Changed URIBeaconConfigService.h to work with ST board

Fork of BLE_API by Bluetooth Low Energy

Committer:
rgrover1
Date:
Tue Jul 21 13:25:39 2015 +0100
Revision:
752:424c2ae44553
Parent:
751:868b6dd7a6bf
Synchronized with git rev 5eda1ad9
Author: Rohit Grover
make signature of BLE::onRadioNotification() more explicit.

void onRadioNotification(void (*callback)(bool))
This then is extended in Gap.h by:

template <typename T>
void onRadioNotification(T *tptr, void (T::*mptr)(bool));

Who changed what in which revision?

UserRevisionLine numberNew contents of line
rgrover1 716:11b41f651697 1 /* mbed Microcontroller Library
rgrover1 716:11b41f651697 2 * Copyright (c) 2006-2013 ARM Limited
rgrover1 716:11b41f651697 3 *
rgrover1 716:11b41f651697 4 * Licensed under the Apache License, Version 2.0 (the "License");
rgrover1 716:11b41f651697 5 * you may not use this file except in compliance with the License.
rgrover1 716:11b41f651697 6 * You may obtain a copy of the License at
rgrover1 716:11b41f651697 7 *
rgrover1 716:11b41f651697 8 * http://www.apache.org/licenses/LICENSE-2.0
rgrover1 716:11b41f651697 9 *
rgrover1 716:11b41f651697 10 * Unless required by applicable law or agreed to in writing, software
rgrover1 716:11b41f651697 11 * distributed under the License is distributed on an "AS IS" BASIS,
rgrover1 716:11b41f651697 12 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
rgrover1 716:11b41f651697 13 * See the License for the specific language governing permissions and
rgrover1 716:11b41f651697 14 * limitations under the License.
rgrover1 716:11b41f651697 15 */
rgrover1 716:11b41f651697 16
rgrover1 716:11b41f651697 17 #ifndef __BLE_H__
rgrover1 716:11b41f651697 18 #define __BLE_H__
rgrover1 716:11b41f651697 19
rgrover1 716:11b41f651697 20 #include "blecommon.h"
rgrover1 716:11b41f651697 21 #include "Gap.h"
rgrover1 716:11b41f651697 22 #include "GattServer.h"
rgrover1 716:11b41f651697 23 #include "GattClient.h"
rgrover1 716:11b41f651697 24 #include "BLEInstanceBase.h"
rgrover1 716:11b41f651697 25
rgrover1 716:11b41f651697 26 /**
rgrover1 716:11b41f651697 27 * The base class used to abstract away BLE capable radio transceivers or SOCs,
rgrover1 716:11b41f651697 28 * to enable this BLE API to work with any radio transparently.
rgrover1 716:11b41f651697 29 */
rgrover1 716:11b41f651697 30 class BLE
rgrover1 716:11b41f651697 31 {
rgrover1 716:11b41f651697 32 public:
rgrover1 716:11b41f651697 33 /**
rgrover1 716:11b41f651697 34 * Initialize the BLE controller. This should be called before using
rgrover1 716:11b41f651697 35 * anything else in the BLE_API.
rgrover1 716:11b41f651697 36 *
rgrover1 716:11b41f651697 37 * init() hands control to the underlying BLE module to accomplish
rgrover1 716:11b41f651697 38 * initialization. This initialization may tacitly depend on other hardware
rgrover1 716:11b41f651697 39 * setup (such as clocks or power-modes) which happens early on during
rgrover1 716:11b41f651697 40 * system startup. It may not be safe to call init() from global static
rgrover1 716:11b41f651697 41 * context where ordering is compiler specific and can't be guaranteed--it
rgrover1 716:11b41f651697 42 * is safe to call BLE::init() from within main().
rgrover1 716:11b41f651697 43 */
rgrover1 716:11b41f651697 44 ble_error_t init();
rgrover1 716:11b41f651697 45
rgrover1 716:11b41f651697 46 /**
rgrover1 716:11b41f651697 47 * Purge the BLE stack of GATT and GAP state. init() must be called
rgrover1 716:11b41f651697 48 * afterwards to re-instate services and GAP state. This API offers a way to
rgrover1 716:11b41f651697 49 * repopulate the GATT database with new services and characteristics.
rgrover1 716:11b41f651697 50 */
rgrover1 716:11b41f651697 51 ble_error_t shutdown(void) {
rgrover1 716:11b41f651697 52 clearAdvertisingPayload();
rgrover1 716:11b41f651697 53 return transport->shutdown();
rgrover1 716:11b41f651697 54 }
rgrover1 716:11b41f651697 55
rgrover1 716:11b41f651697 56 /**
rgrover1 716:11b41f651697 57 * This call allows the application to get the BLE stack version information.
rgrover1 716:11b41f651697 58 *
rgrover1 716:11b41f651697 59 * @return A pointer to a const string representing the version.
rgrover1 716:11b41f651697 60 * Note: The string is owned by the BLE_API.
rgrover1 716:11b41f651697 61 */
rgrover1 716:11b41f651697 62 const char *getVersion(void) {
rgrover1 716:11b41f651697 63 return transport->getVersion();
rgrover1 716:11b41f651697 64 }
rgrover1 716:11b41f651697 65
rgrover1 716:11b41f651697 66 /*
rgrover1 716:11b41f651697 67 * Accessors to GAP. Please refer to Gap.h. All GAP related functionality requires
rgrover1 716:11b41f651697 68 * going through this accessor.
rgrover1 716:11b41f651697 69 */
rgrover1 716:11b41f651697 70 const Gap &gap() const {
rgrover1 716:11b41f651697 71 return transport->getGap();
rgrover1 716:11b41f651697 72 }
rgrover1 716:11b41f651697 73 Gap &gap() {
rgrover1 716:11b41f651697 74 return transport->getGap();
rgrover1 716:11b41f651697 75 }
rgrover1 716:11b41f651697 76
rgrover1 716:11b41f651697 77 /*
rgrover1 716:11b41f651697 78 * Accessors to GATT Server. Please refer to GattServer.h. All GATTServer related
rgrover1 716:11b41f651697 79 * functionality requires going through this accessor.
rgrover1 716:11b41f651697 80 */
rgrover1 716:11b41f651697 81 const GattServer& gattServer() const {
rgrover1 716:11b41f651697 82 return transport->getGattServer();
rgrover1 716:11b41f651697 83 }
rgrover1 716:11b41f651697 84 GattServer& gattServer() {
rgrover1 716:11b41f651697 85 return transport->getGattServer();
rgrover1 716:11b41f651697 86 }
rgrover1 716:11b41f651697 87
rgrover1 716:11b41f651697 88 /*
rgrover1 716:11b41f651697 89 * Accessors to GATT Client. Please refer to GattClient.h. All GATTClient related
rgrover1 716:11b41f651697 90 * functionality requires going through this accessor.
rgrover1 716:11b41f651697 91 */
rgrover1 716:11b41f651697 92 const GattClient& gattClient() const {
rgrover1 716:11b41f651697 93 return transport->getGattClient();
rgrover1 716:11b41f651697 94 }
rgrover1 716:11b41f651697 95 GattClient& gattClient() {
rgrover1 716:11b41f651697 96 return transport->getGattClient();
rgrover1 716:11b41f651697 97 }
rgrover1 716:11b41f651697 98
rgrover1 716:11b41f651697 99 /*
rgrover1 716:11b41f651697 100 * Accessors to Security Manager. Please refer to SecurityManager.h. All
rgrover1 716:11b41f651697 101 * SecurityManager related functionality requires going through this
rgrover1 716:11b41f651697 102 * accessor.
