Important changes to repositories hosted on mbed.com
Mbed hosted mercurial repositories are deprecated and are due to be permanently deleted in July 2026.
To keep a copy of this software download the repository Zip archive or clone locally using Mercurial.
It is also possible to export all your personal repositories from the account settings page.
History
made I2C-Sensors working in parallel, added rolling buffer for PID derivative, played with the PID and frequency parameters in main
2015-11-19, by maetugr [Thu, 19 Nov 2015 18:47:27 +0000] rev 8
made I2C-Sensors working in parallel, added rolling buffer for PID derivative, played with the PID and frequency parameters in main
Changed a lot of Timing related things; controll frequency is now regulated to 495Hz becuase this is the output frequency anyway
2015-09-14, by maetugr [Mon, 14 Sep 2015 12:49:08 +0000] rev 7
Changed a lot of Timing related things; controll frequency is now regulated to 495Hz becuase this is the output frequency anyway
new PID values from the first test outside with 4Ah 4s LiPo
2015-09-11, by maetugr [Fri, 11 Sep 2015 10:10:36 +0000] rev 6
new PID values from the first test outside with 4Ah 4s LiPo
level mode with 12" props pretty stable indoors; some very small wobles remaining
2015-09-11, by maetugr [Fri, 11 Sep 2015 08:43:35 +0000] rev 5
level mode with 12" props pretty stable indoors; some very small wobles remaining
acro mode and level mode work indoor on my bed; trying with battery outside tomorrow :)
2015-09-10, by maetugr [Thu, 10 Sep 2015 22:02:51 +0000] rev 4
acro mode and level mode work indoor on my bed; trying with battery outside tomorrow :)
test of auto leveling mode without battery on bed; try tuning madgwick now to rely more on gyro
2015-09-10, by maetugr [Thu, 10 Sep 2015 17:10:11 +0000] rev 3
test of auto leveling mode without battery on bed; try tuning madgwick now to rely more on gyro
some minor optimizations; before testing an angle controller
2015-09-10, by maetugr [Thu, 10 Sep 2015 12:06:04 +0000] rev 2
some minor optimizations; before testing an angle controller
Gyro P Controller on one axis tested; everything should work again
2015-09-09, by maetugr [Wed, 09 Sep 2015 09:58:41 +0000] rev 1
Gyro P Controller on one axis tested; everything should work again
MPU9250 on the new Board works fine over SPI; RC is broken and works with FlyBed2 :(
2015-09-08, by maetugr [Tue, 08 Sep 2015 13:38:10 +0000] rev 0
MPU9250 on the new Board works fine over SPI; RC is broken and works with FlyBed2 :(