TLSSocket is a wrapper around TCPSocket for interacting with TLS servers. More...

#include <TLSSocket.h>

Inherits TCPSocket, and TLSSocketWrapper.

Public Types
enum	control_transport { TRANSPORT_KEEP, TRANSPORT_CONNECT_AND_CLOSE, TRANSPORT_CONNECT, TRANSPORT_CLOSE }
	Transport modes. More...
Public Member Functions
	TLSSocket ()
	Create an uninitialized socket.
virtual	~TLSSocket ()
	Destroy the TLSSocket and closes the transport.
virtual nsapi_error_t	open (NetworkStack *stack)
	Opens a socket.
	MBED_DEPRECATED_SINCE ("mbed-os-5.15","String-based APIs are deprecated") nsapi_error_t connect(const char *host
	Connects TCP socket to a remote host.
nsapi_error_t	set_hostname (const char *hostname)
	Set hostname.
virtual nsapi_error_t	set_root_ca_cert (const void *root_ca, size_t len)
	Sets the certification of Root CA.
virtual nsapi_error_t	set_root_ca_cert (const char *root_ca_pem)
	Sets the certification of Root CA.
virtual nsapi_error_t	set_client_cert_key (const void client_cert, size_t client_cert_len, const void client_private_key_pem, size_t client_private_key_len)
	Sets client certificate, and client private key.
virtual nsapi_error_t	set_client_cert_key (const char client_cert_pem, const char client_private_key_pem)
	Sets client certificate, and client private key.
virtual nsapi_error_t	connect (const SocketAddress &address)
	Connects TCP socket to a remote host.
template<typename S >
	MBED_DEPRECATED_SINCE ("mbed-os-5.11","The TCPSocket(S stack) constructor is deprecated.""It discards the open() call return value.""Use another constructor and call open() explicitly, instead.") TCPSocket(S stack)
	Create a socket on a network interface.
template<typename T , typename M >
MBED_DEPRECATED_SINCE("mbed-os-5.4","The behavior of Socket::attach differs from other attach functions in ""Mbed OS and has been known to cause confusion. Replaced by Socket::sigio.") void attach(mbed	MBED_DEPRECATED_SINCE ("mbed-os-5.1","The attach function does not support cv-qualifiers. Replaced by ""attach(callback(obj, method)).") void attach(T *obj
	Register a callback on state change of the socket.
virtual int	join_multicast_group (const SocketAddress &address)
	Override multicast functions to return error for TCP.
virtual nsapi_size_or_error_t	send (const void *data, nsapi_size_t size)
	Send data over a TCP socket.
virtual nsapi_size_or_error_t	recv (void *data, nsapi_size_t size)
	Receive data over a TCP socket.
virtual nsapi_size_or_error_t	sendto (const SocketAddress &address, const void *data, nsapi_size_t size)
	Send data on a socket.
virtual nsapi_size_or_error_t	recvfrom (SocketAddress address, void data, nsapi_size_t size)
	Receive a data from a socket.
virtual TCPSocket *	accept (nsapi_error_t *error=NULL)
	Accepts a connection on a socket.
virtual nsapi_error_t	listen (int backlog=1)
	Listen for incoming connections.
virtual nsapi_error_t	close ()
	Close any open connection, and deallocate any memory associated with the socket.
int	leave_multicast_group (const SocketAddress &address)
	Leave an IP multicast group.
nsapi_error_t	bind (uint16_t port)
	Bind the socket to a port on which to receive data.
virtual nsapi_error_t	bind (const SocketAddress &address)
virtual void	set_blocking (bool blocking)
virtual void	set_timeout (int timeout)
virtual nsapi_error_t	setsockopt (int level, int optname, const void *optval, unsigned optlen)
virtual nsapi_error_t	getsockopt (int level, int optname, void optval, unsigned optlen)
virtual void	sigio (mbed::Callback< void()> func)
virtual nsapi_error_t	getpeername (SocketAddress *address)
virtual nsapi_error_t	send (const void *data, nsapi_size_t size)
	Send data over a TLS socket.
virtual nsapi_size_or_error_t	recv (void *data, nsapi_size_t size)
	Receive data over a TLS socket.
virtual nsapi_error_t	close ()
	Closes the socket.
virtual nsapi_size_or_error_t	sendto (const SocketAddress &address, const void *data, nsapi_size_t size)
	Send a message on a socket.
virtual nsapi_size_or_error_t	recvfrom (SocketAddress address, void data, nsapi_size_t size)
	Receive a data from a socket.
virtual nsapi_error_t	bind (const SocketAddress &address)
	Bind a specific address to a socket.
virtual void	set_blocking (bool blocking)
	Set blocking or non-blocking mode of the socket.
virtual void	set_timeout (int timeout)
	Set timeout on blocking socket operations.
virtual void	sigio (mbed::Callback< void()> func)
	Register a callback on state change of the socket.
virtual nsapi_error_t	setsockopt (int level, int optname, const void *optval, unsigned optlen)
	Set socket options.
virtual nsapi_error_t	getsockopt (int level, int optname, void optval, unsigned optlen)
	Get socket options.
virtual Socket *	accept (nsapi_error_t *error=NULL)
	Accepts a connection on a socket.
virtual nsapi_error_t	listen (int backlog=1)
	Listen for incoming connections.
virtual nsapi_error_t	getpeername (SocketAddress *address)
	Get the remote-end peer associated with this socket.
mbedtls_x509_crt *	get_own_cert ()
	Get own certificate directly from Mbed TLS.
int	set_own_cert (mbedtls_x509_crt *crt)
	Set own certificate directly to Mbed TLS.
mbedtls_x509_crt *	get_ca_chain ()
	Get CA chain structure.
void	set_ca_chain (mbedtls_x509_crt *crt)
	Set CA chain directly to Mbed TLS.
mbedtls_ssl_config *	get_ssl_config ()
	Get internal Mbed TLS configuration structure.
void	set_ssl_config (mbedtls_ssl_config *conf)
	Override Mbed TLS configuration.
mbedtls_ssl_context *	get_ssl_context ()
	Get internal Mbed TLS context structure.
Protected Member Functions
nsapi_error_t	start_handshake (bool first_call)
	Initiates TLS Handshake.
Friends
class	TCPServer
class	DTLSSocket

