Matthias Grob / Mbed 2 deprecated FlyBed1

NOT FINISHED YET!!! My first try to get a self built fully working Quadrocopter based on an mbed, a self built frame and some other more or less cheap parts.

Dependencies:   mbed MODI2C

main.cpp@36:128c55793728, 2013-06-12 (annotated)

Committer:
maetugr
Date:
Wed Jun 12 10:26:18 2013 +0000
Revision:
36:128c55793728
Parent:
35:2a9465fedb99
Child:
37:34917f7c10ae
after inserting MODI2C to get an undisturbed I2C-communication

Who changed what in which revision?

UserRevisionLine numberNew contents of line
maetugr 7:9d4313510646 1 #include "mbed.h" // Standard Library
maetugr 7:9d4313510646 2 #include "LED.h" // LEDs framework for blinking ;)
maetugr 13:4737ee9ebfee 3 #include "PC.h" // Serial Port via USB by Roland Elmiger for debugging with Terminal (driver needed: https://mbed.org/media/downloads/drivers/mbedWinSerial_16466.exe)
maetugr 7:9d4313510646 4 #include "L3G4200D.h" // Gyro (Gyroscope)
maetugr 7:9d4313510646 5 #include "ADXL345.h" // Acc (Accelerometer)
maetugr 7:9d4313510646 6 #include "HMC5883.h" // Comp (Compass)
maetugr 14:cf260677ecde 7 #include "BMP085_old.h" // Alt (Altitude sensor)
maetugr 30:021e13b62575 8 #include "RC_Channel.h" // RemoteControl Channels with PPM
maetugr 15:753c5d6a63b3 9 #include "Servo_PWM.h" // Motor PPM using PwmOut
maetugr 13:4737ee9ebfee 10 #include "PID.h" // PID Library by Aaron Berk
maetugr 26:96a072233d7a 11 #include "IMU_Filter.h" // Class to calculate position angles
maetugr 26:96a072233d7a 12 #include "Mixer.h" // Class to calculate motorspeeds from Angles, Regulation and RC-Signals
maetugr 0:0c4fafa398b4 13
maetugr 30:021e13b62575 14 #define RATE 0.002 // speed of the interrupt for Sensors and PID
maetugr 30:021e13b62575 15 #define PPM_FREQU 495 // Hz Frequency of PPM Signal for ESCs (maximum <500Hz)
maetugr 33:fd98776b6cc7 16 #define RC_SENSITIVITY 30 // maximal angle from horizontal that the PID is aming for
maetugr 36:128c55793728 17 #define YAWSPEED 0.2 // maximal speed of yaw rotation in degree per Rate
maetugr 15:753c5d6a63b3 18
maetugr 34:3aa1cbcde59d 19 // RC
maetugr 34:3aa1cbcde59d 20 #define AILERON 0
maetugr 34:3aa1cbcde59d 21 #define ELEVATOR 1
maetugr 34:3aa1cbcde59d 22 #define RUDDER 2
maetugr 34:3aa1cbcde59d 23 #define THROTTLE 3
maetugr 34:3aa1cbcde59d 24 // Axes
maetugr 34:3aa1cbcde59d 25 #define ROLL 0
maetugr 34:3aa1cbcde59d 26 #define PITCH 1
maetugr 34:3aa1cbcde59d 27 #define YAW 2
maetugr 25:0498d3041afa 28
maetugr 29:8b7362a2ee14 29 #define PC_CONNECTED // decoment if you want to debug per USB/Bluetooth and your PC
maetugr 2:93f703d2c4d7 30
maetugr 34:3aa1cbcde59d 31 // Global variables
