Diff: main.cpp

Revision:

0:bfb567985c64

Child:

2:4bc4e25328cc

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/main.cpp	Fri Jul 25 12:16:13 2014 +0000
@@ -0,0 +1,149 @@
+/* Copyright (c) 2010-2011 mbed.org, MIT License
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy of this software
+* and associated documentation files (the "Software"), to deal in the Software without
+* restriction, including without limitation the rights to use, copy, modify, merge, publish,
+* distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the
+* Software is furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in all copies or
+* substantial portions of the Software.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING
+* BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
+* DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+*/
+
+#include "mbed.h"
+#include "MAG3110.h"
+#include "FXOS8700Q.h"
+#include "MMA8652.h"
+#include "FXLS8471Q.h"
+#include "FXAS21000.h"
+
+// Requires a Freescale-compatible platform. Comment if you're getting weird results for the alt or any other sensor. Also check the interrupt params below.
+#define FSL_COMPATIBLE
+#if defined(FSL_COMPATIBLE)
+    #define MPL3115A2_I2C_ADDRESS (0x60<<1)
+    #include "MPL3115A2.h" 
+    
+    MPL3115A2 alt(D14, D15, MPL3115A2_I2C_ADDRESS, D4, D3);
+#endif
+
+FXLS8471Q acc1(D11, D12, D13, D10);
+MMA8652   acc2(D14, D15);
+FXOS8700Q_acc combo_acc(D14, D15, FXOS8700CQ_SLAVE_ADDR0);
+FXOS8700Q_mag combo_mag(D14, D15, FXOS8700CQ_SLAVE_ADDR0);
+MAG3110   mag2(D14, D15);
+FXAS21000 gyro(D14, D15);
+
+
+Serial pc(USBTX, USBRX);
+
+float print_AltimiterValue( unsigned char *dt)
+{
+    unsigned short altm;
+    float faltm;
+
+    /*
+    * dt[0] = Bits 12-19 of 20-bit real-time Altitude sample. (b7-b0)
+    * dt[1] = Bits 4-11 of 20-bit real-time Altitude sample. (b7-b0)
+    * dt[2] = Bits 0-3 of 20-bit real-time Altitude sample (b7-b4)
+    */
+    altm = (dt[0]<<8) | dt[1];
+    //
+    if ( dt[0] > 0x7F) {
+        altm = ~altm + 1;
+        faltm = (float)altm * -1.0f;
+    } else {
+        faltm = (float)altm * 1.0f;
+    }
+    //
+    faltm = faltm+((float)(dt[2]>>4) * 0.0625f);
+    return faltm;
+}
+
+float print_TemperatureValue( unsigned char *dt)
+{
+    unsigned short temp;
+    float ftemp;
+
+    /*
+    * dt[0] = Bits 4-11 of 16-bit real-time temperature sample. (b7-b0)
+    * dt[1] = Bits 0-3 of 16-bit real-time temperature sample. (b7-b4)
+    */
+    temp = dt[0];
+    //
+    if ( dt[0] > 0x7F) {
+        temp = ~temp + 1;
+        ftemp = (float)temp * -1.0f;
+    } else {
+        ftemp = (float)temp * 1.0f;
+    }
+    //
+    ftemp = ftemp+((float)(dt[1]>>4) * 0.0625f);
+    return ftemp;
+
+}
+
+
+int main()
+{
+    float acc_data[3], gyro_data[3];
+    MotionSensorDataUnits adata;
+    MotionSensorDataUnits mdata;
+    int16_t acc_raw[3];
+
+    printf("\r\nStarting\r\n\r\n");
+
+    combo_acc.enable();
+    combo_mag.enable();
+    mag2.enable();
+    printf("FXLS8471 Acc   = %X\r\n", acc1.getWhoAmI());
+    printf("MMA8652 Acc    = %X\r\n", acc2.getWhoAmI());
+    printf("FXOS8700 Combo = %X\r\n", combo_acc.whoAmI());
+    printf("MAG3110 Mag    = %X\r\n", mag2.whoAmI());
+    printf("FXAS21000 Gyro = %X\r\n", gyro.getWhoAmI());
+    
+    #if defined(FSL_COMPATIBLE)
+        unsigned char alt_data[8];
+        alt.Altimeter_Mode();
+        printf("MPL3115A2 Alt  = %X\r\n", alt.getDeviceID());  // May only be used on a Freescale platform, comment out for others
+    #endif
+    
+    wait(3);
+    
+    while(1) {
+        acc1.ReadXYZ(acc_data);
+        acc1.ReadXYZraw(acc_raw);
+        printf("FXLS8471 Acc:   X:%6.3f Y:%6.3f Z:%6.3f (Raw X:%4d Y:%4d Z:%4d)\r\n", acc_data[0], acc_data[1], acc_data[2], acc_raw[0], acc_raw[1], acc_raw[2]);
+
+        acc2.ReadXYZ(acc_data);
+        acc2.ReadXYZraw(acc_raw);
+        printf("MMA8652 Acc:    X:%6.3f Y:%6.3f Z:%6.3f (Raw X:%4d Y:%4d Z:%4d)\r\n", acc_data[0], acc_data[1], acc_data[2], acc_raw[0], acc_raw[1], acc_raw[2]);
+
+        combo_acc.getAxis(adata);
+        printf("FXOS8700 Acc:   X:%6.3f Y:%6.3f Z:%6.3f\r\n", adata.x, adata.y, adata.z);
+        
+        combo_mag.getAxis(mdata);
+        printf("FXOS8700 Mag:   X:%6.2f Y:%6.2f Z:%6.2f\r\n", mdata.x, mdata.y, mdata.z);
+
+        mag2.getAxis(mdata);
+        printf("MAG3110 Mag:    X:%6.2f Y:%6.2f Z:%6.2f\r\n", mdata.x, mdata.y, mdata.z);
+
+        gyro.ReadXYZ(gyro_data);
+        printf("FXAS21000 Gyro: X:%6.2f Y:%6.2f Z:%6.2f\r\n", gyro_data[0], gyro_data[1], gyro_data[2]);
+        
+        #if defined(FSL_COMPATIBLE)
+            alt.getAllDataRaw(&alt_data[0]);  // May only be used on a Freescale platform, comment out for others
+            printf("MPL3115A2 Alt:  %5.1f\r\n", print_AltimiterValue(&alt_data[0]));  // May only be used on a Freescale platform, comment out for others
+            printf("MPL3115A2 Temp: %3.1f\r\n", print_TemperatureValue(&alt_data[3]));  // May only be used on a Freescale platform, comment out for others
+        #endif
+
+        printf("\r\n");
+        
+        wait(1);
+    }
+}