![](/media/cache/img/default_profile.jpg.50x50_q85.jpg)
Quadcopter Attitude Control(Yaw-Pitch-Roll)
Diff: MPU6050_6Axis_MotionApps20.h
- Revision:
- 0:e63996fd7d3e
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/MPU6050_6Axis_MotionApps20.h Fri Jul 03 11:16:02 2015 +0000 @@ -0,0 +1,751 @@ +// I2Cdev library collection - MPU6050 I2C device class, 6-axis MotionApps 2.0 implementation +// Based on InvenSense MPU-6050 register map document rev. 2.0, 5/19/2011 (RM-MPU-6000A-00) +// 5/20/2013 by Jeff Rowberg <jeff@rowberg.net> +// Updates should (hopefully) always be available at https://github.com/jrowberg/i2cdevlib +// +// Changelog: +// ... - ongoing debug release + +/* ============================================ +I2Cdev device library code is placed under the MIT license +Copyright (c) 2012 Jeff Rowberg + +Permission is hereby granted, free of charge, to any person obtaining a copy +of this software and associated documentation files (the "Software"), to deal +in the Software without restriction, including without limitation the rights +to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +copies of the Software, and to permit persons to whom the Software is +furnished to do so, subject to the following conditions: + +The above copyright notice and this permission notice shall be included in +all copies or substantial portions of the Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER +LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, +OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN +THE SOFTWARE. +=============================================== +*/ +#ifndef _MPU6050_6AXIS_MOTIONAPPS20_H_ +#define _MPU6050_6AXIS_MOTIONAPPS20_H_ + +#include <iostream> + +#include "I2Cdev.h" +#include "helper_3dmath.h" + +// MotionApps 2.0 DMP implementation, built using the MPU-6050EVB evaluation board +#define MPU6050_INCLUDE_DMP_MOTIONAPPS20 + +#include "MPU6050.h" + +// Tom Carpenter's conditional PROGMEM code +// http://forum.arduino.cc/index.php?topic=129407.0 +#ifndef __arm__ + #include <avr/pgmspace.h> +#else + // Teensy 3.0 library conditional PROGMEM code from Paul Stoffregen + #ifndef __PGMSPACE_H_ + #define __PGMSPACE_H_ 1 + #include <inttypes.h> + + #define PROGMEM + #define PGM_P const char * + #define PSTR(str) (str) + #define F(x) x + + typedef void prog_void; + typedef char prog_char; + typedef unsigned char prog_uchar; + typedef int8_t prog_int8_t; + typedef uint8_t prog_uint8_t; + typedef int16_t prog_int16_t; + typedef uint16_t prog_uint16_t; + typedef int32_t prog_int32_t; + typedef uint32_t prog_uint32_t; + + #define strcpy_P(dest, src) strcpy((dest), (src)) + #define strcat_P(dest, src) strcat((dest), (src)) + #define strcmp_P(a, b) strcmp((a), (b)) + + #define pgm_read_byte(addr) (*(const unsigned char *)(addr)) + #define pgm_read_word(addr) (*(const unsigned short *)(addr)) + #define pgm_read_dword(addr) (*(const unsigned long *)(addr)) + #define pgm_read_float(addr) (*(const float *)(addr)) + + #define pgm_read_byte_near(addr) pgm_read_byte(addr) + #define pgm_read_word_near(addr) pgm_read_word(addr) + #define pgm_read_dword_near(addr) pgm_read_dword(addr) + #define pgm_read_float_near(addr) pgm_read_float(addr) + #define pgm_read_byte_far(addr) pgm_read_byte(addr) + #define pgm_read_word_far(addr) pgm_read_word(addr) + #define pgm_read_dword_far(addr) pgm_read_dword(addr) + #define pgm_read_float_far(addr) pgm_read_float(addr) + #endif +#endif + +/* Source is from the InvenSense MotionApps v2 demo code. Original source is + * unavailable, unless you happen to be amazing as decompiling binary by + * hand (in which case, please contact me, and I'm totally serious). + * + * Also, I'd like to offer many, many thanks to Noah Zerkin for all of the + * DMP reverse-engineering he did to help make this bit of wizardry + * possible. + */ + +// NOTE! Enabling DEBUG adds about 3.3kB to the flash program size. +// Debug output is now working even on ATMega328P MCUs (e.g. Arduino Uno) +// after moving string constants to flash memory storage using the F() +// compiler macro (Arduino IDE 1.0+ required). + +//#define DEBUG +#ifdef DEBUG + #define DEBUG_PRINT(x) pc.printf(x) //Serial.print(x) + #define DEBUG_PRINTF(x, y) pc.printf(x,y) //Serial.print(x, y) + + #define F(x) x +#else + #define DEBUG_PRINT(x) + #define DEBUG_PRINTF(x, y) + +#endif + +#define MPU6050_DMP_CODE_SIZE 1929 // dmpMemory[] +#define MPU6050_DMP_CONFIG_SIZE 192 // dmpConfig[] +#define MPU6050_DMP_UPDATES_SIZE 47 // dmpUpdates[] + +/* ================================================================================================ * + | Default MotionApps v2.0 42-byte FIFO packet structure: | + | | + | [QUAT W][ ][QUAT X][ ][QUAT Y][ ][QUAT Z][ ][GYRO X][ ][GYRO Y][ ] | + | 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 | + | | + | [GYRO Z][ ][ACC X ][ ][ACC Y ][ ][ACC Z ][ ][ ] | + | 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 | + * ================================================================================================ */ + +// this block of memory gets written to the MPU on start-up, and it seems +// to be volatile memory, so it has to be done each time (it only takes ~1 +// second though) +const unsigned char dmpMemory[MPU6050_DMP_CODE_SIZE] PROGMEM = { + // bank 0, 256 bytes + 0xFB, 0x00, 0x00, 0x3E, 0x00, 0x0B, 0x00, 0x36, 0x00, 0x01, 0x00, 0x02, 0x00, 0x03, 0x00, 0x00, + 0x00, 0x65, 0x00, 0x54, 0xFF, 0xEF, 0x00, 0x00, 0xFA, 0x80, 0x00, 0x0B, 0x12, 0x82, 0x00, 0x01, + 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x28, 0x00, 0x00, 0xFF, 0xFF, 0x45, 0x81, 0xFF, 0xFF, 0xFA, 0x72, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x03, 0xE8, 0x00, 0x00, 0x00, 0x01, 0x00, 0x01, 0x7F, 0xFF, 0xFF, 0xFE, 0x80, 0x01, + 0x00, 0x1B, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x3E, 0x03, 0x30, 0x40, 0x00, 0x00, 0x00, 0x02, 0xCA, 0xE3, 0x09, 0x3E, 0x80, 0x00, 0x00, + 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x00, 0x00, 0x60, 0x00, 0x00, 0x00, + 0x41, 0xFF, 0x00, 0x00, 0x00, 0x00, 0x0B, 0x2A, 0x00, 0x00, 0x16, 0x55, 0x00, 0x00, 0x21, 0x82, + 0xFD, 0x87, 0x26, 0x50, 0xFD, 0x80, 0x00, 0x00, 0x00, 0x1F, 0x00, 0x00, 0x00, 0x05, 0x80, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x03, 0x00, 0x00, + 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x04, 0x6F, 0x00, 0x02, 0x65, 0x32, 0x00, 0x00, 0x5E, 0xC0, + 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0xFB, 0x8C, 0x6F, 0x5D, 0xFD, 0x5D, 0x08, 0xD9, 0x00, 0x7C, 0x73, 0x3B, 0x00, 0x6C, 0x12, 0xCC, + 0x32, 0x00, 0x13, 0x9D, 0x32, 0x00, 0xD0, 0xD6, 0x32, 0x00, 0x08, 0x00, 0x40, 0x00, 0x01, 0xF4, + 0xFF, 0xE6, 0x80, 0x79, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0xD0, 0xD6, 0x00, 0x00, 0x27, 0x10, + + // bank 1, 256 bytes + 0xFB, 0x00, 0x00, 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x01, 0x00, 0x00, 0x00, + 0x00, 0x00, 0xFA, 0x36, 0xFF, 0xBC, 0x30, 0x8E, 0x00, 0x05, 0xFB, 0xF0, 0xFF, 0xD9, 0x5B, 0xC8, + 0xFF, 0xD0, 0x9A, 0xBE, 0x00, 0x00, 0x10, 0xA9, 0xFF, 0xF4, 0x1E, 0xB2, 0x00, 0xCE, 0xBB, 0xF7, + 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x04, 0x00, 0x02, 0x00, 0x02, 0x02, 0x00, 0x00, 0x0C, + 0xFF, 0xC2, 0x80, 0x00, 0x00, 0x01, 0x80, 0x00, 0x00, 0xCF, 0x80, 0x00, 0x40, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x06, 0x00, 0x00, 0x00, 0x00, 0x14, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x03, 0x3F, 0x68, 0xB6, 0x79, 0x35, 0x28, 0xBC, 0xC6, 0x7E, 0xD1, 0x6C, + 0x80, 0x00, 0x00, 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0xB2, 0x6A, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3F, 0xF0, 0x00, 0x00, 0x00, 0x30, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x25, 0x4D, 0x00, 0x2F, 0x70, 0x6D, 0x00, 0x00, 0x05, 0xAE, 0x00, 0x0C, 0x02, 0xD0, + + // bank 2, 256 bytes + 0x00, 0x00, 0x00, 0x00, 0x00, 0x65, 0x00, 0x54, 0xFF, 0xEF, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x01, 0x00, 0x00, 0x44, 0x00, 0x00, 0x00, 0x00, 0x0C, 0x00, 0x00, 0x00, 0x01, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x65, 0x00, 0x00, 0x00, 0x54, 0x00, 0x00, 0xFF, 0xEF, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x1B, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x00, 0x00, + 0x00, 0x1B, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + + // bank 3, 256 bytes + 0xD8, 0xDC, 0xBA, 0xA2, 0xF1, 0xDE, 0xB2, 0xB8, 0xB4, 0xA8, 0x81, 0x91, 0xF7, 0x4A, 0x90, 0x7F, + 0x91, 0x6A, 0xF3, 0xF9, 0xDB, 0xA8, 0xF9, 0xB0, 0xBA, 0xA0, 0x80, 0xF2, 0xCE, 0x81, 0xF3, 0xC2, + 0xF1, 0xC1, 0xF2, 0xC3, 0xF3, 0xCC, 0xA2, 0xB2, 0x80, 0xF1, 0xC6, 0xD8, 0x80, 0xBA, 0xA7, 0xDF, + 0xDF, 0xDF, 0xF2, 0xA7, 0xC3, 0xCB, 0xC5, 0xB6, 0xF0, 0x87, 0xA2, 0x94, 0x24, 0x48, 0x70, 0x3C, + 0x95, 0x40, 0x68, 0x34, 0x58, 0x9B, 0x78, 0xA2, 0xF1, 0x83, 0x92, 0x2D, 0x55, 0x7D, 0xD8, 0xB1, + 0xB4, 0xB8, 0xA1, 0xD0, 0x91, 0x80, 0xF2, 0x70, 0xF3, 0x70, 0xF2, 0x7C, 0x80, 0xA8, 0xF1, 0x01, + 0xB0, 0x98, 0x87, 0xD9, 0x43, 0xD8, 0x86, 0xC9, 0x88, 0xBA, 0xA1, 0xF2, 0x0E, 0xB8, 0x97, 0x80, + 0xF1, 0xA9, 0xDF, 0xDF, 0xDF, 0xAA, 