![](/media/cache/img/default_profile.jpg.50x50_q85.jpg)
Color Oled(SSD1331) connect to STMicroelectronics Nucleo-F466
mbed-os/cmsis/TARGET_CORTEX_A/irq_ctrl.h
- Committer:
- kadonotakashi
- Date:
- 2018-10-11
- Revision:
- 3:f3764f852aa8
- Parent:
- 0:8fdf9a60065b
File content as of revision 3:f3764f852aa8:
/**************************************************************************//** * @file irq_ctrl.h * @brief Interrupt Controller API header file * @version V1.0.0 * @date 23. June 2017 ******************************************************************************/ /* * Copyright (c) 2017 ARM Limited. All rights reserved. * * SPDX-License-Identifier: Apache-2.0 * * Licensed under the Apache License, Version 2.0 (the License); you may * not use this file except in compliance with the License. * You may obtain a copy of the License at * * www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an AS IS BASIS, WITHOUT * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. */ #if defined ( __ICCARM__ ) #pragma system_include /* treat file as system include file for MISRA check */ #elif defined (__clang__) #pragma clang system_header /* treat file as system include file */ #endif #ifndef IRQ_CTRL_H_ #define IRQ_CTRL_H_ #include <stdint.h> #ifndef IRQHANDLER_T #define IRQHANDLER_T /// Interrupt handler data type typedef void (*IRQHandler_t) (void); #endif #ifndef IRQN_ID_T #define IRQN_ID_T /// Interrupt ID number data type typedef int32_t IRQn_ID_t; #endif /* Interrupt mode bit-masks */ #define IRQ_MODE_TRIG_Pos (0U) #define IRQ_MODE_TRIG_Msk (0x07UL /*<< IRQ_MODE_TRIG_Pos*/) #define IRQ_MODE_TRIG_LEVEL (0x00UL /*<< IRQ_MODE_TRIG_Pos*/) ///< Trigger: level triggered interrupt #define IRQ_MODE_TRIG_LEVEL_LOW (0x01UL /*<< IRQ_MODE_TRIG_Pos*/) ///< Trigger: low level triggered interrupt #define IRQ_MODE_TRIG_LEVEL_HIGH (0x02UL /*<< IRQ_MODE_TRIG_Pos*/) ///< Trigger: high level triggered interrupt #define IRQ_MODE_TRIG_EDGE (0x04UL /*<< IRQ_MODE_TRIG_Pos*/) ///< Trigger: edge triggered interrupt #define IRQ_MODE_TRIG_EDGE_RISING (0x05UL /*<< IRQ_MODE_TRIG_Pos*/) ///< Trigger: rising edge triggered interrupt #define IRQ_MODE_TRIG_EDGE_FALLING (0x06UL /*<< IRQ_MODE_TRIG_Pos*/) ///< Trigger: falling edge triggered interrupt #define IRQ_MODE_TRIG_EDGE_BOTH (0x07UL /*<< IRQ_MODE_TRIG_Pos*/) ///< Trigger: rising and falling edge triggered interrupt #define IRQ_MODE_TYPE_Pos (3U) #define IRQ_MODE_TYPE_Msk (0x01UL << IRQ_MODE_TYPE_Pos) #define IRQ_MODE_TYPE_IRQ (0x00UL << IRQ_MODE_TYPE_Pos) ///< Type: interrupt source triggers CPU IRQ line #define IRQ_MODE_TYPE_FIQ (0x01UL << IRQ_MODE_TYPE_Pos) ///< Type: interrupt source triggers CPU FIQ line #define IRQ_MODE_DOMAIN_Pos (4U) #define IRQ_MODE_DOMAIN_Msk (0x01UL << IRQ_MODE_DOMAIN_Pos) #define IRQ_MODE_DOMAIN_NONSECURE (0x00UL << IRQ_MODE_DOMAIN_Pos) ///< Domain: interrupt is targeting non-secure domain #define IRQ_MODE_DOMAIN_SECURE (0x01UL << IRQ_MODE_DOMAIN_Pos) ///< Domain: interrupt is targeting secure domain #define IRQ_MODE_CPU_Pos (5U) #define IRQ_MODE_CPU_Msk (0xFFUL << IRQ_MODE_CPU_Pos) #define IRQ_MODE_CPU_ALL (0x00UL << IRQ_MODE_CPU_Pos) ///< CPU: interrupt targets all CPUs #define IRQ_MODE_CPU_0 (0x01UL << IRQ_MODE_CPU_Pos) ///< CPU: interrupt targets CPU 0 #define IRQ_MODE_CPU_1 (0x02UL << IRQ_MODE_CPU_Pos) ///< CPU: interrupt targets CPU 1 #define IRQ_MODE_CPU_2 (0x04UL << IRQ_MODE_CPU_Pos) ///< CPU: interrupt targets CPU 2 #define IRQ_MODE_CPU_3 (0x08UL << IRQ_MODE_CPU_Pos) ///< CPU: interrupt targets CPU 3 #define IRQ_MODE_CPU_4 (0x10UL << IRQ_MODE_CPU_Pos) ///< CPU: interrupt targets CPU 4 #define IRQ_MODE_CPU_5 (0x20UL << IRQ_MODE_CPU_Pos) ///< CPU: interrupt targets CPU 5 #define IRQ_MODE_CPU_6 (0x40UL << IRQ_MODE_CPU_Pos) ///< CPU: interrupt targets CPU 6 #define IRQ_MODE_CPU_7 (0x80UL << IRQ_MODE_CPU_Pos) ///< CPU: