Graham Cantin
trying to make telnetserver repo public
Diff: example2.cpp
- Revision:
- 12:8c7394e2ae7f
- Child:
- 13:70bb7c1769fa
diff -r a93a62eeeb9d -r 8c7394e2ae7f example2.cpp
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/example2.cpp Thu Jan 20 11:57:32 2011 +0000
@@ -0,0 +1,148 @@
+/*
+ Copyright (c) 2011 Andy Kirkham
+
+ Permission is hereby granted, free of charge, to any person obtaining a copy
+ of this software and associated documentation files (the "Software"), to deal
+ in the Software without restriction, including without limitation the rights
+ to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ copies of the Software, and to permit persons to whom the Software is
+ furnished to do so, subject to the following conditions:
+
+ The above copyright notice and this permission notice shall be included in
+ all copies or substantial portions of the Software.
+
+ THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ THE SOFTWARE.
+
+ @file example2.cpp
+ @purpose Demos a simple messaging system.
+ @version see ChangeLog.c
+ @date Jan 2011
+ @author Andy Kirkham
+*/
+
+/*
+ This example demostrates a simple "messaging" system. You can use it with
+ a terminal program to test it out or write a cusom C#/C++/VB/etc program
+ to read and write messages to or from the Mbed. The default buad rate in
+ this example is 115200.
+
+ In this example, the LEDs are controlled and pins p21 to p24 are set as
+ InterruptIn and send messages out when their value changes.
+
+ To use, hook up the MBed USB and open your fav terminal. All messages
+ end with the \n character, don't forget to hit carriage return!.
+ As an example:-
+
+ to switch on LED1 send LED1:1\n, off is LED1:0\n and toggle is LED1:2\n
+ to switch on LED2 send LED2:1\n, off is LED2:0\n and toggle is LED2:2\n
+ to switch on LED3 send LED3:1\n, off is LED3:0\n and toggle is LED3:2\n
+ to switch on LED4 send LED4:1\n, off is LED4:0\n and toggle is LED4:2\n
+
+ When a pin change on p21 to p24 happens, a message is sent. As an example
+ when p21 goes low PIN21:0\n is sent, when goes high PIN21:1\n is sent.
+
+ Note, the InterruptIn pins p21 to p24 are setup to have pullups. This means
+ they are high. To activate them use a wire to short the pin to 0volts.
+
+ If you find that p21 to p24 sent a lot of on/off/on/off then it's probably
+ due to "bounce". If you are connecting a mechanical switch to a pin you
+ may prefer to use the PinDetect library rather than using InterruptIn.
+ @see http://mbed.org/users/AjK/libraries/PinDetect/latest
+
+*/
+
+
+#ifdef COMPILE_EXAMPLE1_CODE_MODSERIAL
+
+#include "mbed.h"
+#include "MODSERIAL.h"
+
+#define MESSAGE_BUFFER_SIZE 32
+
+DigitalOut led1(LED1);
+DigitalOut led2(LED2);
+DigitalOut led3(LED3);
+DigitalOut led4(LED4);
+
+InterruptIn P21(p21);
+InterruptIn P22(p22);
+InterruptIn P23(p23);
+InterruptIn P24(p24);
+
+MODSERIAL messageSystem(USBTX, USBRX);
+char messageBufferIncoming[MESSAGE_BUFFER_SIZE];
+char messageBufferOutgoing[MESSAGE_BUFFER_SIZE];
+bool messageReceived;
+
+uint32_t pinChanged, pinAction;
+
+void messageReceive(void) {
+ messageSystem.move(messageBufferIncoming, MESSAGE_BUFFER_SIZE);
+ messageReceived = true;
+}
+
+void messageProcess(void) {
+ if (!strncmp(messageBufferIncoming, "LED1:1", sizeof("LED1:1")-1)) led1 = 1;
+ else if (!strncmp(messageBufferIncoming, "LED1:0", sizeof("LED1:0")-1)) led1 = 0;
+ else if (!strncmp(messageBufferIncoming, "LED1:2", sizeof("LED1:2")-1)) led1 = !led1;
+
+ else if (!strncmp(messageBufferIncoming, "LED2:1", sizeof("LED2:1")-1)) led2 = 1;
+ else if (!strncmp(messageBufferIncoming, "LED2:0", sizeof("LED2:0")-1)) led2 = 0;
+ else if (!strncmp(messageBufferIncoming, "LED2:2", sizeof("LED2:2")-1)) led2 = !led2;
+
+ else if (!strncmp(messageBufferIncoming, "LED3:1", sizeof("LED3:1")-1)) led3 = 1;
+ else if (!strncmp(messageBufferIncoming, "LED3:0", sizeof("LED3:0")-1)) led3 = 0;
+ else if (!strncmp(messageBufferIncoming, "LED3:2", sizeof("LED3:2")-1)) led3 = !led3;
+
+ else if (!strncmp(messageBufferIncoming, "LED4:1", sizeof("LED4:1")-1)) led4 = 1;
+ else if (!strncmp(messageBufferIncoming, "LED4:0", sizeof("LED4:0")-1)) led4 = 0;
+ else if (!strncmp(messageBufferIncoming, "LED4:2", sizeof("LED4:2")-1)) led4 = !led4;
+
+ messageReceived = false;
+}
+
+#define PIN_MESSAGE_SEND(x,y) sprintf(messageBufferOutgoing,"PIN%02d:%d\n",x,y);messageSystem.puts(messageBufferOutgoing);
+
+void pin21Rise(void) { PIN_MESSAGE_SEND(21, 1); }
+void pin21Fall(void) { PIN_MESSAGE_SEND(21, 0); }
+void pin22Rise(void) { PIN_MESSAGE_SEND(22, 1); }
+void pin22Fall(void) { PIN_MESSAGE_SEND(22, 0); }
+void pin23Rise(void) { PIN_MESSAGE_SEND(23, 1); }
+void pin23Fall(void) { PIN_MESSAGE_SEND(23, 0); }
+void pin24Rise(void) { PIN_MESSAGE_SEND(24, 1); }
+void pin24Fall(void) { PIN_MESSAGE_SEND(24, 0); }
+
+int main() {
+
+ messageReceived = false;
+ messageSystem.baud(115200);
+ messageSystem.attach(&messageReceive, MODSERIAL::RxAutoDetect);
+ messageSystem.autoDectectChar('\n');
+
+ pinChanged = pinAction = 0;
+
+ // Enable pullup resistors on pins.
+ P21.mode(PullUp); P22.mode(PullUp); P23.mode(PullUp); P24.mode(PullUp);
+
+ // Fix Mbed library bug, see http://mbed.org/forum/bugs-suggestions/topic/1498
+ LPC_GPIOINT->IO2IntClr = (1UL << 5) | (1UL << 4) | (1UL << 3) | (1UL << 2);
+
+ // Attach callbacks.
+ P21.rise(&pin21Rise); P21.fall(&pin21Fall);
+ P22.rise(&pin22Rise); P22.fall(&pin22Fall);
+ P23.rise(&pin23Rise); P23.fall(&pin23Fall);
+ P24.rise(&pin24Rise); P24.fall(&pin24Fall);
+
+ while(1) {
+ // Process incoming messages.
+ if (messageReceived) messageProcess();
+ }
+}
+
+#endif