0xDF, 0xDF, 0xDF, 0xF2, 0xAA, 0xC5, 0xCD, 0xC7, 0xA9, 0x0C, + 0xC9, 0x2C, 0x97, 0x97, 0x97, 0x97, 0xF1, 0xA9, 0x89, 0x26, 0x46, 0x66, 0xB0, 0xB4, 0xBA, 0x80, + 0xAC, 0xDE, 0xF2, 0xCA, 0xF1, 0xB2, 0x8C, 0x02, 0xA9, 0xB6, 0x98, 0x00, 0x89, 0x0E, 0x16, 0x1E, + 0xB8, 0xA9, 0xB4, 0x99, 0x2C, 0x54, 0x7C, 0xB0, 0x8A, 0xA8, 0x96, 0x36, 0x56, 0x76, 0xF1, 0xB9, + 0xAF, 0xB4, 0xB0, 0x83, 0xC0, 0xB8, 0xA8, 0x97, 0x11, 0xB1, 0x8F, 0x98, 0xB9, 0xAF, 0xF0, 0x24, + 0x08, 0x44, 0x10, 0x64, 0x18, 0xF1, 0xA3, 0x29, 0x55, 0x7D, 0xAF, 0x83, 0xB5, 0x93, 0xAF, 0xF0, + 0x00, 0x28, 0x50, 0xF1, 0xA3, 0x86, 0x9F, 0x61, 0xA6, 0xDA, 0xDE, 0xDF, 0xD9, 0xFA, 0xA3, 0x86, + 0x96, 0xDB, 0x31, 0xA6, 0xD9, 0xF8, 0xDF, 0xBA, 0xA6, 0x8F, 0xC2, 0xC5, 0xC7, 0xB2, 0x8C, 0xC1, + 0xB8, 0xA2, 0xDF, 0xDF, 0xDF, 0xA3, 0xDF, 0xDF, 0xDF, 0xD8, 0xD8, 0xF1, 0xB8, 0xA8, 0xB2, 0x86, + + // bank 4, 256 bytes + 0xB4, 0x98, 0x0D, 0x35, 0x5D, 0xB8, 0xAA, 0x98, 0xB0, 0x87, 0x2D, 0x35, 0x3D, 0xB2, 0xB6, 0xBA, + 0xAF, 0x8C, 0x96, 0x19, 0x8F, 0x9F, 0xA7, 0x0E, 0x16, 0x1E, 0xB4, 0x9A, 0xB8, 0xAA, 0x87, 0x2C, + 0x54, 0x7C, 0xB9, 0xA3, 0xDE, 0xDF, 0xDF, 0xA3, 0xB1, 0x80, 0xF2, 0xC4, 0xCD, 0xC9, 0xF1, 0xB8, + 0xA9, 0xB4, 0x99, 0x83, 0x0D, 0x35, 0x5D, 0x89, 0xB9, 0xA3, 0x2D, 0x55, 0x7D, 0xB5, 0x93, 0xA3, + 0x0E, 0x16, 0x1E, 0xA9, 0x2C, 0x54, 0x7C, 0xB8, 0xB4, 0xB0, 0xF1, 0x97, 0x83, 0xA8, 0x11, 0x84, + 0xA5, 0x09, 0x98, 0xA3, 0x83, 0xF0, 0xDA, 0x24, 0x08, 0x44, 0x10, 0x64, 0x18, 0xD8, 0xF1, 0xA5, + 0x29, 0x55, 0x7D, 0xA5, 0x85, 0x95, 0x02, 0x1A, 0x2E, 0x3A, 0x56, 0x5A, 0x40, 0x48, 0xF9, 0xF3, + 0xA3, 0xD9, 0xF8, 0xF0, 0x98, 0x83, 0x24, 0x08, 0x44, 0x10, 0x64, 0x18, 0x97, 0x82, 0xA8, 0xF1, + 0x11, 0xF0, 0x98, 0xA2, 0x24, 0x08, 0x44, 0x10, 0x64, 0x18, 0xDA, 0xF3, 0xDE, 0xD8, 0x83, 0xA5, + 0x94, 0x01, 0xD9, 0xA3, 0x02, 0xF1, 0xA2, 0xC3, 0xC5, 0xC7, 0xD8, 0xF1, 0x84, 0x92, 0xA2, 0x4D, + 0xDA, 0x2A, 0xD8, 0x48, 0x69, 0xD9, 0x2A, 0xD8, 0x68, 0x55, 0xDA, 0x32, 0xD8, 0x50, 0x71, 0xD9, + 0x32, 0xD8, 0x70, 0x5D, 0xDA, 0x3A, 0xD8, 0x58, 0x79, 0xD9, 0x3A, 0xD8, 0x78, 0x93, 0xA3, 0x4D, + 0xDA, 0x2A, 0xD8, 0x48, 0x69, 0xD9, 0x2A, 0xD8, 0x68, 0x55, 0xDA, 0x32, 0xD8, 0x50, 0x71, 0xD9, + 0x32, 0xD8, 0x70, 0x5D, 0xDA, 0x3A, 0xD8, 0x58, 0x79, 0xD9, 0x3A, 0xD8, 0x78, 0xA8, 0x8A, 0x9A, + 0xF0, 0x28, 0x50, 0x78, 0x9E, 0xF3, 0x88, 0x18, 0xF1, 0x9F, 0x1D, 0x98, 0xA8, 0xD9, 0x08, 0xD8, + 0xC8, 0x9F, 0x12, 0x9E, 0xF3, 0x15, 0xA8, 0xDA, 0x12, 0x10, 0xD8, 0xF1, 0xAF, 0xC8, 0x97, 0x87, + + // bank 5, 256 bytes + 0x34, 0xB5, 0xB9, 0x94, 0xA4, 0x21, 0xF3, 0xD9, 0x22, 0xD8, 0xF2, 0x2D, 0xF3, 0xD9, 0x2A, 0xD8, + 0xF2, 0x35, 0xF3, 0xD9, 0x32, 0xD8, 0x81, 0xA4, 0x60, 0x60, 0x61, 0xD9, 0x61, 0xD8, 0x6C, 0x68, + 0x69, 0xD9, 0x69, 0xD8, 0x74, 0x70, 0x71, 0xD9, 0x71, 0xD8, 0xB1, 0xA3, 0x84, 0x19, 0x3D, 0x5D, + 0xA3, 0x83, 0x1A, 0x3E, 0x5E, 0x93, 0x10, 0x30, 0x81, 0x10, 0x11, 0xB8, 0xB0, 0xAF, 0x8F, 0x94, + 0xF2, 0xDA, 0x3E, 0xD8, 0xB4, 0x9A, 0xA8, 0x87, 0x29, 0xDA, 0xF8, 0xD8, 0x87, 0x9A, 0x35, 0xDA, + 0xF8, 0xD8, 0x87, 0x9A, 0x3D, 0xDA, 0xF8, 0xD8, 0xB1, 0xB9, 0xA4, 0x98, 0x85, 0x02, 0x2E, 0x56, + 0xA5, 0x81, 0x00, 0x0C, 0x14, 0xA3, 0x97, 0xB0, 0x8A, 0xF1, 0x2D, 0xD9, 0x28, 0xD8, 0x4D, 0xD9, + 0x48, 0xD8, 0x6D, 0xD9, 0x68, 0xD8, 0xB1, 0x84, 0x0D, 0xDA, 0x0E, 0xD8, 0xA3, 0x29, 0x83, 0xDA, + 0x2C, 0x0E, 0xD8, 0xA3, 0x84, 0x49, 0x83, 0xDA, 0x2C, 0x4C, 0x0E, 0xD8, 0xB8, 0xB0, 0xA8, 0x8A, + 0x9A, 0xF5, 0x20, 0xAA, 0xDA, 0xDF, 0xD8, 0xA8, 0x40, 0xAA, 0xD0, 0xDA, 0xDE, 0xD8, 0xA8, 0x60, + 0xAA, 0xDA, 0xD0, 0xDF, 0xD8, 0xF1, 0x97, 0x86, 0xA8, 0x31, 0x9B, 0x06, 0x99, 0x07, 0xAB, 0x97, + 0x28, 0x88, 0x9B, 0xF0, 0x0C, 0x20, 0x14, 0x40, 0xB8, 0xB0, 0xB4, 0xA8, 0x8C, 0x9C, 0xF0, 0x04, + 0x28, 0x51, 0x79, 0x1D, 0x30, 0x14, 0x38, 0xB2, 0x82, 0xAB, 0xD0, 0x98, 0x2C, 0x50, 0x50, 0x78, + 0x78, 0x9B, 0xF1, 0x1A, 0xB0, 0xF0, 0x8A, 0x9C, 0xA8, 0x29, 0x51, 0x79, 0x8B, 0x29, 0x51, 0x79, + 0x8A, 0x24, 0x70, 0x59, 0x8B, 0x20, 0x58, 0x71, 0x8A, 0x44, 0x69, 0x38, 0x8B, 0x39, 0x40, 0x68, + 0x8A, 0x64, 0x48, 0x31, 0x8B, 0x30, 0x49, 0x60, 0xA5, 0x88, 0x20, 0x09, 0x71, 0x58, 0x44, 0x68, + + // bank 6, 256 bytes + 0x11, 0x39, 0x64, 0x49, 0x30, 0x19, 0xF1, 0xAC, 0x00, 0x2C, 0x54, 0x7C, 0xF0, 0x8C, 0xA8, 0x04, + 0x28, 0x50, 0x78, 0xF1, 0x88, 0x97, 0x26, 0xA8, 0x59, 0x98, 0xAC, 0x8C, 0x02, 0x26, 0x46, 0x66, + 0xF0, 0x89, 0x9C, 0xA8, 0x29, 0x51, 0x79, 0x24, 0x70, 0x59, 0x44, 0x69, 0x38, 0x64, 0x48, 0x31, + 0xA9, 0x88, 0x09, 0x20, 0x59, 0x70, 0xAB, 0x11, 0x38, 0x40, 0x69, 0xA8, 0x19, 0x31, 0x48, 0x60, + 0x8C, 0xA8, 0x3C, 0x41, 0x5C, 0x20, 0x7C, 0x00, 0xF1, 