![](/media/cache/img/default_profile.jpg.50x50_q85.jpg)
Color Oled(SSD1331) connect to STMicroelectronics Nucleo-F466
mbed-os/targets/TARGET_Freescale/TARGET_MCUXpresso_MCUS/TARGET_K82F/drivers/fsl_sdhc.h
- Committer:
- kadonotakashi
- Date:
- 2018-10-10
- Revision:
- 0:8fdf9a60065b
File content as of revision 0:8fdf9a60065b:
/* * Copyright (c) 2015, Freescale Semiconductor, Inc. * All rights reserved. * * Redistribution and use in source and binary forms, with or without modification, * are permitted provided that the following conditions are met: * * o Redistributions of source code must retain the above copyright notice, this list * of conditions and the following disclaimer. * * o Redistributions in binary form must reproduce the above copyright notice, this * list of conditions and the following disclaimer in the documentation and/or * other materials provided with the distribution. * * o Neither the name of Freescale Semiconductor, Inc. nor the names of its * contributors may be used to endorse or promote products derived from this * software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #ifndef _FSL_SDHC_H_ #define _FSL_SDHC_H_ #include "fsl_common.h" /*! * @addtogroup sdhc * @{ */ /****************************************************************************** * Definitions. *****************************************************************************/ /*! @name Driver version */ /*@{*/ /*! @brief Driver version 2.1.2. */ #define FSL_SDHC_DRIVER_VERSION (MAKE_VERSION(2U, 1U, 2U)) /*@}*/ /*! @brief Maximum block count can be set one time */ #define SDHC_MAX_BLOCK_COUNT (SDHC_BLKATTR_BLKCNT_MASK >> SDHC_BLKATTR_BLKCNT_SHIFT) /*! @brief SDHC status */ enum _sdhc_status { kStatus_SDHC_BusyTransferring = MAKE_STATUS(kStatusGroup_SDHC, 0U), /*!< Transfer is on-going */ kStatus_SDHC_PrepareAdmaDescriptorFailed = MAKE_STATUS(kStatusGroup_SDHC, 1U), /*!< Set DMA descriptor failed */ kStatus_SDHC_SendCommandFailed = MAKE_STATUS(kStatusGroup_SDHC, 2U), /*!< Send command failed */ kStatus_SDHC_TransferDataFailed = MAKE_STATUS(kStatusGroup_SDHC, 3U), /*!< Transfer data failed */ }; /*! @brief Host controller capabilities flag mask */ enum _sdhc_capability_flag { kSDHC_SupportAdmaFlag = SDHC_HTCAPBLT_ADMAS_MASK, /*!< Support ADMA */ kSDHC_SupportHighSpeedFlag = SDHC_HTCAPBLT_HSS_MASK, /*!< Support high-speed */ kSDHC_SupportDmaFlag = SDHC_HTCAPBLT_DMAS_MASK, /*!< Support DMA */ kSDHC_SupportSuspendResumeFlag = SDHC_HTCAPBLT_SRS_MASK, /*!< Support suspend/resume */ kSDHC_SupportV330Flag = SDHC_HTCAPBLT_VS33_MASK, /*!< Support voltage 3.3V */ #if defined FSL_FEATURE_SDHC_HAS_V300_SUPPORT && FSL_FEATURE_SDHC_HAS_V300_SUPPORT kSDHC_SupportV300Flag = SDHC_HTCAPBLT_VS30_MASK, /*!< Support voltage 3.0V */ #endif #if defined FSL_FEATURE_SDHC_HAS_V180_SUPPORT && FSL_FEATURE_SDHC_HAS_V180_SUPPORT kSDHC_SupportV180Flag = SDHC_HTCAPBLT_VS18_MASK, /*!< Support voltage 1.8V */ #endif /* Put additional two flags in HTCAPBLT_MBL's position. */ kSDHC_Support4BitFlag = (SDHC_HTCAPBLT_MBL_SHIFT << 0U), /*!< Support 4 bit mode */ kSDHC_Support8BitFlag = (SDHC_HTCAPBLT_MBL_SHIFT << 1U), /*!< Support 8 bit mode */ }; /*! @brief Wakeup event mask */ enum _sdhc_wakeup_event { kSDHC_WakeupEventOnCardInt = SDHC_PROCTL_WECINT_MASK, /*!< Wakeup on card interrupt */ kSDHC_WakeupEventOnCardInsert = SDHC_PROCTL_WECINS_MASK, /*!< Wakeup on card insertion */ kSDHC_WakeupEventOnCardRemove = SDHC_PROCTL_WECRM_MASK, /*!< Wakeup on card removal */ kSDHC_WakeupEventsAll = (kSDHC_WakeupEventOnCardInt | kSDHC_WakeupEventOnCardInsert | kSDHC_WakeupEventOnCardRemove), /*!< All wakeup events */ }; /*! @brief Reset type mask */ enum _sdhc_reset { kSDHC_ResetAll = SDHC_SYSCTL_RSTA_MASK, /*!< Reset all except card detection */ kSDHC_ResetCommand = SDHC_SYSCTL_RSTC_MASK, /*!< Reset command line */ kSDHC_ResetData = SDHC_SYSCTL_RSTD_MASK, /*!< Reset data line */ kSDHC_ResetsAll = (kSDHC_ResetAll | kSDHC_ResetCommand | kSDHC_ResetData), /*!< All reset types */ }; /*! @brief Transfer flag mask */ enum _sdhc_transfer_flag { kSDHC_EnableDmaFlag = SDHC_XFERTYP_DMAEN_MASK, /*!< Enable DMA */ kSDHC_CommandTypeSuspendFlag = (SDHC_XFERTYP_CMDTYP(1U)), /*!< Suspend command */ kSDHC_CommandTypeResumeFlag = (SDHC_XFERTYP_CMDTYP(2U)), /*!< Resume command */ kSDHC_CommandTypeAbortFlag = (SDHC_XFERTYP_CMDTYP(3U)), /*!< Abort command */ kSDHC_EnableBlockCountFlag = SDHC_XFERTYP_BCEN_MASK, /*!< Enable block count */ kSDHC_EnableAutoCommand12Flag = SDHC_XFERTYP_AC12EN_MASK, /*!< Enable auto CMD12 */ kSDHC_DataReadFlag = SDHC_XFERTYP_DTDSEL_MASK, /*!< Enable data read */ kSDHC_MultipleBlockFlag = SDHC_XFERTYP_MSBSEL_MASK, /*!< Multiple block data read/write */ kSDHC_ResponseLength136Flag = SDHC_XFERTYP_RSPTYP(1U), /*!< 136 bit response length */ kSDHC_ResponseLength48Flag = SDHC_XFERTYP_RSPTYP(2U), /*!< 48 bit response length */ kSDHC_ResponseLength48BusyFlag = SDHC_XFERTYP_RSPTYP(3U), /*!< 48 bit response length with busy status */ kSDHC_EnableCrcCheckFlag = SDHC_XFERTYP_CCCEN_MASK, /*!