Diff: netif/slipif.c

Revision:

0:51ac1d130fd4

diff -r 000000000000 -r 51ac1d130fd4 netif/slipif.c
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/netif/slipif.c	Fri Jun 22 09:25:39 2012 +0000
@@ -0,0 +1,367 @@
+/**
+ * @file
+ * SLIP Interface
+ *
+ */
+
+/*
+ * Copyright (c) 2001-2004 Swedish Institute of Computer Science.
+ * All rights reserved. 
+ *
+ * Redistribution and use in source and binary forms, with or without 
+ * modification, are permitted provided that the following conditions 
+ * are met: 
+ * 1. Redistributions of source code must retain the above copyright 
+ *    notice, this list of conditions and the following disclaimer. 
+ * 2. Redistributions in binary form must reproduce the above copyright 
+ *    notice, this list of conditions and the following disclaimer in the 
+ *    documentation and/or other materials provided with the distribution. 
+ * 3. Neither the name of the Institute nor the names of its contributors 
+ *    may be used to endorse or promote products derived from this software 
+ *    without specific prior written permission. 
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND 
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE 
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 
+ * SUCH DAMAGE. 
+ *
+ * This file is built upon the file: src/arch/rtxc/netif/sioslip.c
+ *
+ * Author: Magnus Ivarsson <magnus.ivarsson(at)volvo.com> 
+ */
+
+/* 
+ * This is an arch independent SLIP netif. The specific serial hooks must be
+ * provided by another file. They are sio_open, sio_read/sio_tryread and sio_send
+ */
+
+#include "netif/slipif.h"
+#include "lwip/opt.h"
+
+#if LWIP_HAVE_SLIPIF
+
+#include "lwip/def.h"
+#include "lwip/pbuf.h"
+#include "lwip/sys.h"
+#include "lwip/stats.h"
+#include "lwip/snmp.h"
+#include "lwip/sio.h"
+
+#define SLIP_BLOCK     1
+#define SLIP_DONTBLOCK 0
+
+#define SLIP_END     0300 /* 0xC0 */
+#define SLIP_ESC     0333 /* 0xDB */
+#define SLIP_ESC_END 0334 /* 0xDC */
+#define SLIP_ESC_ESC 0335 /* 0xDD */
+
+#define SLIP_MAX_SIZE 1500
+
+enum slipif_recv_state {
+    SLIP_RECV_NORMAL,
+    SLIP_RECV_ESCAPE,
+};
+
+struct slipif_priv {
+  sio_fd_t sd;
+  /* q is the whole pbuf chain for a packet, p is the current pbuf in the chain */
+  struct pbuf *p, *q;
+  enum slipif_recv_state state;
+  u16_t i, recved;
+};
+
+/**
+ * Send a pbuf doing the necessary SLIP encapsulation
+ *
+ * Uses the serial layer's sio_send()
+ *
+ * @param netif the lwip network interface structure for this slipif
+ * @param p the pbuf chaing packet to send
+ * @param ipaddr the ip address to send the packet to (not used for slipif)
+ * @return always returns ERR_OK since the serial layer does not provide return values
+ */
+err_t
+slipif_output(struct netif *netif, struct pbuf *p, ip_addr_t *ipaddr)
+{
+  struct slipif_priv *priv;
+  struct pbuf *q;
+  u16_t i;
+  u8_t c;
+
+  LWIP_ASSERT("netif != NULL", (netif != NULL));
+  LWIP_ASSERT("netif->state != NULL", (netif->state != NULL));
+  LWIP_ASSERT("p != NULL", (p != NULL));
+
+  LWIP_UNUSED_ARG(ipaddr);
+
+  priv = netif->state;
+
+  /* Send pbuf out on the serial I/O device. */
+  sio_send(SLIP_END, priv->sd);
+
+  for (q = p; q != NULL; q = q->next) {
+    for (i = 0; i < q->len; i++) {
+      c = ((u8_t *)q->payload)[i];
+      switch (c) {
+      case SLIP_END:
+        sio_send(SLIP_ESC, priv->sd);
+        sio_send(SLIP_ESC_END, priv->sd);
+        break;
+      case SLIP_ESC:
+        sio_send(SLIP_ESC, priv->sd);
+        sio_send(SLIP_ESC_ESC, priv->sd);
+        break;
+      default:
+        sio_send(c, priv->sd);
+        break;
+      }
+    }
+  }
+  sio_send(SLIP_END, priv->sd);
+  return ERR_OK;
+}
+
+/**
+ * Static function for easy use of blockig or non-blocking
+ * sio_read
+ *
+ * @param fd serial device handle
+ * @param data pointer to data buffer for receiving
+ * @param len maximum length (in bytes) of data to receive
+ * @param block if 1, call sio_read; if 0, call sio_tryread
+ * @return return value of sio_read of sio_tryread
+ */
+static u32_t
+slip_sio_read(sio_fd_t fd, u8_t* data, u32_t len, u8_t block)
+{
+  if (block) {
+    return sio_read(fd, data, len);
+  } else {
+    return sio_tryread(fd, data, len);
+  }
+}
+
+/**
+ * Handle the incoming SLIP stream character by character
+ *
+ * Poll the serial layer by calling sio_read() or sio_tryread().
