Kenji Arai
Added TARGET_DISCO_F469NI in USBHOST\USBHost\TARGET_STM\USBHALHost_STM_TARGET.h
Dependents: DISCO-F469NI_USB_Disk STM32F4xx_USB_Memory
Diff: USBHost/USBHost.cpp
- Revision:
- 5:fc157e6bd5a5
- Parent:
- 1:ab240722d7ef
- Child:
- 8:3e7a33f81048
--- a/USBHost/USBHost.cpp Fri Feb 17 12:40:57 2017 +0100
+++ b/USBHost/USBHost.cpp Wed Apr 26 18:11:37 2017 +0200
@@ -46,7 +46,8 @@
* - when the usb_thread receives the event, it:
* - call the callback attached to the endpoint where the td is attached
*/
-void USBHost::usb_process() {
+void USBHost::usb_process()
+{
bool controlListState;
bool bulkListState;
@@ -79,110 +80,123 @@
too_many_hub = false;
buf[4] = 0;
- do
- {
- Lock lock(this);
+ do {
+ Lock lock(this);
+ bool hub_unplugged = true;
- for (i = 0; i < MAX_DEVICE_CONNECTED; i++) {
- if (!deviceInUse[i]) {
- USB_DBG_EVENT("new device connected: %p\r\n", &devices[i]);
- devices[i].init(usb_msg->hub, usb_msg->port, usb_msg->lowSpeed);
- deviceReset[i] = false;
- deviceInited[i] = true;
- break;
- }
- }
+ int idx = findDevice(usb_msg->hub, usb_msg->port, (USBHostHub *)(usb_msg->hub_parent));
+ /* check that hub is connected to root port */
+ if (usb_msg->hub_parent) {
+ /* a hub device must be present */
+ for (k = 0; k < MAX_HUB_NB; k++) {
+ if ((&hubs[k] == usb_msg->hub_parent) && (hub_in_use[k]))
+ hub_unplugged=false;
+ }
+ } else hub_unplugged = false;
- if (i == MAX_DEVICE_CONNECTED) {
- USB_ERR("Too many device connected!!\r\n");
- continue;
- }
+ if (((idx!=-1) && deviceInUse[idx] ) || ((idx == -1) && hub_unplugged))
+ break;
- if (!controlEndpointAllocated) {
- control = newEndpoint(CONTROL_ENDPOINT, OUT, 0x08, 0x00);
- addEndpoint(NULL, 0, (USBEndpoint*)control);
- controlEndpointAllocated = true;
- }
+ for (i =0 ; i < MAX_DEVICE_CONNECTED; i++) {
+ if (!deviceInUse[i]) {
+ USB_DBG_EVENT("new device connected: %p\r\n", &devices[i]);
+ devices[i].init(usb_msg->hub, usb_msg->port, usb_msg->lowSpeed);
+ deviceReset[i] = false;
+ deviceInited[i] = true;
+ break;
+ }
+ }
- #if MAX_HUB_NB
- if (usb_msg->hub_parent)
- devices[i].setHubParent((USBHostHub *)(usb_msg->hub_parent));
- #endif
+ if (i == MAX_DEVICE_CONNECTED) {
+ USB_ERR("Too many device connected!!\r\n");
+ continue;
+ }
- for (j = 0; j < timeout_set_addr; j++) {
-
- resetDevice(&devices[i]);
-
- // set size of control endpoint
- devices[i].setSizeControlEndpoint(8);
+ if (!controlEndpointAllocated) {
+ control = newEndpoint(CONTROL_ENDPOINT, OUT, 0x08, 0x00);
+ addEndpoint(NULL, 0, (USBEndpoint*)control);
+ controlEndpointAllocated = true;
+ }
- devices[i].activeAddress(false);
+#if MAX_HUB_NB
+ if (usb_msg->hub_parent)
+ devices[i].setHubParent((USBHostHub *)(usb_msg->hub_parent));
+#endif
- // get first 8 bit of device descriptor
- // and check if we deal with a hub
- USB_DBG("usb_thread read device descriptor on dev: %p\r\n", &devices[i]);
- res = getDeviceDescriptor(&devices[i], buf, 8);
+ for (j = 0; j < timeout_set_addr; j++) {
+
+ resetDevice(&devices[i]);
