Diff: main.cpp

Revision:

15:3df9b2f9e815

Parent:

14:02223911a495

--- a/main.cpp	Thu Jun 16 09:44:05 2016 +0000
+++ b/main.cpp	Fri Jun 17 13:04:18 2016 +0000
@@ -1,46 +1,46 @@
 #include "mbed.h"
 #include "mDot.h"
 #include "MTSLog.h"
+#include <AnalogIn.h>
 #include <string>
 #include <vector>
 #include <algorithm>
 
-static bool join_mode = false; //true = OTAA / false = ABP
-
-//enter here yout ABP address and keys
-static uint8_t config_network_addr[] = { 0x6C, 0x63, 0x6F, 0x4B };
-static uint8_t config_network_nskey[] = { 0x7A, 0xAC, 0x4E, 0xAD, 0xFF, 0x06, 0xFD, 0xBC, 0x2F, 0xF8, 0x2B, 0xE3, 0x9C, 0x5C, 0x78, 0x1A };
-static uint8_t config_network_dskey[] = { 0xD0, 0x3F, 0x29, 0xCD, 0xFE, 0x43, 0x96, 0xC1, 0xCD, 0x3F, 0x2E, 0x5B, 0x81, 0x3E, 0xC6, 0x9E };
+static uint8_t config_network_addr[] = { 0x44, 0x08, 0xCC, 0x9A };
+static uint8_t config_network_nskey[] = { 0x99, 0xC8, 0xA0, 0x4C, 0x50, 0x25, 0x94, 0xD2, 0xEB, 0xFD, 0xD9, 0x37, 0x56, 0x3C, 0x83, 0x32 };
+static uint8_t config_network_dskey[] = { 0x07, 0xA5, 0x9B, 0xAD, 0x11, 0x0B, 0x94, 0x6E, 0xEE, 0xE5, 0xF0, 0x87, 0xD0, 0x10, 0x35, 0x07 };
 
-//enter here your OTAA Eui's Key
-static uint8_t config_network_deveui [] = { 0x00, 0x80, 0x00, 0x00, 0x00, 0x00, 0x9F, 0xA6 };
-static uint8_t config_network_appeui [] = { 0x70, 0xB3, 0xD5, 0x7E, 0xD0, 0x00, 0x03, 0xDD };
-static uint8_t config_network_appkey [] = { 0xD0, 0xC1, 0xDC, 0xC9, 0x83, 0x43, 0x7E, 0x4C, 0x54, 0xE7, 0x61, 0xE0, 0x8D, 0xDA, 0xA8, 0x2E };
-
-//configure the frequency band (only for Mdot 915 MHz)
-static uint8_t config_frequency_sub_band = 1;
+static uint8_t config_frequency_sub_band = 7;
 
 mDot* dot;
 
 void setupNetwork();
+//int readLight();
+
+//AnalogIn light(A0);
 
 int main() {
-
+    
     Serial pc(USBTX, USBRX);
     // Set up the network
     setupNetwork();
-
-    // Message you want to send
-    std::string data_str = "Hello!";
-
-    // Copy the message in an array of bytes
-    std::vector<uint8_t> data;
-    for (std::string::iterator it = data_str.begin(); it != data_str.end(); it++)
-        data.push_back((uint8_t) *it);
-
+     
     // Start the loop
     int32_t ret;
     while (true) {
+        
+        //PB_0 = Analog pin 1
+        AnalogIn pinn(PB_0); 
+        
+        //read voltage
+        uint16_t light = (int)(pinn.read()*1023);
+        logInfo("Light level :%d \n", light);
+               
+        // Copy the message in an array of bytes
+        std::vector<uint8_t> data;
+        for (int i = 0; i <= sizeof(light); i++)
+            data.push_back((uint8_t)(light >> ((8*i-8) & 0xFF)));
+            
         // Send the data
         if ((ret = dot->send(data)) != mDot::MDOT_OK) {
             // Oops, there was an error, check the debug screen
@@ -51,115 +51,80 @@
             logInfo("Successfully sent data");
             //pc.printf("Successfully sent data");
         }
-
+        
         // Wait 5 seconds
-        osDelay(std::max((uint32_t)5000, (uint32_t)dot->getNextTxMs()));
+        osDelay(std::max((uint32_t)1000, (uint32_t)dot->getNextTxMs()));
     }
 
     //return 0;
 }
 
 void setupNetwork() {
-
+    
     //Serial pc(USBTX, USBRX);
-
+    
     int32_t ret;
 
     // get a mDot handle
     dot = mDot::getInstance();
-
+    
     // print library version information
     logInfo("Version: %s", dot->getId().c_str());
 
     // reset to default config so we know what state we're in
     dot->resetConfig();
-
+    
     dot->setLogLevel(mts::MTSLog::INFO_LEVEL);
-
+    
     //joinmode: [MANUAL = ABP]/[OTA]/[AUTO_OTA]
-    if(join_mode)
-      dot->setJoinMode(mDot::OTA);
-    else
-      dot->setJoinMode(mDot::MANUAL);
-
+    dot->setJoinMode(mDot::MANUAL);
+        
     // set up the mDot with our network information: frequency sub band, network name, and network password
     // these can all be saved in NVM so they don't need to be set every time - see mDot::saveConfig()
-
+    
     // frequency sub band is only applicable in the 915 (US) frequency band
     logInfo("Setting frequency sub band");
     if ((ret = dot->setFrequencySubBand(config_frequency_sub_band)) != mDot::MDOT_OK) {
         logError("Failed to set frequency sub band %d:%s", ret, mDot::getReturnCodeString(ret).c_str());
     }
-
+    
     std::vector<uint8_t> temp;
+    
 
