MSEC_TO_GAP_DURATION_UNITS(). This conversion is
rgrover1 710:b2e1a2660ec2 517 * no longer required as the new units are milliseconds. Any application
vcoubard 1048:efb29faf12fc 518 * code depending on the old semantics needs to be updated accordingly.
rgrover1 710:b2e1a2660ec2 519 */
rgrover1 710:b2e1a2660ec2 520 void setAdvertisingInterval(uint16_t interval) {
rgrover1 710:b2e1a2660ec2 521 if (interval == 0) {
rgrover1 710:b2e1a2660ec2 522 stopAdvertising();
rgrover1 710:b2e1a2660ec2 523 } else if (interval < getMinAdvertisingInterval()) {
rgrover1 710:b2e1a2660ec2 524 interval = getMinAdvertisingInterval();
rgrover1 710:b2e1a2660ec2 525 }
rgrover1 786:d6d7087d8377 526 _advParams.setInterval(interval);
rgrover1 710:b2e1a2660ec2 527 }
rgrover1 710:b2e1a2660ec2 528
rgrover1 710:b2e1a2660ec2 529 /**
rgrover1 710:b2e1a2660ec2 530 * @param[in] timeout
rgrover1 710:b2e1a2660ec2 531 * Advertising timeout (in seconds) between 0x1 and 0x3FFF (1
rgrover1 710:b2e1a2660ec2 532 * and 16383). Use 0 to disable the advertising timeout.
rgrover1 710:b2e1a2660ec2 533 */
rgrover1 710:b2e1a2660ec2 534 void setAdvertisingTimeout(uint16_t timeout) {
rgrover1 710:b2e1a2660ec2 535 _advParams.setTimeout(timeout);
rgrover1 710:b2e1a2660ec2 536 }
rgrover1 710:b2e1a2660ec2 537
rgrover1 710:b2e1a2660ec2 538 /**
rgrover1 710:b2e1a2660ec2 539 * Start advertising.
rgrover1 710:b2e1a2660ec2 540 */
rgrover1 710:b2e1a2660ec2 541 ble_error_t startAdvertising(void) {
vcoubard 1048:efb29faf12fc 542 setAdvertisingData(); /* Update the underlying stack. */
rgrover1 710:b2e1a2660ec2 543 return startAdvertising(_advParams);
rgrover1 710:b2e1a2660ec2 544 }
rgrover1 710:b2e1a2660ec2 545
rgrover1 710:b2e1a2660ec2 546 /**
rgrover1 710:b2e1a2660ec2 547 * Reset any advertising payload prepared from prior calls to
rgrover1 710:b2e1a2660ec2 548 * accumulateAdvertisingPayload(). This automatically propagates the re-
vcoubard 1048:efb29faf12fc 549 * initialized advertising payload to the underlying stack.
rgrover1 710:b2e1a2660ec2 550 */
rgrover1 710:b2e1a2660ec2 551 void clearAdvertisingPayload(void) {
rgrover1 710:b2e1a2660ec2 552 _advPayload.clear();
rgrover1 710:b2e1a2660ec2 553 setAdvertisingData();
rgrover1 710:b2e1a2660ec2 554 }
rgrover1 710:b2e1a2660ec2 555
rgrover1 710:b2e1a2660ec2 556 /**
rgrover1 710:b2e1a2660ec2 557 * Accumulate an AD structure in the advertising payload. Please note that
rgrover1 710:b2e1a2660ec2 558 * the payload is limited to 31 bytes. The SCAN_RESPONSE message may be used
vcoubard 1048:efb29faf12fc 559 * as an additional 31 bytes if the advertising payload is too
rgrover1 710:b2e1a2660ec2 560 * small.
rgrover1 710:b2e1a2660ec2 561 *
rgrover1 710:b2e1a2660ec2 562 * @param[in] flags
rgrover1 710:b2e1a2660ec2 563 * The flags to be added. Please refer to
rgrover1 710:b2e1a2660ec2 564 * GapAdvertisingData::Flags for valid flags. Multiple
rgrover1 710:b2e1a2660ec2 565 * flags may be specified in combination.
rgrover1 710:b2e1a2660ec2 566 */
rgrover1 710:b2e1a2660ec2 567 ble_error_t accumulateAdvertisingPayload(uint8_t flags) {
rgrover1 710:b2e1a2660ec2 568 ble_error_t rc;
rgrover1 710:b2e1a2660ec2 569 if ((rc = _advPayload.addFlags(flags)) != BLE_ERROR_NONE) {
rgrover1 710:b2e1a2660ec2 570 return rc;
rgrover1 710:b2e1a2660ec2 571 }
rgrover1 710:b2e1a2660ec2 572
rgrover1 710:b2e1a2660ec2 573 return setAdvertisingData();
rgrover1 710:b2e1a2660ec2 574 }
rgrover1 710:b2e1a2660ec2 575
rgrover1 710:b2e1a2660ec2 576 /**
rgrover1 710:b2e1a2660ec2 577 * Accumulate an AD structure in the advertising payload. Please note that
rgrover1 710:b2e1a2660ec2 578 * the payload is limited to 31 bytes. The SCAN_RESPONSE message may be used
vcoubard 1048:efb29faf12fc 579 * as an additional 31 bytes if the advertising payload is too
rgrover1 710:b2e1a2660ec2 580 * small.
rgrover1 710:b2e1a2660ec2 581 *
rgrover1 710:b2e1a2660ec2 582 * @param app
rgrover1 710:b2e1a2660ec2 583 * The appearance of the peripheral.
rgrover1 710:b2e1a2660ec2 584 */
rgrover1 710:b2e1a2660ec2 585 ble_error_t accumulateAdvertisingPayload(GapAdvertisingData::Appearance app) {
rgrover1 710:b2e1a2660ec2 586 setAppearance(app);
rgrover1 710:b2e1a2660ec2 587
rgrover1 710:b2e1a2660ec2 588 ble_error_t rc;
rgrover1 710:b2e1a2660ec2 589 if ((rc = _advPayload.addAppearance(app)) != BLE_ERROR_NONE) {
rgrover1 710:b2e1a2660ec2 590 return rc;
rgrover1 710:b2e1a2660ec2 591 }
rgrover1 710:b2e1a2660ec2 592
rgrover1 710:b2e1a2660ec2 593 return setAdvertisingData();
rgrover1 710:b2e1a2660ec2 594 }
rgrover1 710:b2e1a2660ec2 595
rgrover1 710:b2e1a2660ec2 596 /**
rgrover1 710:b2e1a2660ec2 597 * Accumulate an AD structure in the advertising payload. Please note that
rgrover1 710:b2e1a2660ec2 598 * the payload is limited to 31 bytes. The SCAN_RESPONSE message may be used
vcoubard 1048:efb29faf12fc 599 * as an additional 31 bytes if the advertising payload is too
rgrover1 710:b2e1a2660ec2 600 * small.
rgrover1 710:b2e1a2660ec2 601 *
vcoubard 1048:efb29faf12fc 602 * @param power
rgrover1 764:1e560f0d45e1 603 * The max transmit power to be used by the controller (in dBm).