- if (res != USB_TYPE_OK) {
- USB_ERR("usb_thread could not read dev descr");
- continue;
- }
+ // set size of control endpoint
+ devices[i].setSizeControlEndpoint(8);
+
+ devices[i].activeAddress(false);
- // set size of control endpoint
- devices[i].setSizeControlEndpoint(buf[7]);
+ // get first 8 bit of device descriptor
+ // and check if we deal with a hub
+ USB_DBG("usb_thread read device descriptor on dev: %p\r\n", &devices[i]);
+ res = getDeviceDescriptor(&devices[i], buf, 8);
- // second step: set an address to the device
- res = setAddress(&devices[i], devices[i].getAddress());
+ if (res != USB_TYPE_OK) {
+ USB_ERR("usb_thread could not read dev descr");
+ continue;
+ }
- if (res != USB_TYPE_OK) {
- USB_ERR("SET ADDR FAILED");
- continue;
- }
- devices[i].activeAddress(true);
- USB_DBG("Address of %p: %d", &devices[i], devices[i].getAddress());
+ // set size of control endpoint
+ devices[i].setSizeControlEndpoint(buf[7]);
+
+ // second step: set an address to the device
+ res = setAddress(&devices[i], devices[i].getAddress());
- // try to read again the device descriptor to check if the device
- // answers to its new address
- res = getDeviceDescriptor(&devices[i], buf, 8);
+ if (res != USB_TYPE_OK) {
+ USB_ERR("SET ADDR FAILED");
+ continue;
+ }
+ devices[i].activeAddress(true);
+ USB_DBG("Address of %p: %d", &devices[i], devices[i].getAddress());
- if (res == USB_TYPE_OK) {
- break;
- }
+ // try to read again the device descriptor to check if the device
+ // answers to its new address
+ res = getDeviceDescriptor(&devices[i], buf, 8);
- Thread::wait(100);
- }
+ if (res == USB_TYPE_OK) {
+ break;
+ }
- USB_INFO("New device connected: %p [hub: %d - port: %d]", &devices[i], usb_msg->hub, usb_msg->port);
+ Thread::wait(100);
+ }
- #if MAX_HUB_NB
- if (buf[4] == HUB_CLASS) {
- for (k = 0; k < MAX_HUB_NB; k++) {
- if (hub_in_use[k] == false) {
- for (uint8_t j = 0; j < MAX_TRY_ENUMERATE_HUB; j++) {
- if (hubs[k].connect(&devices[i])) {
- devices[i].hub = &hubs[k];
- hub_in_use[k] = true;
- break;
- }
- }
- if (hub_in_use[k] == true)
- break;
- }
- }
+ USB_INFO("New device connected: %p [hub: %d - port: %d]", &devices[i], usb_msg->hub, usb_msg->port);
- if (k == MAX_HUB_NB) {
- USB_ERR("Too many hubs connected!!\r\n");
- too_many_hub = true;
- }
- }
+#if MAX_HUB_NB
+ if (buf[4] == HUB_CLASS) {
+ for (k = 0; k < MAX_HUB_NB; k++) {
+ if (hub_in_use[k] == false) {
+ for (uint8_t j = 0; j < MAX_TRY_ENUMERATE_HUB; j++) {
+ if (hubs[k].connect(&devices[i])) {
+ devices[i].hub = &hubs[k];
+ hub_in_use[k] = true;
+ break;
+ }
+ }
+ if (hub_in_use[k] == true)
+ break;
+ }
+ }
- if (usb_msg->hub_parent)
- ((USBHostHub *)(usb_msg->hub_parent))->deviceConnected(&devices[i]);
- #endif
+ if (k == MAX_HUB_NB) {
+ USB_ERR("Too many hubs connected!!\r\n");
+ too_many_hub = true;
+ }
+ }
- if ((i < MAX_DEVICE_CONNECTED) && !too_many_hub) {
- deviceInUse[i] = true;
- }
+ if (usb_msg->hub_parent)
+ ((USBHostHub *)(usb_msg->hub_parent))->deviceConnected(&devices[i]);
