cc y / mbed

ads1115 only

Fork of mbed by mbed official

TARGET_UBLOX_C027/PinNames.h@77:869cf507173a, 2014-02-14 (annotated)

Committer:
emilmont
Date:
Fri Feb 14 14:36:43 2014 +0000
Revision:
77:869cf507173a
Child:
81:7d30d6019079
Release 77 of the mbed library



Main changes:

* Add target NUCLEO_F030R8

* Add target NUCLEO_F401RE

* Add target NUCLEO_F103RB

* Add target NUCLEO_L152RE

Who changed what in which revision?

UserRevisionLine numberNew contents of line
emilmont 77:869cf507173a 1 /* mbed Microcontroller Library
emilmont 77:869cf507173a 2 * Copyright (c) 2006-2013 ARM Limited
emilmont 77:869cf507173a 3 *
emilmont 77:869cf507173a 4 * Licensed under the Apache License, Version 2.0 (the "License");
emilmont 77:869cf507173a 5 * you may not use this file except in compliance with the License.
emilmont 77:869cf507173a 6 * You may obtain a copy of the License at
emilmont 77:869cf507173a 7 *
emilmont 77:869cf507173a 8 * http://www.apache.org/licenses/LICENSE-2.0
emilmont 77:869cf507173a 9 *
emilmont 77:869cf507173a 10 * Unless required by applicable law or agreed to in writing, software
emilmont 77:869cf507173a 11 * distributed under the License is distributed on an "AS IS" BASIS,
emilmont 77:869cf507173a 12 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
emilmont 77:869cf507173a 13 * See the License for the specific language governing permissions and
emilmont 77:869cf507173a 14 * limitations under the License.
emilmont 77:869cf507173a 15 */
emilmont 77:869cf507173a 16 #ifndef MBED_PINNAMES_H
emilmont 77:869cf507173a 17 #define MBED_PINNAMES_H
emilmont 77:869cf507173a 18
emilmont 77:869cf507173a 19 #include "cmsis.h"
emilmont 77:869cf507173a 20
emilmont 77:869cf507173a 21 #ifdef __cplusplus
emilmont 77:869cf507173a 22 extern "C" {
emilmont 77:869cf507173a 23 #endif
emilmont 77:869cf507173a 24
emilmont 77:869cf507173a 25 typedef enum {
emilmont 77:869cf507173a 26 PIN_INPUT,
emilmont 77:869cf507173a 27 PIN_OUTPUT
emilmont 77:869cf507173a 28 } PinDirection;
emilmont 77:869cf507173a 29
emilmont 77:869cf507173a 30 #define PORT_SHIFT 5
emilmont 77:869cf507173a 31
emilmont 77:869cf507173a 32 typedef enum {
emilmont 77:869cf507173a 33 // LPC Pin Names
emilmont 77:869cf507173a 34 P0_0 = LPC_GPIO0_BASE,
emilmont 77:869cf507173a 35 P0_1, P0_2, P0_3, P0_4, P0_5, P0_6, P0_7, P0_8, P0_9, P0_10, P0_11, P0_12, P0_13, P0_14, P0_15, P0_16, P0_17, P0_18, P0_19, P0_20, P0_21, P0_22, P0_23, P0_24, P0_25, P0_26, P0_27, P0_28, P0_29, P0_30, P0_31,
emilmont 77:869cf507173a 36 P1_0, P1_1, P1_2, P1_3, P1_4, P1_5, P1_6, P1_7, P1_8, P1_9, P1_10, P1_11, P1_12, P1_13, P1_14, P1_15, P1_16, P1_17, P1_18, P1_19, P1_20, P1_21, P1_22, P1_23, P1_24, P1_25, P1_26, P1_27, P1_28, P1_29, P1_30, P1_31,