+ *
+ * @param netif the lwip network interface structure for this slipif
+ * @param block if 1, block until data is received; if 0, return when all data
+ *        from the buffer is received (multiple calls to this function will
+ *        return a complete packet, NULL is returned before - used for polling)
+ * @return The IP packet when SLIP_END is received
+ */
+static struct pbuf *
+slipif_input(struct netif *netif, u8_t block)
+{
+  struct slipif_priv *priv;
+  u8_t c;
+  struct pbuf *t;
+
+  LWIP_ASSERT("netif != NULL", (netif != NULL));
+  LWIP_ASSERT("netif->state != NULL", (netif->state != NULL));
+
+  priv = netif->state;
+
+  while (slip_sio_read(priv->sd, &c, 1, block) > 0) {
+    switch (priv->state) {
+    case SLIP_RECV_NORMAL:
+      switch (c) {
+      case SLIP_END:
+        if (priv->recved > 0) {
+          /* Received whole packet. */
+          /* Trim the pbuf to the size of the received packet. */
+          pbuf_realloc(priv->q, priv->recved);
+
+          LINK_STATS_INC(link.recv);
+
+          LWIP_DEBUGF(SLIP_DEBUG, ("slipif: Got packet\n"));
+          t = priv->q;
+          priv->p = priv->q = NULL;
+          priv->i = priv->recved = 0;
+          return t;
+        }
+        continue;
+      case SLIP_ESC:
+        priv->state = SLIP_RECV_ESCAPE;
+        continue;
+      }
+      break;
+    case SLIP_RECV_ESCAPE:
+      switch (c) {
+      case SLIP_ESC_END:
+        c = SLIP_END;
+        break;
+      case SLIP_ESC_ESC:
+        c = SLIP_ESC;
+        break;
+      }
+      priv->state = SLIP_RECV_NORMAL;
+      /* FALLTHROUGH */
+    }
+
+    /* byte received, packet not yet completely received */
+    if (priv->p == NULL) {
+      /* allocate a new pbuf */
+      LWIP_DEBUGF(SLIP_DEBUG, ("slipif_input: alloc\n"));
+      priv->p = pbuf_alloc(PBUF_LINK, (PBUF_POOL_BUFSIZE - PBUF_LINK_HLEN), PBUF_POOL);
+
+      if (priv->p == NULL) {
+        LINK_STATS_INC(link.drop);
+        LWIP_DEBUGF(SLIP_DEBUG, ("slipif_input: no new pbuf! (DROP)\n"));
+        /* don't process any further since we got no pbuf to receive to */
+        break;
+      }
+
+      if (priv->q != NULL) {
+        /* 'chain' the pbuf to the existing chain */
+        pbuf_cat(priv->q, priv->p);
+      } else {
+        /* p is the first pbuf in the chain */
+        priv->q = priv->p;
+      }
+    }
+
+    /* this automatically drops bytes if > SLIP_MAX_SIZE */
+    if ((priv->p != NULL) && (priv->recved <= SLIP_MAX_SIZE)) {
+      ((u8_t *)priv->p->payload)[priv->i] = c;
+      priv->recved++;
+      priv->i++;
+      if (priv->i >= priv->p->len) {
+        /* on to the next pbuf */
+        priv->i = 0;
+        if (priv->p->next != NULL && priv->p->next->len > 0) {
+          /* p is a chain, on to the next in the chain */
+            priv->p = priv->p->next;
+        } else {
+          /* p is a single pbuf, set it to NULL so next time a new
+           * pbuf is allocated */
+            priv->p = NULL;
+        }
+      }
+    }
+  }
+
+  return NULL;
+}
+
+#if !NO_SYS
+/**
+ * The SLIP input thread.
