cc y
/
mbed
Important changes to repositories hosted on mbed.com
Mbed hosted mercurial repositories are deprecated and are due to be permanently deleted in July 2026.
To keep a copy of this software download the repository Zip archive or clone locally using Mercurial.
It is also possible to export all your personal repositories from the account settings page.
Fork of
mbed
by 
mbed official
Diff: TARGET_NUCLEO_F103RB/stm32f1xx_hal_rcc_ex.h
- Revision:
- 120:7c328cabac7e
- Parent:
- 96:487b796308b0
--- a/TARGET_NUCLEO_F103RB/stm32f1xx_hal_rcc_ex.h Wed Apr 27 12:10:56 2016 -0500
+++ b/TARGET_NUCLEO_F103RB/stm32f1xx_hal_rcc_ex.h Tue May 10 12:23:43 2016 -0500
@@ -2,13 +2,13 @@
******************************************************************************
* @file stm32f1xx_hal_rcc_ex.h
* @author MCD Application Team
- * @version V1.0.0
- * @date 15-December-2014
+ * @version V1.0.4
+ * @date 29-April-2016
* @brief Header file of RCC HAL Extension module.
******************************************************************************
* @attention
*
- * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
@@ -62,19 +62,18 @@
/* Alias word address of PLLI2SON bit */
#define PLLI2SON_BITNUMBER POSITION_VAL(RCC_CR_PLL3ON)
-#define RCC_CR_PLLI2SON_BB ((uint32_t)(PERIPH_BB_BASE + (RCC_CR_OFFSET_BB * 32) + (PLLI2SON_BITNUMBER * 4)))
+#define RCC_CR_PLLI2SON_BB ((uint32_t)(PERIPH_BB_BASE + (RCC_CR_OFFSET_BB * 32) + (PLLI2SON_BITNUMBER * 4)))
+/* Alias word address of PLL2ON bit */
+#define PLL2ON_BITNUMBER POSITION_VAL(RCC_CR_PLL2ON)
+#define RCC_CR_PLL2ON_BB ((uint32_t)(PERIPH_BB_BASE + (RCC_CR_OFFSET_BB * 32) + (PLL2ON_BITNUMBER * 4)))
-/** @defgroup RCCEx_PLL_Timeout PLL I2S Timeout
- * @{
- */
#define PLLI2S_TIMEOUT_VALUE ((uint32_t)100) /* 100 ms */
-/**
- * @}
- */
+#define PLL2_TIMEOUT_VALUE ((uint32_t)100) /* 100 ms */
#endif /* STM32F105xC || STM32F107xC */
-#define CR_REG_INDEX ((uint8_t)1)
+
+#define CR_REG_INDEX ((uint8_t)1)
/**
* @}
@@ -89,7 +88,8 @@
((__SOURCE__) == RCC_PREDIV1_SOURCE_PLL2))
#endif /* STM32F105xC || STM32F107xC */
-#if defined(STM32F105xC) || defined(STM32F107xC) || defined (STM32F100xB) || defined (STM32F100xE)
+#if defined(STM32F105xC) || defined(STM32F107xC) || defined(STM32F100xB)\
+ || defined(STM32F100xE)
#define IS_RCC_HSE_PREDIV(__DIV__) (((__DIV__) == RCC_HSE_PREDIV_DIV1) || ((__DIV__) == RCC_HSE_PREDIV_DIV2) || \
((__DIV__) == RCC_HSE_PREDIV_DIV3) || ((__DIV__) == RCC_HSE_PREDIV_DIV4) || \
((__DIV__) == RCC_HSE_PREDIV_DIV5) || ((__DIV__) == RCC_HSE_PREDIV_DIV6) || \
@@ -139,7 +139,7 @@
#define IS_RCC_I2S3CLKSOURCE(__SOURCE__) (((__SOURCE__) == RCC_I2S3CLKSOURCE_SYSCLK) || ((__SOURCE__) == RCC_I2S3CLKSOURCE_PLLI2S_VCO))
-#define IS_RCC_USBPLLCLK_DIV(__USBCLK__) (((__USBCLK__) == RCC_USBPLLCLK_DIV2) || ((__USBCLK__) == RCC_USBPLLCLK_DIV3))
+#define IS_RCC_USBPLLCLK_DIV(__USBCLK__) (((__USBCLK__) == RCC_USBCLKSOURCE_PLL_DIV2) || ((__USBCLK__) == RCC_USBCLKSOURCE_PLL_DIV3))
#define IS_RCC_PLLI2S_MUL(__MUL__) (((__MUL__) == RCC_PLLI2S_MUL8) || ((__MUL__) == RCC_PLLI2S_MUL9) || \
((__MUL__) == RCC_PLLI2S_MUL10) || ((__MUL__) == RCC_PLLI2S_MUL11) || \
@@ -186,7 +186,8 @@
(((__SELECTION__) & RCC_PERIPHCLK_USB) == RCC_PERIPHCLK_USB))
-#elif defined(STM32F102x6) || defined(STM32F102xB) || defined(STM32F103x6) || defined(STM32F103xB)
+#elif defined(STM32F102x6) || defined(STM32F102xB) || defined(STM32F103x6)\
+ || defined(STM32F103xB)
#define IS_RCC_PERIPHCLOCK(__SELECTION__) \
((((__SELECTION__) & RCC_PERIPHCLK_RTC) == RCC_PERIPHCLK_RTC) || \
@@ -201,9 +202,10 @@
#endif /* STM32F105xC || STM32F107xC */
-#if defined(STM32F102x6) || defined(STM32F102xB) || defined(STM32F103x6) || defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG)
+#if defined(STM32F102x6) || defined(STM32F102xB) || defined(STM32F103x6)\
+ || defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG)
-#define IS_RCC_USBPLLCLK_DIV(__USBCLK__) (((__USBCLK__) == RCC_USBPLLCLK_DIV1) || ((__USBCLK__) == RCC_USBPLLCLK_DIV1_5))
+#define IS_RCC_USBPLLCLK_DIV(__USBCLK__) (((__USBCLK__) == RCC_USBCLKSOURCE_PLL) || ((__USBCLK__) == RCC_USBCLKSOURCE_PLL_DIV1_5))
#endif /* STM32F102x6 || STM32F102xB || STM32F103x6 || STM32F103xB || STM32F103xE || STM32F103xG */
@@ -252,13 +254,13 @@
#endif /* STM32F105xC || STM32F107xC */
uint32_t HSEState; /*!< The new state of the HSE.
- This parameter can be a value of @ref __HAL_RCC_HSE_CONFIG */
+ This parameter can be a value of @ref RCC_HSE_Config */
uint32_t HSEPredivValue; /*!< The Prediv1 factor value (named PREDIV1 or PLLXTPRE in RM)
This parameter can be a value of @ref RCCEx_Prediv1_Factor */
uint32_t LSEState; /*!< The new state of the LSE.
- This parameter can be a value of @ref __HAL_RCC_LSE_CONFIG */
+ This parameter can be a value of @ref RCC_LSE_Config */
uint32_t HSIState; /*!< The new state of the HSI.