rgrover1 710:b2e1a2660ec2 604 */
rgrover1 710:b2e1a2660ec2 605 ble_error_t accumulateAdvertisingPayloadTxPower(int8_t power) {
rgrover1 710:b2e1a2660ec2 606 ble_error_t rc;
rgrover1 710:b2e1a2660ec2 607 if ((rc = _advPayload.addTxPower(power)) != BLE_ERROR_NONE) {
rgrover1 710:b2e1a2660ec2 608 return rc;
rgrover1 710:b2e1a2660ec2 609 }
rgrover1 710:b2e1a2660ec2 610
rgrover1 710:b2e1a2660ec2 611 return setAdvertisingData();
rgrover1 710:b2e1a2660ec2 612 }
rgrover1 710:b2e1a2660ec2 613
rgrover1 710:b2e1a2660ec2 614 /**
rgrover1 710:b2e1a2660ec2 615 * Accumulate a variable length byte-stream as an AD structure in the
rgrover1 710:b2e1a2660ec2 616 * advertising payload. Please note that the payload is limited to 31 bytes.
rgrover1 710:b2e1a2660ec2 617 * The SCAN_RESPONSE message may be used as an additional 31 bytes if the
vcoubard 1048:efb29faf12fc 618 * advertising payload is too small.
rgrover1 710:b2e1a2660ec2 619 *
vcoubard 1048:efb29faf12fc 620 * @param type The type describing the variable length data.
vcoubard 1048:efb29faf12fc 621 * @param data Data bytes.
vcoubard 1048:efb29faf12fc 622 * @param len Length of data.
vcoubard 1104:0244fbb0324e 623 *
vcoubard 1104:0244fbb0324e 624 * @return BLE_ERROR_NONE if the advertisement payload was updated based on
vcoubard 1104:0244fbb0324e 625 * matching AD type; otherwise, an appropriate error.
vcoubard 1104:0244fbb0324e 626 *
vcoubard 1104:0244fbb0324e 627 * @note When the specified AD type is INCOMPLETE_LIST_16BIT_SERVICE_IDS,
vcoubard 1104:0244fbb0324e 628 * COMPLETE_LIST_16BIT_SERVICE_IDS, INCOMPLETE_LIST_32BIT_SERVICE_IDS,
vcoubard 1104:0244fbb0324e 629 * COMPLETE_LIST_32BIT_SERVICE_IDS, INCOMPLETE_LIST_128BIT_SERVICE_IDS,
vcoubard 1104:0244fbb0324e 630 * COMPLETE_LIST_128BIT_SERVICE_IDS or LIST_128BIT_SOLICITATION_IDS the
vcoubard 1104:0244fbb0324e 631 * supplied value is appended to the values previously added to the
vcoubard 1104:0244fbb0324e 632 * payload.
rgrover1 710:b2e1a2660ec2 633 */
rgrover1 710:b2e1a2660ec2 634 ble_error_t accumulateAdvertisingPayload(GapAdvertisingData::DataType type, const uint8_t *data, uint8_t len) {
rgrover1 710:b2e1a2660ec2 635 if (type == GapAdvertisingData::COMPLETE_LOCAL_NAME) {
rgrover1 710:b2e1a2660ec2 636 setDeviceName(data);
rgrover1 710:b2e1a2660ec2 637 }
rgrover1 710:b2e1a2660ec2 638
rgrover1 710:b2e1a2660ec2 639 ble_error_t rc;
rgrover1 710:b2e1a2660ec2 640 if ((rc = _advPayload.addData(type, data, len)) != BLE_ERROR_NONE) {
rgrover1 710:b2e1a2660ec2 641 return rc;
rgrover1 710:b2e1a2660ec2 642 }
rgrover1 710:b2e1a2660ec2 643
rgrover1 710:b2e1a2660ec2 644 return setAdvertisingData();
rgrover1 710:b2e1a2660ec2 645 }
rgrover1 710:b2e1a2660ec2 646
rgrover1 710:b2e1a2660ec2 647 /**
rgrover1 765:4cd91998cd48 648 * Update a particular ADV field in the advertising payload (based on
vcoubard 1104:0244fbb0324e 649 * matching type).
rgrover1 763:36c3e2b1f1ae 650 *
vcoubard 1048:efb29faf12fc 651 * @param[in] type The ADV type field describing the variable length data.
vcoubard 1048:efb29faf12fc 652 * @param[in] data Data bytes.
vcoubard 1048:efb29faf12fc 653 * @param[in] len Length of data.
rgrover1 765:4cd91998cd48 654 *
rgrover1 765:4cd91998cd48 655 * @note: If advertisements are enabled, then the update will take effect immediately.
rgrover1 765:4cd91998cd48 656 *
rgrover1 765:4cd91998cd48 657 * @return BLE_ERROR_NONE if the advertisement payload was updated based on
vcoubard 1104:0244fbb0324e 658 * matching AD type; otherwise, an appropriate error.
rgrover1 763:36c3e2b1f1ae 659 */
rgrover1 763:36c3e2b1f1ae 660 ble_error_t updateAdvertisingPayload(GapAdvertisingData::DataType type, const uint8_t *data, uint8_t len) {
rgrover1 763:36c3e2b1f1ae 661 if (type == GapAdvertisingData::COMPLETE_LOCAL_NAME) {
rgrover1 763:36c3e2b1f1ae 662 setDeviceName(data);
rgrover1 763:36c3e2b1f1ae 663 }
rgrover1 763:36c3e2b1f1ae 664
rgrover1 763:36c3e2b1f1ae 665 ble_error_t rc;
rgrover1 763:36c3e2b1f1ae 666 if ((rc = _advPayload.updateData(type, data, len)) != BLE_ERROR_NONE) {
rgrover1 763:36c3e2b1f1ae 667 return rc;
rgrover1 763:36c3e2b1f1ae 668 }
rgrover1 763:36c3e2b1f1ae 669
rgrover1 763:36c3e2b1f1ae 670 return setAdvertisingData();
rgrover1 763:36c3e2b1f1ae 671 }
rgrover1 763:36c3e2b1f1ae 672
rgrover1 763:36c3e2b1f1ae 673 /**
vcoubard 1048:efb29faf12fc 674 * Set up a particular, user-constructed advertisement payload for the
rgrover1 710:b2e1a2660ec2 675 * underlying stack. It would be uncommon for this API to be used directly;
rgrover1 710:b2e1a2660ec2 676 * there are other APIs to build an advertisement payload (see above).
rgrover1 710:b2e1a2660ec2 677 */
rgrover1 710:b2e1a2660ec2 678 ble_error_t setAdvertisingPayload(const GapAdvertisingData &payload) {
rgrover1 710:b2e1a2660ec2 679 _advPayload = payload;
rgrover1 710:b2e1a2660ec2 680 return setAdvertisingData();
rgrover1 710:b2e1a2660ec2 681 }
rgrover1 710:b2e1a2660ec2 682
rgrover1 710:b2e1a2660ec2 683 /**
rgrover1 710:b2e1a2660ec2 684 * @return Read back advertising data. Useful for storing and
rgrover1 710:b2e1a2660ec2 685 * restoring payload.
