cc y
/
mbed
Important changes to repositories hosted on mbed.com
Mbed hosted mercurial repositories are deprecated and are due to be permanently deleted in July 2026.
To keep a copy of this software download the repository Zip archive or clone locally using Mercurial.
It is also possible to export all your personal repositories from the account settings page.
Fork of
mbed
by 
mbed official
Diff: TARGET_NUCLEO_F401RE/stm32f4xx_hal_spi.h
- Revision:
- 122:f9eeca106725
- Parent:
- 110:165afa46840b
diff -r 6c34061e7c34 -r f9eeca106725 TARGET_NUCLEO_F401RE/stm32f4xx_hal_spi.h
--- a/TARGET_NUCLEO_F401RE/stm32f4xx_hal_spi.h Wed May 25 16:44:06 2016 +0100
+++ b/TARGET_NUCLEO_F401RE/stm32f4xx_hal_spi.h Thu Jul 07 14:34:11 2016 +0100
@@ -2,13 +2,13 @@
******************************************************************************
* @file stm32f4xx_hal_spi.h
* @author MCD Application Team
- * @version V1.4.1
- * @date 09-October-2015
+ * @version V1.5.0
+ * @date 06-May-2016
* @brief Header file of SPI HAL module.
******************************************************************************
* @attention
*
- * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
@@ -33,7 +33,7 @@
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
- */
+ */
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F4xx_HAL_SPI_H
@@ -44,7 +44,7 @@
#endif
/* Includes ------------------------------------------------------------------*/
-#include "stm32f4xx_hal_def.h"
+#include "stm32f4xx_hal_def.h"
/** @addtogroup STM32F4xx_HAL_Driver
* @{
@@ -58,20 +58,20 @@
/** @defgroup SPI_Exported_Types SPI Exported Types
* @{
*/
-
-/**
- * @brief SPI Configuration Structure definition
+
+/**
+ * @brief SPI Configuration Structure definition
*/
typedef struct
{
uint32_t Mode; /*!< Specifies the SPI operating mode.
- This parameter can be a value of @ref SPI_mode */
+ This parameter can be a value of @ref SPI_Mode */
- uint32_t Direction; /*!< Specifies the SPI Directional mode state.
- This parameter can be a value of @ref SPI_Direction_mode */
+ uint32_t Direction; /*!< Specifies the SPI bidirectional mode state.
+ This parameter can be a value of @ref SPI_Direction */
uint32_t DataSize; /*!< Specifies the SPI data size.
- This parameter can be a value of @ref SPI_data_size */
+ This parameter can be a value of @ref SPI_Data_Size */
uint32_t CLKPolarity; /*!< Specifies the serial clock steady state.
This parameter can be a value of @ref SPI_Clock_Polarity */
@@ -87,7 +87,7 @@
used to configure the transmit and receive SCK clock.
This parameter can be a value of @ref SPI_BaudRate_Prescaler
@note The communication clock is derived from the master
- clock. The slave clock does not need to be set */
+ clock. The slave clock does not need to be set. */
uint32_t FirstBit; /*!< Specifies whether data transfers start from MSB or LSB bit.
This parameter can be a value of @ref SPI_MSB_LSB_transmission */
@@ -100,7 +100,6 @@
uint32_t CRCPolynomial; /*!< Specifies the polynomial used for the CRC calculation.