-    if ((ret = dot->setPublicNetwork(join_mode)) != mDot::MDOT_OK) {
+    if ((ret = dot->setPublicNetwork(true)) != mDot::MDOT_OK) {
         logError("Failed to enable public network %d:%s", ret, mDot::getReturnCodeString(ret).c_str());
     }
-
-    //Configuring OTAA/ABP
-    if (join_mode){
-      for (int i = 0; i < 4; i++) {
-          temp.push_back(config_network_addr[i]);
-      }
-
-      logInfo("setting network addr");
-      if ((ret = dot->setNetworkAddress(temp)) != mDot::MDOT_OK) {
-          logError("failed to set network name %d:%s", ret, mDot::getReturnCodeString(ret).c_str());
-      }
-
-      temp.clear();
-      for (int i = 0; i < 16; i++) {
-          temp.push_back(config_network_nskey[i]);
-      }
-
-      logInfo("setting network password");
-      if ((ret = dot->setNetworkSessionKey(temp)) != mDot::MDOT_OK) {
-          logError("failed to set network password %d:%s", ret, mDot::getReturnCodeString(ret).c_str());
-      }
-
-      temp.clear();
-      for (int i = 0; i < 16; i++) {
-          temp.push_back(config_network_dskey[i]);
-      }
+    
 
-      logInfo("setting network password");
-      if ((ret = dot->setDataSessionKey(temp)) != mDot::MDOT_OK) {
-          logError("failed to set network password %d:%s", ret, mDot::getReturnCodeString(ret).c_str());
-      }
-    }else{
-      temp.clear();
-      for (int i = 0; i < 8; i++) {
-          temp.push_back(config_network_deveui[i]);
-      }
-
-      logInfo("setting Device EUI");
-      if ((ret = dot->setDeviceId(temp)) != mDot::MDOT_OK) {
-          logError("failed to set network password %d:%s", ret, mDot::getReturnCodeString(ret).c_str());
-      }
-
-      temp.clear();
-      for (int i = 0; i < 8; i++) {
-          temp.push_back(config_network_appeui[i]);
-      }
-
-
-      logInfo("setting App Eui");
-      if ((ret = dot->setNetworkId(temp)) != mDot::MDOT_OK) {
-          logError("failed to set network password %d:%s", ret, mDot::getReturnCodeString(ret).c_str());
-      }
-
-      temp.clear();
-      for (int i = 0; i < 16; i++) {
-          temp.push_back(config_network_appkey[i]);
-      }
-
-      logInfo("setting App Key");
-      if ((ret = dot->setNetworkKey(temp)) != mDot::MDOT_OK) {
-          logError("failed to set network password %d:%s", ret, mDot::getReturnCodeString(ret).c_str());
-      }
+    for (int i = 0; i < 4; i++) {
+        temp.push_back(config_network_addr[i]);    
+    }
+ 
+    logInfo("setting network addr");
+    if ((ret = dot->setNetworkAddress(temp)) != mDot::MDOT_OK) {
+        logError("failed to set network name %d:%s", ret, mDot::getReturnCodeString(ret).c_str());
+    }
+    
+    temp.clear();
+    for (int i = 0; i < 16; i++) {
+        temp.push_back(config_network_nskey[i]);    
     }
-
+    
+    logInfo("setting network password");
+    if ((ret = dot->setNetworkSessionKey(temp)) != mDot::MDOT_OK) {
+        logError("failed to set network password %d:%s", ret, mDot::getReturnCodeString(ret).c_str());
+    }
+    
+    temp.clear();
+    for (int i = 0; i < 16; i++) {
+        temp.push_back(config_network_dskey[i]);    
+    }
+    
+    logInfo("setting network password");
+    if ((ret = dot->setDataSessionKey(temp)) != mDot::MDOT_OK) {
+        logError("failed to set network password %d:%s", ret, mDot::getReturnCodeString(ret).c_str());
+    }       
+   
     // a higher spreading factor allows for longer range but lower throughput
     // in the 915 (US) frequency band, spreading factors 7 - 10 are available
     // in the 868 (EU) frequency band, spreading factors 7 - 12 are available
@@ -167,25 +132,16 @@
     if ((ret = dot->setTxDataRate(mDot::SF_8)) != mDot::MDOT_OK) {
         logError("Failed to set TX datarate %d:%s", ret, mDot::getReturnCodeString(ret).c_str());
     }
-
+    
     // request receive confirmation of packets from the gateway
     logInfo("Disabling ACKs");
     if ((ret = dot->setAck(0)) != mDot::MDOT_OK) {
         logError("Failed to enable ACKs %d:%s", ret, mDot::getReturnCodeString(ret).c_str());
     }
-
+    
     // save this configuration to the mDot's NVM
     logInfo("Saving config");
     if (! dot->saveConfig()) {
         logError("Failed to save configuration");
     }
-
-    // attempt to join the network
-    logInfo("Joining network");
-            while ((ret = dot->joinNetwork()) != mDot::MDOT_OK) {
-        logError("Failed to join network %d:%s", ret, mDot::getReturnCodeString(ret).c_str());
-        // in the 868 (EU) frequency band, we need to wait until another channel is available before transmitting again
-        osDelay(std::max((uint32_t)1000, (uint32_t)dot->getNextTxMs()));
-    }
-    logInfo("Successfully joined the network");
-}
+}
\ No newline at end of file