interrupt targets CPU 7 #define IRQ_MODE_ERROR (0x80000000UL) ///< Bit indicating mode value error /* Interrupt priority bit-masks */ #define IRQ_PRIORITY_Msk (0x0000FFFFUL) ///< Interrupt priority value bit-mask #define IRQ_PRIORITY_ERROR (0x80000000UL) ///< Bit indicating priority value error /// Initialize interrupt controller. /// \return 0 on success, -1 on error. int32_t IRQ_Initialize (void); /// Register interrupt handler. /// \param[in] irqn interrupt ID number /// \param[in] handler interrupt handler function address /// \return 0 on success, -1 on error. int32_t IRQ_SetHandler (IRQn_ID_t irqn, IRQHandler_t handler); /// Get the registered interrupt handler. /// \param[in] irqn interrupt ID number /// \return registered interrupt handler function address. IRQHandler_t IRQ_GetHandler (IRQn_ID_t irqn); /// Enable interrupt. /// \param[in] irqn interrupt ID number /// \return 0 on success, -1 on error. int32_t IRQ_Enable (IRQn_ID_t irqn); /// Disable interrupt. /// \param[in] irqn interrupt ID number /// \return 0 on success, -1 on error. int32_t IRQ_Disable (IRQn_ID_t irqn); /// Get interrupt enable state. /// \param[in] irqn interrupt ID number /// \return 0 - interrupt is disabled, 1 - interrupt is enabled. uint32_t IRQ_GetEnableState (IRQn_ID_t irqn); /// Configure interrupt request mode. /// \param[in] irqn interrupt ID number /// \param[in] mode mode configuration /// \return 0 on success, -1 on error. int32_t IRQ_SetMode (IRQn_ID_t irqn, uint32_t mode); /// Get interrupt mode configuration. /// \param[in] irqn interrupt ID number /// \return current interrupt mode configuration with optional IRQ_MODE_ERROR bit set. uint32_t IRQ_GetMode (IRQn_ID_t irqn); /// Get ID number of current interrupt request (IRQ). /// \return interrupt ID number. IRQn_ID_t IRQ_GetActiveIRQ (void); /// Get ID number of current fast interrupt request (FIQ). /// \return interrupt ID number. IRQn_ID_t IRQ_GetActiveFIQ (void); /// Signal end of interrupt processing. /// \param[in] irqn interrupt ID number /// \return 0 on success, -1 on error. int32_t IRQ_EndOfInterrupt (IRQn_ID_t irqn); /// Set interrupt pending flag. /// \param[in] irqn interrupt ID number /// \return 0 on success, -1 on error. int32_t IRQ_SetPending (IRQn_ID_t irqn); /// Get interrupt pending flag. /// \param[in] irqn interrupt ID number /// \return 0 - interrupt is not pending, 1 - interrupt is pending. uint32_t IRQ_GetPending (IRQn_ID_t irqn); /// Clear interrupt pending flag. /// \param[in] irqn interrupt ID number /// \return 0 on success, -1 on error. int32_t IRQ_ClearPending (IRQn_ID_t irqn); /// Set interrupt priority value. /// \param[in] irqn interrupt ID number /// \param[in] priority interrupt priority value /// \return 0 on success, -1 on error. int32_t IRQ_SetPriority (IRQn_ID_t irqn, uint32_t priority); /// Get interrupt priority. /// \param[in] irqn interrupt ID number /// \return current interrupt priority value with optional IRQ_PRIORITY_ERROR bit set. uint32_t IRQ_GetPriority (IRQn_ID_t irqn); /// Set priority masking threshold. /// \param[in] priority priority masking threshold value /// \return 0 on success, -1 on error. int32_t IRQ_SetPriorityMask (uint32_t priority); /// Get priority masking threshold /// \return current priority masking threshold value with optional IRQ_PRIORITY_ERROR bit set. uint32_t IRQ_GetPriorityMask (void); /// Set priority grouping field split point /// \param[in] bits number of MSB bits included in the group priority field comparison /// \return 0 on success, -1 on error. int32_t IRQ_SetPriorityGroupBits (uint32_t bits); /// Get priority grouping field split point /// \return current number of MSB bits included in the group priority field comparison with /// optional IRQ_PRIORITY_ERROR bit set. uint32_t IRQ_GetPriorityGroupBits (void); #endif // IRQ_CTRL_H_