emilmont 77:869cf507173a 37 P2_0, P2_1, P2_2, P2_3, P2_4, P2_5, P2_6, P2_7, P2_8, P2_9, P2_10, P2_11, P2_12, P2_13, P2_14, P2_15, P2_16, P2_17, P2_18, P2_19, P2_20, P2_21, P2_22, P2_23, P2_24, P2_25, P2_26, P2_27, P2_28, P2_29, P2_30, P2_31,
emilmont 77:869cf507173a 38 P3_0, P3_1, P3_2, P3_3, P3_4, P3_5, P3_6, P3_7, P3_8, P3_9, P3_10, P3_11, P3_12, P3_13, P3_14, P3_15, P3_16, P3_17, P3_18, P3_19, P3_20, P3_21, P3_22, P3_23, P3_24, P3_25, P3_26, P3_27, P3_28, P3_29, P3_30, P3_31,
emilmont 77:869cf507173a 39 P4_0, P4_1, P4_2, P4_3, P4_4, P4_5, P4_6, P4_7, P4_8, P4_9, P4_10, P4_11, P4_12, P4_13, P4_14, P4_15, P4_16, P4_17, P4_18, P4_19, P4_20, P4_21, P4_22, P4_23, P4_24, P4_25, P4_26, P4_27, P4_28, P4_29, P4_30, P4_31,
emilmont 77:869cf507173a 40
emilmont 77:869cf507173a 41 // Arduino Pin Names
emilmont 77:869cf507173a 42
emilmont 77:869cf507173a 43 // PIN header connector
emilmont 77:869cf507173a 44 // for standard-based form factor with expansion board
emilmont 77:869cf507173a 45 // -----------------------------------------------------------
emilmont 77:869cf507173a 46 // PMW = Pulswidth Modulator
emilmont 77:869cf507173a 47 // EINT = External Interrupt
emilmont 77:869cf507173a 48 // AOUT = Analog Output
emilmont 77:869cf507173a 49
emilmont 77:869cf507173a 50 // Analog Ports (A0-A5)
emilmont 77:869cf507173a 51 A0 = P0_23, // I2S_CLK
emilmont 77:869cf507173a 52 A1 = P0_24, // I2S_WS
emilmont 77:869cf507173a 53 A2 = P0_25, // I2S_SDA
emilmont 77:869cf507173a 54 A3 = P0_26, // AOUT
emilmont 77:869cf507173a 55 A4 = P1_30, //
emilmont 77:869cf507173a 56 A5 = P1_31, //
emilmont 77:869cf507173a 57 // Digital Port (D0-D7)
emilmont 77:869cf507173a 58 D0 = P4_29, // TXD
emilmont 77:869cf507173a 59 D1 = P4_28, // RXD
emilmont 77:869cf507173a 60 D2 = P2_13, // EINT
emilmont 77:869cf507173a 61 D3 = P2_0, // PWM
emilmont 77:869cf507173a 62 D4 = P2_12, // EINT
emilmont 77:869cf507173a 63 D5 = P2_1, // PWM
emilmont 77:869cf507173a 64 D6 = P2_2, // PWM
emilmont 77:869cf507173a 65 D7 = P2_11, // EINT
emilmont 77:869cf507173a 66 // Digital Port (D8-D13)
emilmont 77:869cf507173a 67 D8 = P2_4, // PWM
emilmont 77:869cf507173a 68 D9 = P2_3, // PWM
emilmont 77:869cf507173a 69 D10 = P1_21, // PWM SSEL
emilmont 77:869cf507173a 70 D11 = P1_24, // PWM MOSI
emilmont 77:869cf507173a 71 D12 = P1_23, // PWM MISO
emilmont 77:869cf507173a 72 D13 = P1_20, // PWM SCK
emilmont 77:869cf507173a 73 // GND
emilmont 77:869cf507173a 74 // AREF
emilmont 77:869cf507173a 75 SDA = P0_0,
emilmont 77:869cf507173a 76 D14 = SDA,
emilmont 77:869cf507173a 77 SCL = P0_1,
emilmont 77:869cf507173a 78 D15 = SCL,
emilmont 77:869cf507173a 79
emilmont 77:869cf507173a 80 // I2C (shared with LISA/SARA)
emilmont 77:869cf507173a 81 GPSSDA = P0_27,
emilmont 77:869cf507173a 82 GPSSCL = P0_28,
emilmont 77:869cf507173a 83 // UART
emilmont 77:869cf507173a 84 GPSTXD = P0_10,
emilmont 77:869cf507173a 85 GPSRXD = P0_11,
