USBMSD class: generic class in order to use all kinds of blocks storage chip. More...

#include <USBMSD.h>

Public Member Functions
	USBMSD (BlockDevice *bd, bool connect_blocking=true, uint16_t vendor_id=0x0703, uint16_t product_id=0x0104, uint16_t product_release=0x0001)
	Constructor.
	USBMSD (USBPhy phy, BlockDevice bd, uint16_t vendor_id, uint16_t product_id, uint16_t product_release)
	Fully featured constructor.
virtual	~USBMSD ()
	Destroy this object.
bool	connect ()
	Connect the USB MSD device.
void	disconnect ()
	Disconnect the USB MSD device.
void	process ()
	Perform USB processing.
void	attach (mbed::Callback< void()> cb)
	Called when USBMSD needs to perform processing.
bool	media_removed ()
	Check if MSD device was removed/unmounted on the host side.
void	init ()
	Initialize this instance.
void	deinit ()
	Power down this instance.
bool	configured ()
	Check if the device is configured.
void	sof_enable ()
	Enable the start of frame interrupt.
void	sof_disable ()
	Disable the start of frame interrupt.
bool	endpoint_add (usb_ep_t endpoint, uint32_t max_packet, usb_ep_type_t type, mbed::Callback< void()> callback=NULL)
	Add an endpoint.
template<typename T >
bool	endpoint_add (usb_ep_t endpoint, uint32_t max_packet, usb_ep_type_t type, void(T::*callback)())
	Add an endpoint.
void	endpoint_remove (usb_ep_t endpoint)
	Remove an endpoint.
void	endpoint_remove_all ()
	Remove all non-zero endpoints.
void	endpoint_stall (usb_ep_t endpoint)
	Stall an endpoint.
void	endpoint_unstall (usb_ep_t endpoint)
	Un-stall an endpoint.
uint32_t	endpoint_max_packet_size (usb_ep_t endpoint)
	Get the current maximum size for this endpoint.
void	endpoint_abort (usb_ep_t endpoint)
	Abort the current transfer on this endpoint.
bool	read_start (usb_ep_t endpoint, uint8_t *buffer, uint32_t size)
	start a read on the given endpoint
uint32_t	read_finish (usb_ep_t endpoint)
	Get the status of a read.
bool	write_start (usb_ep_t endpoint, uint8_t *buffer, uint32_t size)
	Write a data to the given endpoint.
uint32_t	write_finish (usb_ep_t endpoint)
	Get the status of a write.
Protected Member Functions
virtual void	callback_power (bool powered)
	Called by USBDevice layer on power state change.
virtual void	callback_sof (int frame_number)
	Called by USBDevice layer on each new USB frame.
virtual void	callback_reset ()
	Called by USBDevice layer on bus reset.
void	complete_request (RequestResult result, uint8_t *data=NULL, uint32_t size=0)
	Called to complete the setup stage of a callback request.
void	complete_request_xfer_done (bool success)
	Called to complete the data stage of a callback request.
void	complete_set_configuration (bool success)
	Called to complete a set configuration command.
void	complete_set_interface (bool success)
	Called to complete a set interface command.
uint8_t *	find_descriptor (uint8_t descriptor_type, uint8_t index=0)
	Find a descriptor type inside the configuration descriptor.
const usb_ep_table_t *	endpoint_table ()
	Get the endpoint table of this device.
virtual void	start_process ()
	Callback called to indicate the USB processing needs to be done.
virtual void	lock ()
	Acquire exclusive access to this instance USBDevice.
virtual void	unlock ()
	Release exclusive access to this instance USBDevice.
virtual void	assert_locked ()
	Assert that the current thread of execution holds the lock.

Detailed Description

USBMSD class: generic class in order to use all kinds of blocks storage chip.

Introduction

USBMSD implements the MSD protocol. It permits to access a block device (flash, SD Card,...) from a computer over USB.

 #include "mbed.h"
 #include "SDBlockDevice.h"
 #include "USBMSD.h"

 SDBlockDevice sd(PTE3, PTE1, PTE2, PTE4);
 USBMSD usb(&sd);

 int main() {

     while(true) {
         usb.process();
     }

     return 0;
 }

Definition at line 64 of file USBMSD.h.

