Diff: main.cpp

Revision:

14:02223911a495

Parent:

13:6ce90b84a3fe

Child:

15:3df9b2f9e815

diff -r 6ce90b84a3fe -r 02223911a495 main.cpp
--- a/main.cpp	Wed Apr 06 00:10:30 2016 +0000
+++ b/main.cpp	Thu Jun 16 09:44:05 2016 +0000
@@ -5,19 +5,31 @@
 #include <vector>
 #include <algorithm>
 
-static uint8_t config_network_addr[] = { 0x01, 0x02, 0x03, 0x04 };
-static uint8_t config_network_nskey[] = {0x2B, 0x7E, 0x15, 0x16, 0x28, 0xAE, 0xD2, 0xA6, 0xAB, 0xF7, 0x15, 0x88, 0x09, 0xCF, 0x4F, 0x3C};
-static uint8_t config_network_dskey[] = {0x2B, 0x7E, 0x15, 0x16, 0x28, 0xAE, 0xD2, 0xA6, 0xAB, 0xF7, 0x15, 0x88, 0x09, 0xCF, 0x4F, 0x3C};
-static uint8_t config_frequency_sub_band = 7;
+static bool join_mode = false; //true = OTAA / false = ABP
+
+//enter here yout ABP address and keys
+static uint8_t config_network_addr[] = { 0x6C, 0x63, 0x6F, 0x4B };
+static uint8_t config_network_nskey[] = { 0x7A, 0xAC, 0x4E, 0xAD, 0xFF, 0x06, 0xFD, 0xBC, 0x2F, 0xF8, 0x2B, 0xE3, 0x9C, 0x5C, 0x78, 0x1A };
+static uint8_t config_network_dskey[] = { 0xD0, 0x3F, 0x29, 0xCD, 0xFE, 0x43, 0x96, 0xC1, 0xCD, 0x3F, 0x2E, 0x5B, 0x81, 0x3E, 0xC6, 0x9E };
+
+//enter here your OTAA Eui's Key
+static uint8_t config_network_deveui [] = { 0x00, 0x80, 0x00, 0x00, 0x00, 0x00, 0x9F, 0xA6 };
+static uint8_t config_network_appeui [] = { 0x70, 0xB3, 0xD5, 0x7E, 0xD0, 0x00, 0x03, 0xDD };
+static uint8_t config_network_appkey [] = { 0xD0, 0xC1, 0xDC, 0xC9, 0x83, 0x43, 0x7E, 0x4C, 0x54, 0xE7, 0x61, 0xE0, 0x8D, 0xDA, 0xA8, 0x2E };
+
+//configure the frequency band (only for Mdot 915 MHz)
+static uint8_t config_frequency_sub_band = 1;
 
 mDot* dot;
 
 void setupNetwork();
 
 int main() {
+
+    Serial pc(USBTX, USBRX);
     // Set up the network
     setupNetwork();
-    
+
     // Message you want to send
     std::string data_str = "Hello!";
 
@@ -25,7 +37,7 @@
     std::vector<uint8_t> data;
     for (std::string::iterator it = data_str.begin(); it != data_str.end(); it++)
         data.push_back((uint8_t) *it);
-    
+
     // Start the loop
     int32_t ret;
     while (true) {
@@ -33,78 +45,121 @@
         if ((ret = dot->send(data)) != mDot::MDOT_OK) {
             // Oops, there was an error, check the debug screen
             logError("Failed to send", ret, mDot::getReturnCodeString(ret).c_str());
+            //pc.printf("Failed to send");
         } else {
             // Sent the data
             logInfo("Successfully sent data");
+            //pc.printf("Successfully sent data");
         }
-        
+
         // Wait 5 seconds
         osDelay(std::max((uint32_t)5000, (uint32_t)dot->getNextTxMs()));
     }
 
-    return 0;
+    //return 0;
 }
 
 void setupNetwork() {
+
+    //Serial pc(USBTX, USBRX);
+
     int32_t ret;
 
     // get a mDot handle
     dot = mDot::getInstance();
-    
+
     // print library version information
     logInfo("Version: %s", dot->getId().c_str());
 
     // reset to default config so we know what state we're in
     dot->resetConfig();
-    
+
     dot->setLogLevel(mts::MTSLog::INFO_LEVEL);
 
-    dot->setJoinMode(mDot::MANUAL);
+    //joinmode: [MANUAL = ABP]/[OTA]/[AUTO_OTA]
+    if(join_mode)
+      dot->setJoinMode(mDot::OTA);
+    else
+      dot->setJoinMode(mDot::MANUAL);
 
     // set up the mDot with our network information: frequency sub band, network name, and network password
     // these can all be saved in NVM so they don't need to be set every time - see mDot::saveConfig()
-    
+
     // frequency sub band is only applicable in the 915 (US) frequency band
     logInfo("Setting frequency sub band");
     if ((ret = dot->setFrequencySubBand(config_frequency_sub_band)) != mDot::MDOT_OK) {
         logError("Failed to set frequency sub band %d:%s", ret, mDot::getReturnCodeString(ret).c_str());
     }
-    
+
     std::vector<uint8_t> temp;
-    
-    if ((ret = dot->setPublicNetwork(true)) != mDot::MDOT_OK) {
+
+    if ((ret = dot->setPublicNetwork(join_mode)) != mDot::MDOT_OK) {
         logError("Failed to enable public network %d:%s", ret, mDot::getReturnCodeString(ret).c_str());
     }
-    
-    for (int i = 0; i < 4; i++) {
-        temp.push_back(config_network_addr[i]);    
-    }
 
