Diff: USBHost/USBHALHost_RZ_A1.cpp

Revision:

8:3e7a33f81048

Parent:

7:7ebd364a6be5

--- a/USBHost/USBHALHost_RZ_A1.cpp	Mon Apr 30 05:37:24 2018 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,282 +0,0 @@
-/* mbed USBHost Library
- * Copyright (c) 2006-2013 ARM Limited
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- *     http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-
-#if defined(TARGET_RZ_A1H) || defined(TARGET_VK_RZ_A1H)
-
-#include "mbed.h"
-#include "USBHALHost.h"
-#include "dbg.h"
-
-#include "ohci_wrapp_RZ_A1.h"
-
-
-#define HCCA_SIZE sizeof(HCCA)
-#define ED_SIZE sizeof(HCED)
-#define TD_SIZE sizeof(HCTD)
-
-#define TOTAL_SIZE (HCCA_SIZE + (MAX_ENDPOINT*ED_SIZE) + (MAX_TD*TD_SIZE))
-#define ALIGNE_MSK (0x0000000F)
-
-static volatile uint8_t usb_buf[TOTAL_SIZE + ALIGNE_MSK];  //16 bytes aligned!
-
-USBHALHost * USBHALHost::instHost;
-
-USBHALHost::USBHALHost() {
-    instHost = this;
-    memInit();
-    memset((void*)usb_hcca, 0, HCCA_SIZE);
-    for (int i = 0; i < MAX_ENDPOINT; i++) {
-        edBufAlloc[i] = false;
-    }
-    for (int i = 0; i < MAX_TD; i++) {
-        tdBufAlloc[i] = false;
-    }
-}
-
-void USBHALHost::init() {
-    ohciwrapp_init(&_usbisr);
-
-    ohciwrapp_reg_w(OHCI_REG_CONTROL, 1);       // HARDWARE RESET
-    ohciwrapp_reg_w(OHCI_REG_CONTROLHEADED, 0); // Initialize Control list head to Zero
-    ohciwrapp_reg_w(OHCI_REG_BULKHEADED, 0);    // Initialize Bulk list head to Zero
-
-    // Wait 100 ms before apply reset
-    wait_ms(100);
-
-    // software reset
-    ohciwrapp_reg_w(OHCI_REG_COMMANDSTATUS, OR_CMD_STATUS_HCR);
-
-    // Write Fm Interval and Largest Data Packet Counter
-    ohciwrapp_reg_w(OHCI_REG_FMINTERVAL, DEFAULT_FMINTERVAL);
-    ohciwrapp_reg_w(OHCI_REG_PERIODICSTART,  FI * 90 / 100);
-
-    // Put HC in operational state
-    ohciwrapp_reg_w(OHCI_REG_CONTROL, (ohciwrapp_reg_r(OHCI_REG_CONTROL) & (~OR_CONTROL_HCFS)) | OR_CONTROL_HC_OPER);
-    // Set Global Power
-    ohciwrapp_reg_w(OHCI_REG_RHSTATUS, OR_RH_STATUS_LPSC);
-
-    ohciwrapp_reg_w(OHCI_REG_HCCA, (uint32_t)(usb_hcca));
-
-    // Clear Interrrupt Status
-    ohciwrapp_reg_w(OHCI_REG_INTERRUPTSTATUS, ohciwrapp_reg_r(OHCI_REG_INTERRUPTSTATUS));
-
-    ohciwrapp_reg_w(OHCI_REG_INTERRUPTENABLE, OR_INTR_ENABLE_MIE | OR_INTR_ENABLE_WDH | OR_INTR_ENABLE_RHSC);
-
-    // Enable the USB Interrupt
-    ohciwrapp_reg_w(OHCI_REG_RHPORTSTATUS1, OR_RH_PORT_CSC);
-    ohciwrapp_reg_w(OHCI_REG_RHPORTSTATUS1, OR_RH_PORT_PRSC);
-
-    // Check for any connected devices
-    if (ohciwrapp_reg_r(OHCI_REG_RHPORTSTATUS1) & OR_RH_PORT_CCS) {
-        //Device connected
-        wait_ms(150);
-        USB_DBG("Device connected (%08x)\n\r", ohciwrapp_reg_r(OHCI_REG_RHPORTSTATUS1));
-        deviceConnected(0, 1, ohciwrapp_reg_r(OHCI_REG_RHPORTSTATUS1) & OR_RH_PORT_LSDA);
-    }
-}
-
-uint32_t USBHALHost::controlHeadED() {
-    return ohciwrapp_reg_r(OHCI_REG_CONTROLHEADED);
-}
-
-uint32_t USBHALHost::bulkHeadED() {