maetugr 34:3aa1cbcde59d 32 bool armed = false; // this variable is for security (when false no motor rotates any more)
maetugr 34:3aa1cbcde59d 33 float dt = 0;
maetugr 34:3aa1cbcde59d 34 float time_for_dt = 0;
maetugr 34:3aa1cbcde59d 35 float dt_read_sensors = 0;
maetugr 34:3aa1cbcde59d 36 float time_read_sensors = 0;
maetugr 34:3aa1cbcde59d 37 float controller_value[] = {0,0,0}; // The calculated answer form the Controller
maetugr 34:3aa1cbcde59d 38 float RC_angle[] = {0,0,0}; // Angle of the RC Sticks, to steer the QC
maetugr 34:3aa1cbcde59d 39
maetugr 35:2a9465fedb99 40 float P = 4.0; // PID values
maetugr 34:3aa1cbcde59d 41 float I = 0;
maetugr 35:2a9465fedb99 42 float D = 2.0;
maetugr 34:3aa1cbcde59d 43
maetugr 14:cf260677ecde 44 Timer GlobalTimer; // global time to calculate processing speed
maetugr 34:3aa1cbcde59d 45 Ticker Dutycycler; // timecontrolled interrupt for exact timed control loop
maetugr 14:cf260677ecde 46
maetugr 34:3aa1cbcde59d 47 // Initialisation of hardware (see includes for more info)
maetugr 5:818c0668fd2d 48 LED LEDs;
maetugr 21:c2a2e7cbabdd 49 #ifdef PC_CONNECTED
maetugr 35:2a9465fedb99 50 PC pc(USBTX, USBRX, 921600); // USB
maetugr 35:2a9465fedb99 51 //PC pc(p9, p10, 115200); // Bluetooth
maetugr 21:c2a2e7cbabdd 52 #endif
maetugr 5:818c0668fd2d 53 L3G4200D Gyro(p28, p27);
maetugr 5:818c0668fd2d 54 ADXL345 Acc(p28, p27);
maetugr 11:9bf69bc6df45 55 HMC5883 Comp(p28, p27);
maetugr 14:cf260677ecde 56 BMP085_old Alt(p28, p27);
maetugr 34:3aa1cbcde59d 57 RC_Channel RC[] = {RC_Channel(p5,1), RC_Channel(p6,2), RC_Channel(p8,4), RC_Channel(p7,3)}; // no p19/p20 !
maetugr 34:3aa1cbcde59d 58 Servo_PWM ESC[] = {Servo_PWM(p21,PPM_FREQU), Servo_PWM(p22,PPM_FREQU), Servo_PWM(p23,PPM_FREQU), Servo_PWM(p24,PPM_FREQU)}; // p21 - p26 only because PWM needed!
maetugr 34:3aa1cbcde59d 59 IMU_Filter IMU; // (don't write () after constructor for no arguments!)
maetugr 34:3aa1cbcde59d 60 Mixer MIX(1); // 0 for +-Formation, 1 for X-Formation
maetugr 34:3aa1cbcde59d 61 PID Controller[] = {PID(P, I, D, 1000), PID(P, I, D, 1000), PID(0.5, 0, 0, 1000)}; // 0:X:Roll 1:Y:Pitch 2:Z:Yaw
maetugr 21:c2a2e7cbabdd 62
maetugr 28:ba6ca9f4def4 63 void dutycycle() // method which is called by the Ticker Dutycycler every RATE seconds
maetugr 8:d25ecdcdbeb5 64 {
maetugr 33:fd98776b6cc7 65 time_read_sensors = GlobalTimer.read(); // start time measure for sensors
maetugr 12:67a06c9b69d5 66
maetugr 15:753c5d6a63b3 67 // read data from sensors // ATTENTION! the I2C option repeated true is important because otherwise interrupts while bus communications cause crashes
maetugr 14:cf260677ecde 68 Gyro.read();
maetugr 34:3aa1cbcde59d 69 Acc.read();
