Diff: mbed-os/features/netsocket/UDPSocket.h

Revision:

0:8fdf9a60065b

diff -r 000000000000 -r 8fdf9a60065b mbed-os/features/netsocket/UDPSocket.h
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed-os/features/netsocket/UDPSocket.h	Wed Oct 10 00:33:53 2018 +0000
@@ -0,0 +1,188 @@
+
+/** \addtogroup netsocket */
+/** @{*/
+/* UDPSocket
+ * Copyright (c) 2015 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef UDPSOCKET_H
+#define UDPSOCKET_H
+
+#include "netsocket/InternetSocket.h"
+#include "netsocket/NetworkStack.h"
+#include "netsocket/NetworkInterface.h"
+#include "rtos/EventFlags.h"
+
+
+/** UDP socket
+ */
+class UDPSocket : public InternetSocket {
+public:
+    /** Create an uninitialized socket
+     *
+     *  Must call open to initialize the socket on a network stack.
+     */
+    UDPSocket();
+
+    /** Create a socket on a network interface
+     *
+     *  Creates and opens a socket on the network stack of the given
+     *  network interface.
+     *
+     *  @param stack    Network stack as target for socket
+     */
+    template <typename S>
+    UDPSocket(S *stack)
+    {
+        open(stack);
+    }
+
+    /** Destroy a socket
+     *
+     *  Closes socket if the socket is still open
+     */
+    virtual ~UDPSocket();
+
+    /** Send a packet over a UDP socket
+     *
+     *  Sends data to the specified address specified by either a domain name
+     *  or an IP address and port. Returns the number of bytes sent from the
+     *  buffer.
+     *
+     *  By default, sendto blocks until data is sent. If socket is set to
+     *  non-blocking or times out, NSAPI_ERROR_WOULD_BLOCK is returned
+     *  immediately.
+     *
+     *  @param host     Hostname of the remote host
+     *  @param port     Port of the remote host
+     *  @param data     Buffer of data to send to the host
+     *  @param size     Size of the buffer in bytes
+     *  @return         Number of sent bytes on success, negative error
+     *                  code on failure
+     */
+    virtual nsapi_size_or_error_t sendto(const char *host, uint16_t port,
+                                         const void *data, nsapi_size_t size);
+
+    /** Send a packet over a UDP socket
+     *
+     *  Sends data to the specified address. Returns the number of bytes
+     *  sent from the buffer.
+     *
+     *  By default, sendto blocks until data is sent. If socket is set to
+     *  non-blocking or times out, NSAPI_ERROR_WOULD_BLOCK is returned
+     *  immediately.
+     *
+     *  @param address  The SocketAddress of the remote host
+     *  @param data     Buffer of data to send to the host
+     *  @param size     Size of the buffer in bytes
+     *  @return         Number of sent bytes on success, negative error
+     *                  code on failure
+     */
+    virtual nsapi_size_or_error_t sendto(const SocketAddress &address,
+                                         const void *data, nsapi_size_t size);
+
+    /** Receive a datagram over a UDP socket
+     *
+     *  Receives a datagram and stores the source address in address if address
+     *  is not NULL. Returns the number of bytes written into the buffer. If the
+     *  datagram is larger than the buffer, the excess data is silently discarded.
+     *
+     *  If socket is connected, only packets coming from connected peer address
+     *  are accepted.
+     *
+     *  @note recvfrom() is allowed write to address and data buffers even if error occurs.
+     *
+     *  By default, recvfrom blocks until a datagram is received. If socket is set to
+     *  non-blocking or times out with no datagram, NSAPI_ERROR_WOULD_BLOCK
+     *  is returned.
+     *
+     *  @param address  Destination for the source address or NULL
+     *  @param data     Destination buffer for datagram received from the host
+     *  @param size     Size of the buffer in bytes
+     *  @return         Number of received bytes on success, negative error
+     *                  code on failure
+     */
+    virtual nsapi_size_or_error_t recvfrom(SocketAddress *address,
+                                           void *data, nsapi_size_t size);
+
+    /** Set remote peer address
+     *
+     *  Set the remote address for next send() call and filtering
+     *  for incomming packets. To reset the address, zero initialised
+     *  SocketAddress must be in the address parameter.
+     *
+     *  @param address  The SocketAddress of the remote host
+     *  @return         0 on success, negative error code on failure
+     */
+    virtual nsapi_error_t connect(const SocketAddress &address);
+
+    /** Send a datagram to pre-specified remote.
+     *
+     *  The socket must be connected to a remote host before send() call.
+     *  Returns the number of bytes sent from the buffer.
+     *
+     *  By default, send blocks until all data is sent. If socket is set to
+     *  non-blocking or times out, a partial amount can be written.
+     *  NSAPI_ERROR_WOULD_BLOCK is returned if no data was written.
+     *
+     *  @param data     Buffer of data to send to the host
+     *  @param size     Size of the buffer in bytes
+     *  @return         Number of sent bytes on success, negative error
+     *                  code on failure.
+     */
+    virtual nsapi_size_or_error_t send(const void *data, nsapi_size_t size);
+
+    /** Receive data from a socket.
+     *
+     *  This is equivalent of calling recvfrom(NULL, data, size).
+     *
+     *  If socket is connected, only packets coming from connected peer address
+     *  are accepted.
+     *
+     *  @note recv() is allowed write to data buffer even if error occurs.
+     *
+     *  By default, recv blocks until some data is received. If socket is set to
+     *  non-blocking or times out, NSAPI_ERROR_WOULD_BLOCK can be returned to
+     *  indicate no data.
+     *
+     *  @param data     Destination buffer for data received from the host
+     *  @param size     Size of the buffer in bytes
+     *  @return         Number of received bytes on success, negative error
+     *                  code on failure.
+     */
+    virtual nsapi_size_or_error_t recv(void *data, nsapi_size_t size);
+
+    /** Not implemented for UDP
+     *
+     *  @param error      unused
+     *  @return           NSAPI_ERROR_UNSUPPORTED
+     */
+    virtual Socket *accept(nsapi_error_t *error = NULL);
+
+    /** Not implemented for UDP
+     *
+     *  @param backlog    unused
+     *  @return           NSAPI_ERROR_UNSUPPORTED
+     */
+    virtual nsapi_error_t listen(int backlog = 1);
+
+protected:
+    virtual nsapi_protocol_t get_proto();
+};
+
+
+#endif
+
+/** @}*/