Przemysław Kochański / Maestro

Library for Pololu Maestro Servo Controller http://www.pololu.com/docs/0J40

Library for Pololu Maestro Servo Controller

Library docs: https://developer.mbed.org/users/kochansky/code/Maestro/docs/f374c7b60318/classMaestro.html

Example usage:

#include "mbed.h"
#include "Maestro.h"

Maestro maestro(PTC4,PTC3);

int main()
{
    maestro.setBaudRate(9600);

    // limit speed for each servo
    for (uint8_t i = 0; i < 17; i++) {
        maestro.setSpeed(i, 10);
    }

    while (true) {
       // set servo on channel 0 to 90 degrees
       maestro.setServoAngle(0, 90);
       wait(2);

        // set servo on channel 0 to 45 degrees
       maestro.setServoAngle(0, 45);
       wait(2);
    }
}

Serial commands based on manual: http://www.pololu.com/docs/0J40/5.e

Device pinout:

/media/uploads/kochansky/maestro.jpg

Diff: Maestro.cpp

Revision:
6:1d8357775b6d
Parent:
5:0fd491357750
Child:
7:18a57f597ec4
diff -r 0fd491357750 -r 1d8357775b6d Maestro.cpp
--- a/Maestro.cpp	Mon Jan 06 11:14:19 2014 +0000
+++ b/Maestro.cpp	Mon Jan 06 13:16:37 2014 +0000
@@ -33,7 +33,7 @@
     setTarget(channel, angle * 40 + 6000);
 }
 
-void Maestro::setMultipleTargets(uint8_t count, uint8_t firstChannel, uint16_t* targets)
+void Maestro::setMultipleTargets(uint8_t firstChannel, uint8_t count, uint16_t* targets)
 {
     serial.putc(SET_MULTIPLE_TARGETS);
     serial.putc(count);
@@ -46,15 +46,15 @@
     }
 }
 
-void Maestro::setServosAngles(uint8_t count, uint8_t firstChannel, int8_t* angles)
+void Maestro::setServosAngles(uint8_t firstChannel, uint8_t count, int8_t* angles)
 {
     uint16_t targets[count];
 
     for (uint8_t i = 0; i < count; i++) {
-        targets[i] = angles[i] * 40 + 6000;
+        targets[i] = 6000 + angles[i] * 40;
     }
 
-    setMultipleTargets(count, firstChannel, targets);
+    setMultipleTargets(firstChannel, count, targets);
 }
 
 void Maestro::setSpeed(uint8_t channel, uint16_t speed)