+#endif
+
+ if ((i < MAX_DEVICE_CONNECTED) && !too_many_hub) {
+ deviceInUse[i] = true;
+ }
} while(0);
@@ -191,22 +205,22 @@
// a device has been disconnected
case DEVICE_DISCONNECTED_EVENT:
- do
- {
- Lock lock(this);
+ do {
+ Lock lock(this);
- controlListState = disableList(CONTROL_ENDPOINT);
- bulkListState = disableList(BULK_ENDPOINT);
- interruptListState = disableList(INTERRUPT_ENDPOINT);
+ controlListState = disableList(CONTROL_ENDPOINT);
+ bulkListState = disableList(BULK_ENDPOINT);
+ interruptListState = disableList(INTERRUPT_ENDPOINT);
- idx = findDevice(usb_msg->hub, usb_msg->port, (USBHostHub *)(usb_msg->hub_parent));
- if (idx != -1) {
- freeDevice((USBDeviceConnected*)&devices[idx]);
- }
+ idx = findDevice(usb_msg->hub, usb_msg->port, (USBHostHub *)(usb_msg->hub_parent));
+ if (idx != -1) {
+ freeDevice((USBDeviceConnected*)&devices[idx]);
+ deviceInited[idx]=false;
+ }
- if (controlListState) enableList(CONTROL_ENDPOINT);
- if (bulkListState) enableList(BULK_ENDPOINT);
- if (interruptListState) enableList(INTERRUPT_ENDPOINT);
+ if (controlListState) enableList(CONTROL_ENDPOINT);
+ if (bulkListState) enableList(BULK_ENDPOINT);
+ if (interruptListState) enableList(INTERRUPT_ENDPOINT);
} while(0);
@@ -236,6 +250,12 @@
if (deviceInUse[idx]) {
USB_WARN("td %p processed but not in idle state: %s [ep: %p - dev: %p - %s]", usb_msg->td_addr, ep->getStateString(), ep, ep->dev, ep->dev->getName(ep->getIntfNb()));
ep->setState(USB_TYPE_IDLE);
+ /* as error, on interrupt endpoint can be
+ * reported, call the call back registered ,
+ * if device still in use, this call back
+ * shall ask again an interrupt request.
+ */
+ ep->call();
}
}
}
@@ -282,12 +302,12 @@
USBHost::Lock::Lock(USBHost* pHost) : m_pHost(pHost)
{
- m_pHost->usb_mutex.lock();
+ m_pHost->usb_mutex.lock();
}
USBHost::Lock::~Lock()
{
- m_pHost->usb_mutex.unlock();
+ m_pHost->usb_mutex.unlock();
}
void USBHost::transferCompleted(volatile uint32_t addr)
@@ -340,7 +360,7 @@
usb_msg->td_state = state;
mail_usb_event.put(usb_msg);
}
- ep->setState(state);
+ ep->setState((USB_TYPE)state);
ep->ep_queue.put((uint8_t*)1);
}
}
@@ -363,12 +383,16 @@
/* virtual */ void USBHost::deviceConnected(int hub, int port, bool lowSpeed, USBHostHub * hub_parent)
{
// be sure that the new device connected is not already connected...
+ disableList(CONTROL_ENDPOINT);
+
int idx = findDevice(hub, port, hub_parent);
if (idx != -1) {
- if (deviceInited[idx])
+ if (deviceInited[idx]) {
+ enableList(CONTROL_ENDPOINT);
+
return;
+ }
}
-
message_t * usb_msg = mail_usb_event.alloc();
usb_msg->event_id = DEVICE_CONNECTED_EVENT;
usb_msg->hub = hub;
@@ -376,6 +400,9 @@
usb_msg->lowSpeed = lowSpeed;
usb_msg->hub_parent = hub_parent;
mail_usb_event.put(usb_msg);
+ enableList(CONTROL_ENDPOINT);
+
+
}
/*
@@ -385,11 +412,17 @@
/* virtual */ void USBHost::deviceDisconnected(int hub, int port, USBHostHub * hub_parent, volatile uint32_t addr)
{
// be sure that the device disconnected is connected...