rgrover1 716:11b41f651697 103 */
rgrover1 716:11b41f651697 104 const SecurityManager& securityManager() const {
rgrover1 716:11b41f651697 105 return transport->getSecurityManager();
rgrover1 716:11b41f651697 106 }
rgrover1 716:11b41f651697 107 SecurityManager& securityManager() {
rgrover1 716:11b41f651697 108 return transport->getSecurityManager();
rgrover1 716:11b41f651697 109 }
rgrover1 716:11b41f651697 110
rgrover1 716:11b41f651697 111 /**
rgrover1 716:11b41f651697 112 * Yield control to the BLE stack or to other tasks waiting for events. This
rgrover1 716:11b41f651697 113 * is a sleep function which will return when there is an application
rgrover1 716:11b41f651697 114 * specific interrupt, but the MCU might wake up several times before
rgrover1 716:11b41f651697 115 * returning (to service the stack). This is not always interchangeable with
rgrover1 716:11b41f651697 116 * WFE().
rgrover1 716:11b41f651697 117 */
rgrover1 716:11b41f651697 118 void waitForEvent(void) {
rgrover1 716:11b41f651697 119 transport->waitForEvent();
rgrover1 716:11b41f651697 120 }
rgrover1 716:11b41f651697 121
rgrover1 716:11b41f651697 122 /*
rgrover1 716:11b41f651697 123 * Deprecation alert!
rgrover1 716:11b41f651697 124 * All of the following are deprecated and may be dropped in a future
rgrover1 716:11b41f651697 125 * release. Documentation should refer to alternative APIs.
rgrover1 716:11b41f651697 126 */
rgrover1 716:11b41f651697 127
rgrover1 716:11b41f651697 128 /* GAP specific APIs. */
rgrover1 716:11b41f651697 129 public:
rgrover1 716:11b41f651697 130 /**
rgrover1 716:11b41f651697 131 * Set the BTLE MAC address and type.
rgrover1 716:11b41f651697 132 * @return BLE_ERROR_NONE on success.
rgrover1 716:11b41f651697 133 *
rgrover1 716:11b41f651697 134 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 135 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 136 * ble.setAddress(...) should be replaced with
rgrover1 716:11b41f651697 137 * ble.gap().setAddress(...).
rgrover1 716:11b41f651697 138 */
rgrover1 716:11b41f651697 139 ble_error_t setAddress(Gap::AddressType_t type, const Gap::Address_t address) {
rgrover1 716:11b41f651697 140 return gap().setAddress(type, address);
rgrover1 716:11b41f651697 141 }
rgrover1 716:11b41f651697 142
rgrover1 716:11b41f651697 143 /**
rgrover1 716:11b41f651697 144 * Fetch the BTLE MAC address and type.
rgrover1 716:11b41f651697 145 * @return BLE_ERROR_NONE on success.
rgrover1 716:11b41f651697 146 *
rgrover1 716:11b41f651697 147 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 148 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 149 * ble.getAddress(...) should be replaced with
rgrover1 716:11b41f651697 150 * ble.gap().getAddress(...).
rgrover1 716:11b41f651697 151 */
rgrover1 716:11b41f651697 152 ble_error_t getAddress(Gap::AddressType_t *typeP, Gap::Address_t address) {
rgrover1 716:11b41f651697 153 return gap().getAddress(typeP, address);
rgrover1 716:11b41f651697 154 }
rgrover1 716:11b41f651697 155
rgrover1 716:11b41f651697 156 /**
rgrover1 716:11b41f651697 157 * Set the GAP advertising mode to use for this device.
rgrover1 716:11b41f651697 158 *
rgrover1 716:11b41f651697 159 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 160 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 161 * ble.setAdvertisingType(...) should be replaced with
rgrover1 716:11b41f651697 162 * ble.gap().setAdvertisingType(...).
rgrover1 716:11b41f651697 163 */
rgrover1 716:11b41f651697 164 void setAdvertisingType(GapAdvertisingParams::AdvertisingType advType) {
rgrover1 716:11b41f651697 165 gap().setAdvertisingType(advType);
rgrover1 716:11b41f651697 166 }
rgrover1 716:11b41f651697 167
rgrover1 716:11b41f651697 168 /**
rgrover1 716:11b41f651697 169 * @param[in] interval
rgrover1 716:11b41f651697 170 * Advertising interval in units of milliseconds. Advertising
rgrover1 716:11b41f651697 171 * is disabled if interval is 0. If interval is smaller than
rgrover1 716:11b41f651697 172 * the minimum supported value, then the minimum supported
rgrover1 716:11b41f651697 173 * value is used instead. This minimum value can be discovered
rgrover1 716:11b41f651697 174 * using getMinAdvertisingInterval().
rgrover1 716:11b41f651697 175 *
rgrover1 716:11b41f651697 176 * This field must be set to 0 if connectionMode is equal
rgrover1 716:11b41f651697 177 * to ADV_CONNECTABLE_DIRECTED.
rgrover1 716:11b41f651697 178 *
rgrover1 716:11b41f651697 179 * @note: Decreasing this value will allow central devices to detect a
rgrover1 716:11b41f651697 180 * peripheral faster at the expense of more power being used by the radio
rgrover1 716:11b41f651697 181 * due to the higher data transmit rate.
rgrover1 716:11b41f651697 182 *
rgrover1 716:11b41f651697 183 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 184 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 185 * ble.setAdvertisingInterval(...) should be replaced with
rgrover1 716:11b41f651697 186 * ble.gap().setAdvertisingInterval(...).
rgrover1 716:11b41f651697 187 *
rgrover1 716:11b41f651697 188 * @note: [WARNING] This API previously used 0.625ms as the unit for its
rgrover1 716:11b41f651697 189 * 'interval' argument. That required an explicit conversion from
rgrover1 716:11b41f651697 190 * milliseconds using Gap::MSEC_TO_GAP_DURATION_UNITS(). This conversion is
rgrover1 716:11b41f651697 191 * no longer required as the new units are milliseconds. Any application
rgrover1 716:11b41f651697 192 * code depending on the old semantics would need to be updated accordingly.
rgrover1 716:11b41f651697 193 */
rgrover1 716:11b41f651697 194 void setAdvertisingInterval(uint16_t interval) {
rgrover1 716:11b41f651697 195 gap().setAdvertisingInterval(interval);
rgrover1 716:11b41f651697 196 }
rgrover1 716:11b41f651697 197
rgrover1 716:11b41f651697 198 /**
rgrover1 716:11b41f651697 199 * @return Minimum Advertising interval in milliseconds.
rgrover1 716:11b41f651697 200 *
rgrover1 716:11b41f651697 201 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 202 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 203 * ble.getMinAdvertisingInterval(...) should be replaced with
rgrover1 716:11b41f651697 204 * ble.gap().getMinAdvertisingInterval(...).
rgrover1 716:11b41f651697 205 */
rgrover1 716:11b41f651697 206 uint16_t getMinAdvertisingInterval(void) const {
rgrover1 716:11b41f651697 207 return gap().getMinAdvertisingInterval();
rgrover1 716:11b41f651697 208 }
rgrover1 716:11b41f651697 209
rgrover1 716:11b41f651697 210 /**
rgrover1 716:11b41f651697 211 * @return Minimum Advertising interval in milliseconds for non-connectible mode.