Detailed Description

TLSSocket is a wrapper around TCPSocket for interacting with TLS servers.

TLSSocket uses the TLSSocketWrapper with internal TCP socket. This is a helper for creating commonly used TLS connections over TCP.

Definition at line 47 of file TLSSocket.h.

Member Enumeration Documentation

enum control_transport [inherited]

Transport modes.

Enumerator:

TRANSPORT_KEEP	Doesn't call connect() or close() on transport socket.
TRANSPORT_CONNECT_AND_CLOSE	Does call connect() and close() on transport socket.
TRANSPORT_CONNECT	Does call only connect() on transport socket.
TRANSPORT_CLOSE	Does call close() on transport socket.

Definition at line 47 of file TLSSocketWrapper.h.

Constructor & Destructor Documentation

TLSSocket ( )

Create an uninitialized socket.

Must call open to initialize the socket on a network stack.

Definition at line 53 of file TLSSocket.h.

~TLSSocket ( ) [virtual]

Destroy the TLSSocket and closes the transport.

Definition at line 43 of file TLSSocket.cpp.

Member Function Documentation

TCPSocket * accept ( nsapi_error_t * error = NULL ) [virtual, inherited]

Accepts a connection on a socket.

The server socket must be bound and set to listen for connections. On a new connection, returns connected network socket which user is expected to call close() and that deallocates the resources. Referencing a returned pointer after a close() call is not allowed and leads to undefined behavior.

By default, accept blocks until incoming connection occurs. If socket is set to non-blocking or times out, error is set to NSAPI_ERROR_WOULD_BLOCK.

Parameters:

error pointer to storage of the error value or NULL: NSAPI_ERROR_OK on success NSAPI_ERROR_WOULD_BLOCK if socket is set to non-blocking and would block NSAPI_ERROR_NO_SOCKET if the socket was not open

Returns:: pointer to a socket

Implements Socket.

Definition at line 275 of file TCPSocket.cpp.

Socket * accept ( nsapi_error_t * error = NULL ) [virtual, inherited]

Accepts a connection on a socket.

The server socket must be bound and set to listen for connections. On a new connection, returns connected network socket to call close() that deallocates the resources. Referencing a returned pointer after a close() call is not allowed and leads to undefined behavior.

By default, accept blocks until incoming connection occurs. If socket is set to non-blocking or times out, error is set to NSAPI_ERROR_WOULD_BLOCK.

Parameters:

error Pointer to storage of the error value or NULL.

Returns:: Pointer to a socket.

Implements Socket.

Definition at line 683 of file TLSSocketWrapper.cpp.

nsapi_error_t bind ( const SocketAddress & address ) [virtual, inherited]

Bind a specific address to a socket.

