Diff: oled.h

Revision:

0:d8f4c441e032

Child:

1:0e75de2a5d21

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/oled.h	Fri Jun 10 15:20:20 2016 +0000
@@ -0,0 +1,77 @@
+//#include <Wire.h>
+#include <U8glib.h>
+
+U8GLIB_SSD1306_MICRODUINO_128X64 u8g;     //设置OLED型号
+//-------字体设置，大、中、小
+#define setFont_L u8g.setFont(u8g_font_7x13)
+#define setFont_M u8g.setFont(u8g_font_fixed_v0r)
+#define setFont_S u8g.setFont(u8g_font_chikitar)
+
+//温度计图案
+const unsigned char bmp_tem[] U8G_PROGMEM = {
+    0xE0,0x81,0x30,0x83,0x10,0x82,0x10,0x82,0x10,0xFA,0x10,0x82,
+    0x10,0x82,0x10,0xFA,0x10,0x82,0xD0,0x82,0xD0,0xFA,0xD0,0x82,
+    0xD0,0x82,0xD0,0xFA,0xD0,0x82,0xD0,0x82,0xD0,0xFA,0xD0,0x82,
+    0xD0,0x82,0xD8,0x86,0xC4,0x88,0xF2,0x93,0xFB,0xB7,0xF9,0xA7,
+    0xFD,0xAF,0xFD,0xAF,0xF9,0xA7,0xFA,0x97,0xF2,0x93,0xC4,0x88,
+    0x18,0x86,0xF0,0x83
+};
+
+//水滴图案
+const unsigned char bmp_hum[] U8G_PROGMEM = {
+    0x00,0x00,0x01,0x00,0x00,0x01,0x00,0x80,0x03,0x08,0x80,0x03,0x18,0x80,0x07,0x1C,
+    0xC0,0x07,0x3C,0xC0,0x07,0x3E,0xE0,0x0F,0x3E,0xE0,0x0F,0x7A,0xF0,0x1F,0x7B,0xF8,
+    0x1F,0x72,0xF8,0x1F,0x3E,0xF8,0x3F,0x1C,0xFC,0x3F,0x00,0xFC,0x7F,0x00,0xFE,0x7F,
+    0x00,0xFE,0x7F,0x00,0xFE,0x7F,0x00,0xFF,0xFF,0x00,0xFF,0xFF,0x00,0xFF,0xFF,0x00,
+    0xF3,0xFF,0x00,0xF2,0x7F,0x00,0xE6,0x7F,0x00,0xC6,0x7F,0x00,0x0E,0x3F,0x00,0x3C,
+    0x1E,0x00,0xF8,0x1F,0x00,0xE0,0x07,0x00,0x80,0x01
+};
+
+void oled(float temp, float humi, float light, float pm25, float etoh)
+{
+    u8g.firstPage();
+    do {
+        u8g.setDefaultForegroundColor();
+
+        u8g.drawXBMP( 4, 1, 15, 32, bmp_tem);
+        u8g.drawXBMP( 70, 2, 24, 30, bmp_hum);
+
+        setFont_M;                             //设置字体为大
+        u8g.setPrintPos(20, 16);         //设置文字开始坐标
+        u8g.print("`C ");
+        setFont_L;                             //设置字体为大
+        u8g.setPrintPos(20, 32);         //设置文字开始坐标
+        u8g.print(temp , 1);             //温度
+
+        u8g.setPrintPos(100, 16);         //设置文字开始坐标
+        u8g.print("%");
+        setFont_L;                             //设置字体为大
+        u8g.setPrintPos(100, 32);         //设置文字开始坐标
+        u8g.print(humi , 0);             //湿度
+
+        setFont_L;                       //设置字体
+        u8g.setPrintPos(4, 49);          //设置文字开始坐标
+        u8g.print(light , 0);       //光照强度
+        setFont_M;                       //设置字体
+        u8g.print(" Lux");
+
+        setFont_L;                       //设置字体
+        u8g.setPrintPos(4, 63);          //设置文字开始坐标
+        u8g.print(pm25 , 0);       //光照强度
+        setFont_M;                       //设置字体
+        u8g.print(" ug/m3");
+
+
+        setFont_L;                       //设置字体
+        u8g.setPrintPos(80, 49);          //设置文字开始坐标
+        u8g.print(etoh , 0);       //光照强度
+        setFont_M;                       //设置字体
+        u8g.print(" ppm");
+
+        // setFont_M;                             //设置字体为大
+        // u8g.setPrintPos(80, 63);         //设置文字开始坐标
+        // u8g.print(" LED:");
+
+    } while( u8g.nextPage() );
+}
+