Diff: USBHost/TARGET_STM/USBHALHost_DISCOL476VG.h

Revision:

8:3e7a33f81048

Parent:

7:7ebd364a6be5

--- a/USBHost/TARGET_STM/USBHALHost_DISCOL476VG.h	Mon Apr 30 05:37:24 2018 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,118 +0,0 @@
-/* Copyright (c) 2016 mbed.org, MIT License
-*
-* Permission is hereby granted, free of charge, to any person obtaining a copy of this software
-* and associated documentation files (the "Software"), to deal in the Software without
-* restriction, including without limitation the rights to use, copy, modify, merge, publish,
-* distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the
-* Software is furnished to do so, subject to the following conditions:
-*
-* The above copyright notice and this permission notice shall be included in all copies or
-* substantial portions of the Software.
-*
-* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING
-* BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
-* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
-* DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
-* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
-*/
-#ifndef USBHALHOST_DISCOL476VG
-#define USBHALHOST_DISCOL476VG
-
-#define USBHAL_IRQn  OTG_FS_IRQn
-
-#define HCCA_SIZE sizeof(HCD_HandleTypeDef)
-#define ED_SIZE  sizeof(HCED)
-#define TD_SIZE  sizeof(HCTD)
-
-#define TOTAL_SIZE (HCCA_SIZE + (MAX_ENDPOINT*ED_SIZE) + (MAX_TD*TD_SIZE))
-/* STM device FS have 11 channels  (definition is for 60 channels) */
-static volatile  uint8_t usb_buf[TOTAL_SIZE];
-typedef struct
-{
-    /* store the request ongoing on each endpoit  */
-    /*  1st field of structure avoid  giving knowledge of all structure to
-     *  endpoint */
-    volatile uint32_t addr[MAX_ENDPOINT];
-    USBHALHost *inst;
-    void (USBHALHost::*deviceConnected)(int hub, int port, bool lowSpeed, USBHostHub * hub_parent);
-    void (USBHALHost::*deviceDisconnected)(int hub, int port, USBHostHub * hub_parent, volatile uint32_t addr);
-    void (USBHALHost::*transferCompleted)(volatile uint32_t addr);
-}USBHALHost_Private_t;
-
-static gpio_t gpio_vbus;
-
-#define  VBUS_OFF 1
-#define  VBUS_ON 0
-#define USB_VBUS_CONFIG \
-    do {\
-		gpio_init_out_ex(&gpio_vbus, PC_9, VBUS_OFF);\
-	}while(0);
-
-
-void  usb_vbus( uint8_t state)
-{
-    if(state == 0)
-    {
-        gpio_write(&gpio_vbus, VBUS_OFF);
-    }
-    else
-    {
-        gpio_write(&gpio_vbus, VBUS_ON);
-    }
-    wait(0.2);
-}
-
-
-USBHALHost::USBHALHost() {
-    instHost = this;
-    HCD_HandleTypeDef *hhcd;
-    USBHALHost_Private_t *HALPriv = new(USBHALHost_Private_t);
-    memset(HALPriv, 0, sizeof(USBHALHost_Private_t));
-    memInit();
-    memset((void*)usb_hcca, 0, HCCA_SIZE);
-    hhcd = (HCD_HandleTypeDef *)usb_hcca;
-    hhcd->Instance = USB_OTG_FS;
-    hhcd->pData = (void*)HALPriv;
-    hhcd->Init.Host_channels = 11;
-    /*   for now failed with dma */
-    hhcd->Init.dma_enable = 0;
-    hhcd->Init.speed =  HCD_SPEED_FULL;
-    hhcd->Init.phy_itface = HCD_PHY_EMBEDDED;
-    hhcd->Init.use_external_vbus = 1;
-    HALPriv->inst = this;
-    HALPriv->deviceConnected = &USBHALHost::deviceConnected;
-    HALPriv->deviceDisconnected = &USBHALHost::deviceDisconnected;
-    HALPriv->transferCompleted = &USBHALHost::transferCompleted;
-    for (int i = 0; i < MAX_ENDPOINT; i++) {
-        edBufAlloc[i] = false;
-        HALPriv->addr[i]=(uint32_t)-1;
-    }
-    for (int i = 0; i < MAX_TD; i++) {
-        tdBufAlloc[i] = false;
-    }
-    __HAL_RCC_PWR_CLK_ENABLE();
-#ifdef TARGET_STM32L4
-    HAL_PWREx_EnableVddUSB();
-#endif
-
-    /* Configure USB HS GPIOs */
-    __HAL_RCC_GPIOA_CLK_ENABLE();
-
-    /*USB DM and DP */
-    pin_function(PA_11, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF10_OTG_FS));
-    pin_function(PA_12, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF10_OTG_FS));
-
-    /* Configure  VBUS Pin */
-    __HAL_RCC_GPIOC_CLK_ENABLE();
-    pin_function(PC_11, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF10_OTG_FS));
-    /* Configure POWER_SWITCH IO pin */
-    USB_VBUS_CONFIG;
-    __HAL_RCC_SYSCFG_CLK_ENABLE();
-
-    /* Enable USB FS Clocks */
-    __HAL_RCC_USB_OTG_FS_CLK_ENABLE();
-    /* Set USBFS Interrupt priority */
-    HAL_NVIC_SetPriority(USBHAL_IRQn, 5, 0);
-    NVIC_SetVector(USBHAL_IRQn, (uint32_t)&_usbisr);
-}
-#endif