emilmont 77:869cf507173a 86 // Control
emilmont 77:869cf507173a 87 GPSRST = P1_18, // Reset (input to GPS, active low)
emilmont 77:869cf507173a 88 GPSPPS = P1_19, // 1PPS Timepulse (output from GPS)
emilmont 77:869cf507173a 89 GPSINT = P1_22, // Interrupt (input to GPS)
emilmont 77:869cf507173a 90 GPSEN = P1_29, // Supply Control (high = enabled)
emilmont 77:869cf507173a 91
emilmont 77:869cf507173a 92 // u-blox LISA/SARA cellular modem
emilmont 77:869cf507173a 93 // http://www.u-blox.com/wireless-modules.html
emilmont 77:869cf507173a 94 // -----------------------------------------------------------
emilmont 77:869cf507173a 95 // UART (LPC1768 = DTE, LISA/SARA = DCE)
emilmont 77:869cf507173a 96 MDMTXD = P0_15, // Transmit Data
emilmont 77:869cf507173a 97 MDMRXD = P0_16, // Receive Data
emilmont 77:869cf507173a 98 MDMCTS = P0_17, // Clear to Send
emilmont 77:869cf507173a 99 MDMDCD = P0_18, // Data Carrier Detect
emilmont 77:869cf507173a 100 MDMDSR = P0_19, // Data Set Ready
emilmont 77:869cf507173a 101 MDMDTR = P0_20, // Data Terminal Ready (set high or use handshake)
emilmont 77:869cf507173a 102 MDMRI = P0_21, // Ring Indicator
emilmont 77:869cf507173a 103 MDMRTS = P0_22, // Request to Send (set high or use handshake)
emilmont 77:869cf507173a 104
emilmont 77:869cf507173a 105 // USB (not available on C27-G35)
emilmont 77:869cf507173a 106 MDMUSBDP = P0_29, // USB D+
emilmont 77:869cf507173a 107 MDMUSBDN = P0_30, // USB D-
emilmont 77:869cf507173a 108 MDMUSBCON = P2_9, // USB Connect
emilmont 77:869cf507173a 109 MDMUSBDET = P0_7, // USB Detect (n/a on REV.A board)
emilmont 77:869cf507173a 110 // Control
emilmont 77:869cf507173a 111 MDMEN = P2_5, // Supply Control (high = enabled)
emilmont 77:869cf507173a 112 MDMPWRON = P2_6, //
emilmont 77:869cf507173a 113 MDMGPIO1 = P2_7, // GPIO1, Network status
emilmont 77:869cf507173a 114 MDMRST = P2_8, // Reset (active low, set as open drain!)
emilmont 77:869cf507173a 115 MDMLVLOE = P0_9, // Serial/GPIO Level Shifter Output Enable (n/a on REV.A board)
emilmont 77:869cf507173a 116 MDMILVLOE = P0_8, // I2C Level Shifter Output Enable (n/a on REV.A board)
emilmont 77:869cf507173a 117
emilmont 77:869cf507173a 118 // CAN (TJA1040)
emilmont 77:869cf507173a 119 // -----------------------------------------------------------
emilmont 77:869cf507173a 120 CANRD = P0_4,
emilmont 77:869cf507173a 121 CANTD = P0_5,
emilmont 77:869cf507173a 122 CANS = P0_6, // standby (low=normal, high=standby/rxonly)
emilmont 77:869cf507173a 123
emilmont 77:869cf507173a 124 // Ethernet (DP83848)
emilmont 77:869cf507173a 125 // -----------------------------------------------------------
emilmont 77:869cf507173a 126 ETHTXD0 = P1_0,
emilmont 77:869cf507173a 127 ETHTXD1 = P1_1,
emilmont 77:869cf507173a 128 ETHTXEN = P1_4,
emilmont 77:869cf507173a 129 ETHCRS = P1_8,