+
+ disableList(CONTROL_ENDPOINT);
+
int idx = findDevice(hub, port, hub_parent);
if (idx != -1) {
- if (!deviceInUse[idx])
+ if (!deviceInUse[idx]) {
+ enableList(CONTROL_ENDPOINT);
return;
+ }
} else {
+ enableList(CONTROL_ENDPOINT);
return;
}
@@ -399,6 +432,9 @@
usb_msg->port = port;
usb_msg->hub_parent = hub_parent;
mail_usb_event.put(usb_msg);
+ enableList(CONTROL_ENDPOINT);
+
+
}
void USBHost::freeDevice(USBDeviceConnected * dev)
@@ -695,14 +731,14 @@
volatile HCTD * hctd = NULL;
const char * type_str = (type == BULK_ENDPOINT) ? "BULK" :
((type == INTERRUPT_ENDPOINT) ? "INTERRUPT" :
- ((type == CONTROL_ENDPOINT) ? "CONTROL" : "ISOCHRONOUS"));
+ ((type == CONTROL_ENDPOINT) ? "CONTROL" : "ISOCHRONOUS"));
printf("State of %s:\r\n", type_str);
while (hced != NULL) {
uint8_t dir = ((hced->control & (3 << 11)) >> 11);
printf("hced: %p [ADDR: %d, DIR: %s, EP_NB: 0x%X]\r\n", hced,
- hced->control & 0x7f,
- (dir == 1) ? "OUT" : ((dir == 0) ? "FROM_TD":"IN"),
- (hced->control & (0xf << 7)) >> 7);
+ hced->control & 0x7f,
+ (dir == 1) ? "OUT" : ((dir == 0) ? "FROM_TD":"IN"),
+ (hced->control & (0xf << 7)) >> 7);
hctd = (HCTD *)((uint32_t)(hced->headTD) & ~(0xf));
while (hctd != hced->tailTD) {
printf("\thctd: %p [DIR: %s]\r\n", hctd, ((hctd->control & (3 << 19)) >> 19) == 1 ? "OUT" : "IN");
@@ -720,7 +756,7 @@
USB_TYPE USBHost::addTransfer(USBEndpoint * ed, uint8_t * buf, uint32_t len)
{
USB_TYPE ret=USB_TYPE_PROCESSING;
- td_mutex.lock();
+ td_mutex.lock();
// allocate a TD which will be freed in TDcompletion
volatile HCTD * td = ed->getNextTD();
@@ -728,7 +764,7 @@
return USB_TYPE_ERROR;
}
-#ifndef USBHOST_OTHER
+#ifndef USBHOST_OTHER
uint32_t token = (ed->isSetup() ? TD_SETUP : ( (ed->getDir() == IN) ? TD_IN : TD_OUT ));
uint32_t td_toggle;
@@ -754,10 +790,10 @@
printList(type);
enableList(type);
#else
- /* call method specific for endpoint */
- td->currBufPtr = buf;
- td->size = len;
- ret = ed->queueTransfer();
+ /* call method specific for endpoint */
+ td->currBufPtr = buf;
+ td->size = len;
+ ret = ed->queueTransfer();
#endif
td_mutex.unlock();
@@ -770,10 +806,10 @@
USB_TYPE USBHost::getDeviceDescriptor(USBDeviceConnected * dev, uint8_t * buf, uint16_t max_len_buf, uint16_t * len_dev_descr)
{
USB_TYPE t = controlRead( dev,
- USB_DEVICE_TO_HOST | USB_RECIPIENT_DEVICE,
- GET_DESCRIPTOR,
- (DEVICE_DESCRIPTOR << 8) | (0),
- 0, buf, MIN(DEVICE_DESCRIPTOR_LENGTH, max_len_buf));
+ USB_DEVICE_TO_HOST | USB_RECIPIENT_DEVICE,
+ GET_DESCRIPTOR,
+ (DEVICE_DESCRIPTOR << 8) | (0),
+ 0, buf, MIN(DEVICE_DESCRIPTOR_LENGTH, max_len_buf));
if (len_dev_descr)
*len_dev_descr = MIN(DEVICE_DESCRIPTOR_LENGTH, max_len_buf);
@@ -812,7 +848,8 @@
}
-USB_TYPE USBHost::setAddress(USBDeviceConnected * dev, uint8_t address) {
+USB_TYPE USBHost::setAddress(USBDeviceConnected * dev, uint8_t address)