< Enable CRC check */ kSDHC_EnableIndexCheckFlag = SDHC_XFERTYP_CICEN_MASK, /*!< Enable index check */ kSDHC_DataPresentFlag = SDHC_XFERTYP_DPSEL_MASK, /*!< Data present flag */ }; /*! @brief Present status flag mask */ enum _sdhc_present_status_flag { kSDHC_CommandInhibitFlag = SDHC_PRSSTAT_CIHB_MASK, /*!< Command inhibit */ kSDHC_DataInhibitFlag = SDHC_PRSSTAT_CDIHB_MASK, /*!< Data inhibit */ kSDHC_DataLineActiveFlag = SDHC_PRSSTAT_DLA_MASK, /*!< Data line active */ kSDHC_SdClockStableFlag = SDHC_PRSSTAT_SDSTB_MASK, /*!< SD bus clock stable */ kSDHC_WriteTransferActiveFlag = SDHC_PRSSTAT_WTA_MASK, /*!< Write transfer active */ kSDHC_ReadTransferActiveFlag = SDHC_PRSSTAT_RTA_MASK, /*!< Read transfer active */ kSDHC_BufferWriteEnableFlag = SDHC_PRSSTAT_BWEN_MASK, /*!< Buffer write enable */ kSDHC_BufferReadEnableFlag = SDHC_PRSSTAT_BREN_MASK, /*!< Buffer read enable */ kSDHC_CardInsertedFlag = SDHC_PRSSTAT_CINS_MASK, /*!< Card inserted */ kSDHC_CommandLineLevelFlag = SDHC_PRSSTAT_CLSL_MASK, /*!< Command line signal level */ kSDHC_Data0LineLevelFlag = (1U << 24U), /*!< Data0 line signal level */ kSDHC_Data1LineLevelFlag = (1U << 25U), /*!< Data1 line signal level */ kSDHC_Data2LineLevelFlag = (1U << 26U), /*!< Data2 line signal level */ kSDHC_Data3LineLevelFlag = (1U << 27U), /*!< Data3 line signal level */ kSDHC_Data4LineLevelFlag = (1U << 28U), /*!< Data4 line signal level */ kSDHC_Data5LineLevelFlag = (1U << 29U), /*!< Data5 line signal level */ kSDHC_Data6LineLevelFlag = (1U << 30U), /*!< Data6 line signal level */ kSDHC_Data7LineLevelFlag = (1U << 31U), /*!< Data7 line signal level */ }; /*! @brief Interrupt status flag mask */ enum _sdhc_interrupt_status_flag { kSDHC_CommandCompleteFlag = SDHC_IRQSTAT_CC_MASK, /*!< Command complete */ kSDHC_DataCompleteFlag = SDHC_IRQSTAT_TC_MASK, /*!< Data complete */ kSDHC_BlockGapEventFlag = SDHC_IRQSTAT_BGE_MASK, /*!< Block gap event */ kSDHC_DmaCompleteFlag = SDHC_IRQSTAT_DINT_MASK, /*!< DMA interrupt */ kSDHC_BufferWriteReadyFlag = SDHC_IRQSTAT_BWR_MASK, /*!< Buffer write ready */ kSDHC_BufferReadReadyFlag = SDHC_IRQSTAT_BRR_MASK, /*!< Buffer read ready */ kSDHC_CardInsertionFlag = SDHC_IRQSTAT_CINS_MASK, /*!< Card inserted */ kSDHC_CardRemovalFlag = SDHC_IRQSTAT_CRM_MASK, /*!< Card removed */ kSDHC_CardInterruptFlag = SDHC_IRQSTAT_CINT_MASK, /*!< Card interrupt */ kSDHC_CommandTimeoutFlag = SDHC_IRQSTAT_CTOE_MASK, /*!< Command timeout error */ kSDHC_CommandCrcErrorFlag = SDHC_IRQSTAT_CCE_MASK, /*!< Command CRC error */ kSDHC_CommandEndBitErrorFlag = SDHC_IRQSTAT_CEBE_MASK, /*!< Command end bit error */ kSDHC_CommandIndexErrorFlag = SDHC_IRQSTAT_CIE_MASK, /*!< Command index error */ kSDHC_DataTimeoutFlag = SDHC_IRQSTAT_DTOE_MASK, /*!< Data timeout error */ kSDHC_DataCrcErrorFlag = SDHC_IRQSTAT_DCE_MASK, /*!< Data CRC error */ kSDHC_DataEndBitErrorFlag = SDHC_IRQSTAT_DEBE_MASK, /*!< Data end bit error */ kSDHC_AutoCommand12ErrorFlag = SDHC_IRQSTAT_AC12E_MASK, /*!< Auto CMD12 error */ kSDHC_DmaErrorFlag = SDHC_IRQSTAT_DMAE_MASK, /*!< DMA error */ kSDHC_CommandErrorFlag = (kSDHC_CommandTimeoutFlag | kSDHC_CommandCrcErrorFlag | kSDHC_CommandEndBitErrorFlag | kSDHC_CommandIndexErrorFlag), /*!< Command error */ kSDHC_DataErrorFlag = (kSDHC_DataTimeoutFlag | kSDHC_DataCrcErrorFlag | kSDHC_DataEndBitErrorFlag | kSDHC_AutoCommand12ErrorFlag), /*!< Data error */ kSDHC_ErrorFlag = (kSDHC_CommandErrorFlag | kSDHC_DataErrorFlag | kSDHC_DmaErrorFlag), /*!< All error */ kSDHC_DataFlag = (kSDHC_DataCompleteFlag | kSDHC_DmaCompleteFlag | kSDHC_BufferWriteReadyFlag | kSDHC_BufferReadReadyFlag | kSDHC_DataErrorFlag | kSDHC_DmaErrorFlag), /*!< Data interrupts */ kSDHC_CommandFlag = (kSDHC_CommandErrorFlag | kSDHC_CommandCompleteFlag), /*!< Command interrupts */ kSDHC_CardDetectFlag = (kSDHC_CardInsertionFlag | kSDHC_CardRemovalFlag), /*!< Card detection interrupts */ kSDHC_AllInterruptFlags = (kSDHC_BlockGapEventFlag | kSDHC_CardInterruptFlag | kSDHC_CommandFlag | kSDHC_DataFlag | kSDHC_ErrorFlag), /*!< All flags mask */ }; /*! @brief Auto CMD12 error status flag mask */ enum _sdhc_auto_command12_error_status_flag { kSDHC_AutoCommand12NotExecutedFlag = SDHC_AC12ERR_AC12NE_MASK, /*!< Not executed error */ kSDHC_AutoCommand12TimeoutFlag = SDHC_AC12ERR_AC12TOE_MASK, /*!< Timeout error */ kSDHC_AutoCommand12EndBitErrorFlag = SDHC_AC12ERR_AC12EBE_MASK, /*!< End bit error */ kSDHC_AutoCommand12CrcErrorFlag = SDHC_AC12ERR_AC12CE_MASK, /*!< CRC error */ kSDHC_AutoCommand12IndexErrorFlag = SDHC_AC12ERR_AC12IE_MASK, /*!< Index error */ kSDHC_AutoCommand12NotIssuedFlag = SDHC_AC12ERR_CNIBAC12E_MASK, /*!< Not issued error */ }; /*! @brief ADMA error status flag mask */ enum _sdhc_adma_error_status_flag { kSDHC_AdmaLenghMismatchFlag = SDHC_ADMAES_ADMALME_MASK, /*!< Length mismatch error */ kSDHC_AdmaDescriptorErrorFlag = SDHC_ADMAES_ADMADCE_MASK, /*!