This parameter must be a number between Min_Data = 0 and Max_Data = 65535 */
-
}SPI_InitTypeDef;
/**
@@ -108,17 +107,16 @@
*/
typedef enum
{
- HAL_SPI_STATE_RESET = 0x00, /*!< SPI not yet initialized or disabled */
- HAL_SPI_STATE_READY = 0x01, /*!< SPI initialized and ready for use */
- HAL_SPI_STATE_BUSY = 0x02, /*!< SPI process is ongoing */
- HAL_SPI_STATE_BUSY_TX = 0x12, /*!< Data Transmission process is ongoing */
- HAL_SPI_STATE_BUSY_RX = 0x22, /*!< Data Reception process is ongoing */
- HAL_SPI_STATE_BUSY_TX_RX = 0x32, /*!< Data Transmission and Reception process is ongoing */
- HAL_SPI_STATE_ERROR = 0x03 /*!< SPI error state */
-
+ HAL_SPI_STATE_RESET = 0x00U, /*!< Peripheral not Initialized */
+ HAL_SPI_STATE_READY = 0x01U, /*!< Peripheral Initialized and ready for use */
+ HAL_SPI_STATE_BUSY = 0x02U, /*!< an internal process is ongoing */
+ HAL_SPI_STATE_BUSY_TX = 0x03U, /*!< Data Transmission process is ongoing */
+ HAL_SPI_STATE_BUSY_RX = 0x04U, /*!< Data Reception process is ongoing */
+ HAL_SPI_STATE_BUSY_TX_RX = 0x05U, /*!< Data Transmission and Reception process is ongoing */
+ HAL_SPI_STATE_ERROR = 0x06U /*!< SPI error state */
}HAL_SPI_StateTypeDef;
-/**
+/**
* @brief SPI handle Structure definition
*/
typedef struct __SPI_HandleTypeDef
@@ -129,31 +127,32 @@
uint8_t *pTxBuffPtr; /* Pointer to SPI Tx transfer Buffer */
- uint16_t TxXferSize; /* SPI Tx transfer size */
-
- uint16_t TxXferCount; /* SPI Tx Transfer Counter */
+ uint16_t TxXferSize; /* SPI Tx Transfer size */
+
+ __IO uint16_t TxXferCount; /* SPI Tx Transfer Counter */
uint8_t *pRxBuffPtr; /* Pointer to SPI Rx transfer Buffer */
- uint16_t RxXferSize; /* SPI Rx transfer size */
-
- uint16_t RxXferCount; /* SPI Rx Transfer Counter */
+ uint16_t RxXferSize; /* SPI Rx Transfer size */
- DMA_HandleTypeDef *hdmatx; /* SPI Tx DMA handle parameters */
-
- DMA_HandleTypeDef *hdmarx; /* SPI Rx DMA handle parameters */
+ __IO uint16_t RxXferCount; /* SPI Rx Transfer Counter */
void (*RxISR)(struct __SPI_HandleTypeDef * hspi); /* function pointer on Rx ISR */
void (*TxISR)(struct __SPI_HandleTypeDef * hspi); /* function pointer on Tx ISR */
- HAL_LockTypeDef Lock; /* SPI locking object */
+ DMA_HandleTypeDef *hdmatx; /* SPI Tx DMA Handle parameters */
+
+ DMA_HandleTypeDef *hdmarx; /* SPI Rx DMA Handle parameters */
+
+ HAL_LockTypeDef Lock; /* Locking object */
__IO HAL_SPI_StateTypeDef State; /* SPI communication state */
__IO uint32_t ErrorCode; /* SPI Error code */
}SPI_HandleTypeDef;
+
/**
* @}
*/
@@ -164,52 +163,51 @@
*/
/** @defgroup SPI_Error_Code SPI Error Code
- * @brief SPI Error Code
* @{
- */
-#define HAL_SPI_ERROR_NONE ((uint32_t)0x00000000) /*!< No error */
-#define HAL_SPI_ERROR_MODF ((uint32_t)0x00000001) /*!< MODF error */