0x87, 0x98, 0x19, 0x86, 0xA8, 0x6E, 0x76, + 0x7E, 0xA9, 0x99, 0x88, 0x2D, 0x55, 0x7D, 0x9E, 0xB9, 0xA3, 0x8A, 0x22, 0x8A, 0x6E, 0x8A, 0x56, + 0x8A, 0x5E, 0x9F, 0xB1, 0x83, 0x06, 0x26, 0x46, 0x66, 0x0E, 0x2E, 0x4E, 0x6E, 0x9D, 0xB8, 0xAD, + 0x00, 0x2C, 0x54, 0x7C, 0xF2, 0xB1, 0x8C, 0xB4, 0x99, 0xB9, 0xA3, 0x2D, 0x55, 0x7D, 0x81, 0x91, + 0xAC, 0x38, 0xAD, 0x3A, 0xB5, 0x83, 0x91, 0xAC, 0x2D, 0xD9, 0x28, 0xD8, 0x4D, 0xD9, 0x48, 0xD8, + 0x6D, 0xD9, 0x68, 0xD8, 0x8C, 0x9D, 0xAE, 0x29, 0xD9, 0x04, 0xAE, 0xD8, 0x51, 0xD9, 0x04, 0xAE, + 0xD8, 0x79, 0xD9, 0x04, 0xD8, 0x81, 0xF3, 0x9D, 0xAD, 0x00, 0x8D, 0xAE, 0x19, 0x81, 0xAD, 0xD9, + 0x01, 0xD8, 0xF2, 0xAE, 0xDA, 0x26, 0xD8, 0x8E, 0x91, 0x29, 0x83, 0xA7, 0xD9, 0xAD, 0xAD, 0xAD, + 0xAD, 0xF3, 0x2A, 0xD8, 0xD8, 0xF1, 0xB0, 0xAC, 0x89, 0x91, 0x3E, 0x5E, 0x76, 0xF3, 0xAC, 0x2E, + 0x2E, 0xF1, 0xB1, 0x8C, 0x5A, 0x9C, 0xAC, 0x2C, 0x28, 0x28, 0x28, 0x9C, 0xAC, 0x30, 0x18, 0xA8, + 0x98, 0x81, 0x28, 0x34, 0x3C, 0x97, 0x24, 0xA7, 0x28, 0x34, 0x3C, 0x9C, 0x24, 0xF2, 0xB0, 0x89, + 0xAC, 0x91, 0x2C, 0x4C, 0x6C, 0x8A, 0x9B, 0x2D, 0xD9, 0xD8, 0xD8, 0x51, 0xD9, 0xD8, 0xD8, 0x79, + + // bank 7, 138 bytes (remainder) + 0xD9, 0xD8, 0xD8, 0xF1, 0x9E, 0x88, 0xA3, 0x31, 0xDA, 0xD8, 0xD8, 0x91, 0x2D, 0xD9, 0x28, 0xD8, + 0x4D, 0xD9, 0x48, 0xD8, 0x6D, 0xD9, 0x68, 0xD8, 0xB1, 0x83, 0x93, 0x35, 0x3D, 0x80, 0x25, 0xDA, + 0xD8, 0xD8, 0x85, 0x69, 0xDA, 0xD8, 0xD8, 0xB4, 0x93, 0x81, 0xA3, 0x28, 0x34, 0x3C, 0xF3, 0xAB, + 0x8B, 0xF8, 0xA3, 0x91, 0xB6, 0x09, 0xB4, 0xD9, 0xAB, 0xDE, 0xFA, 0xB0, 0x87, 0x9C, 0xB9, 0xA3, + 0xDD, 0xF1, 0xA3, 0xA3, 0xA3, 0xA3, 0x95, 0xF1, 0xA3, 0xA3, 0xA3, 0x9D, 0xF1, 0xA3, 0xA3, 0xA3, + 0xA3, 0xF2, 0xA3, 0xB4, 0x90, 0x80, 0xF2, 0xA3, 0xA3, 0xA3, 0xA3, 0xA3, 0xA3, 0xA3, 0xA3, 0xA3, + 0xA3, 0xB2, 0xA3, 0xA3, 0xA3, 0xA3, 0xA3, 0xA3, 0xB0, 0x87, 0xB5, 0x99, 0xF1, 0xA3, 0xA3, 0xA3, + 0x98, 0xF1, 0xA3, 0xA3, 0xA3, 0xA3, 0x97, 0xA3, 0xA3, 0xA3, 0xA3, 0xF3, 0x9B, 0xA3, 0xA3, 0xDC, + 0xB9, 0xA7, 0xF1, 0x26, 0x26, 0x26, 0xD8, 0xD8, 0xFF +}; + +// thanks to Noah Zerkin for piecing this stuff together! +const unsigned char dmpConfig[MPU6050_DMP_CONFIG_SIZE] PROGMEM = { +// BANK OFFSET LENGTH [DATA] + 0x03, 0x7B, 0x03, 0x4C, 0xCD, 0x6C, // FCFG_1 inv_set_gyro_calibration + 0x03, 0xAB, 0x03, 0x36, 0x56, 0x76, // FCFG_3 inv_set_gyro_calibration + 0x00, 0x68, 0x04, 0x02, 0xCB, 0x47, 0xA2, // D_0_104 inv_set_gyro_calibration + 0x02, 0x18, 0x04, 0x00, 0x05, 0x8B, 0xC1, // D_0_24 inv_set_gyro_calibration + 0x01, 0x0C, 0x04, 0x00, 0x00, 0x00, 0x00, // D_1_152 inv_set_accel_calibration + 0x03, 0x7F, 0x06, 0x0C, 0xC9, 0x2C, 0x97, 0x97, 0x97, // FCFG_2 inv_set_accel_calibration + 0x03, 0x89, 0x03, 0x26, 0x46, 0x66, // FCFG_7 inv_set_accel_calibration + 0x00, 0x6C, 0x02, 0x20, 0x00, // D_0_108 inv_set_accel_calibration + 0x02, 0x40, 0x04, 0x00, 0x00, 0x00, 0x00, // CPASS_MTX_00 inv_set_compass_calibration + 0x02, 0x44, 0x04, 0x00, 0x00, 0x00, 0x00, // CPASS_MTX_01 + 0x02, 0x48, 0x04, 0x00, 0x00, 0x00, 0x00, // CPASS_MTX_02 + 0x02, 0x4C, 0x04, 0x00, 0x00, 0x00, 0x00, // CPASS_MTX_10 + 0x02, 0x50, 0x04, 0x00, 0x00, 0x00, 0x00, // CPASS_MTX_11 + 0x02, 0x54, 0x04, 0x00, 0x00, 0x00, 0x00, // CPASS_MTX_12 + 0x02, 0x58, 0x04, 0x00, 0x00, 0x00, 0x00, // CPASS_MTX_20 + 0x02, 0x5C, 0x04, 0x00, 0x00, 0x00, 0x00, // CPASS_MTX_21 + 0x02, 0xBC, 0x04, 0x00, 0x00, 0x00, 0x00, // CPASS_MTX_22 + 0x01, 0xEC, 0x04, 0x00, 0x00, 0x40, 0x00, // D_1_236 inv_apply_endian_accel + 0x03, 0x7F, 0x06, 0x0C, 0xC9, 0x2C, 0x97, 0x97, 0x97, // FCFG_2 inv_set_mpu_sensors + 0x04, 0x02, 0x03, 0x0D, 0x35, 0x5D, // CFG_MOTION_BIAS inv_turn_on_bias_from_no_motion + 0x04, 0x09, 0x04, 0x87, 0x2D, 0x35, 0x3D, // FCFG_5 inv_set_bias_update + 0x00, 0xA3, 0x01, 0x00, // D_0_163 inv_set_dead_zone + // SPECIAL 0x01 = enable interrupts + 0x00, 0x00, 0x00, 0x01, // SET INT_ENABLE at i=22, SPECIAL INSTRUCTION + 0x07, 0x86, 0x01, 0xFE, // CFG_6 inv_set_fifo_interupt + 0x07, 0x41, 0x05, 0xF1, 0x20, 0x28, 0x30, 0x38, // CFG_8 inv_send_quaternion + 0x07, 0x7E, 0x01, 0x30, // CFG_16 inv_set_footer + 0x07, 0x46, 0x01, 0x9A, // CFG_GYRO_SOURCE inv_send_gyro + 0x07, 0x47, 0x04, 0xF1, 0x28, 0x30, 0x38, // CFG_9 inv_send_gyro -> inv_construct3_fifo + 0x07, 0x6C, 0x04, 0xF1, 0x28, 0x30, 0x38, // CFG_12 inv_send_accel -> inv_construct3_fifo + 0x02, 0x16, 0x02, 0x00, 0x01 // D_0_22 inv_set_fifo_rate + + // This very last 0x01 WAS a 0x09, which drops the FIFO rate down to 20 Hz. 0x07 is 25 Hz, + // 0x01 is 100Hz. Going faster than 100Hz (0x00=200Hz) tends to result in