Diff: KL46z_single_tap_2017.cpp

Revision:

12:10e6d0d12833

Child:

13:49f888ad923f

diff -r c842619c49a1 -r 10e6d0d12833 KL46z_single_tap_2017.cpp
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/KL46z_single_tap_2017.cpp	Thu Mar 09 02:37:39 2017 +0000
@@ -0,0 +1,154 @@
+#include "mbed.h"
+#include "MMA8451Q8g.h"
+#include "SLCD.h"
+
+#define BLINKTIME   1.5
+#define RELAYON     0
+#define RELAYOFF    1
+#define LEDDELAY    0.4
+#define WAITDELAY   0.7
+#define LCDLEN      10
+
+#define REG_WHO_AM_I      0x0D
+#define XYZ_DATA_CFG      0x0E
+
+#define REG_OUT_X_MSB     0x01
+#define REG_OUT_Y_MSB     0x03
+#define REG_OUT_Z_MSB     0x05
+#define REG_PULSE_CFG     0x21
+#define REG_PULSE_SRC     0x22
+#define REG_PULSE_THSZ    0x25
+#define REH_PULSE_TMLT    0x26
+#define REG_CTRL_4        0x2D
+#define REG_CTRL_5        0x2E
+
+#define MAX_2G            0x00
+#define MAX_4G            0x01
+#define MAX_8G            0x02
+/**************************************
+You need to fill nn the missing numbers below for this to work
+0x00 is just a place holder 
+*************************************/
+#define LATCH_DATA        0x00  // for use in REG_PULSE_CFG
+#define AXIS_DATA         0x00
+#define SET_INTERRUPT     0x00     //using interrupt INT1 PTC5
+#define SET_INT_LINE      0x00
+
+#define SET_THZ           0x00      //  See Table 49 in data sheet
+
+#define SET_TMLT          0x00      // See Table 51 in data sheet
+/*********************************************************/
+
+//#define PRINTDBUG
+// Accelerometer I2C pins
+#if   defined (TARGET_KL25Z) || defined (TARGET_KL46Z)
+  PinName const SDA = PTE25;
+  PinName const SCL = PTE24;
+#elif defined (TARGET_KL05Z)
+  PinName const SDA = PTB4;
+  PinName const SCL = PTB3;
+#else
+  #error TARGET NOT DEFINED
+#endif
+
+#define MMA8451_I2C_ADDRESS (0x1d<<1)
+ 
+Ticker ledBlink; // timinginterrupt for RED led
+InterruptIn MMA8451QInt1(PTC5);  //push botton with internal pullup
+//InterruptIn MMA8451QInt1(PTD1);
+DigitalOut myled(LED_RED); // red led
+DigitalOut relay(LED_GREEN); // green led
+
+ MMA8451Q acc(SDA, SCL, MMA8451_I2C_ADDRESS);
+ 
+float delay = WAITDELAY;
+int relayState = RELAYOFF;
+int outState = false;
+SLCD slcd; //define LCD display
+char LCDMessages[2][LCDLEN] = {"TRUE", "FALS"};
+
+
+void LCDMess(char *lMess, float dWait){
+        slcd.Home();
+        slcd.clear();
+        slcd.printf(lMess);
+        wait(dWait);
+} 
+void LCDMessNoDwell(char *lMess){
+        slcd.Home();
+        slcd.clear();
+        slcd.printf(lMess);
+} 
+
+// Interrupt routines
+void LEDBlinker(){  // RED LED interrupt
+    outState = !outState; 
+    myled.write(outState);
+}
+
+void GreenLEDBlinker(){  // Green LED interrupt
+    //uint8_t i_regData; 
+    relayState = !relayState; 
+    relay.write(relayState);
+    //acc.readRegs(REG_PULSE_SRC, &i_regData, 1); // Clear the tap event
+}        
+
+// end interrupt routines
+
+int main()
+{
+    uint8_t regData; 
+    
+
+    char lcdData[LCDLEN];
+    
+    myled.write(outState);
+    relay.write(relayState);
+    
+// set up interrrupts to be used later for taps
+    MMA8451QInt1.rise(&GreenLEDBlinker);
+    MMA8451QInt1.mode(PullNone); 
+   
+// set up interrrupts to be used later for taps
+    ledBlink.attach(&LEDBlinker, LEDDELAY);
+  
+// Read Pulse Source Data and check to see if things have been set
+    acc.readRegs(REG_PULSE_CFG, &regData, 1);  // check it
+    sprintf (lcdData,"%x",regData);
+    LCDMess(lcdData,BLINKTIME); 
+    
+// *********** Initialize for tap tecognition ***********      
+    regData = LATCH_DATA | AXIS_DATA;
+    acc.setRegisterInStandby(REG_PULSE_CFG, regData); // write the data
+    acc.readRegs(REG_PULSE_CFG, &regData, 1);  // check it
+    sprintf (lcdData,"%x",regData);
+    LCDMess(lcdData,BLINKTIME);     
+    
+// Check to see if accerlometer is alive and well
+    acc.setGLimit(MAX_4G); // For now set to 2g
+    acc.readRegs(XYZ_DATA_CFG, &regData, 1);
+    sprintf (lcdData,"%x",regData); // Note displaying in hexidecimal
+    LCDMess(lcdData,BLINKTIME);
+    
+// Setup single-tap pulse prarameters.
+   acc.setRegisterInStandby(REG_PULSE_THSZ, SET_THZ); // write the data
+   acc.setRegisterInStandby(REH_PULSE_TMLT, SET_TMLT); // write the data 
+      
+// Set up (pulse) interrupt to INT1 pin
+    acc.setRegisterInStandby(REG_CTRL_4, SET_INTERRUPT); // write the data
+    acc.setRegisterInStandby(REG_CTRL_5, SET_INT_LINE); // write the data
+// End or seetup    
+
+    acc.readRegs(REG_WHO_AM_I, &regData, 1);
+    sprintf (lcdData,"%x",regData);
+    LCDMess(lcdData,BLINKTIME); 
+  
+    
+    while (true) { 
+        acc.readRegs(REG_PULSE_SRC, &regData, 1);
+        sprintf (lcdData,"%x",regData);
+        LCDMess(lcdData,BLINKTIME);           
+        LCDMessNoDwell(LCDMessages[relayState]);  
+        wait(delay);
+    }
+}
\ No newline at end of file