Diff: common/GapAdvertisingData.cpp

Revision:

106:a20be740075d

diff -r f29ab9f74d7e -r a20be740075d common/GapAdvertisingData.cpp
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/common/GapAdvertisingData.cpp	Wed Jul 23 15:09:23 2014 +0100
@@ -0,0 +1,238 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include <stdio.h>
+#include <string.h>
+
+#include "GapAdvertisingData.h"
+
+/**************************************************************************/
+/*!
+    \brief  Creates a new GapAdvertisingData instance
+
+    \par EXAMPLE
+
+    \code
+
+    \endcode
+*/
+/**************************************************************************/
+GapAdvertisingData::GapAdvertisingData(void) : _payload(), _payloadLen(0), _appearance(GENERIC_TAG) {
+    /* empty */
+}
+
+/**************************************************************************/
+/*!
+    Destructor
+*/
+/**************************************************************************/
+GapAdvertisingData::~GapAdvertisingData(void)
+{
+}
+
+/**************************************************************************/
+/*!
+    \brief  Adds advertising data based on the specified AD type (see
+            DataType)
+
+    \args[in]   advDataType The Advertising 'DataType' to add
+    \args[in]   payload     Pointer to the payload contents
+    \args[in]   len         Size of the payload in bytes
+
+    \returns    ble_error_t
+
+    \retval     BLE_ERROR_NONE
+                Everything executed properly
+
+    \retval     BLE_ERROR_BUFFER_OVERFLOW
+                The specified data would cause the advertising buffer
+                to overflow
+
+    \par EXAMPLE
+
+    \code
+
+    \endcode
+*/
+/**************************************************************************/
+ble_error_t GapAdvertisingData::addData(DataType advDataType, const uint8_t *payload, uint8_t len)
+{
+    /* ToDo: Check if an AD type already exists and if the existing */
+    /*       value is exclusive or not (flags, etc.) */
+
+    /* Make sure we don't exceed the 31 byte payload limit */
+    if (_payloadLen + len + 2 > GAP_ADVERTISING_DATA_MAX_PAYLOAD) {
+        return BLE_ERROR_BUFFER_OVERFLOW;
+    }
+
+    /* Field length */
+    memset(&_payload[_payloadLen], len + 1, 1);
+    _payloadLen++;
+
+    /* Field ID */
+    memset(&_payload[_payloadLen], (uint8_t)advDataType, 1);
+    _payloadLen++;
+
+    /* Payload */
+    memcpy(&_payload[_payloadLen], payload, len);
+    _payloadLen += len;
+
+    return BLE_ERROR_NONE;
+}
+
+/**************************************************************************/
+/*!
+    \brief  Helper function to add APPEARANCE data to the advertising
+            payload
+
+    \args[in]   appearance  The APPEARANCE value to add
+
+    \returns    ble_error_t
+
+    \retval     BLE_ERROR_NONE
+                Everything executed properly
+
+    \retval     BLE_ERROR_BUFFER_OVERFLOW
+                The specified data would cause the advertising buffer
+                to overflow
+
+    \par EXAMPLE
+
+    \code
+
+    \endcode
+*/
+/**************************************************************************/
+ble_error_t GapAdvertisingData::addAppearance(Appearance appearance)
+{
+    _appearance = appearance;
+    return addData(GapAdvertisingData::APPEARANCE, (uint8_t *)&appearance, 2);
+}
+
+/**************************************************************************/
+/*!
+    \brief  Helper function to add FLAGS data to the advertising
+            payload
+
+    \args[in]   flag  The FLAGS value to add
+
+                \par LE_LIMITED_DISCOVERABLE
+                The peripheral is discoverable for a limited period of
+                time
+
+                \par LE_GENERAL_DISCOVERABLE
+                The peripheral is permanently discoverable
+
+                \par BREDR_NOT_SUPPORTED
+                This peripheral is a Bluetooth Low Energy only device
+                (no EDR support)
+
+    \returns    ble_error_t
+
+    \retval     BLE_ERROR_NONE
+                Everything executed properly
+
+    \retval     BLE_ERROR_BUFFER_OVERFLOW
+                The specified data would cause the advertising buffer
+                to overflow
+
+    \par EXAMPLE
+
+    \code
+
+    \endcode
+*/
+/**************************************************************************/
+ble_error_t GapAdvertisingData::addFlags(uint8_t flags)
+{
+    return addData(GapAdvertisingData::FLAGS, &flags, 1);
+}
+
+/**************************************************************************/
+/*!
+    \brief  Helper function to add TX_POWER_LEVEL data to the
+            advertising payload
+
+    \args[in]   flag  The TX_POWER_LEVEL value to add
+
+    \returns    ble_error_t
+
+    \retval     BLE_ERROR_NONE
+                Everything executed properly
+
+    \retval     BLE_ERROR_BUFFER_OVERFLOW
+                The specified data would cause the advertising buffer
+                to overflow
+
+    \par EXAMPLE
+
+    \code
+
+    \endcode
+*/
+/**************************************************************************/
+ble_error_t GapAdvertisingData::addTxPower(int8_t txPower)
+{
+    /* ToDo: Basic error checking to make sure txPower is in range */
+    return addData(GapAdvertisingData::TX_POWER_LEVEL, (uint8_t *)&txPower, 1);
+}
+
+/**************************************************************************/
+/*!
+    \brief Clears the payload and resets the payload length counter
+*/
+/**************************************************************************/
+void GapAdvertisingData::clear(void)
+{
+    memset(&_payload, 0, GAP_ADVERTISING_DATA_MAX_PAYLOAD);
+    _payloadLen = 0;
+}
+
+/**************************************************************************/
+/*!
+    \brief Returns a pointer to the the current payload
+
+    \returns    A pointer to the payload
+*/
+/**************************************************************************/
+const uint8_t *GapAdvertisingData::getPayload(void) const
+{
+    return (_payloadLen > 0) ? _payload : NULL;
+}
+
+/**************************************************************************/
+/*!
+    \brief Returns the current payload length (0..31 bytes)
+
+    \returns    The payload length in bytes
+*/
+/**************************************************************************/
+uint8_t GapAdvertisingData::getPayloadLen(void) const
+{
+    return _payloadLen;
+}
+
+/**************************************************************************/
+/*!
+    \brief Returns the 16-bit appearance value for this device
+
+    \returns    The 16-bit appearance value
+*/
+/**************************************************************************/
+uint16_t GapAdvertisingData::getAppearance(void) const
+{
+    return (uint16_t)_appearance;
+}