emilmont 77:869cf507173a 130 ETHRXD0 = P1_9,
emilmont 77:869cf507173a 131 ETHRXD1 = P1_10,
emilmont 77:869cf507173a 132 ETHRXEN = P1_14,
emilmont 77:869cf507173a 133 ETHREFCLK = P1_15,
emilmont 77:869cf507173a 134 ETHMDC = P1_16,
emilmont 77:869cf507173a 135 ETHMDIO = P1_17,
emilmont 77:869cf507173a 136 ETHOSCEN = P1_27,
emilmont 77:869cf507173a 137 ETHRST = P1_28,
emilmont 77:869cf507173a 138 ETHLINK = P1_25, // LED_LINK
emilmont 77:869cf507173a 139 ETHSPEED = P1_26, // LED_SPEED
emilmont 77:869cf507173a 140
emilmont 77:869cf507173a 141 // ISP port
emilmont 77:869cf507173a 142 // -----------------------------------------------------------
emilmont 77:869cf507173a 143 ISP = P2_10,
emilmont 77:869cf507173a 144
emilmont 77:869cf507173a 145 // Other mbed Pin Names
emilmont 77:869cf507173a 146 LED = P3_25,
emilmont 77:869cf507173a 147 LED1 = LED,
emilmont 77:869cf507173a 148 LED_RED = LED,
emilmont 77:869cf507173a 149
emilmont 77:869cf507173a 150 // mbed / debug IF (LPC11)
emilmont 77:869cf507173a 151 // -----------------------------------------------------------
emilmont 77:869cf507173a 152 // Serial Port
emilmont 77:869cf507173a 153 USBTX = P0_2,
emilmont 77:869cf507173a 154 USBRX = P0_3,
emilmont 77:869cf507173a 155 USBTXD = USBTX, // identical USBTX
emilmont 77:869cf507173a 156 USBRXD = USBRX, // identical USBRX
emilmont 77:869cf507173a 157
emilmont 77:869cf507173a 158 // Not connected
emilmont 77:869cf507173a 159 NC = (int)0xFFFFFFFF
emilmont 77:869cf507173a 160 } PinName;
emilmont 77:869cf507173a 161
emilmont 77:869cf507173a 162 typedef enum {
emilmont 77:869cf507173a 163 PullUp = 0,
emilmont 77:869cf507173a 164 PullDown = 3,
emilmont 77:869cf507173a 165 PullNone = 2,
emilmont 77:869cf507173a 166 OpenDrain = 4
emilmont 77:869cf507173a 167 } PinMode;
emilmont 77:869cf507173a 168
emilmont 77:869cf507173a 169 // version of PINCON_TypeDef using register arrays
emilmont 77:869cf507173a 170 typedef struct {
emilmont 77:869cf507173a 171 __IO uint32_t PINSEL[11];
emilmont 77:869cf507173a 172 uint32_t RESERVED0[5];
emilmont 77:869cf507173a 173 __IO uint32_t PINMODE[10];
emilmont 77:869cf507173a 174 __IO uint32_t PINMODE_OD[5];
emilmont 77:869cf507173a 175 } PINCONARRAY_TypeDef;
emilmont 77:869cf507173a 176
emilmont 77:869cf507173a 177 #define PINCONARRAY ((PINCONARRAY_TypeDef *)LPC_PINCON_BASE)
emilmont 77:869cf507173a 178
emilmont 77:869cf507173a 179 //Additional C027 stuff
emilmont 77:869cf507173a 180 #define GPSADR (66<<1) // GPS I2C Address
emilmont 77:869cf507173a 181 #define GPSBAUD 9600 // Default GPS Baud Rate
emilmont 77:869cf507173a 182 #define MDMBAUD 115200 // Default Modem Baud Rate
emilmont 77:869cf507173a 183
emilmont 77:869cf507173a 184 #ifdef __cplusplus
emilmont 77:869cf507173a 185 }
emilmont 77:869cf507173a 186 #endif
emilmont 77:869cf507173a 187
emilmont 77:869cf507173a 188 #endif