Diff: include/SSD1331.h

Revision:

0:6e810b5b40a3

Child:

1:b55525d2db34

diff -r 000000000000 -r 6e810b5b40a3 include/SSD1331.h
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/include/SSD1331.h	Tue Nov 10 22:51:46 2015 +0000
@@ -0,0 +1,185 @@
+/*
+* SSD1331.h
+* A library for RGB OLED module
+*
+* Copyright (c) 2014 seeed technology inc.
+* Copyright (c) 2012, Adafruit Industries.
+*
+* All rights reserved.
+*
+* This library is based on Adafruit's SSD1331-OLED-Driver-Library. Thanks to 
+* their contribution to the code, we modify it and add more interface to 
+* support our Seeed's Xadow RGB OLED 96*64 module.
+*
+* Below is the introduction of Adafruit's Color OLED module, we add it to here
+* to express our thanks to them.
+*
+* ****************************************************************************
+* This is a library for the 0.96" 16-bit Color OLED with SSD1331 driver chip
+*
+*  Pick one up today in the adafruit shop!
+*  ------> http://www.adafruit.com/products/684
+*
+* These displays use SPI to communicate.
+*
+* Adafruit invests time and resources providing this open source code, 
+* please support Adafruit and open-source hardware by purchasing 
+* products from Adafruit!
+*
+* Written by Limor Fried/Ladyada for Adafruit Industries.
+* Modifed by lawliet for Seeed Studio's RGB OLED module.
+* BSD license, all text above must be included in any redistribution
+* ******************************************************************************
+*
+* Software License Agreement (BSD License)
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+* 1. Redistributions of source code must retain the above copyright
+* notice, this list of conditions and the following disclaimer.
+* 2. Redistributions in binary form must reproduce the above copyright
+* notice, this list of conditions and the following disclaimer in the
+* documentation and/or other materials provided with the distribution.
+* 3. Neither the name of the copyright holders nor the
+* names of its contributors may be used to endorse or promote products
+* derived from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
+* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+*/
+
+#ifndef _SSD1331_H_
+#define _SSD1331_H_
+#include "DigitalOut.h"
+#include "PinNames.h"
+#include "SGL.h"
+
+namespace mbed 
+{
+    class DigitalOut;
+    class SPI;    
+}
+
+
+#define RGB_OLED_WIDTH                      96
+#define RGB_OLED_HEIGHT                     64
+
+#define CMD_DRAW_LINE                       0x21
+#define CMD_DRAW_RECTANGLE                  0x22
+#define CMD_COPY_WINDOW                     0x23
+#define CMD_DIM_WINDOW                      0x24
+#define CMD_CLEAR_WINDOW                    0x25
+#define CMD_FILL_WINDOW                     0x26
+    #define DISABLE_FILL    0x00
+    #define ENABLE_FILL     0x01
+#define CMD_CONTINUOUS_SCROLLING_SETUP      0x27
+#define CMD_DEACTIVE_SCROLLING              0x2E
+#define CMD_ACTIVE_SCROLLING                0x2F
+
+#define CMD_SET_COLUMN_ADDRESS              0x15
+#define CMD_SET_ROW_ADDRESS                 0x75
+#define CMD_SET_CONTRAST_A                  0x81
+#define CMD_SET_CONTRAST_B                  0x82
+#define CMD_SET_CONTRAST_C                  0x83
+#define CMD_MASTER_CURRENT_CONTROL          0x87
+#define CMD_SET_PRECHARGE_SPEED_A           0x8A
+#define CMD_SET_PRECHARGE_SPEED_B           0x8B
+#define CMD_SET_PRECHARGE_SPEED_C           0x8C