Constructor & Destructor Documentation

USBMSD	(	BlockDevice *	bd,
		bool	connect_blocking = `true`,
		uint16_t	vendor_id = `0x0703`,
		uint16_t	product_id = `0x0104`,
		uint16_t	product_release = `0x0001`
	)

Constructor.

This creates a new USBMSD object with the given block device. Connect must be called for the block device to connect.

Parameters:

bd	BlockDevice to mount as a USB drive
connect_blocking	true to perform a blocking connect, false to start in a disconnected state
vendor_id	Your vendor_id
product_id	Your product_id
product_release	Your preoduct_release

Definition at line 67 of file USBMSD.cpp.

USBMSD	(	USBPhy *	phy,
		BlockDevice *	bd,
		uint16_t	vendor_id,
		uint16_t	product_id,
		uint16_t	product_release
	)

Fully featured constructor.

Construct this object with the supplied USBPhy and parameters. The user this object is responsible for calling connect() or init().

Note:: Derived classes must use this constructor and call init() or connect() themselves. Derived classes should also call deinit() in their destructor. This ensures that no interrupts can occur when the object is partially constructed or destroyed.

Parameters:

phy	USB phy to use
bd	BlockDevice to mount as a USB drive
vendor_id	Your vendor_id
product_id	Your product_id
product_release	Your preoduct_release

Definition at line 80 of file USBMSD.cpp.

~USBMSD ( ) [virtual]

Destroy this object.

Any classes which inherit from this class must call disconnect before this destructor runs.

Definition at line 112 of file USBMSD.cpp.

Member Function Documentation

void assert_locked ( ) [protected, virtual, inherited]

Assert that the current thread of execution holds the lock.

Definition at line 1737 of file USBDevice.cpp.

void attach ( mbed::Callback< void()> cb )

Called when USBMSD needs to perform processing.

Parameters:

cb	Callback called when USBMSD needs process() to be called

Definition at line 210 of file USBMSD.cpp.

virtual void callback_power ( bool powered ) [protected, virtual, inherited]

Called by USBDevice layer on power state change.

Parameters:

powered true if device is powered, false otherwise

Warning: Called in ISR context

Definition at line 342 of file USBDevice.h.

virtual void callback_reset ( ) [protected, virtual, inherited]

Called by USBDevice layer on bus reset.

complete_reset must be called after the device is fully reset.

Warning: Called in ISR context

Definition at line 370 of file USBDevice.h.

virtual void callback_sof ( int frame_number ) [protected, virtual, inherited]

Called by USBDevice layer on each new USB frame.

Callbacks are enabled and disabled by calling sof_enable and sof_disable.

Parameters:

frame_number The current frame number

Warning: Called in ISR context

Definition at line 357 of file USBDevice.h.

void complete_request	(	RequestResult	result,
		uint8_t *	data = `NULL`,
		uint32_t	size = `0`
	)		`[protected, inherited]`

Called to complete the setup stage of a callback request.

Possible options that can be passed as a result are:

Receive - Start the data OUT phase of this control transfer
Send - Start the data IN phase of this control transfer
Success - Operation was a success so start the status phase
Failure - Operation failed or is unsupported so send a stall
PassThrough - Pass on the request for standard processing

Parameters:

result	The result of the setup phase.
data	Buffer to send or receive if the result is Send or Receive
size	Size to transfer if the result is Send or Receive

Definition at line 694 of file USBDevice.cpp.

void complete_request_xfer_done ( bool success ) [protected, inherited]

Called to complete the data stage of a callback request.

Parameters:

success true if the operation was successful, false otherwise

Definition at line 313 of file USBDevice.cpp.

void complete_set_configuration ( bool success ) [protected, inherited]

Called to complete a set configuration command.

Parameters:

success true if the configuration was set, false otherwise

Definition at line 386 of file USBDevice.cpp.

void complete_set_interface ( bool success ) [protected, inherited]

Called to complete a set interface command.