This parameter can be a value of @ref RCC_HSI_Config */
@@ -307,22 +309,24 @@
uint32_t AdcClockSelection; /*!< ADC clock source
This parameter can be a value of @ref RCCEx_ADC_Prescaler */
-#if defined (STM32F103xE) || defined (STM32F103xG) || defined (STM32F105xC) || defined (STM32F107xC)
+#if defined(STM32F103xE) || defined(STM32F103xG) || defined(STM32F105xC)\
+ || defined(STM32F107xC)
uint32_t I2s2ClockSelection; /*!< I2S2 clock source
This parameter can be a value of @ref RCCEx_I2S2_Clock_Source */
uint32_t I2s3ClockSelection; /*!< I2S3 clock source
This parameter can be a value of @ref RCCEx_I2S3_Clock_Source */
-#if defined (STM32F105xC) || defined (STM32F107xC)
+#if defined(STM32F105xC) || defined(STM32F107xC)
RCC_PLLI2SInitTypeDef PLLI2S; /*!< PLL I2S structure parameters
This parameter will be used only when PLLI2S is selected as Clock Source I2S2 or I2S3 */
#endif /* STM32F105xC || STM32F107xC */
#endif /* STM32F103xE || STM32F103xG || STM32F105xC || STM32F107xC */
-#if defined(STM32F102x6) || defined(STM32F102xB) || defined(STM32F103x6) || defined(STM32F103xB) || defined(STM32F103xE) || \
- defined(STM32F103xG) || defined(STM32F105xC) || defined(STM32F107xC)
+#if defined(STM32F102x6) || defined(STM32F102xB) || defined(STM32F103x6)\
+ || defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG)\
+ || defined(STM32F105xC) || defined(STM32F107xC)
uint32_t UsbClockSelection; /*!< USB clock source
This parameter can be a value of @ref RCCEx_USB_Prescaler */
@@ -344,12 +348,14 @@
*/
#define RCC_PERIPHCLK_RTC ((uint32_t)0x00000001)
#define RCC_PERIPHCLK_ADC ((uint32_t)0x00000002)
-#if defined (STM32F103xE) || defined (STM32F103xG) || defined (STM32F105xC) || defined (STM32F107xC)
+#if defined(STM32F103xE) || defined(STM32F103xG) || defined(STM32F105xC)\
+ || defined(STM32F107xC)
#define RCC_PERIPHCLK_I2S2 ((uint32_t)0x00000004)
#define RCC_PERIPHCLK_I2S3 ((uint32_t)0x00000008)
#endif /* STM32F103xE || STM32F103xG || STM32F105xC || STM32F107xC */
-#if defined(STM32F102x6) || defined(STM32F102xB) || defined(STM32F103x6) || defined(STM32F103xB) || defined(STM32F103xE) || \
- defined(STM32F103xG) || defined(STM32F105xC) || defined(STM32F107xC)
+#if defined(STM32F102x6) || defined(STM32F102xB) || defined(STM32F103x6)\
+ || defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG)\
+ || defined(STM32F105xC) || defined(STM32F107xC)
#define RCC_PERIPHCLK_USB ((uint32_t)0x00000010)
#endif /* STM32F102x6 || STM32F102xB || STM32F103x6 || STM32F103xB || STM32F103xE || STM32F103xG || STM32F105xC || STM32F107xC */
@@ -369,7 +375,8 @@
* @}
*/
-#if defined (STM32F103xE) || defined (STM32F103xG) || defined (STM32F105xC) || defined (STM32F107xC)
+#if defined(STM32F103xE) || defined(STM32F103xG) || defined(STM32F105xC)\
+ || defined(STM32F107xC)
/** @defgroup RCCEx_I2S2_Clock_Source I2S2 Clock Source
* @{
*/
@@ -396,13 +403,14 @@
#endif /* STM32F103xE || STM32F103xG || STM32F105xC || STM32F107xC */
-#if defined(STM32F102x6) || defined(STM32F102xB) || defined(STM32F103x6) || defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG)
+#if defined(STM32F102x6) || defined(STM32F102xB) || defined(STM32F103x6)\
+ || defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG)
/** @defgroup RCCEx_USB_Prescaler USB Prescaler
* @{
*/
-#define RCC_USBPLLCLK_DIV1 RCC_CFGR_USBPRE
-#define RCC_USBPLLCLK_DIV1_5 ((uint32_t)0x00000000)
+#define RCC_USBCLKSOURCE_PLL RCC_CFGR_USBPRE
+#define RCC_USBCLKSOURCE_PLL_DIV1_5 ((uint32_t)0x00000000)
/**
* @}
@@ -415,8 +423,8 @@
/** @defgroup RCCEx_USB_Prescaler USB Prescaler
* @{
*/
-#define RCC_USBPLLCLK_DIV2 RCC_CFGR_OTGFSPRE
-#define RCC_USBPLLCLK_DIV3 ((uint32_t)0x00000000)
+#define RCC_USBCLKSOURCE_PLL_DIV2 RCC_CFGR_OTGFSPRE
+#define RCC_USBCLKSOURCE_PLL_DIV3 ((uint32_t)0x00000000)
/**
* @}
@@ -460,7 +468,8 @@
#define RCC_HSE_PREDIV_DIV1 ((uint32_t)0x00000000)
-#if defined(STM32F105xC) || defined(STM32F107xC) || defined (STM32F100xB) || defined (STM32F100xE)
+#if defined(STM32F105xC) || defined(STM32F107xC) || defined(STM32F100xB)\
+ || defined(STM32F100xE)
#define RCC_HSE_PREDIV_DIV2 RCC_CFGR2_PREDIV1_DIV2
#define RCC_HSE_PREDIV_DIV3 RCC_CFGR2_PREDIV1_DIV3
#define RCC_HSE_PREDIV_DIV4 RCC_CFGR2_PREDIV1_DIV4
@@ -595,7 +604,7 @@
* @{
*/
#define RCC_IT_PLL2RDY ((uint8_t)RCC_CIR_PLL2RDYF)
-#define RCC_IT_PLLI2SRDY ((uint8_t)RCC_CIR_PLL3RDYF)
+#define RCC_IT_PLLI2SRDY ((uint8_t)RCC_CIR_PLL3RDYF)
/**
* @}
*/
@@ -632,8 +641,9 @@
* @{
*/
-#if defined (STM32F101xE) || defined (STM32F103xE) || defined(STM32F101xG) || defined(STM32F103xG) || \
- defined (STM32F105xC) || defined (STM32F107xC) || defined (STM32F100xE)
+#if defined(STM32F101xE) || defined(STM32F103xE) || defined(STM32F101xG)\
+ || defined(STM32F103xG) || defined(STM32F105xC) || defined (STM32F107xC)\
+ || defined (STM32F100xE)
#define __HAL_RCC_DMA2_CLK_ENABLE() do { \
__IO uint32_t tmpreg; \
SET_BIT(RCC->AHBENR, RCC_AHBENR_DMA2EN);\
@@ -645,7 +655,8 @@
#define __HAL_RCC_DMA2_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_DMA2EN))
#endif /* STM32F101xE || STM32F103xE || STM32F101xG || STM32F103xG || STM32F105xC || STM32F107xC || STM32F100xE */
-#if defined (STM32F101xE) || defined (STM32F103xE) || defined(STM32F101xG) || defined(STM32F103xG) || defined (STM32F100xE)
+#if defined(STM32F101xE) || defined(STM32F103xE) || defined(STM32F101xG)\
+ || defined(STM32F103xG) || defined (STM32F100xE)
#define __HAL_RCC_FSMC_CLK_ENABLE() do { \
__IO uint32_t tmpreg; \
SET_BIT(RCC->AHBENR, RCC_AHBENR_FSMCEN);\
@@ -657,7 +668,7 @@
#define __HAL_RCC_FSMC_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_FSMCEN))
#endif /* STM32F101xE || STM32F103xE || STM32F101xG || STM32F103xG || STM32F100xE */
-#if defined (STM32F103xE) || defined(STM32F103xG)
+#if defined(STM32F103xE) || defined(STM32F103xG)
#define __HAL_RCC_SDIO_CLK_ENABLE() do { \
__IO uint32_t tmpreg; \
SET_BIT(RCC->AHBENR, RCC_AHBENR_SDIOEN);\
