File content as of revision 8:7b033903c8fb:

/*
 * mbed Application program / Frequency Counter with GPS 1PPS Compensation
 *
 * Copyright (c) 2014 Kenji Arai / JH1PJL
 *  http://www.page.sannet.ne.jp/kenjia/index.html
 *  http://mbed.org/users/kenjiArai/
 *      Created: October   18th, 2014
 *      Revised: Nobember  23rd, 2014
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED,
 * INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE
 * AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
 * DAMAGES OR OTHER  LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
 */

#define USE_COM         // use Communication with PC(UART)

//  Include ---------------------------------------------------------------------------------------
#include "mbed.h"
#include "frq_cuntr_full.h"

using namespace Frequency_counter;

//  Definition ------------------------------------------------------------------------------------
#ifdef USE_COM
#define BAUD(x)         pc.baud(x)
#define GETC(x)         pc.getc(x)
#define PUTC(x)         pc.putc(x)
#define PRINTF(...)     pc.printf(__VA_ARGS__)
#define READABLE(x)     pc.readable(x)
#else
#define BAUD(x)         {;}
#define GETC(x)         {;}
#define PUTC(x)         {;}
#define PRINTF(...)     {;}
#define READABLE(x)     {;}
#endif

//  Object ----------------------------------------------------------------------------------------
//DigitalOut led_gate(LED1);
DigitalIn   sw_01(PC_0);
DigitalIn   sw_10(PC_1);
Serial      pc(USBTX, USBRX);
I2C         i2cBus(PB_9,PB_8);  // SDA, SCL
// PC_6,PC_7 & PB6 use for Timer3 & 4
// PA_0,PA_1 & PB_10 use for Timer2
FRQ_CUNTR   fc(PC_6, 1.0);      // Input port & gate time[sec]

//  RAM -------------------------------------------------------------------------------------------

//  ROM / Constant data ---------------------------------------------------------------------------

//  Function prototypes ---------------------------------------------------------------------------

//  Function prototypes ---------------------------------------------------------------------------

//-------------------------------------------------------------------------------------------------
//  Control Program
//-------------------------------------------------------------------------------------------------
int main()
{
    uint32_t counter_1pps = 0;
    uint32_t new_frequency = 0;

    BAUD(9600);
    // PA8 & PC9 uses for MCO_1 & MCO_2 -> Clock output for checking
    fc.port_mco1_mco2_set(2);      // Clk/2 ->1/1(100MHz) cannot measure!!
    wait(1.0);
    fc.read_frequency_TIM2(1.0);
    fc.read_frequency_TIM3P4(1.0);
    PRINTF("\r\nFrequency Counter by JH1PJL created on "__DATE__"\r\n");
    while(true) {
        while (fc.status_1pps() == 0) {
            ;
        }
        counter_1pps = fc.read_avarage_1pps();
        while (fc.status_freq_update() == 0) {
            ;
        }
        new_frequency = fc.read_freq_data();
        PRINTF("1PPS/ave = %9d , FREQUENCY = %9d\r\n", counter_1pps, new_frequency);
    }
}