-#define HAL_SPI_ERROR_CRC ((uint32_t)0x00000002) /*!< CRC error */
-#define HAL_SPI_ERROR_OVR ((uint32_t)0x00000004) /*!< OVR error */
-#define HAL_SPI_ERROR_FRE ((uint32_t)0x00000008) /*!< FRE error */
-#define HAL_SPI_ERROR_DMA ((uint32_t)0x00000010) /*!< DMA transfer error */
-#define HAL_SPI_ERROR_FLAG ((uint32_t)0x00000020) /*!< Flag: RXNE,TXE, BSY */
+ */
+#define HAL_SPI_ERROR_NONE ((uint32_t)0x00000000U) /*!< No error */
+#define HAL_SPI_ERROR_MODF ((uint32_t)0x00000001U) /*!< MODF error */
+#define HAL_SPI_ERROR_CRC ((uint32_t)0x00000002U) /*!< CRC error */
+#define HAL_SPI_ERROR_OVR ((uint32_t)0x00000004U) /*!< OVR error */
+#define HAL_SPI_ERROR_FRE ((uint32_t)0x00000008U) /*!< FRE error */
+#define HAL_SPI_ERROR_DMA ((uint32_t)0x00000010U) /*!< DMA transfer error */
+#define HAL_SPI_ERROR_FLAG ((uint32_t)0x00000020U) /*!< Flag: RXNE,TXE, BSY */
/**
* @}
*/
-/** @defgroup SPI_mode SPI Mode
+/** @defgroup SPI_Mode SPI Mode
* @{
*/
-#define SPI_MODE_SLAVE ((uint32_t)0x00000000)
+#define SPI_MODE_SLAVE ((uint32_t)0x00000000U)
#define SPI_MODE_MASTER (SPI_CR1_MSTR | SPI_CR1_SSI)
/**
* @}
*/
-/** @defgroup SPI_Direction_mode SPI Direction Mode
+/** @defgroup SPI_Direction SPI Direction Mode
* @{
*/
-#define SPI_DIRECTION_2LINES ((uint32_t)0x00000000)
-#define SPI_DIRECTION_2LINES_RXONLY SPI_CR1_RXONLY
-#define SPI_DIRECTION_1LINE SPI_CR1_BIDIMODE
+#define SPI_DIRECTION_2LINES ((uint32_t)0x00000000U)
+#define SPI_DIRECTION_2LINES_RXONLY SPI_CR1_RXONLY
+#define SPI_DIRECTION_1LINE SPI_CR1_BIDIMODE
/**
* @}
*/
-/** @defgroup SPI_data_size SPI Data Size
+/** @defgroup SPI_Data_Size SPI Data Size
* @{
*/
-#define SPI_DATASIZE_8BIT ((uint32_t)0x00000000)
+#define SPI_DATASIZE_8BIT ((uint32_t)0x00000000U)
#define SPI_DATASIZE_16BIT SPI_CR1_DFF
/**
* @}
- */
+ */
-/** @defgroup SPI_Clock_Polarity SPI Clock Polarity
+/** @defgroup SPI_Clock_Polarity SPI Clock Polarity
* @{
*/
-#define SPI_POLARITY_LOW ((uint32_t)0x00000000)
+#define SPI_POLARITY_LOW ((uint32_t)0x00000000U)
#define SPI_POLARITY_HIGH SPI_CR1_CPOL
/**
* @}
@@ -218,7 +216,7 @@
/** @defgroup SPI_Clock_Phase SPI Clock Phase
* @{
*/
-#define SPI_PHASE_1EDGE ((uint32_t)0x00000000)
+#define SPI_PHASE_1EDGE ((uint32_t)0x00000000U)
#define SPI_PHASE_2EDGE SPI_CR1_CPHA
/**
* @}
@@ -228,31 +226,31 @@
* @{
*/
#define SPI_NSS_SOFT SPI_CR1_SSM
-#define SPI_NSS_HARD_INPUT ((uint32_t)0x00000000)
-#define SPI_NSS_HARD_OUTPUT ((uint32_t)0x00040000)
+#define SPI_NSS_HARD_INPUT ((uint32_t)0x00000000U)
+#define SPI_NSS_HARD_OUTPUT ((uint32_t)0x00040000U)
/**
* @}
- */
+ */
/** @defgroup SPI_BaudRate_Prescaler SPI BaudRate Prescaler
* @{
*/
-#define SPI_BAUDRATEPRESCALER_2 ((uint32_t)0x00000000)