@@ -743,16 +754,18 @@
* @{
*/
-#if defined (STM32F101xE) || defined (STM32F103xE) || defined(STM32F101xG) || defined(STM32F103xG) || \
- defined (STM32F105xC) || defined (STM32F107xC) || defined (STM32F100xE)
+#if defined(STM32F101xE) || defined(STM32F103xE) || defined(STM32F101xG)\
+ || defined(STM32F103xG) || defined(STM32F105xC) || defined (STM32F107xC)\
+ || defined (STM32F100xE)
#define __HAL_RCC_DMA2_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_DMA2EN)) != RESET)
#define __HAL_RCC_DMA2_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_DMA2EN)) == RESET)
#endif /* STM32F101xE || STM32F103xE || STM32F101xG || STM32F103xG || STM32F105xC || STM32F107xC || STM32F100xE */
-#if defined (STM32F101xE) || defined (STM32F103xE) || defined(STM32F101xG) || defined(STM32F103xG) || defined (STM32F100xE)
+#if defined(STM32F101xE) || defined(STM32F103xE) || defined(STM32F101xG)\
+ || defined(STM32F103xG) || defined (STM32F100xE)
#define __HAL_RCC_FSMC_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_FSMCEN)) != RESET)
#define __HAL_RCC_FSMC_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_FSMCEN)) == RESET)
#endif /* STM32F101xE || STM32F103xE || STM32F101xG || STM32F103xG || STM32F100xE */
-#if defined (STM32F103xE) || defined(STM32F103xG)
+#if defined(STM32F103xE) || defined(STM32F103xG)
#define __HAL_RCC_SDIO_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_SDIOEN)) != RESET)
#define __HAL_RCC_SDIO_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_SDIOEN)) == RESET)
#endif /* STM32F103xE || STM32F103xG */
@@ -781,8 +794,8 @@
* @{
*/
-#if defined(STM32F103x6) || defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG) || \
- defined(STM32F105xC) ||defined (STM32F107xC)
+#if defined(STM32F103x6) || defined(STM32F103xB) || defined(STM32F103xE)\
+ || defined(STM32F103xG) || defined(STM32F105xC) ||defined(STM32F107xC)
#define __HAL_RCC_CAN1_CLK_ENABLE() do { \
__IO uint32_t tmpreg; \
SET_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN1EN);\
@@ -794,9 +807,10 @@
#define __HAL_RCC_CAN1_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CAN1EN))
#endif /* STM32F103x6 || STM32F103xB || STM32F103xE || STM32F103xG || STM32F105xC || STM32F107xC */
-#if defined(STM32F100xB) || defined(STM32F100xE) || defined(STM32F101xB) || defined(STM32F101xE) || \
- defined(STM32F101xG) || defined(STM32F102xB) || defined(STM32F103xB) || defined(STM32F103xE) || \
- defined(STM32F103xG) || defined(STM32F105xC) || defined(STM32F107xC)
+#if defined(STM32F100xB) || defined(STM32F100xE) || defined(STM32F101xB)\
+ || defined(STM32F101xE) || defined(STM32F101xG) || defined(STM32F102xB)\
+ || defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG)\
+ || defined(STM32F105xC) || defined(STM32F107xC)
#define __HAL_RCC_TIM4_CLK_ENABLE() do { \
__IO uint32_t tmpreg; \
SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM4EN);\
@@ -835,7 +849,8 @@
#define __HAL_RCC_I2C2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C2EN))
#endif /* STM32F100xB || STM32F101xB || STM32F101xE || (...) || STM32F105xC || STM32F107xC */
-#if defined(STM32F102x6) || defined(STM32F102xB) || defined(STM32F103x6) || defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG)
+#if defined(STM32F102x6) || defined(STM32F102xB) || defined(STM32F103x6)\
+ || defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG)
#define __HAL_RCC_USB_CLK_ENABLE() do { \
__IO uint32_t tmpreg; \
SET_BIT(RCC->APB1ENR, RCC_APB1ENR_USBEN);\
@@ -847,8 +862,8 @@
#define __HAL_RCC_USB_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_USBEN))
#endif /* STM32F102x6 || STM32F102xB || STM32F103x6 || STM32F103xB || STM32F103xE || STM32F103xG */
-#if defined(STM32F101xE) || defined(STM32F103xE) || defined(STM32F101xG) || defined(STM32F103xG) || \
- defined(STM32F105xC) || defined(STM32F107xC)
+#if defined(STM32F101xE) || defined(STM32F103xE) || defined(STM32F101xG)\
+ || defined(STM32F103xG) || defined(STM32F105xC) || defined(STM32F107xC)
#define __HAL_RCC_TIM5_CLK_ENABLE() do { \
__IO uint32_t tmpreg; \
SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM5EN);\
@@ -1073,14 +1088,15 @@
* @{
*/
-#if defined(STM32F103x6) || defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG) || \
- defined(STM32F105xC) ||defined (STM32F107xC)
+#if defined(STM32F103x6) || defined(STM32F103xB) || defined(STM32F103xE)\
+ || defined(STM32F103xG) || defined(STM32F105xC) ||defined(STM32F107xC)
#define __HAL_RCC_CAN1_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN1EN)) != RESET)
#define __HAL_RCC_CAN1_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN1EN)) == RESET)
#endif /* STM32F103x6 || STM32F103xB || STM32F103xE || STM32F103xG || STM32F105xC || STM32F107xC */
-#if defined(STM32F100xB) || defined(STM32F100xE) || defined(STM32F101xB) || defined(STM32F101xE) || \
- defined(STM32F101xG) || defined(STM32F102xB) || defined(STM32F103xB) || defined(STM32F103xE) || \
- defined(STM32F103xG) || defined(STM32F105xC) || defined(STM32F107xC)
+#if defined(STM32F100xB) || defined(STM32F100xE) || defined(STM32F101xB)\
+ || defined(STM32F101xE) || defined(STM32F101xG) || defined(STM32F102xB)\
+ || defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG)\
+ || defined(STM32F105xC) || defined(STM32F107xC)
#define __HAL_RCC_TIM4_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM4EN)) != RESET)
#define __HAL_RCC_TIM4_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM4EN)) == RESET)
#define __HAL_RCC_SPI2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI2EN)) != RESET)
@@ -1090,12 +1106,13 @@
#define __HAL_RCC_I2C2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C2EN)) != RESET)
#define __HAL_RCC_I2C2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C2EN)) == RESET)
#endif /* STM32F100xB || STM32F101xB || STM32F101xE || (...) || STM32F105xC || STM32F107xC */
-#if defined(STM32F102x6) || defined(STM32F102xB) || defined(STM32F103x6) || defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG)