rgrover1 716:11b41f651697 212 *
rgrover1 716:11b41f651697 213 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 214 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 215 * ble.getMinNonConnectableAdvertisingInterval(...) should be replaced with
rgrover1 716:11b41f651697 216 * ble.gap().getMinNonConnectableAdvertisingInterval(...).
rgrover1 716:11b41f651697 217 */
rgrover1 716:11b41f651697 218 uint16_t getMinNonConnectableAdvertisingInterval(void) const {
rgrover1 716:11b41f651697 219 return gap().getMinNonConnectableAdvertisingInterval();
rgrover1 716:11b41f651697 220 }
rgrover1 716:11b41f651697 221
rgrover1 716:11b41f651697 222 /**
rgrover1 716:11b41f651697 223 * @return Maximum Advertising interval in milliseconds.
rgrover1 716:11b41f651697 224 *
rgrover1 716:11b41f651697 225 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 226 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 227 * ble.getMaxAdvertisingInterval(...) should be replaced with
rgrover1 716:11b41f651697 228 * ble.gap().getMaxAdvertisingInterval(...).
rgrover1 716:11b41f651697 229 */
rgrover1 716:11b41f651697 230 uint16_t getMaxAdvertisingInterval(void) const {
rgrover1 716:11b41f651697 231 return gap().getMaxAdvertisingInterval();
rgrover1 716:11b41f651697 232 }
rgrover1 716:11b41f651697 233
rgrover1 716:11b41f651697 234 /**
rgrover1 716:11b41f651697 235 * @param[in] timeout
rgrover1 716:11b41f651697 236 * Advertising timeout (in seconds) between 0x1 and 0x3FFF (1
rgrover1 716:11b41f651697 237 * and 16383). Use 0 to disable the advertising timeout.
rgrover1 716:11b41f651697 238 *
rgrover1 716:11b41f651697 239 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 240 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 241 * ble.setAdvertisingTimeout(...) should be replaced with
rgrover1 716:11b41f651697 242 * ble.gap().setAdvertisingTimeout(...).
rgrover1 716:11b41f651697 243 */
rgrover1 716:11b41f651697 244 void setAdvertisingTimeout(uint16_t timeout) {
rgrover1 716:11b41f651697 245 gap().setAdvertisingTimeout(timeout);
rgrover1 716:11b41f651697 246 }
rgrover1 716:11b41f651697 247
rgrover1 716:11b41f651697 248 /**
rgrover1 716:11b41f651697 249 * Setup a particular, user-constructed set of advertisement parameters for
rgrover1 716:11b41f651697 250 * the underlying stack. It would be uncommon for this API to be used
rgrover1 716:11b41f651697 251 * directly; there are other APIs to tweak advertisement parameters
rgrover1 716:11b41f651697 252 * individually (see above).
rgrover1 716:11b41f651697 253 *
rgrover1 716:11b41f651697 254 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 255 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 256 * ble.setAdvertisingParams(...) should be replaced with
rgrover1 716:11b41f651697 257 * ble.gap().setAdvertisingParams(...).
rgrover1 716:11b41f651697 258 */
rgrover1 716:11b41f651697 259 void setAdvertisingParams(const GapAdvertisingParams &advParams) {
rgrover1 716:11b41f651697 260 gap().setAdvertisingParams(advParams);
rgrover1 716:11b41f651697 261 }
rgrover1 716:11b41f651697 262
rgrover1 716:11b41f651697 263 /**
rgrover1 716:11b41f651697 264 * @return Read back advertising parameters. Useful for storing and
rgrover1 716:11b41f651697 265 * restoring parameters rapidly.
rgrover1 716:11b41f651697 266 *
rgrover1 716:11b41f651697 267 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 268 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 269 * ble.getAdvertisingParams(...) should be replaced with
rgrover1 716:11b41f651697 270 * ble.gap().getAdvertisingParams(...).
rgrover1 716:11b41f651697 271 */
rgrover1 716:11b41f651697 272 const GapAdvertisingParams &getAdvertisingParams(void) const {
rgrover1 716:11b41f651697 273 return gap().getAdvertisingParams();
rgrover1 716:11b41f651697 274 }
rgrover1 716:11b41f651697 275
rgrover1 716:11b41f651697 276 /**
rgrover1 716:11b41f651697 277 * Accumulate an AD structure in the advertising payload. Please note that
rgrover1 716:11b41f651697 278 * the payload is limited to 31 bytes. The SCAN_RESPONSE message may be used
rgrover1 716:11b41f651697 279 * as an additional 31 bytes if the advertising payload proves to be too
rgrover1 716:11b41f651697 280 * small.
rgrover1 716:11b41f651697 281 *
rgrover1 716:11b41f651697 282 * @param[in] flags
rgrover1 716:11b41f651697 283 * The flags to be added. Please refer to
rgrover1 716:11b41f651697 284 * GapAdvertisingData::Flags for valid flags. Multiple
rgrover1 716:11b41f651697 285 * flags may be specified in combination.
rgrover1 716:11b41f651697 286 *
rgrover1 716:11b41f651697 287 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 288 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 289 * ble.accumulateAdvertisingPayload(flags) should be replaced with
rgrover1 716:11b41f651697 290 * ble.gap().accumulateAdvertisingPayload(flags).
rgrover1 716:11b41f651697 291 */
rgrover1 716:11b41f651697 292 ble_error_t accumulateAdvertisingPayload(uint8_t flags) {
rgrover1 716:11b41f651697 293 return gap().accumulateAdvertisingPayload(flags);
rgrover1 716:11b41f651697 294 }
rgrover1 716:11b41f651697 295
rgrover1 716:11b41f651697 296 /**
rgrover1 716:11b41f651697 297 * Accumulate an AD structure in the advertising payload. Please note that
rgrover1 716:11b41f651697 298 * the payload is limited to 31 bytes. The SCAN_RESPONSE message may be used
rgrover1 716:11b41f651697 299 * as an additional 31 bytes if the advertising payload proves to be too
rgrover1 716:11b41f651697 300 * small.
rgrover1 716:11b41f651697 301 *
rgrover1 716:11b41f651697 302 * @param[in] app
rgrover1 716:11b41f651697 303 * The appearance of the peripheral.
rgrover1 716:11b41f651697 304 *
rgrover1 716:11b41f651697 305 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 306 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 307 * ble.accumulateAdvertisingPayload(appearance) should be replaced with
rgrover1 716:11b41f651697 308 * ble.gap().accumulateAdvertisingPayload(appearance).
rgrover1 716:11b41f651697 309 */
rgrover1 716:11b41f651697 310 ble_error_t accumulateAdvertisingPayload(GapAdvertisingData::Appearance app) {
rgrover1 716:11b41f651697 311 return gap().accumulateAdvertisingPayload(app);
rgrover1 716:11b41f651697 312 }
rgrover1 716:11b41f651697 313
rgrover1 716:11b41f651697 314 /**
rgrover1 716:11b41f651697 315 * Accumulate an AD structure in the advertising payload. Please note that
rgrover1 716:11b41f651697 316 * the payload is limited to 31 bytes. The SCAN_RESPONSE message may be used
rgrover1 716:11b41f651697 317 * as an additional 31 bytes if the advertising payload proves to be too
rgrover1 716:11b41f651697 318 * small.
rgrover1 716:11b41f651697 319 *
rgrover1 716:11b41f651697 320 * @param[in] app
rgrover1 716:11b41f651697 321 * The max transmit power to be used by the controller. This
rgrover1 716:11b41f651697 322 * is only a hint.