rgrover1 710:b2e1a2660ec2 686 */
rgrover1 710:b2e1a2660ec2 687 const GapAdvertisingData &getAdvertisingPayload(void) const {
rgrover1 710:b2e1a2660ec2 688 return _advPayload;
rgrover1 710:b2e1a2660ec2 689 }
rgrover1 710:b2e1a2660ec2 690
rgrover1 710:b2e1a2660ec2 691 /**
rgrover1 710:b2e1a2660ec2 692 * Accumulate a variable length byte-stream as an AD structure in the
rgrover1 710:b2e1a2660ec2 693 * scanResponse payload.
rgrover1 710:b2e1a2660ec2 694 *
vcoubard 1048:efb29faf12fc 695 * @param[in] type The type describing the variable length data.
vcoubard 1048:efb29faf12fc 696 * @param[in] data Data bytes.
vcoubard 1048:efb29faf12fc 697 * @param[in] len Length of data.
rgrover1 710:b2e1a2660ec2 698 */
rgrover1 710:b2e1a2660ec2 699 ble_error_t accumulateScanResponse(GapAdvertisingData::DataType type, const uint8_t *data, uint8_t len) {
rgrover1 710:b2e1a2660ec2 700 ble_error_t rc;
rgrover1 710:b2e1a2660ec2 701 if ((rc = _scanResponse.addData(type, data, len)) != BLE_ERROR_NONE) {
rgrover1 710:b2e1a2660ec2 702 return rc;
rgrover1 710:b2e1a2660ec2 703 }
rgrover1 710:b2e1a2660ec2 704
rgrover1 710:b2e1a2660ec2 705 return setAdvertisingData();
rgrover1 710:b2e1a2660ec2 706 }
rgrover1 710:b2e1a2660ec2 707
rgrover1 710:b2e1a2660ec2 708 /**
rgrover1 710:b2e1a2660ec2 709 * Reset any scan response prepared from prior calls to
rgrover1 710:b2e1a2660ec2 710 * accumulateScanResponse().
rgrover1 710:b2e1a2660ec2 711 *
rgrover1 710:b2e1a2660ec2 712 * Note: This should be followed by a call to setAdvertisingPayload() or
rgrover1 710:b2e1a2660ec2 713 * startAdvertising() before the update takes effect.
rgrover1 710:b2e1a2660ec2 714 */
rgrover1 710:b2e1a2660ec2 715 void clearScanResponse(void) {
rgrover1 710:b2e1a2660ec2 716 _scanResponse.clear();
rgrover1 710:b2e1a2660ec2 717 setAdvertisingData();
rgrover1 710:b2e1a2660ec2 718 }
rgrover1 710:b2e1a2660ec2 719
rgrover1 710:b2e1a2660ec2 720 /**
vcoubard 1048:efb29faf12fc 721 * Set up parameters for GAP scanning (observer mode).
rgrover1 710:b2e1a2660ec2 722 * @param[in] interval
rgrover1 710:b2e1a2660ec2 723 * Scan interval (in milliseconds) [valid values lie between 2.5ms and 10.24s].
rgrover1 710:b2e1a2660ec2 724 * @param[in] window
rgrover1 710:b2e1a2660ec2 725 * Scan Window (in milliseconds) [valid values lie between 2.5ms and 10.24s].
rgrover1 710:b2e1a2660ec2 726 * @param[in] timeout
vcoubard 1048:efb29faf12fc 727 * Scan timeout (in seconds) between 0x0001 and 0xFFFF; 0x0000 disables the timeout.
rgrover1 710:b2e1a2660ec2 728 * @param[in] activeScanning
rgrover1 710:b2e1a2660ec2 729 * Set to True if active-scanning is required. This is used to fetch the
rgrover1 710:b2e1a2660ec2 730 * scan response from a peer if possible.
rgrover1 710:b2e1a2660ec2 731 *
rgrover1 710:b2e1a2660ec2 732 * The scanning window divided by the interval determines the duty cycle for
rgrover1 710:b2e1a2660ec2 733 * scanning. For example, if the interval is 100ms and the window is 10ms,
rgrover1 710:b2e1a2660ec2 734 * then the controller will scan for 10 percent of the time. It is possible
rgrover1 710:b2e1a2660ec2 735 * to have the interval and window set to the same value. In this case,
rgrover1 710:b2e1a2660ec2 736 * scanning is continuous, with a change of scanning frequency once every
rgrover1 710:b2e1a2660ec2 737 * interval.
rgrover1 710:b2e1a2660ec2 738 *
rgrover1 710:b2e1a2660ec2 739 * Once the scanning parameters have been configured, scanning can be
rgrover1 710:b2e1a2660ec2 740 * enabled by using startScan().
rgrover1 710:b2e1a2660ec2 741 *
rgrover1 710:b2e1a2660ec2 742 * @Note: The scan interval and window are recommendations to the BLE stack.
rgrover1 710:b2e1a2660ec2 743 */
rgrover1 710:b2e1a2660ec2 744 ble_error_t setScanParams(uint16_t interval = GapScanningParams::SCAN_INTERVAL_MAX,
rgrover1 710:b2e1a2660ec2 745 uint16_t window = GapScanningParams::SCAN_WINDOW_MAX,
rgrover1 710:b2e1a2660ec2 746 uint16_t timeout = 0,
rgrover1 710:b2e1a2660ec2 747 bool activeScanning = false) {
rgrover1 710:b2e1a2660ec2 748 ble_error_t rc;
rgrover1 710:b2e1a2660ec2 749 if (((rc = _scanningParams.setInterval(interval)) == BLE_ERROR_NONE) &&
rgrover1 710:b2e1a2660ec2 750 ((rc = _scanningParams.setWindow(window)) == BLE_ERROR_NONE) &&
rgrover1 710:b2e1a2660ec2 751 ((rc = _scanningParams.setTimeout(timeout)) == BLE_ERROR_NONE)) {
rgrover1 710:b2e1a2660ec2 752 _scanningParams.setActiveScanning(activeScanning);
rgrover1 710:b2e1a2660ec2 753 return BLE_ERROR_NONE;
rgrover1 710:b2e1a2660ec2 754 }
rgrover1 710:b2e1a2660ec2 755
rgrover1 710:b2e1a2660ec2 756 return rc;
rgrover1 710:b2e1a2660ec2 757 }
rgrover1 710:b2e1a2660ec2 758
rgrover1 710:b2e1a2660ec2 759 /**
vcoubard 1048:efb29faf12fc 760 * Set up the scanInterval parameter for GAP scanning (observer mode).
rgrover1 710:b2e1a2660ec2 761 * @param[in] interval
rgrover1 710:b2e1a2660ec2 762 * Scan interval (in milliseconds) [valid values lie between 2.5ms and 10.24s].
rgrover1 710:b2e1a2660ec2 763 *
rgrover1 710:b2e1a2660ec2 764 * The scanning window divided by the interval determines the duty cycle for
rgrover1 710:b2e1a2660ec2 765 * scanning. For example, if the interval is 100ms and the window is 10ms,
rgrover1 710:b2e1a2660ec2 766 * then the controller will scan for 10 percent of the time. It is possible
rgrover1 710:b2e1a2660ec2 767 * to have the interval and window set to the same value. In this case,
rgrover1 710:b2e1a2660ec2 768 * scanning is continuous, with a change of scanning frequency once every
rgrover1 710:b2e1a2660ec2 769 * interval.