+ *
+ * Feed the IP layer with incoming packets
+ *
+ * @param nf the lwip network interface structure for this slipif
+ */
+static void
+slipif_loop_thread(void *nf)
+{
+  struct pbuf *p;
+  struct netif *netif = (struct netif *)nf;
+
+  while (1) {
+    p = slipif_input(netif, SLIP_BLOCK);
+    if (p != NULL) {
+      if (netif->input(p, netif) != ERR_OK) {
+        pbuf_free(p);
+        p = NULL;
+      }
+    }
+  }
+}
+#endif /* !NO_SYS */
+
+/**
+ * SLIP netif initialization
+ *
+ * Call the arch specific sio_open and remember
+ * the opened device in the state field of the netif.
+ *
+ * @param netif the lwip network interface structure for this slipif
+ * @return ERR_OK if serial line could be opened,
+ *         ERR_MEM if no memory could be allocated,
+ *         ERR_IF is serial line couldn't be opened
+ *
+ * @note netif->num must contain the number of the serial port to open
+ *       (0 by default)
+ */
+err_t
+slipif_init(struct netif *netif)
+{
+  struct slipif_priv *priv;
+
+  LWIP_DEBUGF(SLIP_DEBUG, ("slipif_init: netif->num=%"U16_F"\n", (u16_t)netif->num));
+
+  /* Allocate private data */
+  priv = mem_malloc(sizeof(struct slipif_priv));
+  if (!priv) {
+    return ERR_MEM;
+  }
+
+  netif->name[0] = 's';
+  netif->name[1] = 'l';
+  netif->output = slipif_output;
+  netif->mtu = SLIP_MAX_SIZE;
+  netif->flags |= NETIF_FLAG_POINTTOPOINT;
+
+  /* Try to open the serial port (netif->num contains the port number). */
+  priv->sd = sio_open(netif->num);
+  if (!priv->sd) {
+    /* Opening the serial port failed. */
+    mem_free(priv);
+    return ERR_IF;
+  }
+
+  /* Initialize private data */
+  priv->p = NULL;
+  priv->q = NULL;
+  priv->state = SLIP_RECV_NORMAL;
+  priv->i = 0;
+  priv->recved = 0;
+
+  netif->state = priv;
+
+  /* initialize the snmp variables and counters inside the struct netif
+   * ifSpeed: no assumption can be made without knowing more about the
+   * serial line!
+   */
+  NETIF_INIT_SNMP(netif, snmp_ifType_slip, 0);
+
+  /* Create a thread to poll the serial line. */
+  sys_thread_new(SLIPIF_THREAD_NAME, slipif_loop_thread, netif,
+    SLIPIF_THREAD_STACKSIZE, SLIPIF_THREAD_PRIO);
+  return ERR_OK;
+}
+
+/**
+ * Polls the serial device and feeds the IP layer with incoming packets.
+ *
+ * @param netif The lwip network interface structure for this slipif
+ */
+void
+slipif_poll(struct netif *netif)
+{
+  struct pbuf *p;
+  struct slipif_priv *priv;
+
+  LWIP_ASSERT("netif != NULL", (netif != NULL));
+  LWIP_ASSERT("netif->state != NULL", (netif->state != NULL));
+
+  priv = netif->state;
+
+  while ((p = slipif_input(netif, SLIP_DONTBLOCK)) != NULL) {
+    if (netif->input(p, netif) != ERR_OK) {
+      pbuf_free(p);
+    }
+  }
+}
+
+#endif /* LWIP_HAVE_SLIPIF */