rgrover1 716:11b41f651697 323 *
rgrover1 716:11b41f651697 324 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 325 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 326 * ble.accumulateAdvertisingPayloadTxPower(txPower) should be replaced with
rgrover1 716:11b41f651697 327 * ble.gap().accumulateAdvertisingPayloadTxPower(txPower).
rgrover1 716:11b41f651697 328 */
rgrover1 716:11b41f651697 329 ble_error_t accumulateAdvertisingPayloadTxPower(int8_t power) {
rgrover1 716:11b41f651697 330 return gap().accumulateAdvertisingPayloadTxPower(power);
rgrover1 716:11b41f651697 331 }
rgrover1 716:11b41f651697 332
rgrover1 716:11b41f651697 333 /**
rgrover1 716:11b41f651697 334 * Accumulate a variable length byte-stream as an AD structure in the
rgrover1 716:11b41f651697 335 * advertising payload. Please note that the payload is limited to 31 bytes.
rgrover1 716:11b41f651697 336 * The SCAN_RESPONSE message may be used as an additional 31 bytes if the
rgrover1 716:11b41f651697 337 * advertising payload proves to be too small.
rgrover1 716:11b41f651697 338 *
rgrover1 716:11b41f651697 339 * @param type The type which describes the variable length data.
rgrover1 716:11b41f651697 340 * @param data data bytes.
rgrover1 716:11b41f651697 341 * @param len length of data.
rgrover1 716:11b41f651697 342 *
rgrover1 716:11b41f651697 343 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 344 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 345 * ble.accumulateAdvertisingPayload(...) should be replaced with
rgrover1 716:11b41f651697 346 * ble.gap().accumulateAdvertisingPayload(...).
rgrover1 716:11b41f651697 347 */
rgrover1 716:11b41f651697 348 ble_error_t accumulateAdvertisingPayload(GapAdvertisingData::DataType type, const uint8_t *data, uint8_t len) {
rgrover1 716:11b41f651697 349 return gap().accumulateAdvertisingPayload(type, data, len);
rgrover1 716:11b41f651697 350 }
rgrover1 716:11b41f651697 351
rgrover1 716:11b41f651697 352 /**
rgrover1 716:11b41f651697 353 * Setup a particular, user-constructed advertisement payload for the
rgrover1 716:11b41f651697 354 * underlying stack. It would be uncommon for this API to be used directly;
rgrover1 716:11b41f651697 355 * there are other APIs to build an advertisement payload (see above).
rgrover1 716:11b41f651697 356 *
rgrover1 716:11b41f651697 357 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 358 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 359 * ble.setAdvertisingData(...) should be replaced with
rgrover1 716:11b41f651697 360 * ble.gap().setAdvertisingPayload(...).
rgrover1 716:11b41f651697 361 */
rgrover1 716:11b41f651697 362 ble_error_t setAdvertisingData(const GapAdvertisingData &advData) {
rgrover1 716:11b41f651697 363 return gap().setAdvertisingPayload(advData);
rgrover1 716:11b41f651697 364 }
rgrover1 716:11b41f651697 365
rgrover1 716:11b41f651697 366 /**
rgrover1 716:11b41f651697 367 * @return Read back advertising data. Useful for storing and
rgrover1 716:11b41f651697 368 * restoring payload.
rgrover1 716:11b41f651697 369 *
rgrover1 716:11b41f651697 370 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 371 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 372 * ble.getAdvertisingData(...) should be replaced with
rgrover1 716:11b41f651697 373 * ble.gap().getAdvertisingPayload()(...).
rgrover1 716:11b41f651697 374 */
rgrover1 716:11b41f651697 375 const GapAdvertisingData &getAdvertisingData(void) const {
rgrover1 716:11b41f651697 376 return gap().getAdvertisingPayload();
rgrover1 716:11b41f651697 377 }
rgrover1 716:11b41f651697 378
rgrover1 716:11b41f651697 379 /**
rgrover1 716:11b41f651697 380 * Reset any advertising payload prepared from prior calls to
rgrover1 716:11b41f651697 381 * accumulateAdvertisingPayload(). This automatically propagates the re-
rgrover1 716:11b41f651697 382 * initialized adv payload to the underlying stack.
rgrover1 716:11b41f651697 383 *
rgrover1 716:11b41f651697 384 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 385 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 386 * ble.clearAdvertisingPayload(...) should be replaced with
rgrover1 716:11b41f651697 387 * ble.gap().clearAdvertisingPayload(...).
rgrover1 716:11b41f651697 388 */
rgrover1 716:11b41f651697 389 void clearAdvertisingPayload(void) {
rgrover1 716:11b41f651697 390 gap().clearAdvertisingPayload();
rgrover1 716:11b41f651697 391 }
rgrover1 716:11b41f651697 392
rgrover1 716:11b41f651697 393 /**
rgrover1 716:11b41f651697 394 * This API is *deprecated* and resolves to a no-operation. It is left here
rgrover1 716:11b41f651697 395 * to allow older code to compile. Please avoid using this API in new code.
rgrover1 716:11b41f651697 396 * This API will be dropped in a future release.
rgrover1 716:11b41f651697 397 *
rgrover1 716:11b41f651697 398 * Formerly, it would be used to dynamically reset the accumulated advertising
rgrover1 716:11b41f651697 399 * payload and scanResponse; to do this, the application would clear and re-
rgrover1 716:11b41f651697 400 * accumulate a new advertising payload (and scanResponse) before using this
rgrover1 716:11b41f651697 401 * API. Updates to the underlying advertisement payload now happen
rgrover1 716:11b41f651697 402 * implicitly.
rgrover1 716:11b41f651697 403 */
rgrover1 716:11b41f651697 404 ble_error_t setAdvertisingPayload(void) {
rgrover1 716:11b41f651697 405 return BLE_ERROR_NONE;
rgrover1 716:11b41f651697 406 }
rgrover1 716:11b41f651697 407
rgrover1 716:11b41f651697 408 /**
rgrover1 716:11b41f651697 409 * Accumulate a variable length byte-stream as an AD structure in the
rgrover1 716:11b41f651697 410 * scanResponse payload.
rgrover1 716:11b41f651697 411 *
rgrover1 716:11b41f651697 412 * @param[in] type The type which describes the variable length data.
rgrover1 716:11b41f651697 413 * @param[in] data data bytes.
rgrover1 716:11b41f651697 414 * @param[in] len length of data.
rgrover1 716:11b41f651697 415 *
rgrover1 716:11b41f651697 416 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 417 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 418 * ble.accumulateScanResponse(...) should be replaced with
rgrover1 716:11b41f651697 419 * ble.gap().accumulateScanResponse(...).
rgrover1 716:11b41f651697 420 */
rgrover1 716:11b41f651697 421 ble_error_t accumulateScanResponse(GapAdvertisingData::DataType type, const uint8_t *data, uint8_t len) {
rgrover1 716:11b41f651697 422 return gap().accumulateScanResponse(type, data, len);
rgrover1 716:11b41f651697 423 }
rgrover1 716:11b41f651697 424
rgrover1 716:11b41f651697 425 /**
rgrover1 716:11b41f651697 426 * Reset any scan response prepared from prior calls to
rgrover1 716:11b41f651697 427 * accumulateScanResponse().
rgrover1 716:11b41f651697 428 *
rgrover1 716:11b41f651697 429 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 430 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 431 * ble.clearScanResponse(...) should be replaced with
rgrover1 716:11b41f651697 432 * ble.gap().clearScanResponse(...).