rgrover1 710:b2e1a2660ec2 770 *
rgrover1 710:b2e1a2660ec2 771 * Once the scanning parameters have been configured, scanning can be
rgrover1 710:b2e1a2660ec2 772 * enabled by using startScan().
rgrover1 710:b2e1a2660ec2 773 */
rgrover1 710:b2e1a2660ec2 774 ble_error_t setScanInterval(uint16_t interval) {
rgrover1 710:b2e1a2660ec2 775 return _scanningParams.setInterval(interval);
rgrover1 710:b2e1a2660ec2 776 }
rgrover1 710:b2e1a2660ec2 777
rgrover1 710:b2e1a2660ec2 778 /**
vcoubard 1048:efb29faf12fc 779 * Set up the scanWindow parameter for GAP scanning (observer mode).
rgrover1 710:b2e1a2660ec2 780 * @param[in] window
rgrover1 710:b2e1a2660ec2 781 * Scan Window (in milliseconds) [valid values lie between 2.5ms and 10.24s].
rgrover1 710:b2e1a2660ec2 782 *
rgrover1 710:b2e1a2660ec2 783 * The scanning window divided by the interval determines the duty cycle for
rgrover1 710:b2e1a2660ec2 784 * scanning. For example, if the interval is 100ms and the window is 10ms,
rgrover1 710:b2e1a2660ec2 785 * then the controller will scan for 10 percent of the time. It is possible
rgrover1 710:b2e1a2660ec2 786 * to have the interval and window set to the same value. In this case,
rgrover1 710:b2e1a2660ec2 787 * scanning is continuous, with a change of scanning frequency once every
rgrover1 710:b2e1a2660ec2 788 * interval.
rgrover1 710:b2e1a2660ec2 789 *
rgrover1 710:b2e1a2660ec2 790 * Once the scanning parameters have been configured, scanning can be
rgrover1 710:b2e1a2660ec2 791 * enabled by using startScan().
rgrover1 770:079b714e9c1a 792 *
rgrover1 770:079b714e9c1a 793 * If scanning is already active, the updated value of scanWindow will be
rgrover1 770:079b714e9c1a 794 * propagated to the underlying BLE stack.
rgrover1 710:b2e1a2660ec2 795 */
rgrover1 710:b2e1a2660ec2 796 ble_error_t setScanWindow(uint16_t window) {
rgrover1 770:079b714e9c1a 797 ble_error_t rc;
rgrover1 770:079b714e9c1a 798 if ((rc = _scanningParams.setWindow(window)) != BLE_ERROR_NONE) {
rgrover1 770:079b714e9c1a 799 return rc;
rgrover1 770:079b714e9c1a 800 }
rgrover1 770:079b714e9c1a 801
rgrover1 770:079b714e9c1a 802 /* If scanning is already active, propagate the new setting to the stack. */
rgrover1 770:079b714e9c1a 803 if (scanningActive) {
rgrover1 770:079b714e9c1a 804 return startRadioScan(_scanningParams);
rgrover1 770:079b714e9c1a 805 }
rgrover1 770:079b714e9c1a 806
rgrover1 770:079b714e9c1a 807 return BLE_ERROR_NONE;
rgrover1 710:b2e1a2660ec2 808 }
rgrover1 710:b2e1a2660ec2 809
rgrover1 710:b2e1a2660ec2 810 /**
vcoubard 1048:efb29faf12fc 811 * Set up parameters for GAP scanning (observer mode).
rgrover1 710:b2e1a2660ec2 812 * @param[in] timeout
vcoubard 1048:efb29faf12fc 813 * Scan timeout (in seconds) between 0x0001 and 0xFFFF; 0x0000 disables the timeout.
rgrover1 710:b2e1a2660ec2 814 *
rgrover1 710:b2e1a2660ec2 815 * Once the scanning parameters have been configured, scanning can be
rgrover1 710:b2e1a2660ec2 816 * enabled by using startScan().
rgrover1 770:079b714e9c1a 817 *
rgrover1 770:079b714e9c1a 818 * If scanning is already active, the updated value of scanTimeout will be
rgrover1 770:079b714e9c1a 819 * propagated to the underlying BLE stack.
rgrover1 710:b2e1a2660ec2 820 */
rgrover1 710:b2e1a2660ec2 821 ble_error_t setScanTimeout(uint16_t timeout) {
rgrover1 770:079b714e9c1a 822 ble_error_t rc;
rgrover1 770:079b714e9c1a 823 if ((rc = _scanningParams.setTimeout(timeout)) != BLE_ERROR_NONE) {
rgrover1 770:079b714e9c1a 824 return rc;
rgrover1 770:079b714e9c1a 825 }
rgrover1 770:079b714e9c1a 826
rgrover1 770:079b714e9c1a 827 /* If scanning is already active, propagate the new settings to the stack. */
rgrover1 770:079b714e9c1a 828 if (scanningActive) {
rgrover1 770:079b714e9c1a 829 return startRadioScan(_scanningParams);
rgrover1 770:079b714e9c1a 830 }
rgrover1 770:079b714e9c1a 831
rgrover1 770:079b714e9c1a 832 return BLE_ERROR_NONE;
rgrover1 710:b2e1a2660ec2 833 }
rgrover1 710:b2e1a2660ec2 834
rgrover1 710:b2e1a2660ec2 835 /**
vcoubard 1048:efb29faf12fc 836 * Set up parameters for GAP scanning (observer mode).
rgrover1 710:b2e1a2660ec2 837 * @param[in] activeScanning
rgrover1 710:b2e1a2660ec2 838 * Set to True if active-scanning is required. This is used to fetch the
rgrover1 710:b2e1a2660ec2 839 * scan response from a peer if possible.
rgrover1 710:b2e1a2660ec2 840 *
rgrover1 710:b2e1a2660ec2 841 * Once the scanning parameters have been configured, scanning can be
rgrover1 710:b2e1a2660ec2 842 * enabled by using startScan().
rgrover1 770:079b714e9c1a 843 *
rgrover1 770:079b714e9c1a 844 * If scanning is already in progress, then active-scanning will be enabled
rgrover1 770:079b714e9c1a 845 * for the underlying BLE stack.
rgrover1 710:b2e1a2660ec2 846 */
rgrover1 770:079b714e9c1a 847 ble_error_t setActiveScanning(bool activeScanning) {
rgrover1 710:b2e1a2660ec2 848 _scanningParams.setActiveScanning(activeScanning);
rgrover1 770:079b714e9c1a 849
rgrover1 770:079b714e9c1a 850 /* If scanning is already active, propagate the new settings to the stack. */
rgrover1 770:079b714e9c1a 851 if (scanningActive) {
rgrover1 770:079b714e9c1a 852 return startRadioScan(_scanningParams);
rgrover1 770:079b714e9c1a 853 }
rgrover1 770:079b714e9c1a 854
rgrover1 770:079b714e9c1a 855 return BLE_ERROR_NONE;
rgrover1 710:b2e1a2660ec2 856 }
rgrover1 710:b2e1a2660ec2 857
rgrover1 710:b2e1a2660ec2 858 /**
rgrover1 710:b2e1a2660ec2 859 * Start scanning (Observer Procedure) based on the parameters currently in
rgrover1 710:b2e1a2660ec2 860 * effect.