-    logInfo("setting network addr");
-    if ((ret = dot->setNetworkAddress(temp)) != mDot::MDOT_OK) {
-        logError("failed to set network name %d:%s", ret, mDot::getReturnCodeString(ret).c_str());
-    }
-    
-    temp.clear();
-    for (int i = 0; i < 16; i++) {
-        temp.push_back(config_network_nskey[i]);    
+    //Configuring OTAA/ABP
+    if (join_mode){
+      for (int i = 0; i < 4; i++) {
+          temp.push_back(config_network_addr[i]);
+      }
+
+      logInfo("setting network addr");
+      if ((ret = dot->setNetworkAddress(temp)) != mDot::MDOT_OK) {
+          logError("failed to set network name %d:%s", ret, mDot::getReturnCodeString(ret).c_str());
+      }
+
+      temp.clear();
+      for (int i = 0; i < 16; i++) {
+          temp.push_back(config_network_nskey[i]);
+      }
+
+      logInfo("setting network password");
+      if ((ret = dot->setNetworkSessionKey(temp)) != mDot::MDOT_OK) {
+          logError("failed to set network password %d:%s", ret, mDot::getReturnCodeString(ret).c_str());
+      }
+
+      temp.clear();
+      for (int i = 0; i < 16; i++) {
+          temp.push_back(config_network_dskey[i]);
+      }
+
+      logInfo("setting network password");
+      if ((ret = dot->setDataSessionKey(temp)) != mDot::MDOT_OK) {
+          logError("failed to set network password %d:%s", ret, mDot::getReturnCodeString(ret).c_str());
+      }
+    }else{
+      temp.clear();
+      for (int i = 0; i < 8; i++) {
+          temp.push_back(config_network_deveui[i]);
+      }
+
+      logInfo("setting Device EUI");
+      if ((ret = dot->setDeviceId(temp)) != mDot::MDOT_OK) {
+          logError("failed to set network password %d:%s", ret, mDot::getReturnCodeString(ret).c_str());
+      }
+
+      temp.clear();
+      for (int i = 0; i < 8; i++) {
+          temp.push_back(config_network_appeui[i]);
+      }
+
+
+      logInfo("setting App Eui");
+      if ((ret = dot->setNetworkId(temp)) != mDot::MDOT_OK) {
+          logError("failed to set network password %d:%s", ret, mDot::getReturnCodeString(ret).c_str());
+      }
+
+      temp.clear();
+      for (int i = 0; i < 16; i++) {
+          temp.push_back(config_network_appkey[i]);
+      }
+
+      logInfo("setting App Key");
+      if ((ret = dot->setNetworkKey(temp)) != mDot::MDOT_OK) {
+          logError("failed to set network password %d:%s", ret, mDot::getReturnCodeString(ret).c_str());
+      }
     }
-    
-    logInfo("setting network password");
-    if ((ret = dot->setNetworkSessionKey(temp)) != mDot::MDOT_OK) {
-        logError("failed to set network password %d:%s", ret, mDot::getReturnCodeString(ret).c_str());
-    }
-    
-    temp.clear();
-    for (int i = 0; i < 16; i++) {
-        temp.push_back(config_network_dskey[i]);    
-    }
-    
-    logInfo("setting network password");
-    if ((ret = dot->setDataSessionKey(temp)) != mDot::MDOT_OK) {
-        logError("failed to set network password %d:%s", ret, mDot::getReturnCodeString(ret).c_str());
-    }
-    
+
     // a higher spreading factor allows for longer range but lower throughput
     // in the 915 (US) frequency band, spreading factors 7 - 10 are available
     // in the 868 (EU) frequency band, spreading factors 7 - 12 are available
@@ -112,13 +167,13 @@
     if ((ret = dot->setTxDataRate(mDot::SF_8)) != mDot::MDOT_OK) {
         logError("Failed to set TX datarate %d:%s", ret, mDot::getReturnCodeString(ret).c_str());
     }
-    
+
     // request receive confirmation of packets from the gateway
     logInfo("Disabling ACKs");
     if ((ret = dot->setAck(0)) != mDot::MDOT_OK) {
         logError("Failed to enable ACKs %d:%s", ret, mDot::getReturnCodeString(ret).c_str());
     }
-    
+
     // save this configuration to the mDot's NVM
     logInfo("Saving config");
     if (! dot->saveConfig()) {
@@ -126,10 +181,11 @@
     }
 
     // attempt to join the network
-    //logInfo("Joining network");
-//    while ((ret = dot->joinNetwork()) != mDot::MDOT_OK) {
-//        logError("Failed to join network %d:%s", ret, mDot::getReturnCodeString(ret).c_str());
-//        // in the 868 (EU) frequency band, we need to wait until another channel is available before transmitting again
-//        osDelay(std::max((uint32_t)1000, (uint32_t)dot->getNextTxMs()));
-//    }
-}
\ No newline at end of file
+    logInfo("Joining network");
+            while ((ret = dot->joinNetwork()) != mDot::MDOT_OK) {
+        logError("Failed to join network %d:%s", ret, mDot::getReturnCodeString(ret).c_str());
+        // in the 868 (EU) frequency band, we need to wait until another channel is available before transmitting again
+        osDelay(std::max((uint32_t)1000, (uint32_t)dot->getNextTxMs()));
+    }
+    logInfo("Successfully joined the network");
+}