![](/media/cache/img/default_profile.jpg.50x50_q85.jpg)
Changed to work with St Board
Dependencies: BLE_API X_NUCLEO_IDB0XA1 mbed
Fork of BLE_URIBeacon by
Diff: main.cpp
- Revision:
- 6:31b65d4ea67d
- Parent:
- 3:1d2526788eaa
- Child:
- 7:6faec5978fb4
--- a/main.cpp Wed Nov 05 14:24:53 2014 +0000 +++ b/main.cpp Fri Nov 28 14:21:41 2014 +0000 @@ -16,31 +16,34 @@ #include "mbed.h" #include "BLEDevice.h" +#include "URIBeacon2Service.h" +#include "DFUService.h" +#include "DeviceInformationService.h" BLEDevice ble; -static const uint8_t BEACON_UUID[] = {0xD8, 0xFE}; -uint8_t urldata[] = { - BEACON_UUID[0], BEACON_UUID[1], - 0x00, // flags - 0x20, // power - 0x02, // http:// - 'm', - 'b', - 'e', - 'd', - 0x08, // .".org" -}; +void disconnectionCallback(Gap::Handle_t handle, Gap::DisconnectionReason_t reason) +{ + ble.startAdvertising(); +} int main(void) { ble.init(); + ble.onDisconnection(disconnectionCallback); - ble.accumulateAdvertisingPayload(GapAdvertisingData::COMPLETE_LIST_16BIT_SERVICE_IDS, BEACON_UUID, sizeof(BEACON_UUID)); - ble.accumulateAdvertisingPayload(GapAdvertisingData::SERVICE_DATA, urldata, sizeof(urldata)); + URIBeacon2Service uriBeacon(ble, "http://developer.mbed.org"); + if (!uriBeacon.configuredSuccessfully()) { + error("failed to accommodate URI"); + } + /* optional use of the API offered by URIBeacon2Service */ + uriBeacon.setTxPowerLevel(URIBeacon2Service::TX_POWER_MODE_LOW, -4); + uriBeacon.useTxPowerMode(URIBeacon2Service::TX_POWER_MODE_LOW); - ble.setAdvertisingType(GapAdvertisingParams::ADV_NON_CONNECTABLE_UNDIRECTED); - ble.setAdvertisingInterval(1600); /* 1s; in multiples of 0.625ms. */ + /* Setup auxiliary services. */ + DFUService dfu(ble); /* To allow over-the-air firmware udpates. optional. */ + DeviceInformationService deviceInfo(ble, "ARM", "URIBeacon2", "SN1", "hw-rev1", "fw-rev1", "soft-rev1"); /* optional */ + ble.startAdvertising(); while (true) {