rgrover1 716:11b41f651697 433 */
rgrover1 716:11b41f651697 434 void clearScanResponse(void) {
rgrover1 716:11b41f651697 435 gap().clearScanResponse();
rgrover1 716:11b41f651697 436 }
rgrover1 716:11b41f651697 437
rgrover1 716:11b41f651697 438 /**
rgrover1 716:11b41f651697 439 * Start advertising.
rgrover1 716:11b41f651697 440 *
rgrover1 716:11b41f651697 441 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 442 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 443 * ble.startAdvertising(...) should be replaced with
rgrover1 716:11b41f651697 444 * ble.gap().startAdvertising(...).
rgrover1 716:11b41f651697 445 */
rgrover1 716:11b41f651697 446 ble_error_t startAdvertising(void) {
rgrover1 716:11b41f651697 447 return gap().startAdvertising();
rgrover1 716:11b41f651697 448 }
rgrover1 716:11b41f651697 449
rgrover1 716:11b41f651697 450 /**
rgrover1 716:11b41f651697 451 * Stop advertising.
rgrover1 716:11b41f651697 452 *
rgrover1 716:11b41f651697 453 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 454 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 455 * ble.stopAdvertising(...) should be replaced with
rgrover1 716:11b41f651697 456 * ble.gap().stopAdvertising(...).
rgrover1 716:11b41f651697 457 */
rgrover1 716:11b41f651697 458 ble_error_t stopAdvertising(void) {
rgrover1 716:11b41f651697 459 return gap().stopAdvertising();
rgrover1 716:11b41f651697 460 }
rgrover1 716:11b41f651697 461
rgrover1 716:11b41f651697 462 /**
rgrover1 716:11b41f651697 463 * Setup parameters for GAP scanning--i.e. observer mode.
rgrover1 716:11b41f651697 464 * @param[in] interval
rgrover1 716:11b41f651697 465 * Scan interval (in milliseconds) [valid values lie between 2.5ms and 10.24s].
rgrover1 716:11b41f651697 466 * @param[in] window
rgrover1 716:11b41f651697 467 * Scan Window (in milliseconds) [valid values lie between 2.5ms and 10.24s].
rgrover1 716:11b41f651697 468 * @param[in] timeout
rgrover1 716:11b41f651697 469 * Scan timeout (in seconds) between 0x0001 and 0xFFFF, 0x0000 disables timeout.
rgrover1 716:11b41f651697 470 * @param[in] activeScanning
rgrover1 716:11b41f651697 471 * Set to True if active-scanning is required. This is used to fetch the
rgrover1 716:11b41f651697 472 * scan response from a peer if possible.
rgrover1 716:11b41f651697 473 *
rgrover1 716:11b41f651697 474 * The scanning window divided by the interval determines the duty cycle for
rgrover1 716:11b41f651697 475 * scanning. For example, if the interval is 100ms and the window is 10ms,
rgrover1 716:11b41f651697 476 * then the controller will scan for 10 percent of the time. It is possible
rgrover1 716:11b41f651697 477 * to have the interval and window set to the same value. In this case,
rgrover1 716:11b41f651697 478 * scanning is continuous, with a change of scanning frequency once every
rgrover1 716:11b41f651697 479 * interval.
rgrover1 716:11b41f651697 480 *
rgrover1 716:11b41f651697 481 * Once the scanning parameters have been configured, scanning can be
rgrover1 716:11b41f651697 482 * enabled by using startScan().
rgrover1 716:11b41f651697 483 *
rgrover1 716:11b41f651697 484 * @Note: The scan interval and window are recommendations to the BLE stack.
rgrover1 716:11b41f651697 485 *
rgrover1 716:11b41f651697 486 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 487 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 488 * ble.setScanParams(...) should be replaced with
rgrover1 716:11b41f651697 489 * ble.gap().setScanParams(...).
rgrover1 716:11b41f651697 490 */
rgrover1 716:11b41f651697 491 ble_error_t setScanParams(uint16_t interval = GapScanningParams::SCAN_INTERVAL_MAX,
rgrover1 716:11b41f651697 492 uint16_t window = GapScanningParams::SCAN_WINDOW_MAX,
rgrover1 716:11b41f651697 493 uint16_t timeout = 0,
rgrover1 716:11b41f651697 494 bool activeScanning = false) {
rgrover1 716:11b41f651697 495 return gap().setScanParams(interval, window, timeout, activeScanning);
rgrover1 716:11b41f651697 496 }
rgrover1 716:11b41f651697 497
rgrover1 716:11b41f651697 498 /**
rgrover1 716:11b41f651697 499 * Setup the scanInterval parameter for GAP scanning--i.e. observer mode.
rgrover1 716:11b41f651697 500 * @param[in] interval
rgrover1 716:11b41f651697 501 * Scan interval (in milliseconds) [valid values lie between 2.5ms and 10.24s].
rgrover1 716:11b41f651697 502 *
rgrover1 716:11b41f651697 503 * The scanning window divided by the interval determines the duty cycle for
rgrover1 716:11b41f651697 504 * scanning. For example, if the interval is 100ms and the window is 10ms,
rgrover1 716:11b41f651697 505 * then the controller will scan for 10 percent of the time. It is possible
rgrover1 716:11b41f651697 506 * to have the interval and window set to the same value. In this case,
rgrover1 716:11b41f651697 507 * scanning is continuous, with a change of scanning frequency once every
rgrover1 716:11b41f651697 508 * interval.
rgrover1 716:11b41f651697 509 *
rgrover1 716:11b41f651697 510 * Once the scanning parameters have been configured, scanning can be
rgrover1 716:11b41f651697 511 * enabled by using startScan().
rgrover1 716:11b41f651697 512 *
rgrover1 716:11b41f651697 513 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 514 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 515 * ble.setScanInterval(interval) should be replaced with
rgrover1 716:11b41f651697 516 * ble.gap().setScanInterval(interval).
rgrover1 716:11b41f651697 517 */
rgrover1 716:11b41f651697 518 ble_error_t setScanInterval(uint16_t interval) {
rgrover1 716:11b41f651697 519 return gap().setScanInterval(interval);
rgrover1 716:11b41f651697 520 }
rgrover1 716:11b41f651697 521
rgrover1 716:11b41f651697 522 /**
rgrover1 716:11b41f651697 523 * Setup the scanWindow parameter for GAP scanning--i.e. observer mode.
rgrover1 716:11b41f651697 524 * @param[in] window
rgrover1 716:11b41f651697 525 * Scan Window (in milliseconds) [valid values lie between 2.5ms and 10.24s].
rgrover1 716:11b41f651697 526 *
rgrover1 716:11b41f651697 527 * The scanning window divided by the interval determines the duty cycle for
rgrover1 716:11b41f651697 528 * scanning. For example, if the interval is 100ms and the window is 10ms,
rgrover1 716:11b41f651697 529 * then the controller will scan for 10 percent of the time. It is possible
rgrover1 716:11b41f651697 530 * to have the interval and window set to the same value. In this case,
rgrover1 716:11b41f651697 531 * scanning is continuous, with a change of scanning frequency once every
rgrover1 716:11b41f651697 532 * interval.
rgrover1 716:11b41f651697 533 *
rgrover1 716:11b41f651697 534 * Once the scanning parameters have been configured, scanning can be
rgrover1 716:11b41f651697 535 * enabled by using startScan().
