Camellia block cipher. More...

Data Structures
struct	mbedtls_camellia_context
	CAMELLIA context structure. More...
Typedefs
typedef struct mbedtls_camellia_context	mbedtls_camellia_context
	CAMELLIA context structure.
Functions
void	mbedtls_camellia_init (mbedtls_camellia_context *ctx)
	Initialize a CAMELLIA context.
void	mbedtls_camellia_free (mbedtls_camellia_context *ctx)
	Clear a CAMELLIA context.
int	mbedtls_camellia_setkey_enc (mbedtls_camellia_context ctx, const unsigned char key, unsigned int keybits)
	Perform a CAMELLIA key schedule operation for encryption.
int	mbedtls_camellia_setkey_dec (mbedtls_camellia_context ctx, const unsigned char key, unsigned int keybits)
	Perform a CAMELLIA key schedule operation for decryption.
int	mbedtls_camellia_crypt_ecb (mbedtls_camellia_context *ctx, int mode, const unsigned char input[16], unsigned char output[16])
	Perform a CAMELLIA-ECB block encryption/decryption operation.
int	mbedtls_camellia_crypt_cbc (mbedtls_camellia_context ctx, int mode, size_t length, unsigned char iv[16], const unsigned char input, unsigned char *output)
	Perform a CAMELLIA-CBC buffer encryption/decryption operation.
int	mbedtls_camellia_crypt_cfb128 (mbedtls_camellia_context ctx, int mode, size_t length, size_t iv_off, unsigned char iv[16], const unsigned char input, unsigned char output)
	Perform a CAMELLIA-CFB128 buffer encryption/decryption operation.
int	mbedtls_camellia_crypt_ctr (mbedtls_camellia_context ctx, size_t length, size_t nc_off, unsigned char nonce_counter[16], unsigned char stream_block[16], const unsigned char input, unsigned char output)
	Perform a CAMELLIA-CTR buffer encryption/decryption operation.
int	mbedtls_camellia_self_test (int verbose)
	Checkup routine.

Detailed Description

Camellia block cipher.

Definition in file camellia.h.

Typedef Documentation

typedef struct mbedtls_camellia_context mbedtls_camellia_context

CAMELLIA context structure.

Function Documentation

int mbedtls_camellia_crypt_cbc	(	mbedtls_camellia_context *	ctx,
		int	mode,
		size_t	length,
		unsigned char	iv[16],
		const unsigned char *	input,
		unsigned char *	output
	)

Perform a CAMELLIA-CBC buffer encryption/decryption operation.

Note:: Upon exit, the content of the IV is updated so that you can call the function same function again on the following block(s) of data and get the same result as if it was encrypted in one call. This allows a "streaming" usage. If on the other hand you need to retain the contents of the IV, you should either save it manually or use the cipher module instead.

Parameters:

ctx	The CAMELLIA context to use. This must be initialized and bound to a key.
mode	The mode of operation. This must be either MBEDTLS_CAMELLIA_ENCRYPT or MBEDTLS_CAMELLIA_DECRYPT.
length	The length in Bytes of the input data `input`. This must be a multiple of `16` Bytes.
iv	The initialization vector. This must be a read/write buffer of length `16` Bytes. It is updated to allow streaming use as explained above.
input	The buffer holding the input data. This must point to a readable buffer of length `length` Bytes.
output	The buffer holding the output data. This must point to a writable buffer of length `length` Bytes.

Returns:: 0 if successful.; A negative error code on failure.

Definition at line 573 of file camellia.c.

int mbedtls_camellia_crypt_cfb128	(	mbedtls_camellia_context *	ctx,
		int	mode,
		size_t	length,
		size_t *	iv_off,
		unsigned char	iv[16],
		const unsigned char *	input,
		unsigned char *	output
	)

Perform a CAMELLIA-CFB128 buffer encryption/decryption operation.

Note:: Due to the nature of CFB mode, you should use the same key for both encryption and decryption. In particular, calls to this function should be preceded by a key-schedule via mbedtls_camellia_setkey_enc() regardless of whether mode is MBEDTLS_CAMELLIA_ENCRYPT or MBEDTLS_CAMELLIA_DECRYPT.; Upon exit, the content of the IV is updated so that you can call the function same function again on the following block(s) of data and get the same result as if it was encrypted in one call. This allows a "streaming" usage. If on the other hand you need to retain the contents of the IV, you should either save it manually or use the cipher module instead.

Parameters:

ctx	The CAMELLIA context to use. This must be initialized and bound to a key.
mode	The mode of operation. This must be either MBEDTLS_CAMELLIA_ENCRYPT or MBEDTLS_CAMELLIA_DECRYPT.
length	The length of the input data `input`. Any value is allowed.
iv_off	The current offset in the IV. This must be smaller than `16` Bytes. It is updated after this call to allow the aforementioned streaming usage.
iv	The initialization vector. This must be a read/write buffer of length `16` Bytes. It is updated after this call to allow the aforementioned streaming usage.
input	The buffer holding the input data. This must be a readable buffer of size `length` Bytes.
output	The buffer to hold the output data. This must be a writable buffer of length `length` Bytes.

Returns:: 0 if successful.; A negative error code on failure.

Definition at line 633 of file camellia.c.

int mbedtls_camellia_crypt_ctr	(	mbedtls_camellia_context *	ctx,
		size_t	length,
		size_t *	nc_off,
		unsigned char	nonce_counter[16],
		unsigned char	stream_block[16],
		const unsigned char *	input,
		unsigned char *	output
	)

Perform a CAMELLIA-CTR buffer encryption/decryption operation.