Parameters:

success true if the interface was set, false otherwise

Definition at line 466 of file USBDevice.cpp.

bool configured ( ) [inherited]

Check if the device is configured.

Returns:: true if configured, false otherwise

Definition at line 1043 of file USBDevice.cpp.

bool connect ( )

Connect the USB MSD device.

Returns:: true if successful

Reimplemented from USBDevice.

Definition at line 119 of file USBMSD.cpp.

void deinit ( ) [inherited]

Power down this instance.

Disable interrupts and stop sending events. This method can be used for temporary power-saving; This call can allow USB to be temporarily disabled to permit power saving. However, it is up to the user to make sure all the transfers have concluded (for example when USB power is lost). USBDevice::connect can be used to resume USB operation.

Definition at line 1030 of file USBDevice.cpp.

void disconnect ( void )

Disconnect the USB MSD device.

Reimplemented from USBDevice.

Definition at line 172 of file USBMSD.cpp.

void endpoint_abort ( usb_ep_t endpoint ) [inherited]

Abort the current transfer on this endpoint.

Parameters:

endpoint endpoint with transfer to abort

Note:: This endpoint must already have been setup with endpoint_add

Definition at line 1396 of file USBDevice.cpp.

bool endpoint_add	(	usb_ep_t	endpoint,
		uint32_t	max_packet,
		usb_ep_type_t	type,
		mbed::Callback< void()>	callback = `NULL`
	)		`[inherited]`

Add an endpoint.

Parameters:

endpoint	Endpoint to enable
max_packet	Maximum size of a packet which can be sent or received on this endpoint
type	Endpoint type - USB_EP_TYPE_BULK, USB_EP_TYPE_INT or USB_EP_TYPE_ISO
callback	Method pointer to be called when a packet is transferred

Returns:: true if successful, false otherwise

Definition at line 1109 of file USBDevice.cpp.

bool endpoint_add	(	usb_ep_t	endpoint,
		uint32_t	max_packet,
		usb_ep_type_t	type,
		void(T::*)()	callback
	)		`[inherited]`

Add an endpoint.

Parameters:

endpoint	Endpoint to enable
max_packet	Maximum size of a packet which can be sent or received on this endpoint
type	Endpoint type - USB_EP_TYPE_BULK, USB_EP_TYPE_INT or USB_EP_TYPE_ISO
callback	Method pointer to be called when a packet is transferred

Returns:: true if successful, false otherwise

Definition at line 162 of file USBDevice.h.

uint32_t endpoint_max_packet_size ( usb_ep_t endpoint ) [inherited]

Get the current maximum size for this endpoint.

Return the currently configured maximum packet size, wMaxPacketSize, for this endpoint.

Note:: This endpoint must already have been setup with endpoint_add

Definition at line 1380 of file USBDevice.cpp.

void endpoint_remove ( usb_ep_t endpoint ) [inherited]

Remove an endpoint.

Parameters:

endpoint Endpoint to disable

Note:: This endpoint must already have been setup with endpoint_add

Definition at line 1149 of file USBDevice.cpp.

void endpoint_remove_all ( ) [inherited]

Remove all non-zero endpoints.

Definition at line 1190 of file USBDevice.cpp.

void endpoint_stall ( usb_ep_t endpoint ) [inherited]

Stall an endpoint.

If there is an ongoing transfer on this endpoint then it will be aborted.

Parameters:

endpoint Endpoint to stall

Note:: You cannot stall endpoint 0 with this function; This endpoint must already have been setup with endpoint_add

Definition at line 1204 of file USBDevice.cpp.

const usb_ep_table_t * endpoint_table ( ) [protected, inherited]

Get the endpoint table of this device.

Returns:: Endpoint table of the USBPhy attached to this USBDevice

Definition at line 1321 of file USBDevice.cpp.

void endpoint_unstall ( usb_ep_t endpoint ) [inherited]

Un-stall an endpoint.

Un-stalling an endpoint resets data toggle back to DATA0. Additionally, if there is an ongoing transfer on this endpoint it will be aborted.