maetugr 34:3aa1cbcde59d 70 //Comp.read(); // TODO: not every loop every sensor? altitude not that important
maetugr 34:3aa1cbcde59d 71 //Alt.Update(); // TODO needs very long to read because of waits
maetugr 12:67a06c9b69d5 72
maetugr 35:2a9465fedb99 73 pc.printf("%6.1f,%6.1f,%6.1f,%6.1f,%6.1f,%6.1f\r\n", Gyro.data[0], Gyro.data[1], Gyro.data[2], Acc.data[0], Acc.data[1], Acc.data[2]);
maetugr 35:2a9465fedb99 74
maetugr 33:fd98776b6cc7 75 dt_read_sensors = GlobalTimer.read() - time_read_sensors; // stop time measure for sensors
maetugr 8:d25ecdcdbeb5 76
maetugr 33:fd98776b6cc7 77 // meassure dt for the filter
maetugr 33:fd98776b6cc7 78 dt = GlobalTimer.read() - time_for_dt; // time in us since last loop
maetugr 33:fd98776b6cc7 79 time_for_dt = GlobalTimer.read(); // set new time for next measurement
maetugr 12:67a06c9b69d5 80
maetugr 26:96a072233d7a 81 IMU.compute(dt, Gyro.data, Acc.data);
maetugr 35:2a9465fedb99 82 //pc.printf("%f,%f,%f,%3.5fs,%3.5fs\r\n", IMU.angle[0], IMU.angle[1], IMU.angle[2], dt, dt_read_sensors);
maetugr 35:2a9465fedb99 83
maetugr 21:c2a2e7cbabdd 84 // Arming / disarming
maetugr 34:3aa1cbcde59d 85 if(RC[THROTTLE].read() < 20 && RC[RUDDER].read() > 850) {
maetugr 21:c2a2e7cbabdd 86 armed = true;
maetugr 25:0498d3041afa 87 }
maetugr 34:3aa1cbcde59d 88 if((RC[THROTTLE].read() < 30 && RC[RUDDER].read() < 30) || RC[RUDDER].read() < -10 || RC[THROTTLE].read() < -10 || RC[ELEVATOR].read() < -10 || RC[AILERON].read() < -10) {
maetugr 20:e116e596e540 89 armed = false;
maetugr 25:0498d3041afa 90 }
maetugr 20:e116e596e540 91
maetugr 34:3aa1cbcde59d 92 // RC Angle
maetugr 33:fd98776b6cc7 93 for(int i=0;i<2;i++) { // calculate new angle we want the QC to have
maetugr 31:872d8b8c7812 94 RC_angle[i] = (RC[i].read()-500)*RC_SENSITIVITY/500.0;
maetugr 33:fd98776b6cc7 95 if (RC_angle[i] < -RC_SENSITIVITY-2)
maetugr 33:fd98776b6cc7 96 RC_angle[i] = 0;
maetugr 33:fd98776b6cc7 97 }
maetugr 33:fd98776b6cc7 98 //RC_angle[2] += (RC[3].read()-500)*YAWSPEED/500; // for yaw angle is integrated
maetugr 30:021e13b62575 99
maetugr 34:3aa1cbcde59d 100 // PID controlling
maetugr 30:021e13b62575 101 for(int i=0;i<3;i++) {
maetugr 29:8b7362a2ee14 102 Controller[i].setIntegrate(armed); // only integrate in controller when armed, so the value is not totally odd from not flying
maetugr 35:2a9465fedb99 103 controller_value[i] = Controller[i].compute(0, IMU.angle[i]);
maetugr 35:2a9465fedb99 104 //controller_value[i] = Controller[i].compute(RC_angle[i], IMU.angle[i]); // give the controller the actual angle and get his advice to correct
maetugr 30:021e13b62575 105 }
maetugr 30:021e13b62575 106
maetugr 29:8b7362a2ee14 107
maetugr 21:c2a2e7cbabdd 108 if (armed) // for SECURITY!