+{
return controlWrite( dev,
USB_HOST_TO_DEVICE | USB_RECIPIENT_DEVICE,
SET_ADDRESS,
@@ -830,7 +867,8 @@
0, NULL, 0);
}
-uint8_t USBHost::numberDriverAttached(USBDeviceConnected * dev) {
+uint8_t USBHost::numberDriverAttached(USBDeviceConnected * dev)
+{
int index = findDevice(dev);
uint8_t cnt = 0;
if (index == -1)
@@ -848,76 +886,75 @@
uint16_t total_conf_descr_length = 0;
USB_TYPE res;
- do
- {
- Lock lock(this);
+ do {
+ Lock lock(this);
- // don't enumerate a device which all interfaces are registered to a specific driver
- int index = findDevice(dev);
+ // don't enumerate a device which all interfaces are registered to a specific driver
+ int index = findDevice(dev);
- if (index == -1) {
- return USB_TYPE_ERROR;
- }
+ if (index == -1) {
+ return USB_TYPE_ERROR;
+ }
- uint8_t nb_intf_attached = numberDriverAttached(dev);
- USB_DBG("dev: %p nb_intf: %d", dev, dev->getNbIntf());
- USB_DBG("dev: %p nb_intf_attached: %d", dev, nb_intf_attached);
- if ((nb_intf_attached != 0) && (dev->getNbIntf() == nb_intf_attached)) {
- USB_DBG("Don't enumerate dev: %p because all intf are registered with a driver", dev);
- return USB_TYPE_OK;
- }
+ uint8_t nb_intf_attached = numberDriverAttached(dev);
+ USB_DBG("dev: %p nb_intf: %d", dev, dev->getNbIntf());
+ USB_DBG("dev: %p nb_intf_attached: %d", dev, nb_intf_attached);
+ if ((nb_intf_attached != 0) && (dev->getNbIntf() == nb_intf_attached)) {
+ USB_DBG("Don't enumerate dev: %p because all intf are registered with a driver", dev);
+ return USB_TYPE_OK;
+ }
+
+ USB_DBG("Enumerate dev: %p", dev);
- USB_DBG("Enumerate dev: %p", dev);
-
- // third step: get the whole device descriptor to see vid, pid
- res = getDeviceDescriptor(dev, data, DEVICE_DESCRIPTOR_LENGTH);
+ // third step: get the whole device descriptor to see vid, pid
+ res = getDeviceDescriptor(dev, data, DEVICE_DESCRIPTOR_LENGTH);
- if (res != USB_TYPE_OK) {
- USB_DBG("GET DEV DESCR FAILED");
- return res;
- }
+ if (res != USB_TYPE_OK) {
+ USB_DBG("GET DEV DESCR FAILED");
+ return res;
+ }
+
+ dev->setClass(data[4]);
+ dev->setSubClass(data[5]);
+ dev->setProtocol(data[6]);
+ dev->setVid(data[8] | (data[9] << 8));
+ dev->setPid(data[10] | (data[11] << 8));
+ USB_DBG("CLASS: %02X \t VID: %04X \t PID: %04X", data[4], data[8] | (data[9] << 8), data[10] | (data[11] << 8));
- dev->setClass(data[4]);
- dev->setSubClass(data[5]);
- dev->setProtocol(data[6]);
- dev->setVid(data[8] | (data[9] << 8));
- dev->setPid(data[10] | (data[11] << 8));
- USB_DBG("CLASS: %02X \t VID: %04X \t PID: %04X", data[4], data[8] | (data[9] << 8), data[10] | (data[11] << 8));
+ pEnumerator->setVidPid( data[8] | (data[9] << 8), data[10] | (data[11] << 8) );
- pEnumerator->setVidPid( data[8] | (data[9] << 8), data[10] | (data[11] << 8) );