Binding a socket specifies the address and port on which to receive data. If the IP address is zeroed, only the port is bound.

Parameters:

address Local address to bind.

Returns:: NSAPI_ERROR_OK on success, negative subclass-dependent error code on failure.

Implements Socket.

Definition at line 635 of file TLSSocketWrapper.cpp.

nsapi_error_t bind ( uint16_t port ) [inherited]

Bind the socket to a port on which to receive data.

Parameters:

port	Local port to bind.

Return values:

NSAPI_ERROR_OK	on success.
NSAPI_ERROR_NO_SOCKET	if socket is not open.
int	negative error codes for stack-related failures. See NetworkStack::socket_bind.

Definition at line 123 of file InternetSocket.cpp.

nsapi_error_t bind ( const SocketAddress & address ) [virtual, inherited]

Bind a specific address to a socket.

Binding a socket specifies the address and port on which to receive data. If the IP address is zeroed, only the port is bound.

Parameters:

address Local address to bind.

Returns:: NSAPI_ERROR_OK on success, negative subclass-dependent error code on failure.

Implements Socket.

Definition at line 137 of file InternetSocket.cpp.

nsapi_error_t close ( void ) [virtual, inherited]

Close any open connection, and deallocate any memory associated with the socket.

Called from destructor if socket is not closed.

Return values:

NSAPI_ERROR_OK	on success.
NSAPI_ERROR_NO_SOCKET	if socket is not open.
int	negative error codes for stack-related failures. See NetworkStack::socket_close.

Implements Socket.

Definition at line 64 of file InternetSocket.cpp.

nsapi_error_t close ( ) [virtual, inherited]

Closes the socket.

Closes any open connection and deallocates any memory associated with the socket. Called from destructor if socket is not closed.

Returns:: NSAPI_ERROR_OK on success. Negative subclass-dependent error code on failure.

Implements Socket.

Definition at line 589 of file TLSSocketWrapper.cpp.

nsapi_error_t connect ( const SocketAddress & address ) [virtual]

Connects TCP socket to a remote host.

Initiates a connection to a remote server specified by the indicated address.

Parameters:

address The SocketAddress of the remote host

Return values:

NSAPI_ERROR_OK	on success
NSAPI_ERROR_IN_PROGRESS	if the operation is ongoing
NSAPI_ERROR_NO_SOCKET	if the socket has not been allocated
NSAPI_ERROR_DNS_FAILURE	if the DNS address of host could not be resolved
NSAPI_ERROR_IS_CONNECTED	if the connection is already established
int	Other negative error codes for stack-related failures. See NetworkStack::socket_connect().

Reimplemented from TCPSocket.

Definition at line 103 of file TLSSocket.cpp.

mbedtls_x509_crt * get_ca_chain ( ) [inherited]

Get CA chain structure.

Returns:: Mbed TLS X509 certificate chain.

Definition at line 530 of file TLSSocketWrapper.cpp.

mbedtls_x509_crt * get_own_cert ( ) [inherited]

Get own certificate directly from Mbed TLS.

Returns:: Internal Mbed TLS X509 structure.

Definition at line 508 of file TLSSocketWrapper.cpp.

mbedtls_ssl_config * get_ssl_config ( ) [inherited]

Get internal Mbed TLS configuration structure.

Returns:: Mbed TLS SSL config.

Definition at line 549 of file TLSSocketWrapper.cpp.

mbedtls_ssl_context * get_ssl_context ( ) [inherited]

Get internal Mbed TLS context structure.

Returns:: SSL context.

Definition at line 584 of file TLSSocketWrapper.cpp.

nsapi_error_t getpeername ( SocketAddress * address ) [virtual, inherited]

Get the remote-end peer associated with this socket.

Copy the remote peer address to a SocketAddress structure pointed by address parameter. Socket must be connected to have a peer address associated.

Parameters:

address Pointer to SocketAddress structure.

Return values:

NSAPI_ERROR_OK	on success.
NSAPI_ERROR_NO_SOCKET	if socket is not connected.
NSAPI_ERROR_NO_CONNECTION	if the remote peer was not set.

Implements Socket.

Definition at line 710 of file TLSSocketWrapper.cpp.

nsapi_error_t getpeername ( SocketAddress * address ) [virtual, inherited]

Get the remote-end peer associated with this socket.

Copy the remote peer address to a SocketAddress structure pointed by address parameter. Socket must be connected to have a peer address associated.

Parameters:

address Pointer to SocketAddress structure.