rgrover1 716:11b41f651697 536 *
rgrover1 716:11b41f651697 537 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 538 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 539 * ble.setScanWindow(window) should be replaced with
rgrover1 716:11b41f651697 540 * ble.gap().setScanWindow(window).
rgrover1 716:11b41f651697 541 */
rgrover1 716:11b41f651697 542 ble_error_t setScanWindow(uint16_t window) {
rgrover1 716:11b41f651697 543 return gap().setScanWindow(window);
rgrover1 716:11b41f651697 544 }
rgrover1 716:11b41f651697 545
rgrover1 716:11b41f651697 546 /**
rgrover1 716:11b41f651697 547 * Setup parameters for GAP scanning--i.e. observer mode.
rgrover1 716:11b41f651697 548 * @param[in] timeout
rgrover1 716:11b41f651697 549 * Scan timeout (in seconds) between 0x0001 and 0xFFFF, 0x0000 disables timeout.
rgrover1 716:11b41f651697 550 *
rgrover1 716:11b41f651697 551 * The scanning window divided by the interval determines the duty cycle for
rgrover1 716:11b41f651697 552 * scanning. For example, if the interval is 100ms and the window is 10ms,
rgrover1 716:11b41f651697 553 * then the controller will scan for 10 percent of the time. It is possible
rgrover1 716:11b41f651697 554 * to have the interval and window set to the same value. In this case,
rgrover1 716:11b41f651697 555 * scanning is continuous, with a change of scanning frequency once every
rgrover1 716:11b41f651697 556 * interval.
rgrover1 716:11b41f651697 557 *
rgrover1 716:11b41f651697 558 * Once the scanning parameters have been configured, scanning can be
rgrover1 716:11b41f651697 559 * enabled by using startScan().
rgrover1 716:11b41f651697 560 *
rgrover1 716:11b41f651697 561 * @Note: The scan interval and window are recommendations to the BLE stack.
rgrover1 716:11b41f651697 562 *
rgrover1 716:11b41f651697 563 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 564 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 565 * ble.setScanTimeout(...) should be replaced with
rgrover1 716:11b41f651697 566 * ble.gap().setScanTimeout(...).
rgrover1 716:11b41f651697 567 */
rgrover1 716:11b41f651697 568 ble_error_t setScanTimeout(uint16_t timeout) {
rgrover1 716:11b41f651697 569 return gap().setScanTimeout(timeout);
rgrover1 716:11b41f651697 570 }
rgrover1 716:11b41f651697 571
rgrover1 716:11b41f651697 572 /**
rgrover1 716:11b41f651697 573 * Setup parameters for GAP scanning--i.e. observer mode.
rgrover1 716:11b41f651697 574 * @param[in] activeScanning
rgrover1 716:11b41f651697 575 * Set to True if active-scanning is required. This is used to fetch the
rgrover1 716:11b41f651697 576 * scan response from a peer if possible.
rgrover1 716:11b41f651697 577 *
rgrover1 716:11b41f651697 578 * Once the scanning parameters have been configured, scanning can be
rgrover1 716:11b41f651697 579 * enabled by using startScan().
rgrover1 716:11b41f651697 580 *
rgrover1 716:11b41f651697 581 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 582 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 583 * ble.setActiveScan(...) should be replaced with
rgrover1 716:11b41f651697 584 * ble.gap().setActiveScanning(...).
rgrover1 716:11b41f651697 585 */
rgrover1 716:11b41f651697 586 void setActiveScan(bool activeScanning) {
rgrover1 716:11b41f651697 587 gap().setActiveScanning(activeScanning);
rgrover1 716:11b41f651697 588 }
rgrover1 716:11b41f651697 589
rgrover1 716:11b41f651697 590 /**
rgrover1 716:11b41f651697 591 * Start scanning (Observer Procedure) based on the parameters currently in
rgrover1 716:11b41f651697 592 * effect.
rgrover1 716:11b41f651697 593 *
rgrover1 716:11b41f651697 594 * @param[in] callback
rgrover1 716:11b41f651697 595 * The application specific callback to be invoked upon
rgrover1 716:11b41f651697 596 * receiving every advertisement report. This can be passed in
rgrover1 716:11b41f651697 597 * as NULL, in which case scanning may not be enabled at all.
rgrover1 716:11b41f651697 598 *
rgrover1 716:11b41f651697 599 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 600 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 601 * ble.startScan(callback) should be replaced with
rgrover1 716:11b41f651697 602 * ble.gap().startScan(callback).
rgrover1 716:11b41f651697 603 */
rgrover1 716:11b41f651697 604 ble_error_t startScan(void (*callback)(const Gap::AdvertisementCallbackParams_t *params)) {
rgrover1 716:11b41f651697 605 return gap().startScan(callback);
rgrover1 716:11b41f651697 606 }
rgrover1 716:11b41f651697 607
rgrover1 716:11b41f651697 608 /**
rgrover1 716:11b41f651697 609 * Same as above, but this takes an (object, method) pair for a callback.
rgrover1 716:11b41f651697 610 *
rgrover1 716:11b41f651697 611 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 612 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 613 * ble.startScan(callback) should be replaced with
rgrover1 716:11b41f651697 614 * ble.gap().startScan(object, callback).
rgrover1 716:11b41f651697 615 */
rgrover1 716:11b41f651697 616 template<typename T>
rgrover1 716:11b41f651697 617 ble_error_t startScan(T *object, void (T::*memberCallback)(const Gap::AdvertisementCallbackParams_t *params));
rgrover1 716:11b41f651697 618
rgrover1 716:11b41f651697 619 /**
rgrover1 716:11b41f651697 620 * Stop scanning. The current scanning parameters remain in effect.
rgrover1 716:11b41f651697 621 *
rgrover1 716:11b41f651697 622 * @retval BLE_ERROR_NONE if successfully stopped scanning procedure.
rgrover1 716:11b41f651697 623 *
rgrover1 716:11b41f651697 624 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 625 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 626 * ble.stopScan() should be replaced with
rgrover1 716:11b41f651697 627 * ble.gap().stopScan().
rgrover1 716:11b41f651697 628 */
rgrover1 716:11b41f651697 629 ble_error_t stopScan(void) {
rgrover1 716:11b41f651697 630 return gap().stopScan();
rgrover1 716:11b41f651697 631 }
rgrover1 716:11b41f651697 632
rgrover1 716:11b41f651697 633 /**
rgrover1 716:11b41f651697 634 * Create a connection (GAP Link Establishment).
rgrover1 716:11b41f651697 635 * @param peerAddr
rgrover1 716:11b41f651697 636 * 48-bit address, LSB format.
rgrover1 716:11b41f651697 637 * @param peerAddrType
rgrover1 716:11b41f651697 638 * Address type of the peer.
rgrover1 716:11b41f651697 639 * @param connectionParams
rgrover1 716:11b41f651697 640 * Connection parameters.
rgrover1 716:11b41f651697 641 * @param scanParams
rgrover1 716:11b41f651697 642 * Paramters to be used while scanning for the peer.
rgrover1 716:11b41f651697 643 * @return BLE_ERROR_NONE if connection establishment procedure is started
rgrover1 716:11b41f651697 644 * successfully. The onConnection callback (if set) will be invoked upon
rgrover1 716:11b41f651697 645 * a connection event.
rgrover1 716:11b41f651697 646 *
rgrover1 716:11b41f651697 647 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 648 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 649 * ble.connect(...) should be replaced with
rgrover1 716:11b41f651697 650 * ble.gap().connect(...).