Parameters:

endpoint Endpoint to un-stall

Note:: This endpoint must already have been setup with endpoint_add

Definition at line 1241 of file USBDevice.cpp.

uint8_t * find_descriptor	(	uint8_t	descriptor_type,
		uint8_t	index = `0`
	)		`[protected, inherited]`

Find a descriptor type inside the configuration descriptor.

Parameters:

descriptor_type	Type of descriptor to find
index	Configuration descriptor index ( 0 if only one configuration present )

Returns:: A descriptor of the given type or NULL if none were found

Definition at line 1278 of file USBDevice.cpp.

void init ( ) [inherited]

Initialize this instance.

This function must be called before calling any other functions of this class, unless specifically

Definition at line 1017 of file USBDevice.cpp.

void lock ( void ) [protected, virtual, inherited]

Acquire exclusive access to this instance USBDevice.

Definition at line 1714 of file USBDevice.cpp.

bool media_removed ( )

Check if MSD device was removed/unmounted on the host side.

Returns:: true if device was removed/unmounted on the host side

Definition at line 219 of file USBMSD.cpp.

void process ( )

Perform USB processing.

Definition at line 205 of file USBMSD.cpp.

uint32_t read_finish ( usb_ep_t endpoint ) [inherited]

Get the status of a read.

Parameters:

endpoint endpoint to get the status of

Returns:: number of bytes read by this endpoint

Definition at line 1489 of file USBDevice.cpp.

bool read_start	(	usb_ep_t	endpoint,
		uint8_t *	buffer,
		uint32_t	size
	)		`[inherited]`

start a read on the given endpoint

Start a read on the given endpoint. The data buffer must remain unchanged until the transfer either completes or is aborted.

Parameters:

endpoint	endpoint to read data from
buffer	buffer to fill with read data
size	The size of data to read. This must be greater than or equal to the max packet size for this endpoint

Returns:: true if the read was completed, otherwise false

Note:: This endpoint must already have been setup with endpoint_add

Definition at line 1431 of file USBDevice.cpp.

void sof_disable ( ) [inherited]

Disable the start of frame interrupt.

Stop calling USBDevice::callback_sof.

Definition at line 1100 of file USBDevice.cpp.

void sof_enable ( ) [inherited]

Enable the start of frame interrupt.

Call USBDevice::callback_sof on every frame.

Definition at line 1091 of file USBDevice.cpp.

void start_process ( ) [protected, virtual, inherited]

Callback called to indicate the USB processing needs to be done.

Implements USBPhyEvents.

Definition at line 1705 of file USBDevice.cpp.

void unlock ( void ) [protected, virtual, inherited]

Release exclusive access to this instance USBDevice.

Definition at line 1721 of file USBDevice.cpp.

uint32_t write_finish ( usb_ep_t endpoint ) [inherited]

Get the status of a write.

Parameters:

endpoint endpoint to get the status of

Returns:: number of bytes sent by this endpoint

Definition at line 1583 of file USBDevice.cpp.

bool write_start	(	usb_ep_t	endpoint,
		uint8_t *	buffer,
		uint32_t	size
	)		`[inherited]`

Write a data to the given endpoint.

Write data to an endpoint. The data sent must remain unchanged until the transfer either completes or is aborted.

Parameters:

endpoint	endpoint to write data to
buffer	data to write
size	the size of data to send. This must be less than or equal to the max packet size of this endpoint

Note:: This endpoint must already have been setup with endpoint_add

Definition at line 1522 of file USBDevice.cpp.

Type:	Library
Created:	17 Dec 2019
Imports:	79
Forks:	0
Commits:	2
Dependents:	2
Dependencies:	0
Followers:	1

Important changes to repositories hosted on mbed.com

USBMSD Class Reference
[USBMSD class]

Public Member Functions

Protected Member Functions

Detailed Description

Constructor & Destructor Documentation

Member Function Documentation

Repository toolbox

Repository details

Important Information for this Arm website

Important changes to repositories hosted on mbed.com

USBMSD Class Reference [USBMSD class]

Public Member Functions

Protected Member Functions

Detailed Description

Constructor & Destructor Documentation

Member Function Documentation

Repository toolbox

Repository details

Important Information for this Arm website

Access Warning

USBMSD Class Reference
[USBMSD class]