Kenji Arai / Nucleo_rtos_sample

This is sample program for Nucleo L152RE (and F401RE & F411RE) mbed-rtos. You need to modify mbed-src and mbed-rtos before compile it.

Dependencies:   mbed-rtos mbed-src SetRTC

Fork of GR-PEACH_test_on_rtos_works_well by Kenji Arai

Please refer below link.
/users/kenjiArai/notebook/necleo-l152re-rtos-sample-also-for-f401re--f411re-/

debug_tools_L152_F4x1RE/mon_hw_STM32.h@10:1c0f58b9c048, 2015-05-16 (annotated)

Committer:
kenjiArai
Date:
Sat May 16 00:43:39 2015 +0000
Revision:
10:1c0f58b9c048
Sample program for mbed-src usage sample. You need to modify both mbed-rtos and mbed-src before compile it.

Who changed what in which revision?

UserRevisionLine numberNew contents of line
kenjiArai 10:1c0f58b9c048 1 /*
kenjiArai 10:1c0f58b9c048 2 * mbed Application program for the ST NUCLEO Board
kenjiArai 10:1c0f58b9c048 3 *
kenjiArai 10:1c0f58b9c048 4 * Copyright (c) 2010-2015 Kenji Arai / JH1PJL
kenjiArai 10:1c0f58b9c048 5 * http://www.page.sannet.ne.jp/kenjia/index.html
kenjiArai 10:1c0f58b9c048 6 * http://mbed.org/users/kenjiArai/
kenjiArai 10:1c0f58b9c048 7 * Created: July 7th, 2014
kenjiArai 10:1c0f58b9c048 8 * Revised: May 16th, 2015
kenjiArai 10:1c0f58b9c048 9 *
kenjiArai 10:1c0f58b9c048 10 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED,
kenjiArai 10:1c0f58b9c048 11 * INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE
kenjiArai 10:1c0f58b9c048 12 * AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
kenjiArai 10:1c0f58b9c048 13 * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
kenjiArai 10:1c0f58b9c048 14 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
kenjiArai 10:1c0f58b9c048 15 */
kenjiArai 10:1c0f58b9c048 16
kenjiArai 10:1c0f58b9c048 17 // ROM / Constant data ---------------------------------------------------------------------------
kenjiArai 10:1c0f58b9c048 18 char *const rgmsg0 = " 7, 6, 5, 4, 3, 2, 1, 0";
kenjiArai 10:1c0f58b9c048 19 char *const rgmsg1 = "15,14,13,12,11,10, 9, 8,";
kenjiArai 10:1c0f58b9c048 20
kenjiArai 10:1c0f58b9c048 21 char *const cmsg0 = "Use MSI(internal RC)";
kenjiArai 10:1c0f58b9c048 22 char *const cmsg1 = "freq=";
kenjiArai 10:1c0f58b9c048 23 char *const cmsg2 = "Use HSI(internal RC/High speed)";
kenjiArai 10:1c0f58b9c048 24 char *const cmsg3 = "Use HSE(External Xtal)";
kenjiArai 10:1c0f58b9c048 25 char *const cmsg4 = "Use PLL with";
kenjiArai 10:1c0f58b9c048 26 char *const cmsg5 = "??? following infromation is not valid !";
kenjiArai 10:1c0f58b9c048 27 char *const cmsg6 = "clock freq. =";
kenjiArai 10:1c0f58b9c048 28 char *const cmsg7 = "No clock";
kenjiArai 10:1c0f58b9c048 29 char *const cmsg8 = "Use LSE(external Xtal)=32768Hz";
kenjiArai 10:1c0f58b9c048 30 char *const cmsg9 = "Use LSI(internal RC/Low speed), RC=";
kenjiArai 10:1c0f58b9c048 31 char *const cmsg10= "Use HSE(external Xtal & prescaler)";
kenjiArai 10:1c0f58b9c048 32 char *const cmsg11= "Power Control";
kenjiArai 10:1c0f58b9c048 33
kenjiArai 10:1c0f58b9c048 34 char *const imsg2 = "-->Control Reg.";
