Test for central Device A iBeacon
Dependencies: BLE_API mbed nRF51822
Revision 0:c9040e9dbeac, committed 2015-07-20
- Comitter:
- jslater8
- Date:
- Mon Jul 20 13:46:24 2015 +0000
- Commit message:
- almost finished
Changed in this revision
diff -r 000000000000 -r c9040e9dbeac BLE_API.lib --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/BLE_API.lib Mon Jul 20 13:46:24 2015 +0000 @@ -0,0 +1,1 @@ +http://mbed.org/teams/Bluetooth-Low-Energy/code/BLE_API/#9c2edf20ea56
diff -r 000000000000 -r c9040e9dbeac main.cpp --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/main.cpp Mon Jul 20 13:46:24 2015 +0000 @@ -0,0 +1,179 @@ +/* mbed Microcontroller Library + * Copyright (c) 2006-2013 ARM Limited + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#include "mbed.h" +#include "iBeaconService.h" + +#define BLE_CHECK(X) (X == BLE_ERROR_NONE) ? (printf("{{success}}\r\n")) : printf("{{failure}} %s at line %u ERROR CODE: %u\r\n", #X, __LINE__, (X)); +#define BLE_EQUAL(X,Y) ((X)==(Y)) ? (printf("{{sucess}}\n")) : printf("{{failure}}\n"); + +/** + * For this demo application, populate the beacon advertisement payload + * with 2 AD structures: FLAG and MSD (manufacturer specific data). + * + * Reference: + * Bluetooth Core Specification 4.0 (Vol. 3), Part C, Section 11, 18 + */ + +BLE ble; +Ticker tick; +DigitalOut myled(LED1); +/** + * The Beacon payload has the following composition: + * 128-Bit / 16byte UUID = E2 0A 39 F4 73 F5 4B C4 A1 2F 17 D1 AD 07 A9 61 + * Major/Minor = 0x1122 / 0x3344 + * Tx Power = 0xC8 = 200, 2's compliment is 256-200 = (-56dB) + * + * Note: please remember to calibrate your beacons + * TX Power for more accurate results. + */ +const uint8_t uuid[] = {0xE2, 0x0A, 0x39, 0xF4, 0x73, 0xF5, 0x4B, 0xC4, + 0xA1, 0x2F, 0x17, 0xD1, 0xAD, 0x07, 0xA9, 0x61 + }; +uint16_t majorNumber = 1122; +uint16_t minorNumber = 3344; +uint16_t txPower = 0xC8; + +Gap::AddressType_t addressType; +Gap::Address_t address; +Gap::Address_t addrTest = {110,100,100,100,100,100}; +const static char DEVICE_NAME[] = "IBEACONTEST"; +Gap::GapState_t state; + +void changeAdvPay(void); +void changeScanRes(void); +/** +* Test to change advertisement interval +*/ +void changeAdvTime(void){ + tick.detach(); + BLE_CHECK(ble.gap().stopAdvertising()); + ble.gap().setAdvertisingTimeout(0); + ble.gap().setAdvertisingInterval(500); + BLE_CHECK(ble.gap().startAdvertising()); +} +/** +* Test to change advertisement payload +*/ +void changeAdvPay(void){ + tick.detach(); + BLE_CHECK(ble.gap().stopAdvertising()); + ble.gap().clearAdvertisingPayload(); + ble.gap().setAdvertisingTimeout(0); + BLE_CHECK(ble.gap().accumulateAdvertisingPayload(GapAdvertisingData::LE_GENERAL_DISCOVERABLE | GapAdvertisingData::BREDR_NOT_SUPPORTED)); + BLE_CHECK(ble.gap().accumulateAdvertisingPayload(GapAdvertisingData::OUTDOOR_GENERIC)); + BLE_CHECK(ble.gap().accumulateAdvertisingPayloadTxPower(10)); + uint8_t data[5] = {123,123,123,123,123}; + BLE_CHECK(ble.gap().accumulateAdvertisingPayload(GapAdvertisingData::SERVICE_DATA, data, 5)); + //BLE_CHECK(ble.gap().accumulateAdvertisingPayload(GapAdvertisingData::COMPLETE_LOCAL_NAME, (uint8_t *)DEVICE_NAME, sizeof(DEVICE_NAME))); + ble.gap().setAdvertisingInterval(500); + BLE_CHECK(ble.gap().startAdvertising()); +} +/** +* Test to change add a