-    return ohciwrapp_reg_r(OHCI_REG_BULKHEADED);
-}
-
-uint32_t USBHALHost::interruptHeadED() {
-    return usb_hcca->IntTable[0];
-}
-
-void USBHALHost::updateBulkHeadED(uint32_t addr) {
-    ohciwrapp_reg_w(OHCI_REG_BULKHEADED, addr);
-}
-
-
-void USBHALHost::updateControlHeadED(uint32_t addr) {
-    ohciwrapp_reg_w(OHCI_REG_CONTROLHEADED, addr);
-}
-
-void USBHALHost::updateInterruptHeadED(uint32_t addr) {
-    usb_hcca->IntTable[0] = addr;
-}
-
-
-void USBHALHost::enableList(ENDPOINT_TYPE type) {
-    uint32_t wk_data;
-
-    switch(type) {
-        case CONTROL_ENDPOINT:
-            ohciwrapp_reg_w(OHCI_REG_COMMANDSTATUS, OR_CMD_STATUS_CLF);
-            wk_data = (ohciwrapp_reg_r(OHCI_REG_CONTROL) | OR_CONTROL_CLE);
-            ohciwrapp_reg_w(OHCI_REG_CONTROL, wk_data);
-            break;
-        case ISOCHRONOUS_ENDPOINT:
-            break;
-        case BULK_ENDPOINT:
-            ohciwrapp_reg_w(OHCI_REG_COMMANDSTATUS, OR_CMD_STATUS_BLF);
-            wk_data = (ohciwrapp_reg_r(OHCI_REG_CONTROL) | OR_CONTROL_BLE);
-            ohciwrapp_reg_w(OHCI_REG_CONTROL, wk_data);
-            break;
-        case INTERRUPT_ENDPOINT:
-            wk_data = (ohciwrapp_reg_r(OHCI_REG_CONTROL) | OR_CONTROL_PLE);
-            ohciwrapp_reg_w(OHCI_REG_CONTROL, wk_data);
-            break;
-    }
-}
-
-
-bool USBHALHost::disableList(ENDPOINT_TYPE type) {
-    uint32_t wk_data;
-
-    switch(type) {
-        case CONTROL_ENDPOINT:
-            wk_data = ohciwrapp_reg_r(OHCI_REG_CONTROL);
-            if(wk_data & OR_CONTROL_CLE) {
-                wk_data &= ~OR_CONTROL_CLE;
-                ohciwrapp_reg_w(OHCI_REG_CONTROL, wk_data);
-                return true;
-            }
-            return false;
-        case ISOCHRONOUS_ENDPOINT:
-            return false;
-        case BULK_ENDPOINT:
-            wk_data = ohciwrapp_reg_r(OHCI_REG_CONTROL);
-            if(wk_data & OR_CONTROL_BLE) {
-                wk_data &= ~OR_CONTROL_BLE;
-                ohciwrapp_reg_w(OHCI_REG_CONTROL, wk_data);
-                return true;
-            }
-            return false;
-        case INTERRUPT_ENDPOINT:
-            wk_data = ohciwrapp_reg_r(OHCI_REG_CONTROL);
-            if(wk_data & OR_CONTROL_PLE) {
-                wk_data &= ~OR_CONTROL_PLE;
-                ohciwrapp_reg_w(OHCI_REG_CONTROL, wk_data);
-                return true;
-            }
-            return false;
-    }
-    return false;
-}
-
-
-void USBHALHost::memInit() {
-    volatile uint8_t *p_wk_buf = (uint8_t *)(((uint32_t)usb_buf + ALIGNE_MSK) & ~ALIGNE_MSK);
-
-    usb_hcca = (volatile HCCA *)p_wk_buf;
-    usb_edBuf = (volatile uint8_t *)(p_wk_buf + HCCA_SIZE);
-    usb_tdBuf = (volatile uint8_t *)(p_wk_buf + HCCA_SIZE + (MAX_ENDPOINT*ED_SIZE));
-}
-
-volatile uint8_t * USBHALHost::getED() {
-    for (int i = 0; i < MAX_ENDPOINT; i++) {
-        if ( !edBufAlloc[i] ) {
-            edBufAlloc[i] = true;
-            return (volatile uint8_t *)(usb_edBuf + i*ED_SIZE);
-        }
-    }
