Diff: oled.h

Revision:

1:0e75de2a5d21

Parent:

0:d8f4c441e032

Child:

2:6cd3b0947188

--- a/oled.h	Fri Jun 10 15:20:20 2016 +0000
+++ b/oled.h	Mon Jun 13 02:21:11 2016 +0000
@@ -1,77 +1,5 @@
-//#include <Wire.h>
-#include <U8glib.h>
-
-U8GLIB_SSD1306_MICRODUINO_128X64 u8g;     //设置OLED型号
-//-------字体设置，大、中、小
-#define setFont_L u8g.setFont(u8g_font_7x13)
-#define setFont_M u8g.setFont(u8g_font_fixed_v0r)
-#define setFont_S u8g.setFont(u8g_font_chikitar)
-
-//温度计图案
-const unsigned char bmp_tem[] U8G_PROGMEM = {
-    0xE0,0x81,0x30,0x83,0x10,0x82,0x10,0x82,0x10,0xFA,0x10,0x82,
-    0x10,0x82,0x10,0xFA,0x10,0x82,0xD0,0x82,0xD0,0xFA,0xD0,0x82,
-    0xD0,0x82,0xD0,0xFA,0xD0,0x82,0xD0,0x82,0xD0,0xFA,0xD0,0x82,
-    0xD0,0x82,0xD8,0x86,0xC4,0x88,0xF2,0x93,0xFB,0xB7,0xF9,0xA7,
-    0xFD,0xAF,0xFD,0xAF,0xF9,0xA7,0xFA,0x97,0xF2,0x93,0xC4,0x88,
-    0x18,0x86,0xF0,0x83
-};
-
-//水滴图案
-const unsigned char bmp_hum[] U8G_PROGMEM = {
-    0x00,0x00,0x01,0x00,0x00,0x01,0x00,0x80,0x03,0x08,0x80,0x03,0x18,0x80,0x07,0x1C,
-    0xC0,0x07,0x3C,0xC0,0x07,0x3E,0xE0,0x0F,0x3E,0xE0,0x0F,0x7A,0xF0,0x1F,0x7B,0xF8,
-    0x1F,0x72,0xF8,0x1F,0x3E,0xF8,0x3F,0x1C,0xFC,0x3F,0x00,0xFC,0x7F,0x00,0xFE,0x7F,
-    0x00,0xFE,0x7F,0x00,0xFE,0x7F,0x00,0xFF,0xFF,0x00,0xFF,0xFF,0x00,0xFF,0xFF,0x00,
-    0xF3,0xFF,0x00,0xF2,0x7F,0x00,0xE6,0x7F,0x00,0xC6,0x7F,0x00,0x0E,0x3F,0x00,0x3C,
-    0x1E,0x00,0xF8,0x1F,0x00,0xE0,0x07,0x00,0x80,0x01
-};
-
-void oled(float temp, float humi, float light, float pm25, float etoh)
-{
-    u8g.firstPage();
-    do {
-        u8g.setDefaultForegroundColor();
-
-        u8g.drawXBMP( 4, 1, 15, 32, bmp_tem);
-        u8g.drawXBMP( 70, 2, 24, 30, bmp_hum);
-
-        setFont_M;                             //设置字体为大
-        u8g.setPrintPos(20, 16);         //设置文字开始坐标
-        u8g.print("`C ");
-        setFont_L;                             //设置字体为大
-        u8g.setPrintPos(20, 32);         //设置文字开始坐标
-        u8g.print(temp , 1);             //温度
-
-        u8g.setPrintPos(100, 16);         //设置文字开始坐标
-        u8g.print("%");
-        setFont_L;                             //设置字体为大
-        u8g.setPrintPos(100, 32);         //设置文字开始坐标
-        u8g.print(humi , 0);             //湿度
-
-        setFont_L;                       //设置字体
-        u8g.setPrintPos(4, 49);          //设置文字开始坐标
-        u8g.print(light , 0);       //光照强度
-        setFont_M;                       //设置字体
-        u8g.print(" Lux");
-
-        setFont_L;                       //设置字体
-        u8g.setPrintPos(4, 63);          //设置文字开始坐标
-        u8g.print(pm25 , 0);       //光照强度
-        setFont_M;                       //设置字体
-        u8g.print(" ug/m3");
-
-
-        setFont_L;                       //设置字体
-        u8g.setPrintPos(80, 49);          //设置文字开始坐标
-        u8g.print(etoh , 0);       //光照强度
-        setFont_M;                       //设置字体
-        u8g.print(" ppm");
-
-        // setFont_M;                             //设置字体为大
-        // u8g.setPrintPos(80, 63);         //设置文字开始坐标
-        // u8g.print(" LED:");
-
-    } while( u8g.nextPage() );
-}
-
+#ifndef _OLED_H
+#define _OLED_H
+extern void oled_init(void);
+extern void oled(float temp, float humi, float light, float pm25, float etoh);
+#endif
\ No newline at end of file