Diff: hal/static_pinmap.cpp

Revision:

1:9db0e321a9f4

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/hal/static_pinmap.cpp	Tue Dec 31 06:02:27 2019 +0000
@@ -0,0 +1,96 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2019 ARM Limited
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include "mbed_error.h"
+#include "static_pinmap.h"
+
+
+/*
+ * This file provides default definitions of xxx_direct() functions for peripherals.
+ * in all cases standard init function is called, which won't give any ROM memory savings.
+ *
+ */
+
+#if DEVICE_SPI
+MBED_WEAK void spi_init_direct(spi_t *obj, const spi_pinmap_t *pinmap)
+{
+    spi_init(obj, pinmap->mosi_pin, pinmap->miso_pin, pinmap->sclk_pin, pinmap->ssel_pin);
+}
+#endif
+
+#if DEVICE_PWMOUT
+MBED_WEAK void pwmout_init_direct(pwmout_t *obj, const PinMap *pinmap)
+{
+    pwmout_init(obj, pinmap->pin);
+}
+#endif
+
+#if DEVICE_ANALOGIN
+MBED_WEAK void analogin_init_direct(analogin_t *obj, const PinMap *pinmap)
+{
+    analogin_init(obj, pinmap->pin);
+}
+#endif
+
+#if DEVICE_ANALOGOUT
+MBED_WEAK void analogout_init_direct(dac_t *obj, const PinMap *pinmap)
+{
+    analogout_init(obj, pinmap->pin);
+}
+#endif
+
+#if DEVICE_I2C
+MBED_WEAK void i2c_init_direct(i2c_t *obj, const i2c_pinmap_t *pinmap)
+{
+    i2c_init(obj, pinmap->sda_pin, pinmap->scl_pin);
+}
+#endif
+
+#if DEVICE_SERIAL
+MBED_WEAK void serial_init_direct(serial_t *obj, const serial_pinmap_t *pinmap)
+{
+    serial_init(obj, pinmap->tx_pin, pinmap->rx_pin);
+}
+
+#if DEVICE_SERIAL_FC
+MBED_WEAK void serial_set_flow_control_direct(serial_t *obj, FlowControl type, const serial_fc_pinmap_t *pinmap)
+{
+    serial_set_flow_control(obj, type, pinmap->rx_flow_pin, pinmap->tx_flow_pin);
+}
+#endif
+
+#if DEVICE_CAN
+MBED_WEAK void can_init_freq_direct(can_t *obj, const can_pinmap_t *pinmap, int hz)
+{
+    can_init_freq(obj, pinmap->rd_pin, pinmap->td_pin, hz);
+}
+
+MBED_WEAK void can_init_direct(can_t *obj, const can_pinmap_t *pinmap)
+{
+    can_init(obj, pinmap->rd_pin, pinmap->td_pin);
+}
+
+#endif
+
+#if DEVICE_QSPI
+MBED_WEAK qspi_status_t qspi_init_direct(qspi_t *obj, const qspi_pinmap_t *pinmap, uint32_t hz, uint8_t mode)
+{
+    return qspi_init(obj, pinmap->data0_pin, pinmap->data1_pin, pinmap->data2_pin, pinmap->data3_pin, pinmap->sclk_pin, pinmap->ssel_pin, hz, mode);
+}
+#endif
+
+#endif