-    perror("Could not allocate ED\r\n");
-    return NULL; //Could not alloc ED
-}
-
-volatile uint8_t * USBHALHost::getTD() {
-    int i;
-    for (i = 0; i < MAX_TD; i++) {
-        if ( !tdBufAlloc[i] ) {
-            tdBufAlloc[i] = true;
-            return (volatile uint8_t *)(usb_tdBuf + i*TD_SIZE);
-        }
-    }
-    perror("Could not allocate TD\r\n");
-    return NULL; //Could not alloc TD
-}
-
-
-void USBHALHost::freeED(volatile uint8_t * ed) {
-    int i;
-    i = (ed - usb_edBuf) / ED_SIZE;
-    edBufAlloc[i] = false;
-}
-
-void USBHALHost::freeTD(volatile uint8_t * td) {
-    int i;
-    i = (td - usb_tdBuf) / TD_SIZE;
-    tdBufAlloc[i] = false;
-}
-
-
-void USBHALHost::resetRootHub() {
-    // Initiate port reset
-    ohciwrapp_reg_w(OHCI_REG_RHPORTSTATUS1, OR_RH_PORT_PRS);
-
-    while (ohciwrapp_reg_r(OHCI_REG_RHPORTSTATUS1) & OR_RH_PORT_PRS);
-
-    // ...and clear port reset signal
-    ohciwrapp_reg_w(OHCI_REG_RHPORTSTATUS1, OR_RH_PORT_PRSC);
-}
-
-
-void USBHALHost::_usbisr(void) {
-    if (instHost) {
-        instHost->UsbIrqhandler();
-    }
-}
-
-void USBHALHost::UsbIrqhandler() {
-    uint32_t int_status = ohciwrapp_reg_r(OHCI_REG_INTERRUPTSTATUS) & ohciwrapp_reg_r(OHCI_REG_INTERRUPTENABLE);
-    uint32_t data;
-
-    if (int_status != 0) { //Is there something to actually process?
-        // Root hub status change interrupt
-        if (int_status & OR_INTR_STATUS_RHSC) {
-            if (ohciwrapp_reg_r(OHCI_REG_RHPORTSTATUS1) & OR_RH_PORT_CSC) {
-                if (ohciwrapp_reg_r(OHCI_REG_RHSTATUS) & OR_RH_STATUS_DRWE) {
-                    // When DRWE is on, Connect Status Change
-                    // means a remote wakeup event.
-                } else {
-
-                    //Root device connected
-                    if (ohciwrapp_reg_r(OHCI_REG_RHPORTSTATUS1) & OR_RH_PORT_CCS) {
-
-                        // wait 150ms to avoid bounce
-                        wait_ms(150);
-
-                        //Hub 0 (root hub), Port 1 (count starts at 1), Low or High speed
-                        data = ohciwrapp_reg_r(OHCI_REG_RHPORTSTATUS1) & OR_RH_PORT_LSDA;
-                        deviceConnected(0, 1, data);
-                    }
-
-                    //Root device disconnected
-                    else {
-                        deviceDisconnected(0, 1, NULL, usb_hcca->DoneHead & 0xFFFFFFFE);
-                    }
-                }
-                ohciwrapp_reg_w(OHCI_REG_RHPORTSTATUS1, OR_RH_PORT_CSC);
-            }
-            if (ohciwrapp_reg_r(OHCI_REG_RHPORTSTATUS1) & OR_RH_PORT_PRSC) {
-                ohciwrapp_reg_w(OHCI_REG_RHPORTSTATUS1, OR_RH_PORT_PRSC);
-            }
-            ohciwrapp_reg_w(OHCI_REG_INTERRUPTSTATUS, OR_INTR_STATUS_RHSC);
-        }
-
-        // Writeback Done Head interrupt
-        if (int_status & OR_INTR_STATUS_WDH) {
-            transferCompleted(usb_hcca->DoneHead & 0xFFFFFFFE);
-            ohciwrapp_reg_w(OHCI_REG_INTERRUPTSTATUS, OR_INTR_STATUS_WDH);
-        }
-    }
-}
-#endif