< Descriptor error */ }; /*! * @brief ADMA error state * * This state is the detail state when ADMA error has occurred. */ typedef enum _sdhc_adma_error_state { kSDHC_AdmaErrorStateStopDma = 0x00U, /*!< Stop DMA */ kSDHC_AdmaErrorStateFetchDescriptor = 0x01U, /*!< Fetch descriptor */ kSDHC_AdmaErrorStateChangeAddress = 0x02U, /*!< Change address */ kSDHC_AdmaErrorStateTransferData = 0x03U, /*!< Transfer data */ } sdhc_adma_error_state_t; /*! @brief Force event mask */ enum _sdhc_force_event { kSDHC_ForceEventAutoCommand12NotExecuted = SDHC_FEVT_AC12NE_MASK, /*!< Auto CMD12 not executed error */ kSDHC_ForceEventAutoCommand12Timeout = SDHC_FEVT_AC12TOE_MASK, /*!< Auto CMD12 timeout error */ kSDHC_ForceEventAutoCommand12CrcError = SDHC_FEVT_AC12CE_MASK, /*!< Auto CMD12 CRC error */ kSDHC_ForceEventEndBitError = SDHC_FEVT_AC12EBE_MASK, /*!< Auto CMD12 end bit error */ kSDHC_ForceEventAutoCommand12IndexError = SDHC_FEVT_AC12IE_MASK, /*!< Auto CMD12 index error */ kSDHC_ForceEventAutoCommand12NotIssued = SDHC_FEVT_CNIBAC12E_MASK, /*!< Auto CMD12 not issued error */ kSDHC_ForceEventCommandTimeout = SDHC_FEVT_CTOE_MASK, /*!< Command timeout error */ kSDHC_ForceEventCommandCrcError = SDHC_FEVT_CCE_MASK, /*!< Command CRC error */ kSDHC_ForceEventCommandEndBitError = SDHC_FEVT_CEBE_MASK, /*!< Command end bit error */ kSDHC_ForceEventCommandIndexError = SDHC_FEVT_CIE_MASK, /*!< Command index error */ kSDHC_ForceEventDataTimeout = SDHC_FEVT_DTOE_MASK, /*!< Data timeout error */ kSDHC_ForceEventDataCrcError = SDHC_FEVT_DCE_MASK, /*!< Data CRC error */ kSDHC_ForceEventDataEndBitError = SDHC_FEVT_DEBE_MASK, /*!< Data end bit error */ kSDHC_ForceEventAutoCommand12Error = SDHC_FEVT_AC12E_MASK, /*!< Auto CMD12 error */ kSDHC_ForceEventCardInt = SDHC_FEVT_CINT_MASK, /*!< Card interrupt */ kSDHC_ForceEventDmaError = SDHC_FEVT_DMAE_MASK, /*!< Dma error */ kSDHC_ForceEventsAll = (kSDHC_ForceEventAutoCommand12NotExecuted | kSDHC_ForceEventAutoCommand12Timeout | kSDHC_ForceEventAutoCommand12CrcError | kSDHC_ForceEventEndBitError | kSDHC_ForceEventAutoCommand12IndexError | kSDHC_ForceEventAutoCommand12NotIssued | kSDHC_ForceEventCommandTimeout | kSDHC_ForceEventCommandCrcError | kSDHC_ForceEventCommandEndBitError | kSDHC_ForceEventCommandIndexError | kSDHC_ForceEventDataTimeout | kSDHC_ForceEventDataCrcError | kSDHC_ForceEventDataEndBitError | kSDHC_ForceEventAutoCommand12Error | kSDHC_ForceEventCardInt | kSDHC_ForceEventDmaError), /*!< All force event flags mask */ }; /*! @brief Data transfer width */ typedef enum _sdhc_data_bus_width { kSDHC_DataBusWidth1Bit = 0U, /*!< 1-bit mode */ kSDHC_DataBusWidth4Bit = 1U, /*!< 4-bit mode */ kSDHC_DataBusWidth8Bit = 2U, /*!< 8-bit mode */ } sdhc_data_bus_width_t; /*! @brief Endian mode */ typedef enum _sdhc_endian_mode { kSDHC_EndianModeBig = 0U, /*!< Big endian mode */ kSDHC_EndianModeHalfWordBig = 1U, /*!< Half word big endian mode */ kSDHC_EndianModeLittle = 2U, /*!< Little endian mode */ } sdhc_endian_mode_t; /*! @brief DMA mode */ typedef enum _sdhc_dma_mode { kSDHC_DmaModeNo = 0U, /*!< No DMA */ kSDHC_DmaModeAdma1 = 1U, /*!< ADMA1 is selected */ kSDHC_DmaModeAdma2 = 2U, /*!< ADMA2 is selected */ } sdhc_dma_mode_t; /*! @brief SDIO control flag mask */ enum _sdhc_sdio_control_flag { kSDHC_StopAtBlockGapFlag = 0x01, /*!< Stop at block gap */ kSDHC_ReadWaitControlFlag = 0x02, /*!< Read wait control */ kSDHC_InterruptAtBlockGapFlag = 0x04, /*!< Interrupt at block gap */ kSDHC_ExactBlockNumberReadFlag = 0x08, /*!< Exact block number read */ }; /*! @brief MMC card boot mode */ typedef enum _sdhc_boot_mode { kSDHC_BootModeNormal = 0U, /*!< Normal boot */ kSDHC_BootModeAlternative = 1U, /*!< Alternative boot */ } sdhc_boot_mode_t; /*! @brief The command type */ typedef enum _sdhc_command_type { kSDHC_CommandTypeNormal = 0U, /*!< Normal command */ kSDHC_CommandTypeSuspend = 1U, /*!< Suspend command */ kSDHC_CommandTypeResume = 2U, /*!< Resume command */ kSDHC_CommandTypeAbort = 3U, /*!< Abort command */ } sdhc_command_type_t; /*! * @brief The command response type. * * Define the command response type from card to host controller. */ typedef enum _sdhc_response_type { kSDHC_ResponseTypeNone = 0U, /*!< Response type: none */ kSDHC_ResponseTypeR1 = 1U, /*!< Response type: R1 */ kSDHC_ResponseTypeR1b = 2U, /*!< Response type: R1b */ kSDHC_ResponseTypeR2 = 3U, /*!< Response type: R2 */ kSDHC_ResponseTypeR3 = 4U, /*!< Response type: R3 */ kSDHC_ResponseTypeR4 = 5U, /*!< Response type: R4 */ kSDHC_ResponseTypeR5 = 6U, /*!< Response type: R5 */ kSDHC_ResponseTypeR5b = 7U, /*!< Response type: R5b */ kSDHC_ResponseTypeR6 = 8U, /*!< Response type: R6 */ kSDHC_ResponseTypeR7 = 9U, /*!