-#define SPI_BAUDRATEPRESCALER_4 ((uint32_t)0x00000008)
-#define SPI_BAUDRATEPRESCALER_8 ((uint32_t)0x00000010)
-#define SPI_BAUDRATEPRESCALER_16 ((uint32_t)0x00000018)
-#define SPI_BAUDRATEPRESCALER_32 ((uint32_t)0x00000020)
-#define SPI_BAUDRATEPRESCALER_64 ((uint32_t)0x00000028)
-#define SPI_BAUDRATEPRESCALER_128 ((uint32_t)0x00000030)
-#define SPI_BAUDRATEPRESCALER_256 ((uint32_t)0x00000038)
+#define SPI_BAUDRATEPRESCALER_2 ((uint32_t)0x00000000U)
+#define SPI_BAUDRATEPRESCALER_4 ((uint32_t)0x00000008U)
+#define SPI_BAUDRATEPRESCALER_8 ((uint32_t)0x00000010U)
+#define SPI_BAUDRATEPRESCALER_16 ((uint32_t)0x00000018U)
+#define SPI_BAUDRATEPRESCALER_32 ((uint32_t)0x00000020U)
+#define SPI_BAUDRATEPRESCALER_64 ((uint32_t)0x00000028U)
+#define SPI_BAUDRATEPRESCALER_128 ((uint32_t)0x00000030U)
+#define SPI_BAUDRATEPRESCALER_256 ((uint32_t)0x00000038U)
/**
* @}
- */
+ */
-/** @defgroup SPI_MSB_LSB_transmission SPI MSB LSB Transsmission
+/** @defgroup SPI_MSB_LSB_transmission SPI MSB LSB Transmission
* @{
*/
-#define SPI_FIRSTBIT_MSB ((uint32_t)0x00000000)
+#define SPI_FIRSTBIT_MSB ((uint32_t)0x00000000U)
#define SPI_FIRSTBIT_LSB SPI_CR1_LSBFIRST
/**
* @}
@@ -261,7 +259,7 @@
/** @defgroup SPI_TI_mode SPI TI Mode
* @{
*/
-#define SPI_TIMODE_DISABLE ((uint32_t)0x00000000)
+#define SPI_TIMODE_DISABLE ((uint32_t)0x00000000U)
#define SPI_TIMODE_ENABLE SPI_CR2_FRF
/**
* @}
@@ -270,7 +268,7 @@
/** @defgroup SPI_CRC_Calculation SPI CRC Calculation
* @{
*/
-#define SPI_CRCCALCULATION_DISABLE ((uint32_t)0x00000000)
+#define SPI_CRCCALCULATION_DISABLE ((uint32_t)0x00000000U)
#define SPI_CRCCALCULATION_ENABLE SPI_CR1_CRCEN
/**
* @}
@@ -286,16 +284,16 @@
* @}
*/
-/** @defgroup SPI_Flags_definition SPI Flags Definition
+/** @defgroup SPI_Flags_definition SPI Flags Definition
* @{
*/
-#define SPI_FLAG_RXNE SPI_SR_RXNE
-#define SPI_FLAG_TXE SPI_SR_TXE
-#define SPI_FLAG_CRCERR SPI_SR_CRCERR
-#define SPI_FLAG_MODF SPI_SR_MODF
-#define SPI_FLAG_OVR SPI_SR_OVR
-#define SPI_FLAG_BSY SPI_SR_BSY
-#define SPI_FLAG_FRE SPI_SR_FRE
+#define SPI_FLAG_RXNE SPI_SR_RXNE /* SPI status flag: Rx buffer not empty flag */
+#define SPI_FLAG_TXE SPI_SR_TXE /* SPI status flag: Tx buffer empty flag */
+#define SPI_FLAG_BSY SPI_SR_BSY /* SPI status flag: Busy flag */
+#define SPI_FLAG_CRCERR SPI_SR_CRCERR /* SPI Error flag: CRC error flag */
+#define SPI_FLAG_MODF SPI_SR_MODF /* SPI Error flag: Mode fault flag */
+#define SPI_FLAG_OVR SPI_SR_OVR /* SPI Error flag: Overrun flag */
+#define SPI_FLAG_FRE SPI_SR_FRE /* SPI Error flag: TI mode frame format error flag */
/**
* @}
*/
@@ -308,15 +306,16 @@
/** @defgroup SPI_Exported_Macros SPI Exported Macros
* @{
*/
-/** @brief Reset SPI handle state
- * @param __HANDLE__: specifies the SPI handle.