scan response +*/ +void changeScanRes(void){ + tick.detach(); + BLE_CHECK(ble.gap().stopAdvertising()); + ble.gap().clearAdvertisingPayload(); + ble.gap().clearScanResponse(); + ble.gap().setAdvertisingTimeout(0); + ble.setAdvertisingType(GapAdvertisingParams::ADV_SCANNABLE_UNDIRECTED); + uint8_t data2[5] = {50,50,50,50,50}; + BLE_CHECK(ble.gap().accumulateAdvertisingPayload(GapAdvertisingData::SERVICE_DATA, data2, sizeof(data2))); + uint8_t data[5] = {50,50,50,50,50}; + BLE_CHECK(ble.gap().accumulateScanResponse(GapAdvertisingData::SERVICE_DATA, data, sizeof(data))); + ble.gap().setAdvertisingInterval(500); + BLE_CHECK(ble.gap().startAdvertising()); +} +/** +* Test to change advertisement timeout +*/ +void timeoutTest(void){ + BLE_CHECK(ble.gap().stopAdvertising()); + ble.gap().clearAdvertisingPayload(); + ble.gap().clearScanResponse(); + ble.gap().setAdvertisingTimeout(5); + BLE_CHECK(ble.gap().startAdvertising()); +} +/** +* Reset function run after every test +*/ +void reset(void){ + tick.detach(); + ble.gap().stopAdvertising(); + ble.gap().clearAdvertisingPayload(); + ble.gap().clearScanResponse(); + ble.gap().setAdvertisingTimeout(0); + ble.gap().setAdvertisingInterval(1000); + uint8_t data2[5] = {0,0,0,0,0}; + ble.gap().accumulateAdvertisingPayload(GapAdvertisingData::SERVICE_DATA, data2, sizeof(data2)); + BLE_CHECK(ble.gap().startAdvertising()); +} +/** +* Controls which tests are run from input from PC +*/ +void testCentre(void){ + int x; + scanf("%d" , &x); + printf("%d:%d:%d:%d:%d:%d\n", address[0], address[1], address[2], address[3], address[4], address[5]); + GapAdvertisingData testData = ble.gap().getAdvertisingPayload(); + state = ble.gap().getState(); + !(testData.getPayload()) ? printf("{{failure}} ble.gap().getAdvertisingPayload() at line %u\r\n", __LINE__) : printf("{{success}}\r\n"); + (state.connected == 1 || state.advertising == 0) ? printf("{{failure}} ble.gap().getState() at line %u\r\n", __LINE__) : printf("{{success}}\r\n"); + while(true){ + scanf("%d", &x); + switch (x){ + case 0: + changeAdvTime(); + break; + case 1: + changeAdvPay(); + break; + case 2: + timeoutTest(); + break; + case 3: + changeScanRes(); + break; + default: + return; + } + scanf("%d", &x); + reset(); + } +} + +int main(void) +{ + myled = 0; + + BLE_CHECK(ble.init()); + + iBeaconService ibeacon(ble, uuid, majorNumber, minorNumber, txPower); + + ble.gap().setAdvertisingInterval(1000); /* 1000ms. */ + ble.gap().setAdvertisingTimeout(0); + + BLE_CHECK(ble.gap().setAddress(Gap::ADDR_TYPE_PUBLIC, addrTest)); + BLE_CHECK(ble.gap().getAddress(&addressType, address)); + BLE_CHECK(ble.gap().startAdvertising()); + + GapAdvertisingData testData = ble.gap().getAdvertisingPayload(); + + printf("{{success}}" "\n" "{{end}}" "\n"); //tells mbedhtrun to finish + testCentre(); +}
diff -r 000000000000 -r c9040e9dbeac mbed.bld --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/mbed.bld Mon Jul 20 13:46:24 2015 +0000 @@ -0,0 +1,1 @@ +http://mbed.org/users/mbed_official/code/mbed/builds/7cff1c4259d7 \ No newline at end of file
diff -r 000000000000 -r c9040e9dbeac nRF51822.lib --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/nRF51822.lib Mon Jul 20 13:46:24 2015 +0000 @@ -0,0 +1,1 @@ +http://mbed.org/teams/Nordic-Semiconductor/code/nRF51822/#6c82f06746bb