< Response type: R7 */ } sdhc_response_type_t; /*! @brief The alignment size for ADDRESS filed in ADMA1's descriptor */ #define SDHC_ADMA1_ADDRESS_ALIGN (4096U) /*! @brief The alignment size for LENGTH field in ADMA1's descriptor */ #define SDHC_ADMA1_LENGTH_ALIGN (4096U) /*! @brief The alignment size for ADDRESS field in ADMA2's descriptor */ #define SDHC_ADMA2_ADDRESS_ALIGN (4U) /*! @brief The alignment size for LENGTH filed in ADMA2's descriptor */ #define SDHC_ADMA2_LENGTH_ALIGN (4U) /* ADMA1 descriptor table * |------------------------|---------|--------------------------| * | Address/page field |Reserved | Attribute | * |------------------------|---------|--------------------------| * |31 12|11 6|05 |04 |03|02 |01 |00 | * |------------------------|---------|----|----|--|---|---|-----| * | address or data length | 000000 |Act2|Act1| 0|Int|End|Valid| * |------------------------|---------|----|----|--|---|---|-----| * * * |------|------|-----------------|-------|-------------| * | Act2 | Act1 | Comment | 31-28 | 27 - 12 | * |------|------|-----------------|---------------------| * | 0 | 0 | No op | Don't care | * |------|------|-----------------|-------|-------------| * | 0 | 1 | Set data length | 0000 | Data Length | * |------|------|-----------------|-------|-------------| * | 1 | 0 | Transfer data | Data address | * |------|------|-----------------|---------------------| * | 1 | 1 | Link descriptor | Descriptor address | * |------|------|-----------------|---------------------| */ /*! @brief The bit shift for ADDRESS filed in ADMA1's descriptor */ #define SDHC_ADMA1_DESCRIPTOR_ADDRESS_SHIFT (12U) /*! @brief The bit mask for ADDRESS field in ADMA1's descriptor */ #define SDHC_ADMA1_DESCRIPTOR_ADDRESS_MASK (0xFFFFFU) /*! @brief The bit shift for LENGTH filed in ADMA1's descriptor */ #define SDHC_ADMA1_DESCRIPTOR_LENGTH_SHIFT (12U) /*! @brief The mask for LENGTH field in ADMA1's descriptor */ #define SDHC_ADMA1_DESCRIPTOR_LENGTH_MASK (0xFFFFU) /*! @brief The maximum value of LENGTH filed in ADMA1's descriptor */ #define SDHC_ADMA1_DESCRIPTOR_MAX_LENGTH_PER_ENTRY (SDHC_ADMA1_DESCRIPTOR_LENGTH_MASK + 1U) /*! @brief The mask for the control/status field in ADMA1 descriptor */ enum _sdhc_adma1_descriptor_flag { kSDHC_Adma1DescriptorValidFlag = (1U << 0U), /*!< Valid flag */ kSDHC_Adma1DescriptorEndFlag = (1U << 1U), /*!< End flag */ kSDHC_Adma1DescriptorInterrupFlag = (1U << 2U), /*!< Interrupt flag */ kSDHC_Adma1DescriptorActivity1Flag = (1U << 4U), /*!< Activity 1 flag */ kSDHC_Adma1DescriptorActivity2Flag = (1U << 5U), /*!< Activity 2 flag */ kSDHC_Adma1DescriptorTypeNop = (kSDHC_Adma1DescriptorValidFlag), /*!< No operation */ kSDHC_Adma1DescriptorTypeTransfer = (kSDHC_Adma1DescriptorActivity2Flag | kSDHC_Adma1DescriptorValidFlag), /*!< Transfer data */ kSDHC_Adma1DescriptorTypeLink = (kSDHC_Adma1DescriptorActivity1Flag | kSDHC_Adma1DescriptorActivity2Flag | kSDHC_Adma1DescriptorValidFlag), /*!< Link descriptor */ kSDHC_Adma1DescriptorTypeSetLength = (kSDHC_Adma1DescriptorActivity1Flag | kSDHC_Adma1DescriptorValidFlag), /*!< Set data length */ }; /* ADMA2 descriptor table * |----------------|---------------|-------------|--------------------------| * | Address field | Length | Reserved | Attribute | * |----------------|---------------|-------------|--------------------------| * |63 32|31 16|15 06|05 |04 |03|02 |01 |00 | * |----------------|---------------|-------------|----|----|--|---|---|-----| * | 32-bit address | 16-bit length | 0000000000 |Act2|Act1| 0|Int|End|Valid| * |----------------|---------------|-------------|----|----|--|---|---|-----| * * * | Act2 | Act1 | Comment | Operation | * |------|------|-----------------|-------------------------------------------------------------------| * | 0 | 0 | No op | Don't care | * |------|------|-----------------|-------------------------------------------------------------------| * | 0 | 1 | Reserved | Read this line and go to next one | * |------|------|-----------------|-------------------------------------------------------------------| * | 1 | 0 | Transfer data | Transfer data with address and length set in this descriptor line | * |------|------|-----------------|-------------------------------------------------------------------| * | 1 | 1 | Link descriptor | Link to another descriptor | * |------|------|-----------------|-------------------------------------------------------------------| */ /*! @brief The bit shift for LENGTH field in ADMA2's descriptor */ #define SDHC_ADMA2_DESCRIPTOR_LENGTH_SHIFT (16U) /*! @brief The bit mask for LENGTH field in ADMA2's descriptor */ #define SDHC_ADMA2_DESCRIPTOR_LENGTH_MASK (0xFFFFU) /*! @brief The maximum value of LENGTH field in ADMA2's descriptor */ #define SDHC_ADMA2_DESCRIPTOR_MAX_LENGTH_PER_ENTRY (SDHC_ADMA2_DESCRIPTOR_LENGTH_MASK) /*! @brief ADMA1 descriptor control and status mask */ enum _sdhc_adma2_descriptor_flag { kSDHC_Adma2DescriptorValidFlag = (1U << 0U), /*!< Valid flag */ kSDHC_Adma2DescriptorEndFlag = (1U << 1U), /*!< End flag */ kSDHC_Adma2DescriptorInterruptFlag = (1U << 2U), /*!< Interrupt flag */ kSDHC_Adma2DescriptorActivity1Flag = (1U << 4U), /*!< Activity 1 mask */ kSDHC_Adma2DescriptorActivity2Flag = (1U << 5U), /*!< Activity 2 mask */ kSDHC_Adma2DescriptorTypeNop = (kSDHC_Adma2DescriptorValidFlag), /*!