rgrover1 710:b2e1a2660ec2 861 *
rgrover1 710:b2e1a2660ec2 862 * @param[in] callback
vcoubard 1048:efb29faf12fc 863 * The application-specific callback to be invoked upon
rgrover1 710:b2e1a2660ec2 864 * receiving every advertisement report. This can be passed in
rgrover1 710:b2e1a2660ec2 865 * as NULL, in which case scanning may not be enabled at all.
rgrover1 710:b2e1a2660ec2 866 */
rgrover1 710:b2e1a2660ec2 867 ble_error_t startScan(void (*callback)(const AdvertisementCallbackParams_t *params)) {
rgrover1 710:b2e1a2660ec2 868 ble_error_t err = BLE_ERROR_NONE;
rgrover1 710:b2e1a2660ec2 869 if (callback) {
rgrover1 710:b2e1a2660ec2 870 if ((err = startRadioScan(_scanningParams)) == BLE_ERROR_NONE) {
rgrover1 770:079b714e9c1a 871 scanningActive = true;
rgrover1 710:b2e1a2660ec2 872 onAdvertisementReport.attach(callback);
rgrover1 710:b2e1a2660ec2 873 }
rgrover1 710:b2e1a2660ec2 874 }
rgrover1 710:b2e1a2660ec2 875
rgrover1 710:b2e1a2660ec2 876 return err;
rgrover1 710:b2e1a2660ec2 877 }
rgrover1 710:b2e1a2660ec2 878
rgrover1 710:b2e1a2660ec2 879 /**
rgrover1 710:b2e1a2660ec2 880 * Same as above, but this takes an (object, method) pair for a callback.
rgrover1 710:b2e1a2660ec2 881 */
rgrover1 710:b2e1a2660ec2 882 template<typename T>
rgrover1 710:b2e1a2660ec2 883 ble_error_t startScan(T *object, void (T::*callbackMember)(const AdvertisementCallbackParams_t *params)) {
rgrover1 710:b2e1a2660ec2 884 ble_error_t err = BLE_ERROR_NONE;
rgrover1 710:b2e1a2660ec2 885 if (object && callbackMember) {
rgrover1 710:b2e1a2660ec2 886 if ((err = startRadioScan(_scanningParams)) == BLE_ERROR_NONE) {
rgrover1 770:079b714e9c1a 887 scanningActive = true;
rgrover1 710:b2e1a2660ec2 888 onAdvertisementReport.attach(object, callbackMember);
rgrover1 710:b2e1a2660ec2 889 }
rgrover1 710:b2e1a2660ec2 890 }
rgrover1 710:b2e1a2660ec2 891
rgrover1 710:b2e1a2660ec2 892 return err;
rgrover1 710:b2e1a2660ec2 893 }
rgrover1 710:b2e1a2660ec2 894
rgrover1 753:0f60274cd3ad 895 /**
rgrover1 753:0f60274cd3ad 896 * Initialize radio-notification events to be generated from the stack.
vcoubard 1048:efb29faf12fc 897 * This API doesn't need to be called directly.
rgrover1 753:0f60274cd3ad 898 *
rgrover1 753:0f60274cd3ad 899 * Radio Notification is a feature that enables ACTIVE and INACTIVE
rgrover1 753:0f60274cd3ad 900 * (nACTIVE) signals from the stack that notify the application when the
rgrover1 753:0f60274cd3ad 901 * radio is in use.
rgrover1 753:0f60274cd3ad 902 *
vcoubard 1048:efb29faf12fc 903 * The ACTIVE signal is sent before the radio event starts. The nACTIVE
vcoubard 1048:efb29faf12fc 904 * signal is sent at the end of the radio event. These signals can be used
rgrover1 753:0f60274cd3ad 905 * by the application programmer to synchronize application logic with radio
rgrover1 753:0f60274cd3ad 906 * activity. For example, the ACTIVE signal can be used to shut off external
vcoubard 1048:efb29faf12fc 907 * devices, to manage peak current drawn during periods when the radio is on,
rgrover1 753:0f60274cd3ad 908 * or to trigger sensor data collection for transmission in the Radio Event.
rgrover1 753:0f60274cd3ad 909 *
rgrover1 753:0f60274cd3ad 910 * @return BLE_ERROR_NONE on successful initialization, otherwise an error code.
rgrover1 753:0f60274cd3ad 911 */
rgrover1 753:0f60274cd3ad 912 virtual ble_error_t initRadioNotification(void) {
rgrover1 753:0f60274cd3ad 913 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 753:0f60274cd3ad 914 }
rgrover1 753:0f60274cd3ad 915
rgrover1 710:b2e1a2660ec2 916 private:
rgrover1 710:b2e1a2660ec2 917 ble_error_t setAdvertisingData(void) {
rgrover1 710:b2e1a2660ec2 918 return setAdvertisingData(_advPayload, _scanResponse);
rgrover1 710:b2e1a2660ec2 919 }
rgrover1 710:b2e1a2660ec2 920
rgrover1 710:b2e1a2660ec2 921 private:
rgrover1 896:791741895cd8 922 virtual ble_error_t setAdvertisingData(const GapAdvertisingData &advData, const GapAdvertisingData &scanResponse) = 0;
rgrover1 896:791741895cd8 923 virtual ble_error_t startAdvertising(const GapAdvertisingParams &) = 0;
rgrover1 710:b2e1a2660ec2 924
rgrover1 710:b2e1a2660ec2 925 public:
rgrover1 710:b2e1a2660ec2 926 /**
rgrover1 710:b2e1a2660ec2 927 * Accessors to read back currently active advertising params.
rgrover1 710:b2e1a2660ec2 928 */
rgrover1 710:b2e1a2660ec2 929 GapAdvertisingParams &getAdvertisingParams(void) {
rgrover1 710:b2e1a2660ec2 930 return _advParams;
rgrover1 710:b2e1a2660ec2 931 }
rgrover1 710:b2e1a2660ec2 932 const GapAdvertisingParams &getAdvertisingParams(void) const {
rgrover1 710:b2e1a2660ec2 933 return _advParams;
rgrover1 710:b2e1a2660ec2 934 }
rgrover1 710:b2e1a2660ec2 935
rgrover1 710:b2e1a2660ec2 936 /**
vcoubard 1048:efb29faf12fc 937 * Set up a particular, user-constructed set of advertisement parameters for
rgrover1 710:b2e1a2660ec2 938 * the underlying stack. It would be uncommon for this API to be used
rgrover1 710:b2e1a2660ec2 939 * directly; there are other APIs to tweak advertisement parameters
rgrover1 710:b2e1a2660ec2 940 * individually.
