File content as of revision 0:6e810b5b40a3:

/*
* SSD1331.h
* A library for RGB OLED module
*
* Copyright (c) 2014 seeed technology inc.
* Copyright (c) 2012, Adafruit Industries.
*
* All rights reserved.
*
* This library is based on Adafruit's SSD1331-OLED-Driver-Library. Thanks to 
* their contribution to the code, we modify it and add more interface to 
* support our Seeed's Xadow RGB OLED 96*64 module.
*
* Below is the introduction of Adafruit's Color OLED module, we add it to here
* to express our thanks to them.
*
* ****************************************************************************
* This is a library for the 0.96" 16-bit Color OLED with SSD1331 driver chip
*
*  Pick one up today in the adafruit shop!
*  ------> http://www.adafruit.com/products/684
*
* These displays use SPI to communicate.
*
* Adafruit invests time and resources providing this open source code, 
* please support Adafruit and open-source hardware by purchasing 
* products from Adafruit!
*
* Written by Limor Fried/Ladyada for Adafruit Industries.
* Modifed by lawliet for Seeed Studio's RGB OLED module.
* BSD license, all text above must be included in any redistribution
* ******************************************************************************
*
* Software License Agreement (BSD License)
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the copyright holders nor the
* names of its contributors may be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
*/

#ifndef _SSD1331_H_
#define _SSD1331_H_
#include "DigitalOut.h"
#include "PinNames.h"
#include "SGL.h"

namespace mbed 
{
    class DigitalOut;
    class SPI;    
}


#define RGB_OLED_WIDTH                      96
#define RGB_OLED_HEIGHT                     64

#define CMD_DRAW_LINE                       0x21
#define CMD_DRAW_RECTANGLE                  0x22
#define CMD_COPY_WINDOW                     0x23
#define CMD_DIM_WINDOW                      0x24
#define CMD_CLEAR_WINDOW                    0x25
#define CMD_FILL_WINDOW                     0x26
    #define DISABLE_FILL    0x00
    #define ENABLE_FILL     0x01
#define CMD_CONTINUOUS_SCROLLING_SETUP      0x27
#define CMD_DEACTIVE_SCROLLING              0x2E
#define CMD_ACTIVE_SCROLLING                0x2F

#define CMD_SET_COLUMN_ADDRESS              0x15
#define CMD_SET_ROW_ADDRESS                 0x75
#define CMD_SET_CONTRAST_A                  0x81
#define CMD_SET_CONTRAST_B                  0x82
#define CMD_SET_CONTRAST_C                  0x83
#define CMD_MASTER_CURRENT_CONTROL          0x87
#define CMD_SET_PRECHARGE_SPEED_A           0x8A
#define CMD_SET_PRECHARGE_SPEED_B           0x8B
#define CMD_SET_PRECHARGE_SPEED_C           0x8C
#define CMD_SET_REMAP                       0xA0
#define CMD_SET_DISPLAY_START_LINE          0xA1
#define CMD_SET_DISPLAY_OFFSET              0xA2
#define CMD_NORMAL_DISPLAY                  0xA4
#define CMD_ENTIRE_DISPLAY_ON               0xA5
#define CMD_ENTIRE_DISPLAY_OFF              0xA6
#define CMD_INVERSE_DISPLAY                 0xA7
#define CMD_SET_MULTIPLEX_RATIO             0xA8
#define CMD_DIM_MODE_SETTING                0xAB
#define CMD_SET_MASTER_CONFIGURE            0xAD
#define CMD_DIM_MODE_DISPLAY_ON             0xAC
#define CMD_DISPLAY_OFF                     0xAE
#define CMD_NORMAL_BRIGHTNESS_DISPLAY_ON    0xAF
#define CMD_POWER_SAVE_MODE                 0xB0
#define CMD_PHASE_PERIOD_ADJUSTMENT         0xB1
#define CMD_DISPLAY_CLOCK_DIV               0xB3
#define CMD_SET_GRAy_SCALE_TABLE            0xB8
#define CMD_ENABLE_LINEAR_GRAY_SCALE_TABLE  0xB9
#define CMD_SET_PRECHARGE_VOLTAGE           0xBB
#define CMD_SET_V_VOLTAGE                   0xBE

#define RGB(R,G,B)                  (((R>>3)<<11) | ((G>>2)<<5) | (B>>3))

#define LOW 0
#define HIGH 1

enum Color{
    COLOR_BLACK     = RGB(  0,  0,  0), // black
    COLOR_GREY      = RGB(192,192,192), // grey
    COLOR_WHITE     = RGB(255,255,255), // white
    COLOR_RED       = RGB(255,  0,  0), // red
    COLOR_PINK      = RGB(255,192,203), // pink
    COLOR_YELLOW    = RGB(255,255,  0), // yellow
    COLOR_GOLDEN    = RGB(255,215,  0), // golden
    COLOR_BROWN     = RGB(128, 42, 42), // brown
    COLOR_BLUE      = RGB(  0,  0,255), // blue
    COLOR_CYAN      = RGB(  0,255,255), // cyan
    COLOR_GREEN     = RGB(  0,255,  0), // green
    COLOR_PURPLE    = RGB(160, 32,240), // purple
};

enum DisplayMode{
    //reset the above effect and turn the data to ON at the corresponding gray level.
    NormalDisplay   = 0xA4,
    //forces the entire display to be at "GS63"
    DisplayOn       = 0xA5,
    //forces the entire display to be at gray level "GS0"
    DisplayOff      = 0xA6,
    //swap the gray level of display data
    InverseDisplay  = 0xA7
};

enum DisplayPower{
    DimMode         = 0xAC,
    SleepMode       = 0xAE,
    NormalMode      = 0xAF
};

enum ScollingDirection{
    Horizontal      = 0x00,
    Vertical        = 0x01,
    Diagonal        = 0x02
};


class SSD1331 : public virtual SGL {
public:
    SSD1331(PinName cs, PinName dc, PinName mosi, PinName sck);
    void init(void);
    virtual void drawPixel(uint16_t x, uint16_t y, uint16_t color);
    virtual void drawLine(uint16_t x0, uint16_t y0, uint16_t x1, uint16_t y1, uint16_t color);
    void drawFrame(uint16_t x0, uint16_t y0, uint16_t x1, uint16_t y1, uint16_t outColor, uint16_t fillColor);
    void copyWindow(uint16_t x0, uint16_t y0, uint16_t x1, uint16_t y1,uint16_t x2, uint16_t y2);
    void dimWindow(uint16_t x0, uint16_t y0, uint16_t x1, uint16_t y1);
    void clearWindow(uint16_t x0, uint16_t y0, uint16_t x1, uint16_t y1);
    void setScolling(ScollingDirection direction, uint8_t rowAddr, uint8_t rowNum, uint8_t timeInterval);
    void enableScolling(bool enable);
    void setDisplayMode(DisplayMode mode);
    void setDisplayPower(DisplayPower power);
private:
    void _sendCmd(uint8_t cmd);
    
private:
    mbed::DigitalOut* _cs;
    mbed::DigitalOut* _dc;
    mbed::SPI*        _spiPort;
};

#endif