kenjiArai 10:1c0f58b9c048 35 char *const imsg3 = "-->Status Reg.";
kenjiArai 10:1c0f58b9c048 36 char *const imsg4 = "-->Data Reg.";
kenjiArai 10:1c0f58b9c048 37 char *const imsg5 = "-->Baud rate Reg.";
kenjiArai 10:1c0f58b9c048 38 char *const imsg6 = "-->Own address Reg.";
kenjiArai 10:1c0f58b9c048 39 char *const imsg7 = "-->Clock control Reg.";
kenjiArai 10:1c0f58b9c048 40 char *const imsg8 = "-->TRISE Reg.";
kenjiArai 10:1c0f58b9c048 41
kenjiArai 10:1c0f58b9c048 42 char *const rnmsg0 = " CR1--";
kenjiArai 10:1c0f58b9c048 43 char *const rnmsg1 = " CR2--";
kenjiArai 10:1c0f58b9c048 44 char *const rnmsg2 = " DR---";
kenjiArai 10:1c0f58b9c048 45 char *const rnmsg3 = " SR---";
kenjiArai 10:1c0f58b9c048 46 char *const rnmsg4 = " BRR--";
kenjiArai 10:1c0f58b9c048 47 char *const rnmsg5 = " SR1--";
kenjiArai 10:1c0f58b9c048 48 char *const rnmsg6 = " SR2--";
kenjiArai 10:1c0f58b9c048 49 char *const rnmsg7 = " OAR1-";
kenjiArai 10:1c0f58b9c048 50 char *const rnmsg8 = " OAR2-";
kenjiArai 10:1c0f58b9c048 51 char *const rnmsg9 = " CCR--";
kenjiArai 10:1c0f58b9c048 52 char *const rnmsg10 = " TRISE";
kenjiArai 10:1c0f58b9c048 53
kenjiArai 10:1c0f58b9c048 54 char *const pnmsg0 = "Port ";
kenjiArai 10:1c0f58b9c048 55 // 0x00000000 0x0000 0x00000000 0x00000000 0x0000 0x0000
kenjiArai 10:1c0f58b9c048 56 char *const pnmsg1 = "Mode Out-type Out-speed Pup/dwn Input Output";
kenjiArai 10:1c0f58b9c048 57 char *const pnmsga = "GPIOA";
kenjiArai 10:1c0f58b9c048 58 char *const pnmsgb = "GPIOB";
kenjiArai 10:1c0f58b9c048 59 char *const pnmsgc = "GPIOC";
kenjiArai 10:1c0f58b9c048 60 char *const pnmsgd = "GPIOD";
kenjiArai 10:1c0f58b9c048 61 char *const pnmsge = "GPIOE";
kenjiArai 10:1c0f58b9c048 62 char *const pnmsgh = "GPIOH";
kenjiArai 10:1c0f58b9c048 63 char *const pnmsg2 = "Select GPIO";
kenjiArai 10:1c0f58b9c048 64 char *const pnmsg3 = " All";
kenjiArai 10:1c0f58b9c048 65 char *const pnmsg4 = "-->Output";
kenjiArai 10:1c0f58b9c048 66 char *const pnmsg5 = "-->Input";
kenjiArai 10:1c0f58b9c048 67 char *const pnmsg6 = "data";
kenjiArai 10:1c0f58b9c048 68
kenjiArai 10:1c0f58b9c048 69 // Here is redefine part (ST Nucleo F401RE needs here definition)
kenjiArai 10:1c0f58b9c048 70 #ifndef GPIO_Mode_IN
kenjiArai 10:1c0f58b9c048 71 #define GPIO_Mode_IN 0
kenjiArai 10:1c0f58b9c048 72 #define GPIO_Mode_OUT 1
kenjiArai 10:1c0f58b9c048 73 #define GPIO_Mode_AF 2
kenjiArai 10:1c0f58b9c048 74 #define GPIO_Mode_AN 3
kenjiArai 10:1c0f58b9c048 75 #endif
kenjiArai 10:1c0f58b9c048 76
kenjiArai 10:1c0f58b9c048 77 #ifndef GPIO_Speed_400KHz
kenjiArai 10:1c0f58b9c048 78 #define GPIO_Speed_400KHz 0
kenjiArai 10:1c0f58b9c048 79 #define GPIO_Speed_2MHz 1
kenjiArai 10:1c0f58b9c048 80 #define GPIO_Speed_10MHz 2
kenjiArai 10:1c0f58b9c048 81 #define GPIO_Speed_40MHz 3
kenjiArai 10:1c0f58b9c048 82 #endif
kenjiArai 10:1c0f58b9c048 83
kenjiArai 10:1c0f58b9c048 84 #ifndef GPIO_PuPd_NOPULL
kenjiArai 10:1c0f58b9c048 85 #define GPIO_PuPd_NOPULL 0
kenjiArai 10:1c0f58b9c048 86 #define GPIO_PuPd_UP 1
kenjiArai 10:1c0f58b9c048 87 #define GPIO_PuPd_DOWN 2
kenjiArai 10:1c0f58b9c048 88 #endif