+#if defined(STM32F102x6) || defined(STM32F102xB) || defined(STM32F103x6)\
+ || defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG)
#define __HAL_RCC_USB_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USBEN)) != RESET)
#define __HAL_RCC_USB_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USBEN)) == RESET)
#endif /* STM32F102x6 || STM32F102xB || STM32F103x6 || STM32F103xB || STM32F103xE || STM32F103xG */
-#if defined(STM32F101xE) || defined(STM32F103xE) || defined(STM32F101xG) || defined(STM32F103xG) || \
- defined(STM32F105xC) || defined(STM32F107xC)
+#if defined(STM32F101xE) || defined(STM32F103xE) || defined(STM32F101xG)\
+ || defined(STM32F103xG) || defined(STM32F105xC) || defined(STM32F107xC)
#define __HAL_RCC_TIM5_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM5EN)) != RESET)
#define __HAL_RCC_TIM5_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM5EN)) == RESET)
#define __HAL_RCC_TIM6_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM6EN)) != RESET)
@@ -1162,8 +1179,9 @@
* @{
*/
-#if defined(STM32F101xG) || defined(STM32F103x6) || defined(STM32F103xB) || defined(STM32F105xC) || \
- defined(STM32F107xC) || defined(STM32F103xE) || defined(STM32F103xG)
+#if defined(STM32F101xG) || defined(STM32F103x6) || defined(STM32F103xB)\
+ || defined(STM32F105xC) || defined(STM32F107xC) || defined(STM32F103xE)\
+ || defined(STM32F103xG)
#define __HAL_RCC_ADC2_CLK_ENABLE() do { \
__IO uint32_t tmpreg; \
SET_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC2EN);\
@@ -1175,7 +1193,7 @@
#define __HAL_RCC_ADC2_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_ADC2EN))
#endif /* STM32F101xG || STM32F103x6 || STM32F103xB || STM32F105xC || STM32F107xC || STM32F103xE || STM32F103xG */
-#if defined (STM32F100xB) || defined (STM32F100xE)
+#if defined(STM32F100xB) || defined(STM32F100xE)
#define __HAL_RCC_TIM15_CLK_ENABLE() do { \
__IO uint32_t tmpreg; \
SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM15EN);\
@@ -1205,9 +1223,10 @@
#define __HAL_RCC_TIM17_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM17EN))
#endif /* STM32F100xB || STM32F100xE */
-#if defined(STM32F100xE) || defined(STM32F101xB) || defined(STM32F101xE) || defined(STM32F101xG) || \
- defined(STM32F100xB) || defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG) || \
- defined(STM32F105xC) || defined(STM32F107xC)
+#if defined(STM32F100xE) || defined(STM32F101xB) || defined(STM32F101xE)\
+ || defined(STM32F101xG) || defined(STM32F100xB) || defined(STM32F103xB)\
+ || defined(STM32F103xE) || defined(STM32F103xG) || defined(STM32F105xC)\
+ || defined(STM32F107xC)
#define __HAL_RCC_GPIOE_CLK_ENABLE() do { \
__IO uint32_t tmpreg; \
SET_BIT(RCC->APB2ENR, RCC_APB2ENR_IOPEEN);\
@@ -1219,7 +1238,8 @@
#define __HAL_RCC_GPIOE_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_IOPEEN))
#endif /* STM32F101x6 || STM32F101xB || STM32F101xE || (...) || STM32F105xC || STM32F107xC */
-#if defined (STM32F101xE) || defined (STM32F103xE) || defined(STM32F101xG) || defined(STM32F103xG)
+#if defined(STM32F101xE) || defined(STM32F103xE) || defined(STM32F101xG)\
+ || defined(STM32F103xG)
#define __HAL_RCC_GPIOF_CLK_ENABLE() do { \
__IO uint32_t tmpreg; \
SET_BIT(RCC->APB2ENR, RCC_APB2ENR_IOPFEN);\
@@ -1240,7 +1260,7 @@
#define __HAL_RCC_GPIOG_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_IOPGEN))
#endif /* STM32F101xE || STM32F103xE || STM32F101xG || STM32F103xG*/
-#if defined (STM32F103xE) || defined (STM32F103xG)
+#if defined(STM32F103xE) || defined(STM32F103xG)
#define __HAL_RCC_TIM8_CLK_ENABLE() do { \
__IO uint32_t tmpreg; \
SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM8EN);\
@@ -1261,7 +1281,7 @@
#define __HAL_RCC_ADC3_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_ADC3EN))
#endif /* STM32F103xE || STM32F103xG */
-#if defined (STM32F100xE)
+#if defined(STM32F100xE)
#define __HAL_RCC_GPIOF_CLK_ENABLE() do { \
__IO uint32_t tmpreg; \
SET_BIT(RCC->APB2ENR, RCC_APB2ENR_IOPFEN);\
@@ -1324,12 +1344,13 @@
* @{
*/
-#if defined(STM32F101xG) || defined(STM32F103x6) || defined(STM32F103xB) || defined(STM32F105xC) || \
- defined(STM32F107xC) || defined(STM32F103xE) || defined(STM32F103xG)
+#if defined(STM32F101xG) || defined(STM32F103x6) || defined(STM32F103xB)\
+ || defined(STM32F105xC) || defined(STM32F107xC) || defined(STM32F103xE)\
+ || defined(STM32F103xG)
#define __HAL_RCC_ADC2_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC2EN)) != RESET)
#define __HAL_RCC_ADC2_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC2EN)) == RESET)
#endif /* STM32F101xG || STM32F103x6 || STM32F103xB || STM32F105xC || STM32F107xC || STM32F103xE || STM32F103xG */
-#if defined (STM32F100xB) || defined (STM32F100xE)
+#if defined(STM32F100xB) || defined(STM32F100xE)
#define __HAL_RCC_TIM15_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM15EN)) != RESET)
#define __HAL_RCC_TIM15_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM15EN)) == RESET)
#define __HAL_RCC_TIM16_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM16EN)) != RESET)
@@ -1337,25 +1358,27 @@
#define __HAL_RCC_TIM17_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM17EN)) != RESET)
#define __HAL_RCC_TIM17_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM17EN)) == RESET)
#endif /* STM32F100xB || STM32F100xE */
-#if defined(STM32F100xE) || defined(STM32F101xB) || defined(STM32F101xE) || defined(STM32F101xG) || \
- defined(STM32F100xB) || defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG) || \
- defined(STM32F105xC) || defined(STM32F107xC)
+#if defined(STM32F100xE) || defined(STM32F101xB) || defined(STM32F101xE)\
+ || defined(STM32F101xG) || defined(STM32F100xB) || defined(STM32F103xB)\
+ || defined(STM32F103xE) || defined(STM32F103xG) || defined(STM32F105xC)\
+ || defined(STM32F107xC)