rgrover1 716:11b41f651697 651 */
rgrover1 716:11b41f651697 652 ble_error_t connect(const Gap::Address_t peerAddr,
rgrover1 716:11b41f651697 653 Gap::AddressType_t peerAddrType = Gap::ADDR_TYPE_RANDOM_STATIC,
rgrover1 716:11b41f651697 654 const Gap::ConnectionParams_t *connectionParams = NULL,
rgrover1 716:11b41f651697 655 const GapScanningParams *scanParams = NULL) {
rgrover1 716:11b41f651697 656 return gap().connect(peerAddr, peerAddrType, connectionParams, scanParams);
rgrover1 716:11b41f651697 657 }
rgrover1 716:11b41f651697 658
rgrover1 716:11b41f651697 659 /**
rgrover1 716:11b41f651697 660 * This call initiates the disconnection procedure, and its completion will
rgrover1 716:11b41f651697 661 * be communicated to the application with an invocation of the
rgrover1 716:11b41f651697 662 * onDisconnection callback.
rgrover1 716:11b41f651697 663 *
rgrover1 716:11b41f651697 664 * @param[in] connectionHandle
rgrover1 716:11b41f651697 665 * @param[in] reason
rgrover1 716:11b41f651697 666 * The reason for disconnection to be sent back to the peer.
rgrover1 716:11b41f651697 667 */
rgrover1 716:11b41f651697 668 ble_error_t disconnect(Gap::Handle_t connectionHandle, Gap::DisconnectionReason_t reason) {
rgrover1 716:11b41f651697 669 return gap().disconnect(connectionHandle, reason);
rgrover1 716:11b41f651697 670 }
rgrover1 716:11b41f651697 671
rgrover1 716:11b41f651697 672 /**
rgrover1 716:11b41f651697 673 * This call initiates the disconnection procedure, and its completion will
rgrover1 716:11b41f651697 674 * be communicated to the application with an invocation of the
rgrover1 716:11b41f651697 675 * onDisconnection callback.
rgrover1 716:11b41f651697 676 *
rgrover1 716:11b41f651697 677 * @param reason
rgrover1 716:11b41f651697 678 * The reason for disconnection to be sent back to the peer.
rgrover1 716:11b41f651697 679 *
rgrover1 716:11b41f651697 680 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 681 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 682 * ble.disconnect(reason) should be replaced with
rgrover1 716:11b41f651697 683 * ble.gap().disconnect(reason).
rgrover1 716:11b41f651697 684 *
rgrover1 716:11b41f651697 685 * @note: this version of disconnect() doesn't take a connection handle. It
rgrover1 716:11b41f651697 686 * will work reliably only for stacks which are limited to a single
rgrover1 716:11b41f651697 687 * connection. This API should be considered *deprecated* in favour of the
rgrover1 716:11b41f651697 688 * alternative which takes a connection handle. It will be dropped in the future.
rgrover1 716:11b41f651697 689 */
rgrover1 716:11b41f651697 690 ble_error_t disconnect(Gap::DisconnectionReason_t reason) {
rgrover1 716:11b41f651697 691 return gap().disconnect(reason);
rgrover1 716:11b41f651697 692 }
rgrover1 716:11b41f651697 693
rgrover1 716:11b41f651697 694 /**
rgrover1 716:11b41f651697 695 * Returns the current GAP state of the device using a bitmask which
rgrover1 716:11b41f651697 696 * describes whether the device is advertising and/or connected.
rgrover1 716:11b41f651697 697 *
rgrover1 716:11b41f651697 698 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 699 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 700 * ble.getGapState() should be replaced with
rgrover1 716:11b41f651697 701 * ble.gap().getState().
rgrover1 716:11b41f651697 702 */
rgrover1 716:11b41f651697 703 Gap::GapState_t getGapState(void) const {
rgrover1 716:11b41f651697 704 return gap().getState();
rgrover1 716:11b41f651697 705 }
rgrover1 716:11b41f651697 706
rgrover1 716:11b41f651697 707 /**
rgrover1 716:11b41f651697 708 * Get the GAP peripheral preferred connection parameters. These are the
rgrover1 716:11b41f651697 709 * defaults that the peripheral would like to have in a connection. The
rgrover1 716:11b41f651697 710 * choice of the connection parameters is eventually up to the central.
rgrover1 716:11b41f651697 711 *
rgrover1 716:11b41f651697 712 * @param[out] params
rgrover1 716:11b41f651697 713 * The structure where the parameters will be stored. Memory
rgrover1 716:11b41f651697 714 * for this is owned by the caller.
rgrover1 716:11b41f651697 715 *
rgrover1 716:11b41f651697 716 * @return BLE_ERROR_NONE if the parameters were successfully filled into
rgrover1 716:11b41f651697 717 * the given structure pointed to by params.
rgrover1 716:11b41f651697 718 *
rgrover1 716:11b41f651697 719 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 720 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 721 * ble.getPreferredConnectionParams() should be replaced with
rgrover1 716:11b41f651697 722 * ble.gap().getPreferredConnectionParams().
rgrover1 716:11b41f651697 723 */
rgrover1 716:11b41f651697 724 ble_error_t getPreferredConnectionParams(Gap::ConnectionParams_t *params) {
rgrover1 716:11b41f651697 725 return gap().getPreferredConnectionParams(params);
rgrover1 716:11b41f651697 726 }
rgrover1 716:11b41f651697 727
rgrover1 716:11b41f651697 728 /**
rgrover1 716:11b41f651697 729 * Set the GAP peripheral preferred connection parameters. These are the
rgrover1 716:11b41f651697 730 * defaults that the peripheral would like to have in a connection. The
rgrover1 716:11b41f651697 731 * choice of the connection parameters is eventually up to the central.
rgrover1 716:11b41f651697 732 *
rgrover1 716:11b41f651697 733 * @param[in] params
rgrover1 716:11b41f651697 734 * The structure containing the desired parameters.
rgrover1 716:11b41f651697 735 *
rgrover1 716:11b41f651697 736 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 737 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 738 * ble.setPreferredConnectionParams() should be replaced with
rgrover1 716:11b41f651697 739 * ble.gap().setPreferredConnectionParams().
rgrover1 716:11b41f651697 740 */
rgrover1 716:11b41f651697 741 ble_error_t setPreferredConnectionParams(const Gap::ConnectionParams_t *params) {
rgrover1 716:11b41f651697 742 return gap().setPreferredConnectionParams(params);
rgrover1 716:11b41f651697 743 }
rgrover1 716:11b41f651697 744
rgrover1 716:11b41f651697 745 /**
rgrover1 716:11b41f651697 746 * Update connection parameters while in the peripheral role.
rgrover1 716:11b41f651697 747 * @details In the peripheral role, this will send the corresponding L2CAP request to the connected peer and wait for
rgrover1 716:11b41f651697 748 * the central to perform the procedure.
rgrover1 716:11b41f651697 749 * @param[in] handle
rgrover1 716:11b41f651697 750 * Connection Handle
rgrover1 716:11b41f651697 751 * @param[in] params
rgrover1 716:11b41f651697 752 * Pointer to desired connection parameters. If NULL is provided on a peripheral role,
rgrover1 716:11b41f651697 753 * the parameters in the PPCP characteristic of the GAP service will be used instead.
rgrover1 716:11b41f651697 754 *
rgrover1 716:11b41f651697 755 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 756 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 757 * ble.updateConnectionParams() should be replaced with
rgrover1 716:11b41f651697 758 * ble.gap().updateConnectionParams().