+
+/** @brief Reset SPI handle state.
+ * @param __HANDLE__: specifies the SPI Handle.
* This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
* @retval None
*/
#define __HAL_SPI_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_SPI_STATE_RESET)
/** @brief Enable or disable the specified SPI interrupts.
- * @param __HANDLE__: specifies the SPI handle.
+ * @param __HANDLE__: specifies the SPI Handle.
* This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
* @param __INTERRUPT__: specifies the interrupt source to enable or disable.
* This parameter can be one of the following values:
@@ -328,8 +327,8 @@
#define __HAL_SPI_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR2 |= (__INTERRUPT__))
#define __HAL_SPI_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR2 &= (~(__INTERRUPT__)))
-/** @brief Check if the specified SPI interrupt source is enabled or disabled.
- * @param __HANDLE__: specifies the SPI handle.
+/** @brief Check whether the specified SPI interrupt source is enabled or not.
+ * @param __HANDLE__: specifies the SPI Handle.
* This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
* @param __INTERRUPT__: specifies the SPI interrupt source to check.
* This parameter can be one of the following values:
@@ -341,7 +340,7 @@
#define __HAL_SPI_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR2 & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
/** @brief Check whether the specified SPI flag is set or not.
- * @param __HANDLE__: specifies the SPI handle.
+ * @param __HANDLE__: specifies the SPI Handle.
* This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
* @param __FLAG__: specifies the flag to check.
* This parameter can be one of the following values:
@@ -351,71 +350,73 @@
* @arg SPI_FLAG_MODF: Mode fault flag
* @arg SPI_FLAG_OVR: Overrun flag
* @arg SPI_FLAG_BSY: Busy flag
- * @arg SPI_FLAG_FRE: Frame format error flag
+ * @arg SPI_FLAG_FRE: Frame format error flag
* @retval The new state of __FLAG__ (TRUE or FALSE).
*/
#define __HAL_SPI_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->SR) & (__FLAG__)) == (__FLAG__))
/** @brief Clear the SPI CRCERR pending flag.
- * @param __HANDLE__: specifies the SPI handle.
+ * @param __HANDLE__: specifies the SPI Handle.
+ * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+ * @retval None
+ */
+#define __HAL_SPI_CLEAR_CRCERRFLAG(__HANDLE__) ((__HANDLE__)->Instance->SR = (uint16_t)(~SPI_FLAG_CRCERR))
+
+/** @brief Clear the SPI MODF pending flag.
+ * @param __HANDLE__: specifies the SPI Handle.
+ * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+ * @retval None
+ */
+#define __HAL_SPI_CLEAR_MODFFLAG(__HANDLE__) \
+ do{ \
+ __IO uint32_t tmpreg_modf = 0x00U; \
+ tmpreg_modf = (__HANDLE__)->Instance->SR; \
+ (__HANDLE__)->Instance->CR1 &= (~SPI_CR1_SPE); \
+ UNUSED(tmpreg_modf); \
+ } while(0)
+
+/** @brief Clear the SPI OVR pending flag.
+ * @param __HANDLE__: specifies the SPI Handle.
* This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
* @retval None
*/
-#define __HAL_SPI_CLEAR_CRCERRFLAG(__HANDLE__) ((__HANDLE__)->Instance->SR = ~(SPI_FLAG_CRCERR))
+#define __HAL_SPI_CLEAR_OVRFLAG(__HANDLE__) \
+ do{ \
+ __IO uint32_t tmpreg_ovr = 0x00U; \
+ tmpreg_ovr = (__HANDLE__)->Instance->DR; \
+ tmpreg_ovr = (__HANDLE__)->Instance->SR; \
+ UNUSED(tmpreg_ovr); \
+ } while(0)
-/** @brief Clear the SPI MODF pending flag.
- * @param __HANDLE__: specifies the SPI handle.
- * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
- * @retval None
- */
-#define __HAL_SPI_CLEAR_MODFFLAG(__HANDLE__) \
- do{ \
- __IO uint32_t tmpreg; \
- tmpreg = (__HANDLE__)->Instance->SR; \
- (__HANDLE__)->Instance->CR1 &= (~SPI_CR1_SPE); \
- UNUSED(tmpreg); \
- } while(0)
-
-/** @brief Clear the SPI OVR pending flag.
- * @param __HANDLE__: specifies the SPI handle.
- * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+/** @brief Clear the SPI FRE pending flag.
+ * @param __HANDLE__: specifies the SPI Handle.
+ * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
* @retval None
*/
-#define __HAL_SPI_CLEAR_OVRFLAG(__HANDLE__) \
- do{ \
- __IO uint32_t tmpreg; \
- tmpreg = (__HANDLE__)->Instance->DR; \
- tmpreg = (__HANDLE__)->Instance->SR; \
- UNUSED(tmpreg); \
- } while(0)
+#define __HAL_SPI_CLEAR_FREFLAG(__HANDLE__) \
+ do{ \
+ __IO uint32_t tmpreg_fre = 0x00U; \
+ tmpreg_fre = (__HANDLE__)->Instance->SR; \
+ UNUSED(tmpreg_fre); \
+ }while(0)
-/** @brief Clear the SPI FRE pending flag.
- * @param __HANDLE__: specifies the SPI handle.
+/** @brief Enable the SPI peripheral.
+ * @param __HANDLE__: specifies the SPI Handle.
* This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
* @retval None
- */
-#define __HAL_SPI_CLEAR_FREFLAG(__HANDLE__) \
- do{ \
- __IO uint32_t tmpreg; \
- tmpreg = (__HANDLE__)->Instance->SR; \
- UNUSED(tmpreg); \
- }while(0)
-
-/** @brief Enable SPI
- * @param __HANDLE__: specifies the SPI Handle.
- * @retval None
*/
#define __HAL_SPI_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= SPI_CR1_SPE)
-/** @brief Disable SPI
- * @param __HANDLE__: specifies the SPI Handle.
+/** @brief Disable the SPI peripheral.
+ * @param __HANDLE__: specifies the SPI Handle.
+ * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
* @retval None
*/
-#define __HAL_SPI_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~SPI_CR1_SPE)
+#define __HAL_SPI_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= (~SPI_CR1_SPE))
/**
* @}
*/
-
+
/* Exported functions --------------------------------------------------------*/
/** @addtogroup SPI_Exported_Functions
* @{
@@ -454,62 +455,76 @@
void HAL_SPI_TxCpltCallback(SPI_HandleTypeDef *hspi);
void HAL_SPI_RxCpltCallback(SPI_HandleTypeDef *hspi);
void HAL_SPI_TxRxCpltCallback(SPI_HandleTypeDef *hspi);
-void HAL_SPI_ErrorCallback(SPI_HandleTypeDef *hspi);
void HAL_SPI_TxHalfCpltCallback(SPI_HandleTypeDef *hspi);
void HAL_SPI_RxHalfCpltCallback(SPI_HandleTypeDef *hspi);
void HAL_SPI_TxRxHalfCpltCallback(SPI_HandleTypeDef *hspi);
+void HAL_SPI_ErrorCallback(SPI_HandleTypeDef *hspi);
/**
* @}
*/
-
+
/** @addtogroup SPI_Exported_Functions_Group3
* @{
*/
-/* Peripheral State and Control functions **************************************/
+/* Peripheral State and Error functions ***************************************/
HAL_SPI_StateTypeDef HAL_SPI_GetState(SPI_HandleTypeDef *hspi);
-uint32_t HAL_SPI_GetError(SPI_HandleTypeDef *hspi);
-
+uint32_t HAL_SPI_GetError(SPI_HandleTypeDef *hspi);
/**
* @}
- */
+ */
/**
* @}
*/
-
+
/* Private types -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private constants ---------------------------------------------------------*/
-/** @defgroup SPI_Private_Constants SPI Private Constants
- * @{
- */
-/**
- * @}
- */
/* Private macros ------------------------------------------------------------*/
/** @defgroup SPI_Private_Macros SPI Private Macros
* @{
*/
+/** @brief Set the SPI transmit-only mode.