+ res = getConfigurationDescriptor(dev, data, sizeof(data), &total_conf_descr_length);
+ if (res != USB_TYPE_OK) {
+ return res;
+ }
- res = getConfigurationDescriptor(dev, data, sizeof(data), &total_conf_descr_length);
- if (res != USB_TYPE_OK) {
- return res;
- }
+#if (DEBUG > 3)
+ USB_DBG("CONFIGURATION DESCRIPTOR:\r\n");
+ for (int i = 0; i < total_conf_descr_length; i++)
+ printf("%02X ", data[i]);
+ printf("\r\n\r\n");
+#endif
- #if (DEBUG > 3)
- USB_DBG("CONFIGURATION DESCRIPTOR:\r\n");
- for (int i = 0; i < total_conf_descr_length; i++)
- printf("%02X ", data[i]);
- printf("\r\n\r\n");
- #endif
+ // Parse the configuration descriptor
+ parseConfDescr(dev, data, total_conf_descr_length, pEnumerator);
- // Parse the configuration descriptor
- parseConfDescr(dev, data, total_conf_descr_length, pEnumerator);
+ // only set configuration if not enumerated before
+ if (!dev->isEnumerated()) {
- // only set configuration if not enumerated before
- if (!dev->isEnumerated()) {
-
- USB_DBG("Set configuration 1 on dev: %p", dev);
- // sixth step: set configuration (only 1 supported)
- res = setConfiguration(dev, 1);
+ USB_DBG("Set configuration 1 on dev: %p", dev);
+ // sixth step: set configuration (only 1 supported)
+ res = setConfiguration(dev, 1);
- if (res != USB_TYPE_OK) {
- USB_DBG("SET CONF FAILED");
- return res;
- }
- }
+ if (res != USB_TYPE_OK) {
+ USB_DBG("SET CONF FAILED");
+ return res;
+ }
+ }
- dev->setEnumerated();
+ dev->setEnumerated();
- // Now the device is enumerated!
- USB_DBG("dev %p is enumerated\r\n", dev);
+ // Now the device is enumerated!
+ USB_DBG("dev %p is enumerated\r\n", dev);
} while(0);
@@ -1016,7 +1053,8 @@
return generalTransfer(dev, ep, buf, len, blocking, INTERRUPT_ENDPOINT, false);
}
-USB_TYPE USBHost::generalTransfer(USBDeviceConnected * dev, USBEndpoint * ep, uint8_t * buf, uint32_t len, bool blocking, ENDPOINT_TYPE type, bool write) {
+USB_TYPE USBHost::generalTransfer(USBDeviceConnected * dev, USBEndpoint * ep, uint8_t * buf, uint32_t len, bool blocking, ENDPOINT_TYPE type, bool write)
+{
#if DEBUG_TRANSFER
const char * type_str = (type == BULK_ENDPOINT) ? "BULK" : ((type == INTERRUPT_ENDPOINT) ? "INTERRUPT" : "ISOCHRONOUS");
@@ -1064,8 +1102,20 @@
res = addTransfer(ep, buf, len);
if ((blocking)&& (res == USB_TYPE_PROCESSING)) {
-
+#ifdef USBHOST_OTHER
+ osEvent event = ep->ep_queue.get(TD_TIMEOUT);
+ if (event.status == osEventTimeout)
+ {
+ /* control endpoint is confusing for merge on b */
+ disableList(CONTROL_ENDPOINT);
+ ep->setState(USB_TYPE_ERROR);
+ ep->ep_queue.get(0);
+ ep->unqueueTransfer(ep->getProcessedTD());
+ enableList(CONTROL_ENDPOINT);
+ }
+#else
ep->ep_queue.get();
+#endif
res = ep->getState();
USB_DBG_TRANSFER("%s TRANSFER res: %s on ep: %p\r\n", type_str, ep->getStateString(), ep);