very noisy data. + // DMP output frequency is calculated easily using this equation: (200Hz / (1 + value)) + + // It is important to make sure the host processor can keep up with reading and processing + // the FIFO output at the desired rate. Handling FIFO overflow cleanly is also a good idea. +}; + +const unsigned char dmpUpdates[MPU6050_DMP_UPDATES_SIZE] PROGMEM = { + 0x01, 0xB2, 0x02, 0xFF, 0xFF, + 0x01, 0x90, 0x04, 0x09, 0x23, 0xA1, 0x35, + 0x01, 0x6A, 0x02, 0x06, 0x00, + 0x01, 0x60, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x60, 0x04, 0x40, 0x00, 0x00, 0x00, + 0x01, 0x62, 0x02, 0x00, 0x00, + 0x00, 0x60, 0x04, 0x00, 0x40, 0x00, 0x00 +}; + +uint8_t MPU6050::dmpInitialize() { + // reset device + Serial pc(USBTX, USBRX); // tx, rx + pc.baud(115200); + wait_ms(50); + + pc.printf("\n\nSet USB Baudrate to 115200...\n"); + + pc.printf("\n\nResetting MPU6050...\n"); + reset(); + + wait_ms(30); + + // enable sleep mode and wake cycle + /*Serial.println(F("Enabling sleep mode...")); + setSleepEnabled(true); + Serial.println(F("Enabling wake cycle...")); + setWakeCycleEnabled(true);*/ + + // disable sleep mode + DEBUG_PRINT("Disabling sleep mode...\n"); + setSleepEnabled(false); + + // get MPU hardware revision + DEBUG_PRINT("Selecting user bank 16...\n"); + setMemoryBank(0x10, true, true); + DEBUG_PRINT("Selecting memory byte 6...\n"); + setMemoryStartAddress(0x06); + DEBUG_PRINT("Checking hardware revision...\n"); + uint8_t hwRevision = readMemoryByte(); + DEBUG_PRINT("Revision @ user[16][6] = "); + DEBUG_PRINTF("%x\n",hwRevision); + DEBUG_PRINT("Resetting memory bank selection to 0...\n"); + setMemoryBank(0, false, false); + + // check OTP bank valid + DEBUG_PRINT("Reading OTP bank valid flag...\n"); + uint8_t otpValid = getOTPBankValid(); + + DEBUG_PRINT("OTP bank is "); + if(otpValid) DEBUG_PRINT("valid!\n"); + else DEBUG_PRINT("invalid!\n"); + + // get X/Y/Z gyro offsets + /* + DEBUG_PRINT("\nReading gyro offset TC values...\n"); + int8_t xgOffsetTC = mpu.getXGyroOffsetTC(); + int8_t ygOffsetTC = getYGyroOffsetTC(); + int8_t zgOffsetTC = getZGyroOffsetTC(); + DEBUG_PRINTF("X gyro offset = %u\n",xgOffset); + DEBUG_PRINTF("Y gyro offset = %u\n",ygOffset); + DEBUG_PRINTF("Z gyro offset = %u\n",zgOffset); + */ + // setup weird slave stuff (?) + DEBUG_PRINT("Setting slave 0 address to 0x7F...\n"); + setSlaveAddress(0, 0x7F); + + DEBUG_PRINT("Disabling I2C Master mode..."); + setI2CMasterModeEnabled(false); + DEBUG_PRINT("Setting slave 0 address to 0x68 (self)..."); + setSlaveAddress(0, 0x68); + DEBUG_PRINT("Resetting I2C Master control...\n"); + resetI2CMaster(); + + wait_ms(20); + + // load DMP code into memory banks + DEBUG_PRINT("Writing DMP code to MPU memory banks ("); + DEBUG_PRINTF("%u",MPU6050_DMP_CODE_SIZE); + DEBUG_PRINT(" bytes)\n"); + if (writeProgMemoryBlock(dmpMemory, MPU6050_DMP_CODE_SIZE)) { + DEBUG_PRINT("Success! DMP code written and verified.\n"); + + // write DMP configuration + DEBUG_PRINT("Writing DMP configuration to MPU memory banks ("); + DEBUG_PRINTF("%u",MPU6050_DMP_CONFIG_SIZE); + DEBUG_PRINT(" bytes in config def)\n"); + if (writeProgDMPConfigurationSet(dmpConfig, MPU6050_DMP_CONFIG_SIZE)) { + DEBUG_PRINT("Success! DMP configuration written and verified.\n"); + + DEBUG_PRINT("Setting clock source to Z Gyro...\n"); + setClockSource(MPU6050_CLOCK_PLL_ZGYRO); + + DEBUG_PRINT("Setting DMP and FIFO_OFLOW interrupts enabled...\n"); + setIntEnabled(0x12); + + DEBUG_PRINT("Setting sample rate to 200Hz..."); + setRate(4); // 1khz / (1 + 4) = 200 Hz + + DEBUG_PRINT("Setting external frame sync to TEMP_OUT_L[0]...\n"); + setExternalFrameSync(MPU6050_EXT_SYNC_TEMP_OUT_L); + + DEBUG_PRINT("Setting DLPF bandwidth to 42Hz...\n"); + setDLPFMode(MPU6050_DLPF_BW_42); + + DEBUG_PRINT("Setting gyro sensitivity to +/- 2000 deg/sec...\n"); + setFullScaleGyroRange(MPU6050_GYRO_FS_2000); + + DEBUG_PRINT("Setting DMP configuration bytes (function unknown)...\n"); + setDMPConfig1(0x03); + setDMPConfig2(0x00); + + DEBUG_PRINT("Clearing OTP Bank flag..."); + setOTPBankValid(false); + + DEBUG_PRINT("Setting X/Y/Z gyro offset TCs to previous values...\n"); + //setXGyroOffsetTC(xgOffsetTC); + //setYGyroOffsetTC(ygOffsetTC); + //setZGyroOffsetTC(zgOffsetTC); + + //DEBUG_PRINTLN(F("Setting X/Y/Z gyro user offsets to zero...")); + //setXGyroOffset(0); + //setYGyroOffset(0); + //setZGyroOffset(0); + + DEBUG_PRINT("Writing final memory update 1/7 (function unknown)...