maetugr 22:d301b455a1ad 109 {
maetugr 34:3aa1cbcde59d 110 MIX.compute(RC[THROTTLE].read(), controller_value); // let the Mixer compute motorspeeds based on throttle and controller output
maetugr 28:ba6ca9f4def4 111
maetugr 28:ba6ca9f4def4 112 for(int i=0;i<4;i++) // Set new motorspeeds
maetugr 26:96a072233d7a 113 ESC[i] = (int)MIX.Motor_speed[i];
maetugr 25:0498d3041afa 114
maetugr 15:753c5d6a63b3 115 } else {
maetugr 26:96a072233d7a 116 for(int i=0;i<4;i++) // for security reason, set every motor to zero speed
maetugr 28:ba6ca9f4def4 117 ESC[i] = 0;
maetugr 21:c2a2e7cbabdd 118 }
maetugr 8:d25ecdcdbeb5 119 }
maetugr 5:818c0668fd2d 120
maetugr 33:fd98776b6cc7 121 void commandexecuter(char* command) { // take new PID values on the fly
maetugr 31:872d8b8c7812 122 if (command[0] == 'p')
maetugr 33:fd98776b6cc7 123 P = atof(&command[1]);
maetugr 31:872d8b8c7812 124 if (command[0] == 'i')
maetugr 33:fd98776b6cc7 125 I = atof(&command[1]);
maetugr 31:872d8b8c7812 126 if (command[0] == 'd')
maetugr 33:fd98776b6cc7 127 D = atof(&command[1]);
maetugr 33:fd98776b6cc7 128 for(int i=0;i<2;i++) {
maetugr 33:fd98776b6cc7 129 Controller[i].setPID(P,I,D); // give the controller the new PID values
maetugr 31:872d8b8c7812 130 }
maetugr 31:872d8b8c7812 131 }
maetugr 31:872d8b8c7812 132
maetugr 26:96a072233d7a 133 int main() { // main programm for initialisation and debug output
maetugr 26:96a072233d7a 134 NVIC_SetPriority(TIMER3_IRQn, 1); // set priorty of tickers below hardware interrupts (standard priority is 0)(this is to prevent the RC interrupt from waiting until ticker is finished)
maetugr 15:753c5d6a63b3 135
maetugr 21:c2a2e7cbabdd 136 #ifdef PC_CONNECTED
maetugr 21:c2a2e7cbabdd 137 // init screen
maetugr 12:67a06c9b69d5 138 pc.locate(10,5);
maetugr 21:c2a2e7cbabdd 139 pc.printf("Flybed v0.2");
maetugr 12:67a06c9b69d5 140 #endif
maetugr 1:5a64632b1eb9 141 LEDs.roll(2);
maetugr 5:818c0668fd2d 142
maetugr 33:fd98776b6cc7 143 Gyro.calibrate(50, 0.02);
maetugr 33:fd98776b6cc7 144 Acc.calibrate(50, 0.02);
maetugr 33:fd98776b6cc7 145
maetugr 21:c2a2e7cbabdd 146 // Start!
maetugr 2:93f703d2c4d7 147 GlobalTimer.start();
maetugr 28:ba6ca9f4def4 148 Dutycycler.attach(&dutycycle, RATE); // start to process all RATEms
maetugr 12:67a06c9b69d5 149
maetugr 12:67a06c9b69d5 150 while(1) {
maetugr 35:2a9465fedb99 151 #ifdef PC_CONNECTED
maetugr 35:2a9465fedb99 152 if (pc.readable()) // Get Serial input (polled because interrupts disturb I2C)
maetugr 35:2a9465fedb99 153 pc.readcommand(&commandexecuter);
maetugr 35:2a9465fedb99 154 //pc.printf("%f %f %f %f %f %f\r\n", IMU.angle[0], IMU.angle[1], IMU.angle[2], controller_value[0], controller_value[1], controller_value[2]); // For live plot in MATLAB of IMU