#define __HAL_RCC_GPIOE_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_IOPEEN)) != RESET)
#define __HAL_RCC_GPIOE_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_IOPEEN)) == RESET)
#endif /* STM32F101x6 || STM32F101xB || STM32F101xE || (...) || STM32F105xC || STM32F107xC */
-#if defined (STM32F101xE) || defined (STM32F103xE) || defined(STM32F101xG) || defined(STM32F103xG)
+#if defined(STM32F101xE) || defined(STM32F103xE) || defined(STM32F101xG)\
+ || defined(STM32F103xG)
#define __HAL_RCC_GPIOF_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_IOPFEN)) != RESET)
#define __HAL_RCC_GPIOF_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_IOPFEN)) == RESET)
#define __HAL_RCC_GPIOG_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_IOPGEN)) != RESET)
#define __HAL_RCC_GPIOG_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_IOPGEN)) == RESET)
#endif /* STM32F101xE || STM32F103xE || STM32F101xG || STM32F103xG*/
-#if defined (STM32F103xE) || defined (STM32F103xG)
+#if defined(STM32F103xE) || defined(STM32F103xG)
#define __HAL_RCC_TIM8_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM8EN)) != RESET)
#define __HAL_RCC_TIM8_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM8EN)) == RESET)
#define __HAL_RCC_ADC3_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC3EN)) != RESET)
#define __HAL_RCC_ADC3_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC3EN)) == RESET)
#endif /* STM32F103xE || STM32F103xG */
-#if defined (STM32F100xE)
+#if defined(STM32F100xE)
#define __HAL_RCC_GPIOF_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_IOPFEN)) != RESET)
#define __HAL_RCC_GPIOF_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_IOPFEN)) == RESET)
#define __HAL_RCC_GPIOG_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_IOPGEN)) != RESET)
@@ -1379,7 +1402,7 @@
* @brief Force or release AHB peripheral reset.
* @{
*/
-#define __HAL_RCC_AHB_FORCE_RESET() (RCC->AHBRSTR = 0xFFFFFFFF)
+#define __HAL_RCC_AHB_FORCE_RESET() (RCC->AHBRSTR = 0xFFFFFFFFU)
#define __HAL_RCC_USB_OTG_FS_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_OTGFSRST))
#if defined(STM32F107xC)
#define __HAL_RCC_ETHMAC_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_ETHMACRST))
@@ -1401,16 +1424,17 @@
* @{
*/
-#if defined(STM32F103x6) || defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG) || \
- defined(STM32F105xC) ||defined (STM32F107xC)
+#if defined(STM32F103x6) || defined(STM32F103xB) || defined(STM32F103xE)\
+ || defined(STM32F103xG) || defined(STM32F105xC) ||defined(STM32F107xC)
#define __HAL_RCC_CAN1_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CAN1RST))
#define __HAL_RCC_CAN1_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CAN1RST))
#endif /* STM32F103x6 || STM32F103xB || STM32F103xE || STM32F103xG || STM32F105xC || STM32F107xC */
-#if defined(STM32F100xB) || defined(STM32F100xE) || defined(STM32F101xB) || defined(STM32F101xE) || \
- defined(STM32F101xG) || defined(STM32F102xB) || defined(STM32F103xB) || defined(STM32F103xE) || \
- defined(STM32F103xG) || defined(STM32F105xC) || defined(STM32F107xC)
+#if defined(STM32F100xB) || defined(STM32F100xE) || defined(STM32F101xB)\
+ || defined(STM32F101xE) || defined(STM32F101xG) || defined(STM32F102xB)\
+ || defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG)\
+ || defined(STM32F105xC) || defined(STM32F107xC)
#define __HAL_RCC_TIM4_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM4RST))
#define __HAL_RCC_SPI2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_SPI2RST))
#define __HAL_RCC_USART3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_USART3RST))
@@ -1422,13 +1446,14 @@
#define __HAL_RCC_I2C2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C2RST))
#endif /* STM32F100xB || STM32F101xB || STM32F101xE || (...) || STM32F105xC || STM32F107xC */
-#if defined(STM32F102x6) || defined(STM32F102xB) || defined(STM32F103x6) || defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG)
+#if defined(STM32F102x6) || defined(STM32F102xB) || defined(STM32F103x6)\
+ || defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG)
#define __HAL_RCC_USB_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_USBRST))
#define __HAL_RCC_USB_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USBRST))
#endif /* STM32F102x6 || STM32F102xB || STM32F103x6 || STM32F103xB || STM32F103xE || STM32F103xG */
-#if defined(STM32F101xE) || defined(STM32F103xE) || defined(STM32F101xG) || defined(STM32F103xG) || \
- defined(STM32F105xC) || defined(STM32F107xC)
+#if defined(STM32F101xE) || defined(STM32F103xE) || defined(STM32F101xG)\
+ || defined(STM32F103xG) || defined(STM32F105xC) || defined(STM32F107xC)
#define __HAL_RCC_TIM5_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM5RST))
#define __HAL_RCC_TIM6_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM6RST))
#define __HAL_RCC_TIM7_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM7RST))
@@ -1501,14 +1526,15 @@
* @{
*/
-#if defined(STM32F101xG) || defined(STM32F103x6) || defined(STM32F103xB) || defined(STM32F105xC) || \
- defined(STM32F107xC) || defined(STM32F103xE) || defined(STM32F103xG)
+#if defined(STM32F101xG) || defined(STM32F103x6) || defined(STM32F103xB)\
+ || defined(STM32F105xC) || defined(STM32F107xC) || defined(STM32F103xE)\
+ || defined(STM32F103xG)
#define __HAL_RCC_ADC2_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_ADC2RST))
#define __HAL_RCC_ADC2_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_ADC2RST))
#endif /* STM32F101xG || STM32F103x6 || STM32F103xB || STM32F105xC || STM32F107xC || STM32F103xE || STM32F103xG */
-#if defined (STM32F100xB) || defined (STM32F100xE)
+#if defined(STM32F100xB) || defined(STM32F100xE)
#define __HAL_RCC_TIM15_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM15RST))
#define __HAL_RCC_TIM16_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM16RST))
#define __HAL_RCC_TIM17_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM17RST))