+ * @param __HANDLE__: specifies the SPI Handle.
+ * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+ * @retval None
+ */
+#define SPI_1LINE_TX(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= SPI_CR1_BIDIOE)
+
+/** @brief Set the SPI receive-only mode.
+ * @param __HANDLE__: specifies the SPI Handle.
+ * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+ * @retval None
+ */
+#define SPI_1LINE_RX(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= (~SPI_CR1_BIDIOE))
+
+/** @brief Reset the CRC calculation of the SPI.
+ * @param __HANDLE__: specifies the SPI Handle.
+ * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+ * @retval None
+ */
+#define SPI_RESET_CRC(__HANDLE__) do{(__HANDLE__)->Instance->CR1 &= (uint16_t)(~SPI_CR1_CRCEN);\
+ (__HANDLE__)->Instance->CR1 |= SPI_CR1_CRCEN;}while(0)
+
#define IS_SPI_MODE(MODE) (((MODE) == SPI_MODE_SLAVE) || \
((MODE) == SPI_MODE_MASTER))
-
-#define IS_SPI_DIRECTION_MODE(MODE) (((MODE) == SPI_DIRECTION_2LINES) || \
- ((MODE) == SPI_DIRECTION_2LINES_RXONLY) || \
- ((MODE) == SPI_DIRECTION_1LINE))
+#define IS_SPI_DIRECTION(MODE) (((MODE) == SPI_DIRECTION_2LINES) || \
+ ((MODE) == SPI_DIRECTION_2LINES_RXONLY) || \
+ ((MODE) == SPI_DIRECTION_1LINE))
+
+#define IS_SPI_DIRECTION_2LINES(MODE) ((MODE) == SPI_DIRECTION_2LINES)
#define IS_SPI_DIRECTION_2LINES_OR_1LINE(MODE) (((MODE) == SPI_DIRECTION_2LINES) || \
((MODE) == SPI_DIRECTION_1LINE))
-#define IS_SPI_DIRECTION_2LINES(MODE) ((MODE) == SPI_DIRECTION_2LINES)
-
#define IS_SPI_DATASIZE(DATASIZE) (((DATASIZE) == SPI_DATASIZE_16BIT) || \
((DATASIZE) == SPI_DATASIZE_8BIT))
#define IS_SPI_CPOL(CPOL) (((CPOL) == SPI_POLARITY_LOW) || \
- ((CPOL) == SPI_POLARITY_HIGH))
+ ((CPOL) == SPI_POLARITY_HIGH))
#define IS_SPI_CPHA(CPHA) (((CPHA) == SPI_PHASE_1EDGE) || \
((CPHA) == SPI_PHASE_2EDGE))
@@ -535,15 +550,9 @@
#define IS_SPI_CRC_CALCULATION(CALCULATION) (((CALCULATION) == SPI_CRCCALCULATION_DISABLE) || \
((CALCULATION) == SPI_CRCCALCULATION_ENABLE))
-
-#define IS_SPI_CRC_POLYNOMIAL(POLYNOMIAL) (((POLYNOMIAL) >= 0x1) && ((POLYNOMIAL) <= 0xFFFF))
-
-#define SPI_1LINE_TX(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= SPI_CR1_BIDIOE)
-#define SPI_1LINE_RX(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~SPI_CR1_BIDIOE)
+#define IS_SPI_CRC_POLYNOMIAL(POLYNOMIAL) (((POLYNOMIAL) >= 0x01U) && ((POLYNOMIAL) <= 0xFFFFU))
-#define SPI_RESET_CRC(__HANDLE__) do{(__HANDLE__)->Instance->CR1 &= (~SPI_CR1_CRCEN);\
- (__HANDLE__)->Instance->CR1 |= SPI_CR1_CRCEN;}while(0)
/**
* @}
*/
@@ -559,13 +568,12 @@
/**
* @}
- */
+ */
/**
* @}
*/
-
#ifdef __cplusplus
}
#endif