rgrover1 710:b2e1a2660ec2 941 */
rgrover1 710:b2e1a2660ec2 942 void setAdvertisingParams(const GapAdvertisingParams &newParams) {
rgrover1 710:b2e1a2660ec2 943 _advParams = newParams;
rgrover1 710:b2e1a2660ec2 944 }
rgrover1 710:b2e1a2660ec2 945
rgrover1 710:b2e1a2660ec2 946 /* Event callback handlers. */
rgrover1 710:b2e1a2660ec2 947 public:
rgrover1 710:b2e1a2660ec2 948 /**
vcoubard 1048:efb29faf12fc 949 * Set up a callback for timeout events. Refer to TimeoutSource_t for
rgrover1 710:b2e1a2660ec2 950 * possible event types.
vcoubard 1052:b55e1ad3e1b3 951 * @note It is possible to unregister callbacks using onTimeout().detach(callback)
rgrover1 710:b2e1a2660ec2 952 */
vcoubard 1052:b55e1ad3e1b3 953 void onTimeout(TimeoutEventCallback_t callback) {
vcoubard 1052:b55e1ad3e1b3 954 timeoutCallbackChain.add(callback);
vcoubard 1052:b55e1ad3e1b3 955 }
vcoubard 1052:b55e1ad3e1b3 956
vcoubard 1052:b55e1ad3e1b3 957 /**
vcoubard 1052:b55e1ad3e1b3 958 * @brief provide access to the callchain of timeout event callbacks
vcoubard 1052:b55e1ad3e1b3 959 * It is possible to register callbacks using onTimeout().add(callback);
vcoubard 1054:f59e5d9a992a 960 * It is possible to unregister callbacks using onTimeout().detach(callback)
vcoubard 1052:b55e1ad3e1b3 961 * @return The timeout event callbacks chain
vcoubard 1052:b55e1ad3e1b3 962 */
vcoubard 1052:b55e1ad3e1b3 963 TimeoutEventCallbackChain_t& onTimeout() {
vcoubard 1052:b55e1ad3e1b3 964 return timeoutCallbackChain;
vcoubard 1052:b55e1ad3e1b3 965 }
rgrover1 710:b2e1a2660ec2 966
rgrover1 710:b2e1a2660ec2 967 /**
rgrover1 829:9072de50087b 968 * Append to a chain of callbacks to be invoked upon GAP connection.
vcoubard 1052:b55e1ad3e1b3 969 * @note It is possible to unregister callbacks using onConnection().detach(callback)
rgrover1 710:b2e1a2660ec2 970 */
rgrover1 829:9072de50087b 971 void onConnection(ConnectionEventCallback_t callback) {connectionCallChain.add(callback);}
rgrover1 710:b2e1a2660ec2 972
rgrover1 829:9072de50087b 973 template<typename T>
rgrover1 829:9072de50087b 974 void onConnection(T *tptr, void (T::*mptr)(const ConnectionCallbackParams_t*)) {connectionCallChain.add(tptr, mptr);}
rgrover1 710:b2e1a2660ec2 975
rgrover1 710:b2e1a2660ec2 976 /**
vcoubard 1052:b55e1ad3e1b3 977 * @brief provide access to the callchain of connection event callbacks
vcoubard 1052:b55e1ad3e1b3 978 * It is possible to register callbacks using onConnection().add(callback);
vcoubard 1054:f59e5d9a992a 979 * It is possible to unregister callbacks using onConnection().detach(callback)
vcoubard 1052:b55e1ad3e1b3 980 * @return The connection event callbacks chain
vcoubard 1052:b55e1ad3e1b3 981 */
vcoubard 1054:f59e5d9a992a 982 ConnectionEventCallbackChain_t& onConnection() {
vcoubard 1052:b55e1ad3e1b3 983 return connectionCallChain;
vcoubard 1052:b55e1ad3e1b3 984 }
vcoubard 1052:b55e1ad3e1b3 985
vcoubard 1052:b55e1ad3e1b3 986 /**
rgrover1 829:9072de50087b 987 * Append to a chain of callbacks to be invoked upon GAP disconnection.
vcoubard 1052:b55e1ad3e1b3 988 * @note It is possible to unregister callbacks using onDisconnection().detach(callback)
rgrover1 816:2b4f0ef8c06e 989 */
rgrover1 829:9072de50087b 990 void onDisconnection(DisconnectionEventCallback_t callback) {disconnectionCallChain.add(callback);}
rgrover1 816:2b4f0ef8c06e 991
rgrover1 710:b2e1a2660ec2 992 template<typename T>
rgrover1 829:9072de50087b 993 void onDisconnection(T *tptr, void (T::*mptr)(const DisconnectionCallbackParams_t*)) {disconnectionCallChain.add(tptr, mptr);}
rgrover1 710:b2e1a2660ec2 994
rgrover1 710:b2e1a2660ec2 995 /**
vcoubard 1052:b55e1ad3e1b3 996 * @brief provide access to the callchain of disconnection event callbacks
vcoubard 1052:b55e1ad3e1b3 997 * It is possible to register callbacks using onDisconnection().add(callback);
vcoubard 1054:f59e5d9a992a 998 * It is possible to unregister callbacks using onDisconnection().detach(callback)
vcoubard 1052:b55e1ad3e1b3 999 * @return The disconnection event callbacks chain
vcoubard 1052:b55e1ad3e1b3 1000 */
vcoubard 1052:b55e1ad3e1b3 1001 DisconnectionEventCallbackChain_t& onDisconnection() {
vcoubard 1052:b55e1ad3e1b3 1002 return disconnectionCallChain;
vcoubard 1052:b55e1ad3e1b3 1003 }
vcoubard 1052:b55e1ad3e1b3 1004
vcoubard 1052:b55e1ad3e1b3 1005 /**
rgrover1 710:b2e1a2660ec2 1006 * Set the application callback for radio-notification events.
rgrover1 710:b2e1a2660ec2 1007 *
rgrover1 710:b2e1a2660ec2 1008 * Radio Notification is a feature that enables ACTIVE and INACTIVE
rgrover1 710:b2e1a2660ec2 1009 * (nACTIVE) signals from the stack that notify the application when the
rgrover1 753:0f60274cd3ad 1010 * radio is in use.
rgrover1 710:b2e1a2660ec2 1011 *
vcoubard 1048:efb29faf12fc 1012 * The ACTIVE signal is sent before the radio event starts. The nACTIVE
vcoubard 1048:efb29faf12fc 1013 * signal is sent at the end of the radio event. These signals can be used
rgrover1 710:b2e1a2660ec2 1014 * by the application programmer to synchronize application logic with radio
rgrover1 710:b2e1a2660ec2 1015 * activity. For example, the ACTIVE signal can be used to shut off external
vcoubard 1048:efb29faf12fc 1016 * devices, to manage peak current drawn during periods when the radio is on,
rgrover1 710:b2e1a2660ec2 1017 * or to trigger sensor data collection for transmission in the Radio Event.
rgrover1 710:b2e1a2660ec2 1018 *
rgrover1 710:b2e1a2660ec2 1019 * @param callback
rgrover1 710:b2e1a2660ec2 1020 * The application handler to be invoked in response to a radio
rgrover1 710:b2e1a2660ec2 1021 * ACTIVE/INACTIVE event.
rgrover1 754:9b391fb5c5d7 1022 *
vcoubard 1048:efb29faf12fc 1023 * Or in the other version:
rgrover1 754:9b391fb5c5d7 1024 *
rgrover1 754:9b391fb5c5d7 1025 * @param tptr
rgrover1 754:9b391fb5c5d7 1026 * Pointer to the object of a class defining the member callback
rgrover1 754:9b391fb5c5d7 1027 * function (mptr).