@@ -1518,15 +1544,17 @@
#define __HAL_RCC_TIM17_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM17RST))
#endif /* STM32F100xB || STM32F100xE */
-#if defined(STM32F100xE) || defined(STM32F101xB) || defined(STM32F101xE) || defined(STM32F101xG) || \
- defined(STM32F100xB) || defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG) || \
- defined(STM32F105xC) || defined(STM32F107xC)
+#if defined(STM32F100xE) || defined(STM32F101xB) || defined(STM32F101xE)\
+ || defined(STM32F101xG) || defined(STM32F100xB) || defined(STM32F103xB)\
+ || defined(STM32F103xE) || defined(STM32F103xG) || defined(STM32F105xC)\
+ || defined(STM32F107xC)
#define __HAL_RCC_GPIOE_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_IOPERST))
#define __HAL_RCC_GPIOE_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_IOPERST))
#endif /* STM32F101x6 || STM32F101xB || STM32F101xE || (...) || STM32F105xC || STM32F107xC */
-#if defined (STM32F101xE) || defined (STM32F103xE) || defined(STM32F101xG) || defined(STM32F103xG)
+#if defined(STM32F101xE) || defined(STM32F103xE) || defined(STM32F101xG)\
+ || defined(STM32F103xG)
#define __HAL_RCC_GPIOF_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_IOPFRST))
#define __HAL_RCC_GPIOG_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_IOPGRST))
@@ -1534,7 +1562,7 @@
#define __HAL_RCC_GPIOG_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_IOPGRST))
#endif /* STM32F101xE || STM32F103xE || STM32F101xG || STM32F103xG*/
-#if defined (STM32F103xE) || defined (STM32F103xG)
+#if defined(STM32F103xE) || defined(STM32F103xG)
#define __HAL_RCC_TIM8_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM8RST))
#define __HAL_RCC_ADC3_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_ADC3RST))
@@ -1542,7 +1570,7 @@
#define __HAL_RCC_ADC3_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_ADC3RST))
#endif /* STM32F103xE || STM32F103xG */
-#if defined (STM32F100xE)
+#if defined(STM32F100xE)
#define __HAL_RCC_GPIOF_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_IOPFRST))
#define __HAL_RCC_GPIOG_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_IOPGRST))
@@ -1568,13 +1596,14 @@
* @{
*/
-#if defined(STM32F105xC) || defined(STM32F107xC) || defined (STM32F100xB) || defined (STM32F100xE)
+#if defined(STM32F105xC) || defined(STM32F107xC) || defined(STM32F100xB)\
+ || defined(STM32F100xE)
/**
* @brief Macro to configure the External High Speed oscillator (HSE) Predivision factor for PLL.
* @note Predivision factor can not be changed if PLL is used as system clock
* In this case, you have to select another source of the system clock, disable the PLL and
* then change the HSE predivision factor.
- * @param __HSE_PREDIV_VALUE__: specifies the division value applied to HSE.
+ * @param __HSE_PREDIV_VALUE__ specifies the division value applied to HSE.
* This parameter must be a number between RCC_HSE_PREDIV_DIV1 and RCC_HSE_PREDIV_DIV16.
*/
#define __HAL_RCC_HSE_PREDIV_CONFIG(__HSE_PREDIV_VALUE__) MODIFY_REG(RCC->CFGR2, RCC_CFGR2_PREDIV1, (uint32_t)(__HSE_PREDIV_VALUE__))
@@ -1584,7 +1613,7 @@
* @note Predivision factor can not be changed if PLL is used as system clock
* In this case, you have to select another source of the system clock, disable the PLL and
* then change the HSE predivision factor.
- * @param __HSE_PREDIV_VALUE__: specifies the division value applied to HSE.
+ * @param __HSE_PREDIV_VALUE__ specifies the division value applied to HSE.
* This parameter must be a number between RCC_HSE_PREDIV_DIV1 and RCC_HSE_PREDIV_DIV2.
*/
#define __HAL_RCC_HSE_PREDIV_CONFIG(__HSE_PREDIV_VALUE__) \
@@ -1592,7 +1621,8 @@
#endif /* STM32F105xC || STM32F107xC */
-#if defined(STM32F105xC) || defined(STM32F107xC) || defined (STM32F100xB) || defined (STM32F100xE)
+#if defined(STM32F105xC) || defined(STM32F107xC) || defined(STM32F100xB)\
+ || defined(STM32F100xE)
/**
* @brief Macro to get prediv1 factor for PLL.
*/
@@ -1631,17 +1661,17 @@
/** @brief macros to configure the main PLLI2S multiplication factor.
* @note This function must be used only when the main PLLI2S is disabled.
*
- * @param __PLLI2SMUL__: specifies the multiplication factor for PLLI2S VCO output clock
+ * @param __PLLI2SMUL__ specifies the multiplication factor for PLLI2S VCO output clock
* This parameter can be one of the following values:
- * @arg RCC_PLLI2S_MUL8: PLLI2SVCO = PLLI2S clock entry x 8
- * @arg RCC_PLLI2S_MUL9: PLLI2SVCO = PLLI2S clock entry x 9
- * @arg RCC_PLLI2S_MUL10: PLLI2SVCO = PLLI2S clock entry x 10
- * @arg RCC_PLLI2S_MUL11: PLLI2SVCO = PLLI2S clock entry x 11
- * @arg RCC_PLLI2S_MUL12: PLLI2SVCO = PLLI2S clock entry x 12
- * @arg RCC_PLLI2S_MUL13: PLLI2SVCO = PLLI2S clock entry x 13
- * @arg RCC_PLLI2S_MUL14: PLLI2SVCO = PLLI2S clock entry x 14
- * @arg RCC_PLLI2S_MUL16: PLLI2SVCO = PLLI2S clock entry x 16
- * @arg RCC_PLLI2S_MUL20: PLLI2SVCO = PLLI2S clock entry x 20
+ * @arg @ref RCC_PLLI2S_MUL8 PLLI2SVCO = PLLI2S clock entry x 8
+ * @arg @ref RCC_PLLI2S_MUL9 PLLI2SVCO = PLLI2S clock entry x 9
+ * @arg @ref RCC_PLLI2S_MUL10 PLLI2SVCO = PLLI2S clock entry x 10
+ * @arg @ref RCC_PLLI2S_MUL11 PLLI2SVCO = PLLI2S clock entry x 11
+ * @arg @ref RCC_PLLI2S_MUL12 PLLI2SVCO = PLLI2S clock entry x 12
+ * @arg @ref RCC_PLLI2S_MUL13 PLLI2SVCO = PLLI2S clock entry x 13
+ * @arg @ref RCC_PLLI2S_MUL14 PLLI2SVCO = PLLI2S clock entry x 14
+ * @arg @ref RCC_PLLI2S_MUL16 PLLI2SVCO = PLLI2S clock entry x 16
+ * @arg @ref RCC_PLLI2S_MUL20 PLLI2SVCO = PLLI2S clock entry x 20
*
*/
#define __HAL_RCC_PLLI2S_CONFIG(__PLLI2SMUL__)\
@@ -1658,20 +1688,21 @@
* @{
*/
-#if defined(STM32F102x6) || defined(STM32F102xB) || defined(STM32F103x6) || defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG)
+#if defined(STM32F102x6) || defined(STM32F102xB) || defined(STM32F103x6)\
+ || defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG)
/** @brief Macro to configure the USB clock.