maetugr 35:2a9465fedb99 155 //pc.printf("%f,%f,%f,%f,%f,%f\r\n", IMU.angle[0], IMU.angle[1], IMU.angle[2], controller_value[0], controller_value[1], controller_value[2]);
maetugr 35:2a9465fedb99 156 #if 0 //pc.cls();
maetugr 35:2a9465fedb99 157 pc.locate(20,0); // PC output
maetugr 35:2a9465fedb99 158 pc.printf("dt:%3.5fs dt_sensors:%3.5fs Altitude:%6.1fm ", dt, dt_read_sensors, Alt.CalcAltitude(Alt.Pressure));
maetugr 35:2a9465fedb99 159 pc.locate(5,1);
maetugr 35:2a9465fedb99 160 if(armed)
maetugr 35:2a9465fedb99 161 pc.printf("ARMED!!!!!!!!!!!!!");
maetugr 35:2a9465fedb99 162 else
maetugr 35:2a9465fedb99 163 pc.printf("DIS_ARMED ");
maetugr 35:2a9465fedb99 164 pc.locate(5,3);
maetugr 35:2a9465fedb99 165 pc.printf("Roll:%6.1f Pitch:%6.1f Yaw:%6.1f ", IMU.angle[0], IMU.angle[1], IMU.angle[2]);
maetugr 35:2a9465fedb99 166 pc.locate(5,4);
maetugr 35:2a9465fedb99 167 pc.printf("q0:%6.1f q1:%6.1f q2:%6.1f q3:%6.1f ", IMU.q0, IMU.q1, IMU.q2, IMU.q3);
maetugr 35:2a9465fedb99 168 pc.locate(5,5);
maetugr 35:2a9465fedb99 169 pc.printf("Gyro.data: X:%6.1f Y:%6.1f Z:%6.1f", Gyro.data[0], Gyro.data[1], Gyro.data[2]);
maetugr 35:2a9465fedb99 170 pc.locate(5,6);
maetugr 35:2a9465fedb99 171 pc.printf("Acc.data: X:%6.1f Y:%6.1f Z:%6.1f", Acc.data[0], Acc.data[1], Acc.data[2]);
maetugr 35:2a9465fedb99 172
maetugr 35:2a9465fedb99 173 pc.locate(5,8);
maetugr 35:2a9465fedb99 174 pc.printf("P:%6.1f I:%6.1f D:%6.1f ", P, I, D);
maetugr 35:2a9465fedb99 175
maetugr 35:2a9465fedb99 176 pc.locate(5,11);
maetugr 35:2a9465fedb99 177 pc.printf("PID Result:");
maetugr 35:2a9465fedb99 178 for(int i=0;i<3;i++)
maetugr 35:2a9465fedb99 179 pc.printf(" %d: %6.1f", i, controller_value[i]);
maetugr 35:2a9465fedb99 180 pc.locate(5,14);
maetugr 35:2a9465fedb99 181 pc.printf("RC angle: roll: %f pitch: %f yaw: %f ", RC_angle[0], RC_angle[1], RC_angle[2]);
maetugr 35:2a9465fedb99 182 pc.locate(5,16);
maetugr 35:2a9465fedb99 183 pc.printf("Motor: 0:%d 1:%d 2:%d 3:%d ", (int)MIX.Motor_speed[0], (int)MIX.Motor_speed[1], (int)MIX.Motor_speed[2], (int)MIX.Motor_speed[3]);
maetugr 35:2a9465fedb99 184
maetugr 35:2a9465fedb99 185 // RC
maetugr 35:2a9465fedb99 186 pc.locate(10,19);
maetugr 35:2a9465fedb99 187 pc.printf("RC0: %4d RC1: %4d RC2: %4d RC3: %4d ", RC[0].read(), RC[1].read(), RC[2].read(), RC[3].read());
maetugr 35:2a9465fedb99 188
maetugr 35:2a9465fedb99 189 pc.locate(10,21);
maetugr 35:2a9465fedb99 190 pc.printf("Commandline: %s ", pc.command);
maetugr 35:2a9465fedb99 191 #endif
maetugr 21:c2a2e7cbabdd 192 #endif
maetugr 21:c2a2e7cbabdd 193 if(armed){
maetugr 21:c2a2e7cbabdd 194 LEDs.rollnext();
maetugr 21:c2a2e7cbabdd 195 } else {
maetugr 26:96a072233d7a 196 for(int i=1;i<=4;i++)
maetugr 26:96a072233d7a 197 LEDs.set(i);
maetugr 21:c2a2e7cbabdd 198 }
maetugr 29:8b7362a2ee14 199 wait(0.05);
maetugr 0:0c4fafa398b4 200 }
maetugr 28:ba6ca9f4def4 201 }