< No operation */ kSDHC_Adma2DescriptorTypeReserved = (kSDHC_Adma2DescriptorActivity1Flag | kSDHC_Adma2DescriptorValidFlag), /*!< Reserved */ kSDHC_Adma2DescriptorTypeTransfer = (kSDHC_Adma2DescriptorActivity2Flag | kSDHC_Adma2DescriptorValidFlag), /*!< Transfer type */ kSDHC_Adma2DescriptorTypeLink = (kSDHC_Adma2DescriptorActivity1Flag | kSDHC_Adma2DescriptorActivity2Flag | kSDHC_Adma2DescriptorValidFlag), /*!< Link type */ }; /*! @brief Defines the adma1 descriptor structure. */ typedef uint32_t sdhc_adma1_descriptor_t; /*! @brief Defines the ADMA2 descriptor structure. */ typedef struct _sdhc_adma2_descriptor { uint32_t attribute; /*!< The control and status field */ const uint32_t *address; /*!< The address field */ } sdhc_adma2_descriptor_t; /*! * @brief SDHC capability information. * * Defines a structure to save the capability information of SDHC. */ typedef struct _sdhc_capability { uint32_t specVersion; /*!< Specification version */ uint32_t vendorVersion; /*!< Vendor version */ uint32_t maxBlockLength; /*!< Maximum block length united as byte */ uint32_t maxBlockCount; /*!< Maximum block count can be set one time */ uint32_t flags; /*!< Capability flags to indicate the support information(_sdhc_capability_flag) */ } sdhc_capability_t; /*! @brief Card transfer configuration. * * Define structure to configure the transfer-related command index/argument/flags and data block * size/data block numbers. This structure needs to be filled each time a command is sent to the card. */ typedef struct _sdhc_transfer_config { size_t dataBlockSize; /*!< Data block size */ uint32_t dataBlockCount; /*!< Data block count */ uint32_t commandArgument; /*!< Command argument */ uint32_t commandIndex; /*!< Command index */ uint32_t flags; /*!< Transfer flags(_sdhc_transfer_flag) */ } sdhc_transfer_config_t; /*! @brief Data structure to configure the MMC boot feature */ typedef struct _sdhc_boot_config { uint32_t ackTimeoutCount; /*!< Timeout value for the boot ACK. The available range is 0 ~ 15. */ sdhc_boot_mode_t bootMode; /*!< Boot mode selection. */ uint32_t blockCount; /*!< Stop at block gap value of automatic mode. Available range is 0 ~ 65535. */ bool enableBootAck; /*!< Enable or disable boot ACK */ bool enableBoot; /*!< Enable or disable fast boot */ bool enableAutoStopAtBlockGap; /*!< Enable or disable auto stop at block gap function in boot period */ } sdhc_boot_config_t; /*! @brief Data structure to initialize the SDHC */ typedef struct _sdhc_config { bool cardDetectDat3; /*!< Enable DAT3 as card detection pin */ sdhc_endian_mode_t endianMode; /*!< Endian mode */ sdhc_dma_mode_t dmaMode; /*!< DMA mode */ uint32_t readWatermarkLevel; /*!< Watermark level for DMA read operation. Available range is 1 ~ 128. */ uint32_t writeWatermarkLevel; /*!< Watermark level for DMA write operation. Available range is 1 ~ 128. */ } sdhc_config_t; /*! * @brief Card data descriptor * * Defines a structure to contain data-related attribute. 'enableIgnoreError' is used for the case that upper card * driver * want to ignore the error event to read/write all the data not to stop read/write immediately when error event * happen for example bus testing procedure for MMC card. */ typedef struct _sdhc_data { bool enableAutoCommand12; /*!< Enable auto CMD12 */ bool enableIgnoreError; /*!< Enable to ignore error event to read/write all the data */ size_t blockSize; /*!< Block size */ uint32_t blockCount; /*!< Block count */ uint32_t *rxData; /*!< Buffer to save data read */ const uint32_t *txData; /*!< Data buffer to write */ } sdhc_data_t; /*! * @brief Card command descriptor * * Define card command-related attribute. */ typedef struct _sdhc_command { uint32_t index; /*!< Command index */ uint32_t argument; /*!< Command argument */ sdhc_command_type_t type; /*!< Command type */ sdhc_response_type_t responseType; /*!< Command response type */ uint32_t response[4U]; /*!< Response for this command */ } sdhc_command_t; /*! @brief Transfer state */ typedef struct _sdhc_transfer { sdhc_data_t *data; /*!< Data to transfer */ sdhc_command_t *command; /*!< Command to send */ } sdhc_transfer_t; /*! @brief SDHC handle typedef */ typedef struct _sdhc_handle sdhc_handle_t; /*! @brief SDHC callback functions. */ typedef struct _sdhc_transfer_callback { void (*CardInserted)(void); /*!< Card inserted occurs when DAT3/CD pin is for card detect */ void (*CardRemoved)(void); /*!< Card removed occurs */ void (*SdioInterrupt)(void); /*!< SDIO card interrupt occurs */ void (*SdioBlockGap)(void); /*!< SDIO card stopped at block gap occurs */ void (*TransferComplete)(SDHC_Type *base, sdhc_handle_t *handle, status_t status, void *userData); /*!< Transfer complete callback */ } sdhc_transfer_callback_t; /*! * @brief SDHC handle * * Defines the structure to save the SDHC state information and callback function. The detailed interrupt status when * sending a command or transfering data can be obtained from the interruptFlags field by using the mask defined in * sdhc_interrupt_flag_t. * * @note All the fields except interruptFlags and transferredWords must be allocated by the user. */ struct _sdhc_handle { /* Transfer parameter */ sdhc_data_t *volatile data; /*!