\n"); + uint8_t dmpUpdate[16], j; + uint16_t pos = 0; + for (j = 0; j < 4 || j < dmpUpdate[2] + 3; j++, pos++) dmpUpdate[j] = pgm_read_byte(&dmpUpdates[pos]); + writeMemoryBlock(dmpUpdate + 3, dmpUpdate[2], dmpUpdate[0], dmpUpdate[1]); + + DEBUG_PRINT("Writing final memory update 2/7 (function unknown)...\n"); + for (j = 0; j < 4 || j < dmpUpdate[2] + 3; j++, pos++) dmpUpdate[j] = pgm_read_byte(&dmpUpdates[pos]); + writeMemoryBlock(dmpUpdate + 3, dmpUpdate[2], dmpUpdate[0], dmpUpdate[1]); + + DEBUG_PRINT("Resetting FIFO...\n"); + resetFIFO(); + + DEBUG_PRINT("Reading FIFO count...\n"); + uint16_t fifoCount = getFIFOCount(); + uint8_t fifoBuffer[128]; + + DEBUG_PRINT("Current FIFO count="); + DEBUG_PRINTF("%u\n",fifoCount); + getFIFOBytes(fifoBuffer, fifoCount); + + DEBUG_PRINT("Setting motion detection threshold to 2...\n"); + setMotionDetectionThreshold(2); + + DEBUG_PRINT("Setting zero-motion detection threshold to 156...\n"); + setZeroMotionDetectionThreshold(156); + + DEBUG_PRINT("Setting motion detection duration to 80..."); + setMotionDetectionDuration(80); + + DEBUG_PRINT("Setting zero-motion detection duration to 0..."); + setZeroMotionDetectionDuration(0); + + DEBUG_PRINT("Resetting FIFO...\n"); + resetFIFO(); + + DEBUG_PRINT("Enabling FIFO...\n"); + setFIFOEnabled(true); + + DEBUG_PRINT("Enabling DMP...\n"); + setDMPEnabled(true); + + DEBUG_PRINT("Resetting DMP...\n"); + resetDMP(); + + DEBUG_PRINT("Writing final memory update 3/7 (function unknown)...\n"); + for (j = 0; j < 4 || j < dmpUpdate[2] + 3; j++, pos++) dmpUpdate[j] = pgm_read_byte(&dmpUpdates[pos]); + writeMemoryBlock(dmpUpdate + 3, dmpUpdate[2], dmpUpdate[0], dmpUpdate[1]); + + DEBUG_PRINT("Writing final memory update 4/7 (function unknown)...\n"); + for (j = 0; j < 4 || j < dmpUpdate[2] + 3; j++, pos++) dmpUpdate[j] = pgm_read_byte(&dmpUpdates[pos]); + writeMemoryBlock(dmpUpdate + 3, dmpUpdate[2], dmpUpdate[0], dmpUpdate[1]); + + DEBUG_PRINT("Writing final memory update 5/7 (function unknown)...\n"); + for (j = 0; j < 4 || j < dmpUpdate[2] + 3; j++, pos++) dmpUpdate[j] = pgm_read_byte(&dmpUpdates[pos]); + writeMemoryBlock(dmpUpdate + 3, dmpUpdate[2], dmpUpdate[0], dmpUpdate[1]); + + DEBUG_PRINT("Waiting for FIFO count > 2...\n"); + while ((fifoCount = getFIFOCount()) < 3); + + DEBUG_PRINT("Current FIFO count="); + DEBUG_PRINTF("%u\n",fifoCount); + DEBUG_PRINT("Reading FIFO data...\n"); + getFIFOBytes(fifoBuffer, fifoCount); + + DEBUG_PRINT("Reading interrupt status...\n"); + uint8_t mpuIntStatus = getIntStatus(); + + DEBUG_PRINT("Current interrupt status="); + DEBUG_PRINTF("%x\n",mpuIntStatus); + + DEBUG_PRINT("Reading final memory update 6/7 (function unknown)...\n"); + for (j = 0; j < 4 || j < dmpUpdate[2] + 3; j++, pos++) dmpUpdate[j] = pgm_read_byte(&dmpUpdates[pos]); + readMemoryBlock(dmpUpdate + 3, dmpUpdate[2], dmpUpdate[0], dmpUpdate[1]); + + DEBUG_PRINT("Waiting for FIFO count > 2...\n"); + while ((fifoCount = getFIFOCount()) < 3); + + DEBUG_PRINT("Current FIFO count="); + DEBUG_PRINTF("%u\n",fifoCount); + + DEBUG_PRINT("Reading FIFO data...\n"); + getFIFOBytes(fifoBuffer, fifoCount); + + DEBUG_PRINT("Reading interrupt status...\n"); + mpuIntStatus = getIntStatus(); + + DEBUG_PRINT("Current interrupt status="); + DEBUG_PRINTF("%x\n",mpuIntStatus); + + DEBUG_PRINT("Writing final memory update 7/7 (function unknown)..."); + for (j = 0; j < 4 || j < dmpUpdate[2] + 3; j++, pos++) dmpUpdate[j] = pgm_read_byte(&dmpUpdates[pos]); + writeMemoryBlock(dmpUpdate + 3, dmpUpdate[2], dmpUpdate[0], dmpUpdate[1]); + + DEBUG_PRINT("DMP is good to go! Finally.\n"); + + DEBUG_PRINT("Disabling DMP (you turn it on later)...\n"); + setDMPEnabled(false); + + DEBUG_PRINT("Setting up internal 42-byte (default) DMP packet buffer...\n"); + dmpPacketSize = 42; + /*if ((dmpPacketBuffer = (uint8_t *)malloc(42)) == 0) { + return 3; // TODO: proper error code for no memory + }*/ + + DEBUG_PRINT("Resetting FIFO and clearing INT status one last time...\n"); + resetFIFO(); + getIntStatus(); + } else { + DEBUG_PRINT("ERROR! DMP configuration verification failed.