Diff: arch/lpc_emac_config.h

Revision:

1:0c9d93e2f51c

Parent:

0:f4db29eb9e47

Child:

3:dd8b8f5b449a

diff -r f4db29eb9e47 -r 0c9d93e2f51c arch/lpc_emac_config.h
--- a/arch/lpc_emac_config.h	Fri Jun 22 09:32:29 2012 +0000
+++ b/arch/lpc_emac_config.h	Fri Jun 22 11:17:21 2012 +0000
@@ -1,45 +1,45 @@
-/**********************************************************************
-* $Id$        lpc_emac_config.h            2011-11-20
-*//**
-* @file        lpc_emac_config.h
-* @brief    PHY and EMAC configuration file
-* @version    1.0
-* @date        20 Nov. 2011
-* @author    NXP MCU SW Application Team
-* 
-* Copyright(C) 2011, NXP Semiconductor
-* All rights reserved.
-*
-***********************************************************************
-* Software that is described herein is for illustrative purposes only
-* which provides customers with programming information regarding the
-* products. This software is supplied "AS IS" without any warranties.
-* NXP Semiconductors assumes no responsibility or liability for the
-* use of the software, conveys no license or title under any patent,
-* copyright, or mask work right to the product. NXP Semiconductors
-* reserves the right to make changes in the software without
-* notification. NXP Semiconductors also make no representation or
-* warranty that such application will be suitable for the specified
-* use without further testing or modification.
+/**********************************************************************
+* $Id$        lpc_emac_config.h            2011-11-20
+*//**
+* @file        lpc_emac_config.h
+* @brief    PHY and EMAC configuration file
+* @version    1.0
+* @date        20 Nov. 2011
+* @author    NXP MCU SW Application Team
+* 
+* Copyright(C) 2011, NXP Semiconductor
+* All rights reserved.
+*
+***********************************************************************
+* Software that is described herein is for illustrative purposes only
+* which provides customers with programming information regarding the
+* products. This software is supplied "AS IS" without any warranties.
+* NXP Semiconductors assumes no responsibility or liability for the
+* use of the software, conveys no license or title under any patent,
+* copyright, or mask work right to the product. NXP Semiconductors
+* reserves the right to make changes in the software without
+* notification. NXP Semiconductors also make no representation or
+* warranty that such application will be suitable for the specified
+* use without further testing or modification.
 **********************************************************************/
 
 #ifndef __LPC_EMAC_CONFIG_H
 #define __LPC_EMAC_CONFIG_H
 
 #include "lwip/opt.h"
-
+
 #ifdef __cplusplus
 extern "C"
 {
 #endif
-
-/** @defgroup lwip_phy_config    LWIP PHY configuration
- * @ingroup lwip_phy
- *
- * Configuration options for the PHY connected to the LPC EMAC.
- * @{
- */
-
+
+/** @defgroup lwip_phy_config    LWIP PHY configuration
+ * @ingroup lwip_phy
+ *
+ * Configuration options for the PHY connected to the LPC EMAC.
+ * @{
+ */
+
 /** \brief  The PHY address connected the to MII/RMII
  */
 #define LPC_PHYDEF_PHYADDR 1    /**< The PHY address on the PHY device. */
@@ -62,18 +62,18 @@
  *          operation if PHY_USE_AUTONEG is not enabled.
  */
 #define PHY_USE_100MBS 1 /**< Sets data rate to 100Mbps. */
-
-/**          
- * @}
+
+/**          
+ * @}
  */
-
-/** @defgroup lwip_emac_config    LWIP EMAC configuration
- * @ingroup lwip_emac
- *
- * Configuration options for the LPC EMAC.
- * @{
+
+/** @defgroup lwip_emac_config    LWIP EMAC configuration
+ * @ingroup lwip_emac
+ *
+ * Configuration options for the LPC EMAC.
+ * @{
  */
-
+
 /** \brief  Selects RMII or MII connection type in the EMAC peripheral
  */
 #define LPC_EMAC_RMII 1         /**< Use the RMII or MII driver variant .*/
@@ -87,21 +87,21 @@
  *          be a minimum value of 2.
  */
 #define LPC_NUM_BUFF_TXDESCS 3
-
-/** \brief  Set this define to 1 to enable bounce buffers for transmit pbufs
- *          that cannot be sent via the zero-copy method. Some chained pbufs
- *          may have a payload address that links to an area of memory that
- *          cannot be used for transmit DMA operations. If this define is
- *          set to 1, an extra check will be made with the pbufs. If a buffer
- *          is determined to be non-usable for zero-copy, a temporary bounce
- *          buffer will be created and used instead.
- */
-#define LPC_TX_PBUF_BOUNCE_EN 0
-
-/**          
- * @}
+
+/** \brief  Set this define to 1 to enable bounce buffers for transmit pbufs
+ *          that cannot be sent via the zero-copy method. Some chained pbufs
+ *          may have a payload address that links to an area of memory that
+ *          cannot be used for transmit DMA operations. If this define is
+ *          set to 1, an extra check will be made with the pbufs. If a buffer
+ *          is determined to be non-usable for zero-copy, a temporary bounce
+ *          buffer will be created and used instead.
  */
-
+#define LPC_TX_PBUF_BOUNCE_EN 1
+
+/**          
+ * @}
+ */
+
 #ifdef __cplusplus
 }
 #endif