Diff: MSCFileSystem.cpp
- Revision:
- 0:63ed631d8c3a
diff -r 000000000000 -r 63ed631d8c3a MSCFileSystem.cpp
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/MSCFileSystem.cpp Fri Jan 21 08:39:48 2011 +0000
@@ -0,0 +1,113 @@
+/* USB Mass Storage device file system
+ * Copyrigh (c) 2010, Igor Skochinsky
+ * based on SDFileStorage
+ * Copyright (c) 2008-2009, sford
+ */
+
+/* Introduction
+ * ------------
+ * TODO: write one
+ * we're basically using NXP's USBHotLite sample code, just plugging in our own FAT library
+ */
+
+#include "MSCFileSystem.h"
+#include "usbhost_inc.h"
+
+MSCFileSystem::MSCFileSystem(const char* name) :
+ FATFileSystem(name)
+{
+}
+
+void print_inquiry(USB_INT08U *inqReply)
+{
+ // see USB Mass Storage Class – UFI Command Specification,
+ // 4.2 INQUIRY Command
+ printf("Inquiry reply:\n");
+ uint8_t tmp = inqReply[0]&0x1F;
+ printf("Peripheral device type: %02Xh\n", tmp);
+ if ( tmp == 0 )
+ printf("\t- Direct access (floppy)\n");
+ else if ( tmp == 0x1F )
+ printf("\t- none (no FDD connected)\n");
+ else
+ printf("\t- unknown type\n");
+ tmp = inqReply[1] >> 7;
+ printf("Removable Media Bit: %d\n", tmp);
+ tmp = inqReply[2] & 3;
+ printf("ANSI Version: %02Xh\n", tmp);
+ if ( tmp != 0 )
+ printf("\t- warning! must be 0\n");
+ tmp = (inqReply[2]>>3) & 3;
+ printf("ECMA Version: %02Xh\n", tmp);
+ if ( tmp != 0 )
+ printf("\t- warning! should be 0\n");
+ tmp = inqReply[2]>>6;
+ printf("ISO Version: %02Xh\n", tmp);
+ if ( tmp != 0 )
+ printf("\t- warning! should be 0\n");
+ tmp = inqReply[3] & 0xF;
+ printf("Response Data Format: %02Xh\n", tmp);
+ if ( tmp != 1 )
+ printf("\t- warning! should be 1\n");
+ tmp = inqReply[4];
+ printf("Additional length: %02Xh\n", tmp);
+ if ( tmp != 0x1F )
+ printf("\t- warning! should be 1Fh\n");
+ printf("Vendor Information: '%.8s'\n", &inqReply[8]);
+ printf("Product Identification: '%.16s'\n", &inqReply[16]);
+ printf("Product Revision: '%.4s'\n", &inqReply[32]);
+}
+
+int MSCFileSystem::initialise_msc()
+{
+ USB_INT32S rc;
+ USB_INT08U inquiryResult[INQUIRY_LENGTH];
+
+ //print_clock();
+ Host_Init(); /* Initialize the host controller */
+ rc = Host_EnumDev(); /* Enumerate the device connected */
+ if (rc != OK)
+ {
+ fprintf(stderr, "Could not enumerate device: %d\n", rc);
+ return rc;
+ }
+
+
+ /* Initialize the mass storage and scsi interfaces */
+ rc = MS_Init( &_blkSize, &_numBlks, inquiryResult );
+ if (rc != OK)
+ {
+ fprintf(stderr, "Could not initialize mass storage interface: %d\n", rc);
+ return rc;
+ }
+ printf("Successfully initialized mass storage interface; %d blocks of size %d\n", _numBlks, _blkSize);
+ print_inquiry(inquiryResult);
+ // FATFileSystem supports only 512-byte blocks
+ return _blkSize == 512 ? OK : 1;
+}
+
+int MSCFileSystem::disk_initialize()
+{
+ if ( initialise_msc() != OK )
+ return 1;
+
+ return 0;
+}
+
+int MSCFileSystem::disk_write(const char *buffer, int block_number)
+{
+ if ( OK == MS_BulkSend(block_number, 1, (USB_INT08U *)buffer) )
+ return 0;
+ return 1;
+}
+
+int MSCFileSystem::disk_read(char *buffer, int block_number)
+{
+ if ( OK == MS_BulkRecv(block_number, 1, (USB_INT08U *)buffer) )
+ return 0;
+ return 1;
+}
+
+int MSCFileSystem::disk_status() { return 0; }
+int MSCFileSystem::disk_sync() { return 0; }
+int MSCFileSystem::disk_sectors() { return _numBlks; }