Return values:

NSAPI_ERROR_OK	on success.
NSAPI_ERROR_NO_SOCKET	if socket is not connected.
NSAPI_ERROR_NO_CONNECTION	if the remote peer was not set.

Implements Socket.

Definition at line 225 of file InternetSocket.cpp.

nsapi_error_t getsockopt	(	int	level,
		int	optname,
		void *	optval,
		unsigned *	optlen
	)		`[virtual, inherited]`

Get socket options.

getsockopt() allows an application to retrieve stack-specific options from the underlying stack using stack-specific level and option names, or to request generic options using levels from nsapi_socket_level_t.

For unsupported options, NSAPI_ERROR_UNSUPPORTED is returned and the socket is unmodified.

Parameters:

level	Stack-specific protocol level or nsapi_socket_level_t.
optname	Level-specific option name.
optval	Destination for option value.
optlen	Length of the option value.

Return values:

NSAPI_ERROR_OK	on success.
NSAPI_ERROR_NO_SOCKET	if socket is not open.
int	Negative error code on failure, see NetworkStack::getsockopt.

Implements Socket.

Definition at line 675 of file TLSSocketWrapper.cpp.

nsapi_error_t getsockopt	(	int	level,
		int	optname,
		void *	optval,
		unsigned *	optlen
	)		`[virtual, inherited]`

Get socket options.

getsockopt() allows an application to retrieve stack-specific options from the underlying stack using stack-specific level and option names, or to request generic options using levels from nsapi_socket_level_t.

For unsupported options, NSAPI_ERROR_UNSUPPORTED is returned and the socket is unmodified.

Parameters:

level	Stack-specific protocol level or nsapi_socket_level_t.
optname	Level-specific option name.
optval	Destination for option value.
optlen	Length of the option value.

Return values:

NSAPI_ERROR_OK	on success.
NSAPI_ERROR_NO_SOCKET	if socket is not open.
int	Negative error code on failure, see NetworkStack::getsockopt.

Implements Socket.

Definition at line 189 of file InternetSocket.cpp.

virtual int join_multicast_group ( const SocketAddress & address ) [virtual, inherited]

Override multicast functions to return error for TCP.

Reimplemented from InternetSocket.

Definition at line 68 of file TCPSocket.h.

int leave_multicast_group ( const SocketAddress & address ) [inherited]

Leave an IP multicast group.

Parameters:

address Multicast group IP address.

Returns:: NSAPI_ERROR_OK on success, negative error code on failure (

See also:: InternetSocket::setsockopt).

Definition at line 117 of file InternetSocket.cpp.

nsapi_error_t listen ( int backlog = 1 ) [virtual, inherited]

Listen for incoming connections.

Marks the socket as a passive socket that can be used to accept incoming connections.

Parameters:

backlog Number of pending connections that can be queued simultaneously, defaults to 1

Return values:

NSAPI_ERROR_OK	on success
NSAPI_ERROR_NO_SOCKET	in case socket was not created correctly
int	Other negative error codes for stack-related failures. See NetworkStack::socket_listen.

Implements Socket.

Definition at line 257 of file TCPSocket.cpp.

nsapi_error_t listen ( int backlog = 1 ) [virtual, inherited]

Listen for incoming connections.

Marks the socket as a passive socket that can be used to accept incoming connections.

Parameters:

backlog Number of pending connections that can be queued simultaneously, defaults to 1.

Returns:: NSAPI_ERROR_OK on success, negative error code on failure.

Implements Socket.

Definition at line 691 of file TLSSocketWrapper.cpp.

MBED_DEPRECATED_SINCE	(	"mbed-os-5.15"	,
		"String-based APIs are deprecated"
	)		const

Connects TCP socket to a remote host.

Initiates a connection to a remote server specified by either a domain name or an IP address and port.

Note:: : In case connect() returns NSAPI_ERROR_AUTH_FAILURE, the socket must be freed either by calling close() or destroying it.

Parameters:

host	Hostname of the remote host.
port	Port of the remote host.

Returns:: NSAPI_ERROR_OK on success, negative error code on failure. See TLSSocketWrapper::connect.

Reimplemented from TCPSocket.

MBED_DEPRECATED_SINCE ("mbed-os-5.4", "The behavior of Socket::attach differs from other attach functions in " "Mbed OS and has been known to cause confusion. Replaced by Socket::sigio.") void attach(mbed MBED_DEPRECATED_SINCE	(	"mbed-os-5.1"	,
		"The attach function does not support cv-qualifiers. Replaced by ""attach(callback(obj, method))."
	)		`[inherited]`

Register a callback on state change of the socket.