*note Due to the nature of CTR mode, you should use the same key for both encryption and decryption. In particular, calls to this function should be preceded by a key-schedule via mbedtls_camellia_setkey_enc() regardless of whether mode is MBEDTLS_CAMELLIA_ENCRYPT or MBEDTLS_CAMELLIA_DECRYPT.

Warning:: You must never reuse a nonce value with the same key. Doing so would void the encryption for the two messages encrypted with the same nonce and key.

There are two common strategies for managing nonces with CTR:

1. You can handle everything as a single message processed over successive calls to this function. In that case, you want to set nonce_counter and nc_off to 0 for the first call, and then preserve the values of nonce_counter, nc_off and stream_block across calls to this function as they will be updated by this function.

With this strategy, you must not encrypt more than 2**128 blocks of data with the same key.

2. You can encrypt separate messages by dividing the nonce_counter buffer in two areas: the first one used for a per-message nonce, handled by yourself, and the second one updated by this function internally.

For example, you might reserve the first 12 Bytes for the per-message nonce, and the last 4 Bytes for internal use. In that case, before calling this function on a new message you need to set the first 12 Bytes of nonce_counter to your chosen nonce value, the last four to 0, and nc_off to 0 (which will cause stream_block to be ignored). That way, you can encrypt at most 2**96 messages of up to 2**32 blocks each with the same key.

The per-message nonce (or information sufficient to reconstruct it) needs to be communicated with the ciphertext and must be unique. The recommended way to ensure uniqueness is to use a message counter. An alternative is to generate random nonces, but this limits the number of messages that can be securely encrypted: for example, with 96-bit random nonces, you should not encrypt more than 2**32 messages with the same key.

Note that for both stategies, sizes are measured in blocks and that a CAMELLIA block is 16 Bytes.

Warning:: Upon return, stream_block contains sensitive data. Its content must not be written to insecure storage and should be securely discarded as soon as it's no longer needed.

Parameters:

ctx	The CAMELLIA context to use. This must be initialized and bound to a key.
length	The length of the input data `input` in Bytes. Any value is allowed.
nc_off	The offset in the current `stream_block` (for resuming within current cipher stream). The offset pointer to should be `0` at the start of a stream. It is updated at the end of this call.
nonce_counter	The 128-bit nonce and counter. This must be a read/write buffer of length `16` Bytes.
stream_block	The saved stream-block for resuming. This must be a read/write buffer of length `16` Bytes.
input	The input data stream. This must be a readable buffer of size `length` Bytes.
output	The output data stream. This must be a writable buffer of size `length` Bytes.

Returns:: 0 if successful.; A negative error code on failure.

Definition at line 692 of file camellia.c.

int mbedtls_camellia_crypt_ecb	(	mbedtls_camellia_context *	ctx,
		int	mode,
		const unsigned char	input[16],
		unsigned char	output[16]
	)

Perform a CAMELLIA-ECB block encryption/decryption operation.

Parameters:

ctx	The CAMELLIA context to use. This must be initialized and bound to a key.
mode	The mode of operation. This must be either MBEDTLS_CAMELLIA_ENCRYPT or MBEDTLS_CAMELLIA_DECRYPT.
input	The input block. This must be a readable buffer of size `16` Bytes.
output	The output block. This must be a writable buffer of size `16` Bytes.

Returns:: 0 if successful.; A negative error code on failure.

Definition at line 505 of file camellia.c.

void mbedtls_camellia_free ( mbedtls_camellia_context * ctx )

Clear a CAMELLIA context.

Parameters:

ctx	The CAMELLIA context to be cleared. This may be `NULL`, in which case this function returns immediately. If it is not `NULL`, it must be initialized.

Definition at line 334 of file camellia.c.

void mbedtls_camellia_init ( mbedtls_camellia_context * ctx )

Initialize a CAMELLIA context.

Parameters:

ctx	The CAMELLIA context to be initialized. This must not be `NULL`.

Definition at line 328 of file camellia.c.

int mbedtls_camellia_self_test ( int verbose )

Checkup routine.

Returns:: 0 if successful, or 1 if the test failed

Definition at line 936 of file camellia.c.

int mbedtls_camellia_setkey_dec	(	mbedtls_camellia_context *	ctx,
		const unsigned char *	key,
		unsigned int	keybits
	)

Perform a CAMELLIA key schedule operation for decryption.

Parameters:

ctx	The CAMELLIA context to use. This must be initialized.
key	The decryption key. This must be a readable buffer of size `keybits` Bits.
keybits	The length of `key` in Bits. This must be either `128`, `192` or `256`.

Returns:: 0 if successful.; A negative error code on failure.

Definition at line 454 of file camellia.c.

int mbedtls_camellia_setkey_enc	(	mbedtls_camellia_context *	ctx,
		const unsigned char *	key,
		unsigned int	keybits
	)

Perform a CAMELLIA key schedule operation for encryption.

Parameters:

ctx	The CAMELLIA context to use. This must be initialized.
key	The encryption key to use. This must be a readable buffer of size `keybits` Bits.
keybits	The length of `key` in Bits. This must be either `128`, `192` or `256`.

Returns:: 0 if successful.; A negative error code on failure.

Definition at line 345 of file camellia.c.

Type:	Library
Created:	17 Dec 2019
Imports:	79
Forks:	0
Commits:	2
Dependents:	2
Dependencies:	0
Followers:	1

Important changes to repositories hosted on mbed.com

camellia.h File Reference

Data Structures

Typedefs

Functions

Detailed Description

Typedef Documentation

Function Documentation

Repository toolbox

Repository details

Important Information for this Arm website

Important changes to repositories hosted on mbed.com

camellia.h File Reference

Data Structures

Typedefs

Functions

Detailed Description

Typedef Documentation

Function Documentation

Repository toolbox

Repository details

Important Information for this Arm website

Access Warning