\n"); + return 2; // configuration block loading failed + } + } else { + DEBUG_PRINT("ERROR! DMP code verification failed."); + return 1; // main binary block loading failed + } + return 0; // success +} + +bool MPU6050::dmpPacketAvailable() { + return getFIFOCount() >= dmpGetFIFOPacketSize(); +} + +// uint8_t MPU6050::dmpSetFIFORate(uint8_t fifoRate); +// uint8_t MPU6050::dmpGetFIFORate(); +// uint8_t MPU6050::dmpGetSampleStepSizeMS(); +// uint8_t MPU6050::dmpGetSampleFrequency(); +// int32_t MPU6050::dmpDecodeTemperature(int8_t tempReg); + +//uint8_t MPU6050::dmpRegisterFIFORateProcess(inv_obj_func func, int16_t priority); +//uint8_t MPU6050::dmpUnregisterFIFORateProcess(inv_obj_func func); +//uint8_t MPU6050::dmpRunFIFORateProcesses(); + +// uint8_t MPU6050::dmpSendQuaternion(uint_fast16_t accuracy); +// uint8_t MPU6050::dmpSendGyro(uint_fast16_t elements, uint_fast16_t accuracy); +// uint8_t MPU6050::dmpSendAccel(uint_fast16_t elements, uint_fast16_t accuracy); +// uint8_t MPU6050::dmpSendLinearAccel(uint_fast16_t elements, uint_fast16_t accuracy); +// uint8_t MPU6050::dmpSendLinearAccelInWorld(uint_fast16_t elements, uint_fast16_t accuracy); +// uint8_t MPU6050::dmpSendControlData(uint_fast16_t elements, uint_fast16_t accuracy); +// uint8_t MPU6050::dmpSendSensorData(uint_fast16_t elements, uint_fast16_t accuracy); +// uint8_t MPU6050::dmpSendExternalSensorData(uint_fast16_t elements, uint_fast16_t accuracy); +// uint8_t MPU6050::dmpSendGravity(uint_fast16_t elements, uint_fast16_t accuracy); +// uint8_t MPU6050::dmpSendPacketNumber(uint_fast16_t accuracy); +// uint8_t MPU6050::dmpSendQuantizedAccel(uint_fast16_t elements, uint_fast16_t accuracy); +// uint8_t MPU6050::dmpSendEIS(uint_fast16_t elements, uint_fast16_t accuracy); + +uint8_t MPU6050::dmpGetAccel(int32_t *data, const uint8_t* packet) { + // TODO: accommodate different arrangements of sent data (ONLY default supported now) + if (packet == 0) packet = dmpPacketBuffer; + data[0] = ((packet[28] << 24) + (packet[29] << 16) + (packet[30] << 8) + packet[31]); + data[1] = ((packet[32] << 24) + (packet[33] << 16) + (packet[34] << 8) + packet[35]); + data[2] = ((packet[36] << 24) + (packet[37] << 16) + (packet[38] << 8) + packet[39]); + return 0; +} +uint8_t MPU6050::dmpGetAccel(int16_t *data, const uint8_t* packet) { + // TODO: accommodate different arrangements of sent data (ONLY default supported now) + if (packet == 0) packet = dmpPacketBuffer; + data[0] = (packet[28] << 8) + packet[29]; + data[1] = (packet[32] << 8) + packet[33]; + data[2] = (packet[36] << 8) + packet[37]; + return 0; +} +uint8_t MPU6050::dmpGetAccel(VectorInt16 *v, const uint8_t* packet) { + // TODO: accommodate different arrangements of sent data (ONLY default supported now) + if (packet == 0) packet = dmpPacketBuffer; + v -> x = (packet[28] << 8) + packet[29]; + v -> y = (packet[32] << 8) + packet[33]; + v -> z = (packet[36] << 8) + packet[37]; + return 0; +} +uint8_t MPU6050::dmpGetQuaternion(int32_t *data, const uint8_t* packet) { + // TODO: accommodate different arrangements of sent data (ONLY default supported now) + if (packet == 0) packet = dmpPacketBuffer; + data[0] = ((packet[0] << 24) + (packet[1] << 16) + (packet[2] << 8) + packet[3]); + data[1] = ((packet[4] << 24) + (packet[5] << 16) + (packet[6] << 8) + packet[7]); + data[2] = ((packet[8] << 24) + (packet[9] << 16) + (packet[10] << 8) + packet[11]); + data[3] = ((packet[12] << 24) + (packet[13] << 16) + (packet[14] << 8) + packet[15]); + return 0; +} +uint8_t MPU6050::dmpGetQuaternion(int16_t *data, const uint8_t* packet) { + // TODO: accommodate different arrangements of sent data (ONLY default supported now) + if (packet == 0) packet = dmpPacketBuffer; + data[0] = ((packet[0] << 8) + packet[1]); + data[1] = ((packet[4] << 8) + packet[5]); + data[2] = ((packet[8] << 8) + packet[9]); + data[3] = ((packet[12] << 8) + packet[13]); + return 0; +} +uint8_t MPU6050::dmpGetQuaternion(Quaternion *q, const uint8_t* packet) { + // TODO: accommodate different arrangements of sent data (ONLY default supported now) + int16_t qI[4]; + uint8_t status = dmpGetQuaternion(qI, packet); + if (status == 0) { + q -> w = (float)qI[0] / 16384.0f; + q -> x = (float)qI[1] / 16384.0f; + q -> y = (float)qI[2] / 16384.0f; + q -> z = (float)qI[3] / 16384.0f; + return 0; + } + return status; // int16 return value, indicates error if this line is reached +} +// uint8_t MPU6050::dmpGet6AxisQuaternion(long *data, const uint8_t* packet); +// uint8_t MPU6050::dmpGetRelativeQuaternion(long *data, const uint8_t* packet); +uint8_t MPU6050::dmpGetGyro(int32_t *data, const uint8_t* packet) { + // TODO: accommodate different arrangements of sent data (ONLY default supported now) + if (packet == 0) packet = dmpPacketBuffer; + data[0] = ((packet[16] << 24) + (packet[17] << 16) + (packet[18] << 8) + packet[19]); + data[1] = ((packet[20] << 24) + (packet[21] << 16) + (packet[22] << 8) + packet[23]); + data[2] = ((packet[24] << 