See also:: Socket::sigio

Register a callback on state change of the socket.

See also:: Socket::sigio

MBED_DEPRECATED_SINCE	(	"mbed-os-5.11"	,
		"The TCPSocket(S *stack) constructor is deprecated.""It discards the open() call return value.""Use another constructor and call open()	explicitly,
		instead."
	)		`[inherited]`

Create a socket on a network interface.

Creates and opens a socket on the network stack of the given network interface.

Parameters:

stack Network stack as target for socket

Definition at line 50 of file TCPSocket.h.

virtual nsapi_error_t open ( NetworkStack * stack ) [virtual]

Opens a socket.

Creates a network socket on the network stack of the given network interface.

Note:: TLSSocket cannot be reopened after closing. It should be destructed to clear internal TLS memory structures.

Parameters:

stack Network stack as target for socket.

Returns:: NSAPI_ERROR_OK on success. See TCPSocket::open

Reimplemented from InternetSocket.

Definition at line 70 of file TLSSocket.h.

nsapi_size_or_error_t recv	(	void *	data,
		nsapi_size_t	size
	)		`[virtual, inherited]`

Receive data over a TCP socket.

The socket must be connected to a remote host. Returns the number of bytes received into the buffer.

By default, recv blocks until some data is received. If socket is set to non-blocking or times out, NSAPI_ERROR_WOULD_BLOCK can be returned to indicate no data.

Parameters:

data	Destination buffer for data received from the host
size	Size of the buffer in bytes

Return values:

int	Number of received bytes on success
NSAPI_ERROR_NO_SOCKET	in case socket was not created correctly
NSAPI_ERROR_WOULD_BLOCK	in case non-blocking mode is enabled and send cannot be performed immediately
int	Other negative error codes for stack-related failures. See NetworkStack::socket_recv.

Implements Socket.

Definition at line 201 of file TCPSocket.cpp.

nsapi_size_or_error_t recv	(	void *	data,
		nsapi_size_t	size
	)		`[virtual, inherited]`

Receive data over a TLS socket.

The socket must be connected to a remote host. Returns the number of bytes received into the buffer.

Parameters:

data	Destination buffer for data received from the host.
size	Size of the buffer in bytes.

Return values:

int	Number of sent bytes on success
NSAPI_ERROR_NO_SOCKET	in case socket was not created correctly.
NSAPI_ERROR_WOULD_BLOCK	in case non-blocking mode is enabled and send cannot be performed immediately.
NSAPI_ERROR_DEVICE_ERROR	in case of tls-related errors. See mbedtls_ssl_read.

Returns:: 0 if no data is available to be received and the peer has performed an orderly shutdown.

Implements Socket.

Definition at line 347 of file TLSSocketWrapper.cpp.

nsapi_size_or_error_t recvfrom	(	SocketAddress *	address,
		void *	data,
		nsapi_size_t	size
	)		`[virtual, inherited]`

Receive a data from a socket.

Receives a data and stores the source address in address if address is not NULL. Returns the number of bytes written into the buffer.

If socket is connected, only packets coming from connected peer address are accepted.

Note:: recvfrom() is allowed write to address and data buffers even if error occurs.

By default, recvfrom blocks until a datagram is received. If socket is set to non-blocking or times out with no data, NSAPI_ERROR_WOULD_BLOCK is returned.

Parameters:

address	Destination for the source address or NULL
data	Destination buffer for datagram received from the host
size	Size of the buffer in bytes

Returns:: Number of received bytes on success, negative subclass-dependent error code on failure

Implements Socket.

Definition at line 399 of file TLSSocketWrapper.cpp.

nsapi_size_or_error_t recvfrom	(	SocketAddress *	address,
		void *	data,
		nsapi_size_t	size
	)		`[virtual, inherited]`

Receive a data from a socket.

Receives a data and stores the source address in address if address is not NULL. Returns the number of bytes written into the buffer.

By default, recvfrom blocks until a data is received. If socket is set to non-blocking or times out with no datagram, NSAPI_ERROR_WOULD_BLOCK is returned.

Parameters:

address	Destination for the source address or NULL
data	Destination buffer for datagram received from the host
size	Size of the buffer in bytes

Return values:

int	Number of received bytes on success
NSAPI_ERROR_NO_SOCKET	in case socket was not created correctly
NSAPI_ERROR_WOULD_BLOCK	in case non-blocking mode is enabled and send cannot be performed immediately
int	Other negative error codes for stack-related failures. See NetworkStack::socket_recv.