- * @param __USBCLKSOURCE__: specifies the USB clock source.
+ * @param __USBCLKSOURCE__ specifies the USB clock source.
* This parameter can be one of the following values:
- * @arg RCC_USBPLLCLK_DIV1: PLL clock divided by 1 selected as USB clock
- * @arg RCC_USBPLLCLK_DIV1_5: PLL clock divided by 1.5 selected as USB clock
+ * @arg @ref RCC_USBCLKSOURCE_PLL PLL clock divided by 1 selected as USB clock
+ * @arg @ref RCC_USBCLKSOURCE_PLL_DIV1_5 PLL clock divided by 1.5 selected as USB clock
*/
#define __HAL_RCC_USB_CONFIG(__USBCLKSOURCE__) \
MODIFY_REG(RCC->CFGR, RCC_CFGR_USBPRE, (uint32_t)(__USBCLKSOURCE__))
/** @brief Macro to get the USB clock (USBCLK).
* @retval The clock source can be one of the following values:
- * @arg RCC_USBPLLCLK_DIV1: PLL clock divided by 1 selected as USB clock
- * @arg RCC_USBPLLCLK_DIV1_5: PLL clock divided by 1.5 selected as USB clock
+ * @arg @ref RCC_USBCLKSOURCE_PLL PLL clock divided by 1 selected as USB clock
+ * @arg @ref RCC_USBCLKSOURCE_PLL_DIV1_5 PLL clock divided by 1.5 selected as USB clock
*/
#define __HAL_RCC_GET_USB_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_USBPRE)))
@@ -1680,40 +1711,40 @@
#if defined(STM32F105xC) || defined(STM32F107xC)
/** @brief Macro to configure the USB OTSclock.
- * @param __USBCLKSOURCE__: specifies the USB clock source.
+ * @param __USBCLKSOURCE__ specifies the USB clock source.
* This parameter can be one of the following values:
- * @arg RCC_USBPLLCLK_DIV2: PLL clock divided by 2 selected as USB OTG FS clock
- * @arg RCC_USBPLLCLK_DIV3: PLL clock divided by 3 selected as USB OTG FS clock
+ * @arg @ref RCC_USBCLKSOURCE_PLL_DIV2 PLL clock divided by 2 selected as USB OTG FS clock
+ * @arg @ref RCC_USBCLKSOURCE_PLL_DIV3 PLL clock divided by 3 selected as USB OTG FS clock
*/
#define __HAL_RCC_USB_CONFIG(__USBCLKSOURCE__) \
MODIFY_REG(RCC->CFGR, RCC_CFGR_OTGFSPRE, (uint32_t)(__USBCLKSOURCE__))
/** @brief Macro to get the USB clock (USBCLK).
* @retval The clock source can be one of the following values:
- * @arg RCC_USBPLLCLK_DIV2: PLL clock divided by 2 selected as USB OTG FS clock
- * @arg RCC_USBPLLCLK_DIV3: PLL clock divided by 3 selected as USB OTG FS clock
+ * @arg @ref RCC_USBCLKSOURCE_PLL_DIV2 PLL clock divided by 2 selected as USB OTG FS clock
+ * @arg @ref RCC_USBCLKSOURCE_PLL_DIV3 PLL clock divided by 3 selected as USB OTG FS clock
*/
#define __HAL_RCC_GET_USB_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_OTGFSPRE)))
#endif /* STM32F105xC || STM32F107xC */
/** @brief Macro to configure the ADCx clock (x=1 to 3 depending on devices).
- * @param __ADCCLKSOURCE__: specifies the ADC clock source.
+ * @param __ADCCLKSOURCE__ specifies the ADC clock source.
* This parameter can be one of the following values:
- * @arg RCC_ADCPCLK2_DIV2: PCLK2 clock divided by 2 selected as ADC clock
- * @arg RCC_ADCPCLK2_DIV4: PCLK2 clock divided by 4 selected as ADC clock
- * @arg RCC_ADCPCLK2_DIV6: PCLK2 clock divided by 6 selected as ADC clock
- * @arg RCC_ADCPCLK2_DIV8: PCLK2 clock divided by 8 selected as ADC clock
+ * @arg @ref RCC_ADCPCLK2_DIV2 PCLK2 clock divided by 2 selected as ADC clock
+ * @arg @ref RCC_ADCPCLK2_DIV4 PCLK2 clock divided by 4 selected as ADC clock
+ * @arg @ref RCC_ADCPCLK2_DIV6 PCLK2 clock divided by 6 selected as ADC clock
+ * @arg @ref RCC_ADCPCLK2_DIV8 PCLK2 clock divided by 8 selected as ADC clock
*/
#define __HAL_RCC_ADC_CONFIG(__ADCCLKSOURCE__) \
MODIFY_REG(RCC->CFGR, RCC_CFGR_ADCPRE, (uint32_t)(__ADCCLKSOURCE__))
/** @brief Macro to get the ADC clock (ADCxCLK, x=1 to 3 depending on devices).
* @retval The clock source can be one of the following values:
- * @arg RCC_ADCPCLK2_DIV2: PCLK2 clock divided by 2 selected as ADC clock
- * @arg RCC_ADCPCLK2_DIV4: PCLK2 clock divided by 4 selected as ADC clock
- * @arg RCC_ADCPCLK2_DIV6: PCLK2 clock divided by 6 selected as ADC clock
- * @arg RCC_ADCPCLK2_DIV8: PCLK2 clock divided by 8 selected as ADC clock
+ * @arg @ref RCC_ADCPCLK2_DIV2 PCLK2 clock divided by 2 selected as ADC clock
+ * @arg @ref RCC_ADCPCLK2_DIV4 PCLK2 clock divided by 4 selected as ADC clock
+ * @arg @ref RCC_ADCPCLK2_DIV6 PCLK2 clock divided by 6 selected as ADC clock
+ * @arg @ref RCC_ADCPCLK2_DIV8 PCLK2 clock divided by 8 selected as ADC clock
*/
#define __HAL_RCC_GET_ADC_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_ADCPRE)))
@@ -1732,7 +1763,7 @@
* @note Predivision factor can not be changed if PLL2 is used indirectly as system clock
* In this case, you have to select another source of the system clock, disable the PLL2 and PLLI2S and
* then change the PREDIV2 factor.
- * @param __HSE_PREDIV2_VALUE__: specifies the PREDIV2 value applied to PLL2 & PLLI2S.
+ * @param __HSE_PREDIV2_VALUE__ specifies the PREDIV2 value applied to PLL2 & PLLI2S.
* This parameter must be a number between RCC_HSE_PREDIV2_DIV1 and RCC_HSE_PREDIV2_DIV16.