@@ -1082,11 +1132,13 @@
}
-USB_TYPE USBHost::controlRead(USBDeviceConnected * dev, uint8_t requestType, uint8_t request, uint32_t value, uint32_t index, uint8_t * buf, uint32_t len) {
+USB_TYPE USBHost::controlRead(USBDeviceConnected * dev, uint8_t requestType, uint8_t request, uint32_t value, uint32_t index, uint8_t * buf, uint32_t len)
+{
return controlTransfer(dev, requestType, request, value, index, buf, len, false);
}
-USB_TYPE USBHost::controlWrite(USBDeviceConnected * dev, uint8_t requestType, uint8_t request, uint32_t value, uint32_t index, uint8_t * buf, uint32_t len) {
+USB_TYPE USBHost::controlWrite(USBDeviceConnected * dev, uint8_t requestType, uint8_t request, uint32_t value, uint32_t index, uint8_t * buf, uint32_t len)
+{
return controlTransfer(dev, requestType, request, value, index, buf, len, true);
}
@@ -1120,7 +1172,20 @@
control->setNextToken(TD_SETUP);
res = addTransfer(control, (uint8_t*)setupPacket, 8);
- if (res == USB_TYPE_PROCESSING) control->ep_queue.get();
+ if (res == USB_TYPE_PROCESSING)
+#ifdef USBHOST_OTHER
+ { osEvent event = control->ep_queue.get(TD_TIMEOUT_CTRL);
+ if (event.status == osEventTimeout) {
+ disableList(CONTROL_ENDPOINT);
+ control->setState(USB_TYPE_ERROR);
+ control->ep_queue.get(0);
+ control->unqueueTransfer(control->getProcessedTD());
+ enableList(CONTROL_ENDPOINT);
+ }
+ }
+#else
+ control->ep_queue.get();
+#endif
res = control->getState();
USB_DBG_TRANSFER("CONTROL setup stage %s", control->getStateString());
@@ -1134,7 +1199,21 @@
control->setNextToken(token);
res = addTransfer(control, (uint8_t *)buf, length_transfer);
- if (res == USB_TYPE_PROCESSING) control->ep_queue.get();
+ if (res == USB_TYPE_PROCESSING)
+#ifdef USBHOST_OTHER
+ { osEvent event = control->ep_queue.get(TD_TIMEOUT_CTRL);
+ if (event.status == osEventTimeout)
+ {
+ disableList(CONTROL_ENDPOINT);
+ control->setState(USB_TYPE_ERROR);
+ control->ep_queue.get(0);
+ control->unqueueTransfer(control->getProcessedTD());
+ enableList(CONTROL_ENDPOINT);
+ }
+ }
+#else
+ control->ep_queue.get();
+#endif
res = control->getState();
#if DEBUG_TRANSFER
@@ -1160,8 +1239,22 @@
token = (write) ? TD_IN : TD_OUT;
control->setNextToken(token);
res = addTransfer(control, NULL, 0);
-
- if (res == USB_TYPE_PROCESSING) control->ep_queue.get();
+ if (res == USB_TYPE_PROCESSING)
+#ifdef USBHOST_OTHER
+ {
+ osEvent event = control->ep_queue.get(TD_TIMEOUT_CTRL);
+ if (event.status == osEventTimeout)
+ {
+ disableList(CONTROL_ENDPOINT);
+ control->setState(USB_TYPE_ERROR);
+ control->ep_queue.get(0);
+ control->unqueueTransfer(control->getProcessedTD());
+ enableList(CONTROL_ENDPOINT);
+ }
+ }
+#else
+ control->ep_queue.get();
+#endif
res = control->getState();
USB_DBG_TRANSFER("CONTROL ack stage %s", control->getStateString());