+#define CMD_SET_REMAP                       0xA0
+#define CMD_SET_DISPLAY_START_LINE          0xA1
+#define CMD_SET_DISPLAY_OFFSET              0xA2
+#define CMD_NORMAL_DISPLAY                  0xA4
+#define CMD_ENTIRE_DISPLAY_ON               0xA5
+#define CMD_ENTIRE_DISPLAY_OFF              0xA6
+#define CMD_INVERSE_DISPLAY                 0xA7
+#define CMD_SET_MULTIPLEX_RATIO             0xA8
+#define CMD_DIM_MODE_SETTING                0xAB
+#define CMD_SET_MASTER_CONFIGURE            0xAD
+#define CMD_DIM_MODE_DISPLAY_ON             0xAC
+#define CMD_DISPLAY_OFF                     0xAE
+#define CMD_NORMAL_BRIGHTNESS_DISPLAY_ON    0xAF
+#define CMD_POWER_SAVE_MODE                 0xB0
+#define CMD_PHASE_PERIOD_ADJUSTMENT         0xB1
+#define CMD_DISPLAY_CLOCK_DIV               0xB3
+#define CMD_SET_GRAy_SCALE_TABLE            0xB8
+#define CMD_ENABLE_LINEAR_GRAY_SCALE_TABLE  0xB9
+#define CMD_SET_PRECHARGE_VOLTAGE           0xBB
+#define CMD_SET_V_VOLTAGE                   0xBE
+
+#define RGB(R,G,B)                  (((R>>3)<<11) | ((G>>2)<<5) | (B>>3))
+
+#define LOW 0
+#define HIGH 1
+
+enum Color{
+    COLOR_BLACK     = RGB(  0,  0,  0), // black
+    COLOR_GREY      = RGB(192,192,192), // grey
+    COLOR_WHITE     = RGB(255,255,255), // white
+    COLOR_RED       = RGB(255,  0,  0), // red
+    COLOR_PINK      = RGB(255,192,203), // pink
+    COLOR_YELLOW    = RGB(255,255,  0), // yellow
+    COLOR_GOLDEN    = RGB(255,215,  0), // golden
+    COLOR_BROWN     = RGB(128, 42, 42), // brown
+    COLOR_BLUE      = RGB(  0,  0,255), // blue
+    COLOR_CYAN      = RGB(  0,255,255), // cyan
+    COLOR_GREEN     = RGB(  0,255,  0), // green
+    COLOR_PURPLE    = RGB(160, 32,240), // purple
+};
+
+enum DisplayMode{
+    //reset the above effect and turn the data to ON at the corresponding gray level.
+    NormalDisplay   = 0xA4,
+    //forces the entire display to be at "GS63"
+    DisplayOn       = 0xA5,
+    //forces the entire display to be at gray level "GS0"
+    DisplayOff      = 0xA6,
+    //swap the gray level of display data
+    InverseDisplay  = 0xA7
+};
+
+enum DisplayPower{
+    DimMode         = 0xAC,
+    SleepMode       = 0xAE,
+    NormalMode      = 0xAF
+};
+
+enum ScollingDirection{
+    Horizontal      = 0x00,
+    Vertical        = 0x01,
+    Diagonal        = 0x02
+};
+
+
+class SSD1331 : public virtual SGL {
+public:
+    SSD1331(PinName cs, PinName dc, PinName mosi, PinName sck);
+    void init(void);
+    virtual void drawPixel(uint16_t x, uint16_t y, uint16_t color);
+    virtual void drawLine(uint16_t x0, uint16_t y0, uint16_t x1, uint16_t y1, uint16_t color);
+    void drawFrame(uint16_t x0, uint16_t y0, uint16_t x1, uint16_t y1, uint16_t outColor, uint16_t fillColor);
+    void copyWindow(uint16_t x0, uint16_t y0, uint16_t x1, uint16_t y1,uint16_t x2, uint16_t y2);
+    void dimWindow(uint16_t x0, uint16_t y0, uint16_t x1, uint16_t y1);
+    void clearWindow(uint16_t x0, uint16_t y0, uint16_t x1, uint16_t y1);
+    void setScolling(ScollingDirection direction, uint8_t rowAddr, uint8_t rowNum, uint8_t timeInterval);
+    void enableScolling(bool enable);
+    void setDisplayMode(DisplayMode mode);
+    void setDisplayPower(DisplayPower power);
+private:
+    void _sendCmd(uint8_t cmd);
+    
+private:
+    mbed::DigitalOut* _cs;
+    mbed::DigitalOut* _dc;
+    mbed::SPI*        _spiPort;
+};
+
+#endif
\ No newline at end of file