< Data to transfer */ sdhc_command_t *volatile command; /*!< Command to send */ /* Transfer status */ volatile uint32_t interruptFlags; /*!< Interrupt flags of last transaction */ volatile uint32_t transferredWords; /*!< Words transferred by DATAPORT way */ /* Callback functions */ sdhc_transfer_callback_t callback; /*!< Callback function */ void *userData; /*!< Parameter for transfer complete callback */ }; /*! @brief SDHC transfer function. */ typedef status_t (*sdhc_transfer_function_t)(SDHC_Type *base, sdhc_transfer_t *content); /*! @brief SDHC host descriptor */ typedef struct _sdhc_host { SDHC_Type *base; /*!< SDHC peripheral base address */ uint32_t sourceClock_Hz; /*!< SDHC source clock frequency united in Hz */ sdhc_config_t config; /*!< SDHC configuration */ sdhc_capability_t capability; /*!< SDHC capability information */ sdhc_transfer_function_t transfer; /*!< SDHC transfer function */ } sdhc_host_t; /************************************************************************************************* * API ************************************************************************************************/ #if defined(__cplusplus) extern "C" { #endif /*! * @name Initialization and deinitialization * @{ */ /*! * @brief SDHC module initialization function. * * Configures the SDHC according to the user configuration. * * Example: @code sdhc_config_t config; config.cardDetectDat3 = false; config.endianMode = kSDHC_EndianModeLittle; config.dmaMode = kSDHC_DmaModeAdma2; config.readWatermarkLevel = 128U; config.writeWatermarkLevel = 128U; SDHC_Init(SDHC, &config); @endcode * * @param base SDHC peripheral base address. * @param config SDHC configuration information. * @retval kStatus_Success Operate successfully. */ void SDHC_Init(SDHC_Type *base, const sdhc_config_t *config); /*! * @brief Deinitializes the SDHC. * * @param base SDHC peripheral base address. */ void SDHC_Deinit(SDHC_Type *base); /*! * @brief Resets the SDHC. * * @param base SDHC peripheral base address. * @param mask The reset type mask(_sdhc_reset). * @param timeout Timeout for reset. * @retval true Reset successfully. * @retval false Reset failed. */ bool SDHC_Reset(SDHC_Type *base, uint32_t mask, uint32_t timeout); /* @} */ /*! * @name DMA Control * @{ */ /*! * @brief Sets the ADMA descriptor table configuration. * * @param base SDHC peripheral base address. * @param dmaMode DMA mode. * @param table ADMA table address. * @param tableWords ADMA table buffer length united as Words. * @param data Data buffer address. * @param dataBytes Data length united as bytes. * @retval kStatus_OutOfRange ADMA descriptor table length isn't enough to describe data. * @retval kStatus_Success Operate successfully. */ status_t SDHC_SetAdmaTableConfig(SDHC_Type *base, sdhc_dma_mode_t dmaMode, uint32_t *table, uint32_t tableWords, const uint32_t *data, uint32_t dataBytes); /* @} */ /*! * @name Interrupts * @{ */ /*! * @brief Enables the interrupt status. * * @param base SDHC peripheral base address. * @param mask Interrupt status flags mask(_sdhc_interrupt_status_flag). */ static inline void SDHC_EnableInterruptStatus(SDHC_Type *base, uint32_t mask) { base->IRQSTATEN |= mask; } /*! * @brief Disables the interrupt status. * * @param base SDHC peripheral base address. * @param mask The interrupt status flags mask(_sdhc_interrupt_status_flag). */ static inline void SDHC_DisableInterruptStatus(SDHC_Type *base, uint32_t mask) { base->IRQSTATEN &= ~mask; } /*! * @brief Enables the interrupt signal corresponding to the interrupt status flag. * * @param base SDHC peripheral base address. * @param mask The interrupt status flags mask(_sdhc_interrupt_status_flag). */ static inline void SDHC_EnableInterruptSignal(SDHC_Type *base, uint32_t mask) { base->IRQSIGEN |= mask; } /*! * @brief Disables the interrupt signal corresponding to the interrupt status flag. * * @param base SDHC peripheral base address. * @param mask The interrupt status flags mask(_sdhc_interrupt_status_flag). */ static inline void SDHC_DisableInterruptSignal(SDHC_Type *base, uint32_t mask) { base->IRQSIGEN &= ~mask; } /* @} */ /*! * @name Status * @{ */ /*! * @brief Gets the current interrupt status. * * @param base SDHC peripheral base address. * @return Current interrupt status flags mask(_sdhc_interrupt_status_flag). */ static inline uint32_t SDHC_GetInterruptStatusFlags(SDHC_Type *base) { return base->IRQSTAT; } /*! * @brief Clears a specified interrupt status. * * @param base SDHC peripheral base address. * @param mask The interrupt status flags mask(_sdhc_interrupt_status_flag). */ static inline void SDHC_ClearInterruptStatusFlags(SDHC_Type *base, uint32_t mask) { base->IRQSTAT = mask; } /*! * @brief Gets the status of auto command 12 error. * * @param