Implements Socket.

Definition at line 249 of file TCPSocket.cpp.

nsapi_error_t send	(	const void *	data,
		nsapi_size_t	size
	)		`[virtual, inherited]`

Send data over a TLS socket.

The socket must be connected to a remote host. Returns the number of bytes sent from the buffer.

Parameters:

data	Buffer of data to send to the host.
size	Size of the buffer in bytes.

Return values:

int	Number of sent bytes on success
NSAPI_ERROR_NO_SOCKET	in case socket was not created correctly.
NSAPI_ERROR_WOULD_BLOCK	in case non-blocking mode is enabled and send cannot be performed immediately.
NSAPI_ERROR_DEVICE_ERROR	in case of tls-related errors. See mbedtls_ssl_write.

Implements Socket.

Definition at line 292 of file TLSSocketWrapper.cpp.

nsapi_size_or_error_t send	(	const void *	data,
		nsapi_size_t	size
	)		`[virtual, inherited]`

Send data over a TCP socket.

The socket must be connected to a remote host. Returns the number of bytes sent from the buffer.

By default, send blocks until all data is sent. If socket is set to non-blocking or times out, a partial amount can be written. NSAPI_ERROR_WOULD_BLOCK is returned if no data was written.

Parameters:

data	Buffer of data to send to the host
size	Size of the buffer in bytes

Return values:

int	Number of sent bytes on success
NSAPI_ERROR_NO_SOCKET	in case socket was not created correctly
NSAPI_ERROR_WOULD_BLOCK	in case non-blocking mode is enabled and send cannot be performed immediately
int	Other negative error codes for stack-related failures. See NetworkStack::socket_send.

Implements Socket.

Definition at line 129 of file TCPSocket.cpp.

nsapi_size_or_error_t sendto	(	const SocketAddress &	address,
		const void *	data,
		nsapi_size_t	size
	)		`[virtual, inherited]`

Send a message on a socket.

The sendto() function sends a message through a connection-mode or connectionless-mode socket. If the socket is a connectionless-mode socket, the message is sent to the address specified. If the socket is a connected-mode socket, address is ignored.

By default, sendto blocks until data is sent. If socket is set to non-blocking or times out, NSAPI_ERROR_WOULD_BLOCK is returned immediately.

Parameters:

address	Remote address
data	Buffer of data to send to the host
size	Size of the buffer in bytes

Returns:: Number of sent bytes on success, negative subclass-dependent error code on failure

Implements Socket.

Definition at line 341 of file TLSSocketWrapper.cpp.

nsapi_size_or_error_t sendto	(	const SocketAddress &	address,
		const void *	data,
		nsapi_size_t	size
	)		`[virtual, inherited]`

Send data on a socket.

TCP socket is connection oriented protocol, so address is ignored.

By default, sendto blocks until data is sent. If socket is set to non-blocking or times out, NSAPI_ERROR_WOULD_BLOCK is returned immediately.

Parameters:

address	Remote address
data	Buffer of data to send to the host
size	Size of the buffer in bytes

Return values:

int	Number of sent bytes on success
NSAPI_ERROR_NO_SOCKET	in case socket was not created correctly
NSAPI_ERROR_WOULD_BLOCK	in case non-blocking mode is enabled and send cannot be performed immediately
int	Other negative error codes for stack-related failures. See NetworkStack::socket_send.

Implements Socket.

Definition at line 195 of file TCPSocket.cpp.

void set_blocking ( bool blocking ) [virtual, inherited]

Set blocking or non-blocking mode of the socket.

Initially all sockets are in blocking mode. In non-blocking mode blocking operations such as send/recv/accept return NSAPI_ERROR_WOULD_BLOCK if they cannot continue.

set_blocking(false) is equivalent to set_timeout(0) set_blocking(true) is equivalent to set_timeout(-1)

Parameters:

blocking true for blocking mode, false for non-blocking mode.

Implements Socket.

Definition at line 152 of file InternetSocket.cpp.

void set_blocking ( bool blocking ) [virtual, inherited]

Set blocking or non-blocking mode of the socket.

Initially all sockets are in blocking mode. In non-blocking mode blocking operations such as send/recv/accept return NSAPI_ERROR_WOULD_BLOCK if they cannot continue.

set_blocking(false) is equivalent to set_timeout(0) set_blocking(true) is equivalent to set_timeout(-1)

Parameters:

blocking true for blocking mode, false for non-blocking mode.

Implements Socket.