rgrover1 754:9b391fb5c5d7 1028 * @param mptr
rgrover1 754:9b391fb5c5d7 1029 * The member callback (within the context of an object) to be
rgrover1 754:9b391fb5c5d7 1030 * invoked in response to a radio ACTIVE/INACTIVE event.
rgrover1 710:b2e1a2660ec2 1031 */
rgrover1 753:0f60274cd3ad 1032 void onRadioNotification(void (*callback)(bool param)) {
rgrover1 753:0f60274cd3ad 1033 radioNotificationCallback.attach(callback);
rgrover1 753:0f60274cd3ad 1034 }
rgrover1 753:0f60274cd3ad 1035 template <typename T>
rgrover1 753:0f60274cd3ad 1036 void onRadioNotification(T *tptr, void (T::*mptr)(bool)) {
rgrover1 753:0f60274cd3ad 1037 radioNotificationCallback.attach(tptr, mptr);
rgrover1 753:0f60274cd3ad 1038 }
rgrover1 710:b2e1a2660ec2 1039
vcoubard 1090:148d8b9b56a5 1040 /**
vcoubard 1090:148d8b9b56a5 1041 * Setup a callback to be invoked to notify the user application that the
vcoubard 1090:148d8b9b56a5 1042 * Gap instance is about to shutdown (possibly as a result of a call
vcoubard 1090:148d8b9b56a5 1043 * to BLE::shutdown()).
vcoubard 1090:148d8b9b56a5 1044 *
vcoubard 1090:148d8b9b56a5 1045 * @Note: It is possible to chain together multiple onShutdown callbacks
vcoubard 1090:148d8b9b56a5 1046 * (potentially from different modules of an application) to be notified
vcoubard 1090:148d8b9b56a5 1047 * before the Gap instance is shutdown.
vcoubard 1090:148d8b9b56a5 1048 *
vcoubard 1090:148d8b9b56a5 1049 * @Note: It is also possible to set up a callback into a member function of
vcoubard 1090:148d8b9b56a5 1050 * some object.
vcoubard 1090:148d8b9b56a5 1051 *
vcoubard 1090:148d8b9b56a5 1052 * @Note It is possible to unregister a callback using onShutdown().detach(callback)
vcoubard 1090:148d8b9b56a5 1053 */
vcoubard 1090:148d8b9b56a5 1054 void onShutdown(const GapShutdownCallback_t& callback) {
vcoubard 1090:148d8b9b56a5 1055 shutdownCallChain.add(callback);
vcoubard 1090:148d8b9b56a5 1056 }
vcoubard 1090:148d8b9b56a5 1057 template <typename T>
vcoubard 1090:148d8b9b56a5 1058 void onShutdown(T *objPtr, void (T::*memberPtr)(void)) {
vcoubard 1090:148d8b9b56a5 1059 shutdownCallChain.add(objPtr, memberPtr);
vcoubard 1090:148d8b9b56a5 1060 }
vcoubard 1090:148d8b9b56a5 1061
vcoubard 1090:148d8b9b56a5 1062 /**
vcoubard 1090:148d8b9b56a5 1063 * @brief provide access to the callchain of shutdown event callbacks
vcoubard 1090:148d8b9b56a5 1064 * It is possible to register callbacks using onShutdown().add(callback);
vcoubard 1090:148d8b9b56a5 1065 * It is possible to unregister callbacks using onShutdown().detach(callback)
vcoubard 1090:148d8b9b56a5 1066 * @return The shutdown event callbacks chain
vcoubard 1090:148d8b9b56a5 1067 */
vcoubard 1090:148d8b9b56a5 1068 GapShutdownCallbackChain_t& onShutdown() {
vcoubard 1090:148d8b9b56a5 1069 return shutdownCallChain;
vcoubard 1090:148d8b9b56a5 1070 }
vcoubard 1090:148d8b9b56a5 1071
vcoubard 1082:127667021827 1072 public:
vcoubard 1082:127667021827 1073 /**
vcoubard 1090:148d8b9b56a5 1074 * Notify all registered onShutdown callbacks that the Gap instance is
vcoubard 1090:148d8b9b56a5 1075 * about to be shutdown and clear all Gap state of the
vcoubard 1090:148d8b9b56a5 1076 * associated object.
vcoubard 1082:127667021827 1077 *
vcoubard 1082:127667021827 1078 * This function is meant to be overridden in the platform-specific
vcoubard 1082:127667021827 1079 * sub-class. Nevertheless, the sub-class is only expected to reset its
vcoubard 1082:127667021827 1080 * state and not the data held in Gap members. This shall be achieved by a
vcoubard 1082:127667021827 1081 * call to Gap::reset() from the sub-class' reset() implementation.
vcoubard 1082:127667021827 1082 *
vcoubard 1082:127667021827 1083 * @return BLE_ERROR_NONE on success.
vcoubard 1082:127667021827 1084 *
vcoubard 1082:127667021827 1085 * @note: Currently a call to reset() does not reset the advertising and
vcoubard 1082:127667021827 1086 * scan parameters to default values.