base SDHC peripheral base address. * @return Auto command 12 error status flags mask(_sdhc_auto_command12_error_status_flag). */ static inline uint32_t SDHC_GetAutoCommand12ErrorStatusFlags(SDHC_Type *base) { return base->AC12ERR; } /*! * @brief Gets the status of the ADMA error. * * @param base SDHC peripheral base address. * @return ADMA error status flags mask(_sdhc_adma_error_status_flag). */ static inline uint32_t SDHC_GetAdmaErrorStatusFlags(SDHC_Type *base) { return base->ADMAES; } /*! * @brief Gets a present status. * * This function gets the present SDHC's status except for an interrupt status and an error status. * * @param base SDHC peripheral base address. * @return Present SDHC's status flags mask(_sdhc_present_status_flag). */ static inline uint32_t SDHC_GetPresentStatusFlags(SDHC_Type *base) { return base->PRSSTAT; } /* @} */ /*! * @name Bus Operations * @{ */ /*! * @brief Gets the capability information. * * @param base SDHC peripheral base address. * @param capability Structure to save capability information. */ void SDHC_GetCapability(SDHC_Type *base, sdhc_capability_t *capability); /*! * @brief Enables or disables the SD bus clock. * * @param base SDHC peripheral base address. * @param enable True to enable, false to disable. */ static inline void SDHC_EnableSdClock(SDHC_Type *base, bool enable) { if (enable) { base->SYSCTL |= SDHC_SYSCTL_SDCLKEN_MASK; } else { base->SYSCTL &= ~SDHC_SYSCTL_SDCLKEN_MASK; } } /*! * @brief Sets the SD bus clock frequency. * * @param base SDHC peripheral base address. * @param srcClock_Hz SDHC source clock frequency united in Hz. * @param busClock_Hz SD bus clock frequency united in Hz. * * @return The nearest frequency of busClock_Hz configured to SD bus. */ uint32_t SDHC_SetSdClock(SDHC_Type *base, uint32_t srcClock_Hz, uint32_t busClock_Hz); /*! * @brief Sends 80 clocks to the card to set it to the active state. * * This function must be called each time the card is inserted to ensure that the card can receive the command * correctly. * * @param base SDHC peripheral base address. * @param timeout Timeout to initialize card. * @retval true Set card active successfully. * @retval false Set card active failed. */ bool SDHC_SetCardActive(SDHC_Type *base, uint32_t timeout); /*! * @brief Sets the data transfer width. * * @param base SDHC peripheral base address. * @param width Data transfer width. */ static inline void SDHC_SetDataBusWidth(SDHC_Type *base, sdhc_data_bus_width_t width) { base->PROCTL = ((base->PROCTL & ~SDHC_PROCTL_DTW_MASK) | SDHC_PROCTL_DTW(width)); } /*! * @brief Sets the card transfer-related configuration. * * This function fills the card transfer-related command argument/transfer flag/data size. The command and data are sent by * SDHC after calling this function. * * Example: @code sdhc_transfer_config_t transferConfig; transferConfig.dataBlockSize = 512U; transferConfig.dataBlockCount = 2U; transferConfig.commandArgument = 0x01AAU; transferConfig.commandIndex = 8U; transferConfig.flags |= (kSDHC_EnableDmaFlag | kSDHC_EnableAutoCommand12Flag | kSDHC_MultipleBlockFlag); SDHC_SetTransferConfig(SDHC, &transferConfig); @endcode * * @param base SDHC peripheral base address. * @param config Command configuration structure. */ void SDHC_SetTransferConfig(SDHC_Type *base, const sdhc_transfer_config_t *config); /*! * @brief Gets the command response. * * @param base SDHC peripheral base address. * @param index The index of response register, range from 0 to 3. * @return Response register transfer. */ static inline uint32_t SDHC_GetCommandResponse(SDHC_Type *base, uint32_t index) { assert(index < 4U); return base->CMDRSP[index]; } /*! * @brief Fills the the data port. * * This function is used to implement the data transfer by Data Port instead of DMA. * * @param base SDHC peripheral base address. * @param data The data about to be sent. */ static inline void SDHC_WriteData(SDHC_Type *base, uint32_t data) { base->DATPORT = data; } /*! * @brief Retrieves the data from the data port. * * This function is used to implement the data transfer by Data Port instead of DMA. * * @param base SDHC peripheral base address. * @return The data has been read. */ static inline uint32_t SDHC_ReadData(SDHC_Type *base) { return base->DATPORT; } /*! * @brief Enables or disables a wakeup event in low-power mode. * * @param base SDHC peripheral base address. * @param mask Wakeup events mask(_sdhc_wakeup_event). * @param enable True to enable, false to disable. */ static inline void SDHC_EnableWakeupEvent(SDHC_Type *base, uint32_t mask, bool enable) { if (enable) { base->PROCTL |= mask; } else { base->PROCTL &= ~mask; } } /*! * @brief Enables or disables the card detection level for testing. * * @param base SDHC peripheral base address. * @param enable True to enable, false to disable. */ static inline void SDHC_EnableCardDetectTest(SDHC_Type *base, bool enable) { if (enable) { base->PROCTL |= SDHC_PROCTL_CDSS_MASK; } else { base->PROCTL &= ~SDHC_PROCTL_CDSS_MASK; } } /*! * @brief Sets the card detection test level. * * This function sets the card detection test level to indicate whether the card is inserted into the SDHC when DAT[3]/ * CD pin is selected as a card detection pin. This function can also assert the pin logic when DAT[3]/CD pin is * selected * as the card detection pin. * * @param base SDHC peripheral base address. * @param high True to set the card detect level to high. */ static inline void SDHC_SetCardDetectTestLevel(SDHC_Type *base, bool high) { if (high) { base->PROCTL |= SDHC_PROCTL_CDTL_MASK; } else { base->PROCTL &= ~SDHC_PROCTL_CDTL_MASK; } } /*! * @brief Enables or disables the SDIO card control. * * @param base SDHC peripheral base address. * @param mask SDIO card control flags mask(_sdhc_sdio_control_flag). * @param enable True to enable, false to disable. */ void SDHC_EnableSdioControl(SDHC_Type *base, uint32_t mask, bool enable); /*! * @brief Restarts a transaction which has stopped at the block GAP for the SDIO card. * * @param base SDHC peripheral base address. */ static inline void SDHC_SetContinueRequest(SDHC_Type *base) { base->PROCTL |= SDHC_PROCTL_CREQ_MASK; } /*! * @brief Configures the MMC boot feature. * * Example: @code sdhc_boot_config_t config; config.ackTimeoutCount = 4; config.bootMode = kSDHC_BootModeNormal; config.blockCount = 5; config.enableBootAck = true; config.enableBoot = true; config.enableAutoStopAtBlockGap = true; SDHC_SetMmcBootConfig(SDHC, &config); @endcode * * @param base SDHC peripheral base address. * @param config The MMC boot configuration information. */ void SDHC_SetMmcBootConfig(SDHC_Type *base, const sdhc_boot_config_t *config); /*! * @brief Forces generating events according to the given mask. * * @param base SDHC peripheral base address. * @param mask The force events mask(_sdhc_force_event). */ static inline void SDHC_SetForceEvent(SDHC_Type *base, uint32_t mask) { base->FEVT = mask; } /* @} */ /*! * @name Transactional * @{ */ /*! * @brief Transfers the command/data using a blocking method. * * This function waits until the command response/data is received or the SDHC encounters an error by polling the status * flag. * The application must not call this API in multiple threads at the same time. Because of that this API doesn't support * the re-entry mechanism. * * @note There is no need to call the API 'SDHC_TransferCreateHandle' when calling this API. * * @param base SDHC peripheral base address. * @param admaTable ADMA table address, can't be null if transfer way is ADMA1/ADMA2. * @param admaTableWords ADMA table length united as words, can't be 0 if transfer way is ADMA1/ADMA2. * @param transfer Transfer content. * @retval kStatus_InvalidArgument Argument is invalid. * @retval kStatus_SDHC_PrepareAdmaDescriptorFailed Prepare ADMA descriptor failed. * @retval kStatus_SDHC_SendCommandFailed Send command failed. * @retval kStatus_SDHC_TransferDataFailed Transfer data failed. * @retval kStatus_Success Operate successfully. */ status_t SDHC_TransferBlocking(SDHC_Type *base, uint32_t *admaTable, uint32_t admaTableWords, sdhc_transfer_t *transfer); /*! * @brief Creates the SDHC handle. * * @param base SDHC peripheral base address. * @param handle SDHC handle pointer. * @param callback Structure pointer to contain all callback functions. * @param userData Callback function parameter. */ void SDHC_TransferCreateHandle(SDHC_Type *base, sdhc_handle_t *handle, const sdhc_transfer_callback_t *callback, void *userData); /*! * @brief Transfers the command/data using an interrupt and an asynchronous method. * * This function sends a command and data and returns immediately. It doesn't wait the transfer complete or encounter an * error. * The application must not call this API in multiple threads at the same time. Because of that this API doesn't support * the re-entry mechanism. * * @note Call the API 'SDHC_TransferCreateHandle' when calling this API. * * @param base SDHC peripheral base address. * @param handle SDHC handle. * @param admaTable ADMA table address, can't be null if transfer way is ADMA1/ADMA2. * @param admaTableWords ADMA table length united as words, can't be 0 if transfer way is ADMA1/ADMA2. * @param transfer Transfer content. * @retval kStatus_InvalidArgument Argument is invalid. * @retval kStatus_SDHC_BusyTransferring Busy transferring. * @retval kStatus_SDHC_PrepareAdmaDescriptorFailed Prepare ADMA descriptor failed. * @retval kStatus_Success Operate successfully. */ status_t SDHC_TransferNonBlocking( SDHC_Type *base, sdhc_handle_t *handle, uint32_t *admaTable, uint32_t admaTableWords, sdhc_transfer_t *transfer); /*! * @brief IRQ handler for the SDHC. * * This function deals with the IRQs on the given host controller. * * @param base SDHC peripheral base address. * @param handle SDHC handle. */ void SDHC_TransferHandleIRQ(SDHC_Type *base, sdhc_handle_t *handle); /* @} */ #if defined(__cplusplus) } #endif /*! @} */ #endif /* _FSL_SDHC_H_*/