Definition at line 643 of file TLSSocketWrapper.cpp.

void set_ca_chain ( mbedtls_x509_crt * crt ) [inherited]

Set CA chain directly to Mbed TLS.

Parameters:

crt	Mbed TLS X509 certificate chain.

Definition at line 535 of file TLSSocketWrapper.cpp.

nsapi_error_t set_client_cert_key	(	const char *	client_cert_pem,
		const char *	client_private_key_pem
	)		`[virtual]`

Sets client certificate, and client private key.

Parameters:

client_cert_pem	Client certification in PEM format.
client_private_key_pem	Client private key in PEM format.

Returns:: NSAPI_ERROR_OK on success, negative error code on failure.

Reimplemented from TLSSocketWrapper.

Definition at line 89 of file TLSSocket.cpp.

nsapi_error_t set_client_cert_key	(	const void *	client_cert,
		size_t	client_cert_len,
		const void *	client_private_key_pem,
		size_t	client_private_key_len
	)		`[virtual]`

Sets client certificate, and client private key.

Parameters:

client_cert	Client certification in PEM or DER format.
client_cert_len	Certificate size including the terminating null byte for PEM data.
client_private_key_pem	Client private key in PEM or DER format.
client_private_key_len	Key size including the terminating null byte for PEM data

Returns:: NSAPI_ERROR_OK on success, negative error code on failure.

Reimplemented from TLSSocketWrapper.

Definition at line 79 of file TLSSocket.cpp.

nsapi_error_t set_hostname ( const char * hostname )

Set hostname.

TLSSocket requires hostname used to verify the certificate. If hostname is not given in constructor, this function must be used before starting the TLS handshake.

Parameters:

hostname Hostname of the remote host, used for certificate checking.

Reimplemented from TLSSocketWrapper.

Definition at line 64 of file TLSSocket.cpp.

int set_own_cert ( mbedtls_x509_crt * crt ) [inherited]

Set own certificate directly to Mbed TLS.

Parameters:

crt	Mbed TLS X509 certificate chain.

Returns:: error code from mbedtls_ssl_conf_own_cert().

Definition at line 513 of file TLSSocketWrapper.cpp.

nsapi_error_t set_root_ca_cert	(	const void *	root_ca,
		size_t	len
	)		`[virtual]`

Sets the certification of Root CA.

Note:: Must be called after open() before calling connect()

Parameters:

root_ca	Root CA Certificate in any Mbed TLS-supported format.
len	Length of certificate (including terminating 0 for PEM).

Returns:: NSAPI_ERROR_OK on success, negative error code on failure.

Reimplemented from TLSSocketWrapper.

Definition at line 69 of file TLSSocket.cpp.

nsapi_error_t set_root_ca_cert ( const char * root_ca_pem ) [virtual]

Sets the certification of Root CA.

Note:: Must be called after open() before calling connect()

Parameters:

root_ca_pem Root CA Certificate in PEM format.

Reimplemented from TLSSocketWrapper.

Definition at line 74 of file TLSSocket.cpp.

void set_ssl_config ( mbedtls_ssl_config * conf ) [inherited]

Override Mbed TLS configuration.

Parameters:

conf	Mbed TLS SSL configuration structure.

Definition at line 574 of file TLSSocketWrapper.cpp.

void set_timeout ( int timeout ) [virtual, inherited]

Set timeout on blocking socket operations.

Initially all sockets have unbounded timeouts. NSAPI_ERROR_WOULD_BLOCK is returned if a blocking operation takes longer than the specified timeout. A timeout of 0 removes the timeout from the socket. A negative value gives the socket an unbounded timeout.

set_timeout(0) is equivalent to set_blocking(false) set_timeout(-1) is equivalent to set_blocking(true)

Parameters:

timeout Timeout in milliseconds

Implements Socket.

Definition at line 648 of file TLSSocketWrapper.cpp.

void set_timeout ( int timeout ) [virtual, inherited]

Set timeout on blocking socket operations.

Initially all sockets have unbounded timeouts. NSAPI_ERROR_WOULD_BLOCK is returned if a blocking operation takes longer than the specified timeout. A timeout of 0 removes the timeout from the socket. A negative value gives the socket an unbounded timeout.

set_timeout(0) is equivalent to set_blocking(false) set_timeout(-1) is equivalent to set_blocking(true)

Parameters:

timeout Timeout in milliseconds

Implements Socket.

Definition at line 158 of file InternetSocket.cpp.

nsapi_error_t setsockopt	(	int	level,
		int	optname,
		const void *	optval,
		unsigned	optlen
	)		`[virtual, inherited]`

Set socket options.

setsockopt() allows an application to pass stack-specific options to the underlying stack using stack-specific level and option names, or to request generic options using levels from nsapi_socket_level_t.