24) + (packet[25] << 16) + (packet[26] << 8) + packet[27]); + return 0; +} +uint8_t MPU6050::dmpGetGyro(int16_t *data, const uint8_t* packet) { + // TODO: accommodate different arrangements of sent data (ONLY default supported now) + if (packet == 0) packet = dmpPacketBuffer; + data[0] = (packet[16] << 8) + packet[17]; + data[1] = (packet[20] << 8) + packet[21]; + data[2] = (packet[24] << 8) + packet[25]; + return 0; +} +// uint8_t MPU6050::dmpSetLinearAccelFilterCoefficient(float coef); +// uint8_t MPU6050::dmpGetLinearAccel(long *data, const uint8_t* packet); +uint8_t MPU6050::dmpGetLinearAccel(VectorInt16 *v, VectorInt16 *vRaw, VectorFloat *gravity) { + // get rid of the gravity component (+1g = +8192 in standard DMP FIFO packet, sensitivity is 2g) + v -> x = vRaw -> x - gravity -> x*8192; + v -> y = vRaw -> y - gravity -> y*8192; + v -> z = vRaw -> z - gravity -> z*8192; + return 0; +} +// uint8_t MPU6050::dmpGetLinearAccelInWorld(long *data, const uint8_t* packet); +uint8_t MPU6050::dmpGetLinearAccelInWorld(VectorInt16 *v, VectorInt16 *vReal, Quaternion *q) { + // rotate measured 3D acceleration vector into original state + // frame of reference based on orientation quaternion + memcpy(v, vReal, sizeof(VectorInt16)); + v -> rotate(q); + return 0; +} +// uint8_t MPU6050::dmpGetGyroAndAccelSensor(long *data, const uint8_t* packet); +// uint8_t MPU6050::dmpGetGyroSensor(long *data, const uint8_t* packet); +// uint8_t MPU6050::dmpGetControlData(long *data, const uint8_t* packet); +// uint8_t MPU6050::dmpGetTemperature(long *data, const uint8_t* packet); +// uint8_t MPU6050::dmpGetGravity(long *data, const uint8_t* packet); +uint8_t MPU6050::dmpGetGravity(VectorFloat *v, Quaternion *q) { + v -> x = 2 * (q -> x*q -> z - q -> w*q -> y); + v -> y = 2 * (q -> w*q -> x + q -> y*q -> z); + v -> z = q -> w*q -> w - q -> x*q -> x - q -> y*q -> y + q -> z*q -> z; + return 0; +} +// uint8_t MPU6050::dmpGetUnquantizedAccel(long *data, const uint8_t* packet); +// uint8_t MPU6050::dmpGetQuantizedAccel(long *data, const uint8_t* packet); +// uint8_t MPU6050::dmpGetExternalSensorData(long *data, int size, const uint8_t* packet); +// uint8_t MPU6050::dmpGetEIS(long *data, const uint8_t* packet); + +uint8_t MPU6050::dmpGetEuler(float *data, Quaternion *q) { + data[0] = atan2(2*q -> x*q -> y - 2*q -> w*q -> z, 2*q -> w*q -> w + 2*q -> x*q -> x - 1); // psi + data[1] = -asin(2*q -> x*q -> z + 2*q -> w*q -> y); // theta + data[2] = atan2(2*q -> y*q -> z - 2*q -> w*q -> x, 2*q -> w*q -> w + 2*q -> z*q -> z - 1); // phi + return 0; +} + +uint8_t MPU6050::dmpGetYawPitchRoll(float *data, Quaternion *q, VectorFloat *gravity) { + // yaw: (about Z axis) + data[0] = atan2(2*q -> x*q -> y - 2*q -> w*q -> z, 2*q -> w*q -> w + 2*q -> x*q -> x - 1); + // pitch: (nose up/down, about Y axis) + data[1] = atan(gravity -> x / sqrt(gravity -> y*gravity -> y + gravity -> z*gravity -> z)); + // roll: (tilt left/right, about X axis) + data[2] = atan(gravity -> y / sqrt(gravity -> x*gravity -> x + gravity -> z*gravity -> z)); + return 0; +} + +// uint8_t MPU6050::dmpGetAccelFloat(float *data, const uint8_t* packet); +// uint8_t MPU6050::dmpGetQuaternionFloat(float *data, const uint8_t* packet); + +uint8_t MPU6050::dmpProcessFIFOPacket(const unsigned char *dmpData) { + /*for (uint8_t k = 0; k < dmpPacketSize; k++) { + if (dmpData[k] < 0x10) Serial.print("0"); + Serial.print(dmpData[k], HEX); + Serial.print(" "); + } + Serial.print("\n");*/ + //Serial.println((uint16_t)dmpPacketBuffer); + return 0; +} +uint8_t MPU6050::dmpReadAndProcessFIFOPacket(uint8_t numPackets, uint8_t *processed) { + uint8_t status; + uint8_t buf[dmpPacketSize]; + for (uint8_t i = 0; i < numPackets; i++) { + // read packet from FIFO + getFIFOBytes(buf, dmpPacketSize); + + // process packet + if ((status = dmpProcessFIFOPacket(buf)) > 0) return status; + + // increment external process count variable, if supplied + if (processed != 0) *processed++; + } + return 0; +} + +// uint8_t MPU6050::dmpSetFIFOProcessedCallback(void (*func) (void)); + +// uint8_t MPU6050::dmpInitFIFOParam(); +// uint8_t MPU6050::dmpCloseFIFO(); +// uint8_t MPU6050::dmpSetGyroDataSource(uint_fast8_t source); +// uint8_t MPU6050::dmpDecodeQuantizedAccel(); +// uint32_t MPU6050::dmpGetGyroSumOfSquare(); +// uint32_t MPU6050::dmpGetAccelSumOfSquare(); +// void MPU6050::dmpOverrideQuaternion(long *q); +uint16_t MPU6050::dmpGetFIFOPacketSize() { + return dmpPacketSize; +} + +#endif /* _MPU6050_6AXIS_MOTIONAPPS20_H_ */