vcoubard 1082:127667021827 1087 */
vcoubard 1082:127667021827 1088 virtual ble_error_t reset(void) {
vcoubard 1090:148d8b9b56a5 1089 /* Notify that the instance is about to shutdown */
vcoubard 1090:148d8b9b56a5 1090 shutdownCallChain.call(this);
vcoubard 1090:148d8b9b56a5 1091 shutdownCallChain.clear();
vcoubard 1090:148d8b9b56a5 1092
vcoubard 1082:127667021827 1093 /* Clear Gap state */
vcoubard 1082:127667021827 1094 state.advertising = 0;
vcoubard 1084:40c1e518d6de 1095 state.connected = 0;
vcoubard 1082:127667021827 1096
vcoubard 1082:127667021827 1097 /* Clear scanning state */
vcoubard 1082:127667021827 1098 scanningActive = false;
vcoubard 1082:127667021827 1099
vcoubard 1082:127667021827 1100 /* Clear advertising and scanning data */
vcoubard 1082:127667021827 1101 _advPayload.clear();
vcoubard 1082:127667021827 1102 _scanResponse.clear();
vcoubard 1082:127667021827 1103
vcoubard 1082:127667021827 1104 /* Clear callbacks */
vcoubard 1082:127667021827 1105 timeoutCallbackChain.clear();
vcoubard 1082:127667021827 1106 connectionCallChain.clear();
vcoubard 1082:127667021827 1107 disconnectionCallChain.clear();
vcoubard 1082:127667021827 1108 radioNotificationCallback = NULL;
vcoubard 1084:40c1e518d6de 1109 onAdvertisementReport = NULL;
vcoubard 1082:127667021827 1110
vcoubard 1082:127667021827 1111 return BLE_ERROR_NONE;
vcoubard 1082:127667021827 1112 }
vcoubard 1082:127667021827 1113
rgrover1 710:b2e1a2660ec2 1114 protected:
rgrover1 710:b2e1a2660ec2 1115 Gap() :
rgrover1 710:b2e1a2660ec2 1116 _advParams(),
rgrover1 710:b2e1a2660ec2 1117 _advPayload(),
rgrover1 710:b2e1a2660ec2 1118 _scanningParams(),
rgrover1 710:b2e1a2660ec2 1119 _scanResponse(),
rgrover1 710:b2e1a2660ec2 1120 state(),
rgrover1 770:079b714e9c1a 1121 scanningActive(false),
vcoubard 1052:b55e1ad3e1b3 1122 timeoutCallbackChain(),
rgrover1 710:b2e1a2660ec2 1123 radioNotificationCallback(),
rgrover1 710:b2e1a2660ec2 1124 onAdvertisementReport(),
rgrover1 816:2b4f0ef8c06e 1125 connectionCallChain(),
rgrover1 710:b2e1a2660ec2 1126 disconnectionCallChain() {
rgrover1 710:b2e1a2660ec2 1127 _advPayload.clear();
rgrover1 710:b2e1a2660ec2 1128 _scanResponse.clear();
rgrover1 710:b2e1a2660ec2 1129 }
rgrover1 710:b2e1a2660ec2 1130
rgrover1 710:b2e1a2660ec2 1131 /* Entry points for the underlying stack to report events back to the user. */
rgrover1 710:b2e1a2660ec2 1132 public:
vcoubard 1079:6e2d9514f3df 1133 void processConnectionEvent(Handle_t handle,
vcoubard 1079:6e2d9514f3df 1134 Role_t role,
vcoubard 1079:6e2d9514f3df 1135 BLEProtocol::AddressType_t peerAddrType,
vcoubard 1079:6e2d9514f3df 1136 const BLEProtocol::Address_t peerAddr,
vcoubard 1079:6e2d9514f3df 1137 BLEProtocol::AddressType_t ownAddrType,
vcoubard 1079:6e2d9514f3df 1138 const BLEProtocol::Address_t ownAddr,
vcoubard 1079:6e2d9514f3df 1139 const ConnectionParams_t *connectionParams) {
rgrover1 710:b2e1a2660ec2 1140 state.connected = 1;
rgrover1 829:9072de50087b 1141 ConnectionCallbackParams_t callbackParams(handle, role, peerAddrType, peerAddr, ownAddrType, ownAddr, connectionParams);
rgrover1 829:9072de50087b 1142 connectionCallChain.call(&callbackParams);
rgrover1 710:b2e1a2660ec2 1143 }
rgrover1 710:b2e1a2660ec2 1144
rgrover1 710:b2e1a2660ec2 1145 void processDisconnectionEvent(Handle_t handle, DisconnectionReason_t reason) {
rgrover1 710:b2e1a2660ec2 1146 state.connected = 0;
rgrover1 829:9072de50087b 1147 DisconnectionCallbackParams_t callbackParams(handle, reason);
rgrover1 829:9072de50087b 1148 disconnectionCallChain.call(&callbackParams);
rgrover1 710:b2e1a2660ec2 1149 }
rgrover1 710:b2e1a2660ec2 1150
vcoubard 1079:6e2d9514f3df 1151 void processAdvertisementReport(const BLEProtocol::Address_t peerAddr,
vcoubard 1079:6e2d9514f3df 1152 int8_t rssi,
vcoubard 1079:6e2d9514f3df 1153 bool isScanResponse,
rgrover1 710:b2e1a2660ec2 1154 GapAdvertisingParams::AdvertisingType_t type,
vcoubard 1079:6e2d9514f3df 1155 uint8_t advertisingDataLen,
vcoubard 1079:6e2d9514f3df 1156 const uint8_t *advertisingData) {
rgrover1 710:b2e1a2660ec2 1157 AdvertisementCallbackParams_t params;
rgrover1 710:b2e1a2660ec2 1158 memcpy(params.peerAddr, peerAddr, ADDR_LEN);
rgrover1 710:b2e1a2660ec2 1159 params.rssi = rssi;
rgrover1 710:b2e1a2660ec2 1160 params.isScanResponse = isScanResponse;
rgrover1 710:b2e1a2660ec2 1161 params.type = type;
rgrover1 710:b2e1a2660ec2 1162 params.advertisingDataLen = advertisingDataLen;
rgrover1 710:b2e1a2660ec2 1163 params.advertisingData = advertisingData;
rgrover1 710:b2e1a2660ec2 1164 onAdvertisementReport.call(&params);
rgrover1 710:b2e1a2660ec2 1165 }
rgrover1 710:b2e1a2660ec2 1166
rgrover1 710:b2e1a2660ec2 1167 void processTimeoutEvent(TimeoutSource_t source) {
vcoubard 1052:b55e1ad3e1b3 1168 if (timeoutCallbackChain) {
vcoubard 1052:b55e1ad3e1b3 1169 timeoutCallbackChain(source);
rgrover1 710:b2e1a2660ec2 1170 }
rgrover1 710:b2e1a2660ec2 1171 }
rgrover1 710:b2e1a2660ec2 1172
rgrover1 710:b2e1a2660ec2 1173 protected:
rgrover1 710:b2e1a2660ec2 1174 GapAdvertisingParams _advParams;
rgrover1 710:b2e1a2660ec2 1175 GapAdvertisingData _advPayload;
rgrover1 710:b2e1a2660ec2 1176 GapScanningParams _scanningParams;
rgrover1 710:b2e1a2660ec2 1177 GapAdvertisingData _scanResponse;
rgrover1 710:b2e1a2660ec2 1178
rgrover1 710:b2e1a2660ec2 1179 GapState_t state;
rgrover1 770:079b714e9c1a 1180 bool scanningActive;
rgrover1 710:b2e1a2660ec2 1181
rgrover1 710:b2e1a2660ec2 1182 protected:
vcoubard 1052:b55e1ad3e1b3 1183 TimeoutEventCallbackChain_t timeoutCallbackChain;
vcoubard 1052:b55e1ad3e1b3 1184 RadioNotificationEventCallback_t radioNotificationCallback;
vcoubard 1052:b55e1ad3e1b3 1185 AdvertisementReportCallback_t onAdvertisementReport;
vcoubard 1052:b55e1ad3e1b3 1186 ConnectionEventCallbackChain_t connectionCallChain;
vcoubard 1052:b55e1ad3e1b3 1187 DisconnectionEventCallbackChain_t disconnectionCallChain;
rgrover1 710:b2e1a2660ec2 1188
rgrover1 710:b2e1a2660ec2 1189 private:
vcoubard 1090:148d8b9b56a5 1190 GapShutdownCallbackChain_t shutdownCallChain;
vcoubard 1090:148d8b9b56a5 1191
vcoubard 1090:148d8b9b56a5 1192 private:
vcoubard 1048:efb29faf12fc 1193 /* Disallow copy and assignment. */
rgrover1 710:b2e1a2660ec2 1194 Gap(const Gap &);
rgrover1 710:b2e1a2660ec2 1195 Gap& operator=(const Gap &);
rgrover1 710:b2e1a2660ec2 1196 };
rgrover1 710:b2e1a2660ec2 1197
rgrover1 710:b2e1a2660ec2 1198 #endif // ifndef __GAP_H__