*/
#define __HAL_RCC_HSE_PREDIV2_CONFIG(__HSE_PREDIV2_VALUE__) \
@@ -1757,28 +1788,28 @@
* be used as system clock source.
* @note The main PLL2 is disabled by hardware when entering STOP and STANDBY modes.
*/
-#define __HAL_RCC_PLL2_ENABLE() (*(__IO uint32_t *) CR_PLL2ON_BB = ENABLE)
+#define __HAL_RCC_PLL2_ENABLE() (*(__IO uint32_t *) RCC_CR_PLL2ON_BB = ENABLE)
/** @brief Macros to disable the main PLL2.
* @note The main PLL2 can not be disabled if it is used indirectly as system clock source
* @note The main PLL2 is disabled by hardware when entering STOP and STANDBY modes.
*/
-#define __HAL_RCC_PLL2_DISABLE() (*(__IO uint32_t *) CR_PLL2ON_BB = DISABLE)
+#define __HAL_RCC_PLL2_DISABLE() (*(__IO uint32_t *) RCC_CR_PLL2ON_BB = DISABLE)
/** @brief macros to configure the main PLL2 multiplication factor.
* @note This function must be used only when the main PLL2 is disabled.
*
- * @param __PLL2MUL__: specifies the multiplication factor for PLL2 VCO output clock
+ * @param __PLL2MUL__ specifies the multiplication factor for PLL2 VCO output clock
* This parameter can be one of the following values:
- * @arg RCC_PLL2_MUL8: PLL2VCO = PLL2 clock entry x 8
- * @arg RCC_PLL2_MUL9: PLL2VCO = PLL2 clock entry x 9
- * @arg RCC_PLL2_MUL10: PLL2VCO = PLL2 clock entry x 10
- * @arg RCC_PLL2_MUL11: PLL2VCO = PLL2 clock entry x 11
- * @arg RCC_PLL2_MUL12: PLL2VCO = PLL2 clock entry x 12
- * @arg RCC_PLL2_MUL13: PLL2VCO = PLL2 clock entry x 13
- * @arg RCC_PLL2_MUL14: PLL2VCO = PLL2 clock entry x 14
- * @arg RCC_PLL2_MUL16: PLL2VCO = PLL2 clock entry x 16
- * @arg RCC_PLL2_MUL20: PLL2VCO = PLL2 clock entry x 20
+ * @arg @ref RCC_PLL2_MUL8 PLL2VCO = PLL2 clock entry x 8
+ * @arg @ref RCC_PLL2_MUL9 PLL2VCO = PLL2 clock entry x 9
+ * @arg @ref RCC_PLL2_MUL10 PLL2VCO = PLL2 clock entry x 10
+ * @arg @ref RCC_PLL2_MUL11 PLL2VCO = PLL2 clock entry x 11
+ * @arg @ref RCC_PLL2_MUL12 PLL2VCO = PLL2 clock entry x 12
+ * @arg @ref RCC_PLL2_MUL13 PLL2VCO = PLL2 clock entry x 13
+ * @arg @ref RCC_PLL2_MUL14 PLL2VCO = PLL2 clock entry x 14
+ * @arg @ref RCC_PLL2_MUL16 PLL2VCO = PLL2 clock entry x 16
+ * @arg @ref RCC_PLL2_MUL20 PLL2VCO = PLL2 clock entry x 20
*
*/
#define __HAL_RCC_PLL2_CONFIG(__PLL2MUL__)\
@@ -1794,34 +1825,34 @@
*/
/** @brief Macro to configure the I2S2 clock.
- * @param __I2S2CLKSOURCE__: specifies the I2S2 clock source.
+ * @param __I2S2CLKSOURCE__ specifies the I2S2 clock source.
* This parameter can be one of the following values:
- * @arg RCC_I2S2CLKSOURCE_SYSCLK: system clock selected as I2S3 clock entry
- * @arg RCC_I2S2CLKSOURCE_PLLI2S_VCO: PLLI2S VCO clock selected as I2S3 clock entry
+ * @arg @ref RCC_I2S2CLKSOURCE_SYSCLK system clock selected as I2S3 clock entry
+ * @arg @ref RCC_I2S2CLKSOURCE_PLLI2S_VCO PLLI2S VCO clock selected as I2S3 clock entry
*/
#define __HAL_RCC_I2S2_CONFIG(__I2S2CLKSOURCE__) \
MODIFY_REG(RCC->CFGR2, RCC_CFGR2_I2S2SRC, (uint32_t)(__I2S2CLKSOURCE__))
/** @brief Macro to get the I2S2 clock (I2S2CLK).
* @retval The clock source can be one of the following values:
- * @arg RCC_I2S2CLKSOURCE_SYSCLK: system clock selected as I2S3 clock entry
- * @arg RCC_I2S2CLKSOURCE_PLLI2S_VCO: PLLI2S VCO clock selected as I2S3 clock entry
+ * @arg @ref RCC_I2S2CLKSOURCE_SYSCLK system clock selected as I2S3 clock entry
+ * @arg @ref RCC_I2S2CLKSOURCE_PLLI2S_VCO PLLI2S VCO clock selected as I2S3 clock entry
*/
#define __HAL_RCC_GET_I2S2_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR2, RCC_CFGR2_I2S2SRC)))
/** @brief Macro to configure the I2S3 clock.
- * @param __I2S2CLKSOURCE__: specifies the I2S3 clock source.
+ * @param __I2S2CLKSOURCE__ specifies the I2S3 clock source.
* This parameter can be one of the following values:
- * @arg RCC_I2S3CLKSOURCE_SYSCLK: system clock selected as I2S3 clock entry
- * @arg RCC_I2S3CLKSOURCE_PLLI2S_VCO: PLLI2S VCO clock selected as I2S3 clock entry
+ * @arg @ref RCC_I2S3CLKSOURCE_SYSCLK system clock selected as I2S3 clock entry
+ * @arg @ref RCC_I2S3CLKSOURCE_PLLI2S_VCO PLLI2S VCO clock selected as I2S3 clock entry
*/
#define __HAL_RCC_I2S3_CONFIG(__I2S2CLKSOURCE__) \
MODIFY_REG(RCC->CFGR2, RCC_CFGR2_I2S3SRC, (uint32_t)(__I2S2CLKSOURCE__))
/** @brief Macro to get the I2S3 clock (I2S3CLK).
* @retval The clock source can be one of the following values:
- * @arg RCC_I2S3CLKSOURCE_SYSCLK: system clock selected as I2S3 clock entry
- * @arg RCC_I2S3CLKSOURCE_PLLI2S_VCO: PLLI2S VCO clock selected as I2S3 clock entry
+ * @arg @ref RCC_I2S3CLKSOURCE_SYSCLK system clock selected as I2S3 clock entry
+ * @arg @ref RCC_I2S3CLKSOURCE_PLLI2S_VCO PLLI2S VCO clock selected as I2S3 clock entry
*/
#define __HAL_RCC_GET_I2S3_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR2, RCC_CFGR2_I2S3SRC)))