For unsupported options, NSAPI_ERROR_UNSUPPORTED is returned and the socket is unmodified.

Parameters:

level	Stack-specific protocol level or nsapi_socket_level_t.
optname	Level-specific option name.
optval	Option value.
optlen	Length of the option value.

Return values:

NSAPI_ERROR_OK	on success.
NSAPI_ERROR_NO_SOCKET	if socket is not open.
int	Negative error code on failure, see NetworkStack::setsockopt.

Implements Socket.

Definition at line 171 of file InternetSocket.cpp.

nsapi_error_t setsockopt	(	int	level,
		int	optname,
		const void *	optval,
		unsigned	optlen
	)		`[virtual, inherited]`

Set socket options.

setsockopt() allows an application to pass stack-specific options to the underlying stack using stack-specific level and option names, or to request generic options using levels from nsapi_socket_level_t.

For unsupported options, NSAPI_ERROR_UNSUPPORTED is returned and the socket is unmodified.

Parameters:

level	Stack-specific protocol level or nsapi_socket_level_t.
optname	Level-specific option name.
optval	Option value.
optlen	Length of the option value.

Return values:

NSAPI_ERROR_OK	on success.
NSAPI_ERROR_NO_SOCKET	if socket is not open.
int	Negative error code on failure, see NetworkStack::setsockopt.

Implements Socket.

Definition at line 667 of file TLSSocketWrapper.cpp.

void sigio ( mbed::Callback< void()> func ) [virtual, inherited]

Register a callback on state change of the socket.

The specified callback is called on state changes, such as when the socket can receive/send/accept successfully and when an error occurs. The callback may also be called spuriously without reason.

The callback may be called in an interrupt context and should not perform expensive operations such as receive/send calls.

Note! This is not intended as a replacement for a poll or attach-like asynchronous API, but rather as a building block for constructing such functionality. The exact timing of the registered function is not guaranteed and susceptible to change.

Parameters:

func	Function to call on state change.

Implements Socket.

Definition at line 658 of file TLSSocketWrapper.cpp.

virtual void sigio ( mbed::Callback< void()> func ) [virtual, inherited]

Register a callback on state change of the socket.

The specified callback is called on state changes, such as when the socket can receive/send/accept successfully and when an error occurs. The callback may also be called spuriously without reason.

The callback may be called in an interrupt context and should not perform expensive operations such as receive/send calls.

Note! This is not intended as a replacement for a poll or attach-like asynchronous API, but rather as a building block for constructing such functionality. The exact timing of the registered function is not guaranteed and susceptible to change.

Parameters:

func	Function to call on state change.

Implements Socket.

nsapi_error_t start_handshake ( bool first_call ) [protected, inherited]

Initiates TLS Handshake.

Initiates a TLS handshake to a remote peer. Underlying transport socket should already be connected.

Root CA certification must be set by set_ssl_ca_pem() before calling this function.

For non-blocking purposes, this functions needs to know whether this was a first call to Socket::connect() API so that NSAPI_ERROR_INPROGRESS does not happen twice.

Parameters:

first_call is this a first call to Socket::connect() API.

Return values:

NSAPI_ERROR_OK	if we happen to complete the request on the first call.
NSAPI_ERROR_IN_PROGRESS	if the first call did not complete the request.
NSAPI_ERROR_NO_SOCKET	in case the transport socket was not created correctly.
NSAPI_ERROR_AUTH_FAILURE	in case of tls-related authentication errors. See mbedtls_ctr_drbg_seed, mbedtls_ssl_setup. mbedtls_ssl_handshake.

Definition at line 165 of file TLSSocketWrapper.cpp.

Important changes to repositories hosted on mbed.com

TLSSocket Class Reference
[Netsocket]

Public Types

Public Member Functions

Protected Member Functions

Friends

Detailed Description

Member Enumeration Documentation

Constructor & Destructor Documentation

Member Function Documentation

Repository toolbox

Repository details

Important Information for this Arm website

Important changes to repositories hosted on mbed.com

TLSSocket Class Reference [Netsocket]

Public Types

Public Member Functions

Protected Member Functions

Friends

Detailed Description

Member Enumeration Documentation

Constructor & Destructor Documentation

Member Function Documentation

Repository toolbox

Repository details

Important Information for this Arm website

Access Warning

TLSSocket Class Reference
[Netsocket]