rgrover1 716:11b41f651697 759 */
rgrover1 716:11b41f651697 760 ble_error_t updateConnectionParams(Gap::Handle_t handle, const Gap::ConnectionParams_t *params) {
rgrover1 716:11b41f651697 761 return gap().updateConnectionParams(handle, params);
rgrover1 716:11b41f651697 762 }
rgrover1 716:11b41f651697 763
rgrover1 716:11b41f651697 764 /**
rgrover1 716:11b41f651697 765 * Set the device name characteristic in the GAP service.
rgrover1 716:11b41f651697 766 * @param[in] deviceName
rgrover1 716:11b41f651697 767 * The new value for the device-name. This is a UTF-8 encoded, <b>NULL-terminated</b> string.
rgrover1 716:11b41f651697 768 *
rgrover1 716:11b41f651697 769 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 770 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 771 * ble.setDeviceName() should be replaced with
rgrover1 716:11b41f651697 772 * ble.gap().setDeviceName().
rgrover1 716:11b41f651697 773 */
rgrover1 716:11b41f651697 774 ble_error_t setDeviceName(const uint8_t *deviceName) {
rgrover1 716:11b41f651697 775 return gap().setDeviceName(deviceName);
rgrover1 716:11b41f651697 776 }
rgrover1 716:11b41f651697 777
rgrover1 716:11b41f651697 778 /**
rgrover1 716:11b41f651697 779 * Get the value of the device name characteristic in the GAP service.
rgrover1 716:11b41f651697 780 * @param[out] deviceName
rgrover1 716:11b41f651697 781 * Pointer to an empty buffer where the UTF-8 *non NULL-
rgrover1 716:11b41f651697 782 * terminated* string will be placed. Set this
rgrover1 716:11b41f651697 783 * value to NULL in order to obtain the deviceName-length
rgrover1 716:11b41f651697 784 * from the 'length' parameter.
rgrover1 716:11b41f651697 785 *
rgrover1 716:11b41f651697 786 * @param[in/out] lengthP
rgrover1 716:11b41f651697 787 * (on input) Length of the buffer pointed to by deviceName;
rgrover1 716:11b41f651697 788 * (on output) the complete device name length (without the
rgrover1 716:11b41f651697 789 * null terminator).
rgrover1 716:11b41f651697 790 *
rgrover1 716:11b41f651697 791 * @note If the device name is longer than the size of the supplied buffer,
rgrover1 716:11b41f651697 792 * length will return the complete device name length, and not the
rgrover1 716:11b41f651697 793 * number of bytes actually returned in deviceName. The application may
rgrover1 716:11b41f651697 794 * use this information to retry with a suitable buffer size.
rgrover1 716:11b41f651697 795 *
rgrover1 716:11b41f651697 796 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 797 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 798 * ble.getDeviceName() should be replaced with
rgrover1 716:11b41f651697 799 * ble.gap().getDeviceName().
rgrover1 716:11b41f651697 800 */
rgrover1 716:11b41f651697 801 ble_error_t getDeviceName(uint8_t *deviceName, unsigned *lengthP) {
rgrover1 716:11b41f651697 802 return gap().getDeviceName(deviceName, lengthP);
rgrover1 716:11b41f651697 803 }
rgrover1 716:11b41f651697 804
rgrover1 716:11b41f651697 805 /**
rgrover1 716:11b41f651697 806 * Set the appearance characteristic in the GAP service.
rgrover1 716:11b41f651697 807 * @param[in] appearance
rgrover1 716:11b41f651697 808 * The new value for the device-appearance.
rgrover1 716:11b41f651697 809 *
rgrover1 716:11b41f651697 810 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 811 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 812 * ble.setAppearance() should be replaced with
rgrover1 716:11b41f651697 813 * ble.gap().setAppearance().
rgrover1 716:11b41f651697 814 */
rgrover1 716:11b41f651697 815 ble_error_t setAppearance(GapAdvertisingData::Appearance appearance) {
rgrover1 716:11b41f651697 816 return gap().setAppearance(appearance);
rgrover1 716:11b41f651697 817 }
rgrover1 716:11b41f651697 818
rgrover1 716:11b41f651697 819 /**
rgrover1 716:11b41f651697 820 * Get the appearance characteristic in the GAP service.
rgrover1 716:11b41f651697 821 * @param[out] appearance
rgrover1 716:11b41f651697 822 * The new value for the device-appearance.
rgrover1 716:11b41f651697 823 *
rgrover1 716:11b41f651697 824 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 825 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 826 * ble.getAppearance() should be replaced with
rgrover1 716:11b41f651697 827 * ble.gap().getAppearance().
rgrover1 716:11b41f651697 828 */
rgrover1 716:11b41f651697 829 ble_error_t getAppearance(GapAdvertisingData::Appearance *appearanceP) {
rgrover1 716:11b41f651697 830 return gap().getAppearance(appearanceP);
rgrover1 716:11b41f651697 831 }
rgrover1 716:11b41f651697 832
rgrover1 716:11b41f651697 833 /**
rgrover1 716:11b41f651697 834 * Set the radio's transmit power.
rgrover1 716:11b41f651697 835 * @param[in] txPower Radio transmit power in dBm.
rgrover1 716:11b41f651697 836 *
rgrover1 716:11b41f651697 837 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 838 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 839 * ble.setTxPower() should be replaced with
rgrover1 716:11b41f651697 840 * ble.gap().setTxPower().
rgrover1 716:11b41f651697 841 */
rgrover1 716:11b41f651697 842 ble_error_t setTxPower(int8_t txPower) {
rgrover1 716:11b41f651697 843 return gap().setTxPower(txPower);
rgrover1 716:11b41f651697 844 }
rgrover1 716:11b41f651697 845
rgrover1 716:11b41f651697 846 /**
rgrover1 716:11b41f651697 847 * Query the underlying stack for permitted arguments for setTxPower().
rgrover1 716:11b41f651697 848 *
rgrover1 716:11b41f651697 849 * @param[out] valueArrayPP
rgrover1 716:11b41f651697 850 * Out parameter to receive the immutable array of Tx values.
rgrover1 716:11b41f651697 851 * @param[out] countP
rgrover1 716:11b41f651697 852 * Out parameter to receive the array's size.
rgrover1 716:11b41f651697 853 *
rgrover1 716:11b41f651697 854 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 855 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 856 * ble.getPermittedTxPowerValues() should be replaced with
rgrover1 716:11b41f651697 857 * ble.gap().getPermittedTxPowerValues().
rgrover1 716:11b41f651697 858 */
rgrover1 716:11b41f651697 859 void getPermittedTxPowerValues(const int8_t **valueArrayPP, size_t *countP) {
rgrover1 716:11b41f651697 860 gap().getPermittedTxPowerValues(valueArrayPP, countP);
rgrover1 716:11b41f651697 861 }
rgrover1 716:11b41f651697 862
rgrover1 716:11b41f651697 863 /**
rgrover1 716:11b41f651697 864 * Add a service declaration to the local server ATT table. Also add the
rgrover1 716:11b41f651697 865 * characteristics contained within.
rgrover1 716:11b41f651697 866 *
rgrover1 716:11b41f651697 867 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 868 * You should use the parallel API from GattServer directly. A former call
rgrover1 716:11b41f651697 869 * to ble.addService() should be replaced with
rgrover1 716:11b41f651697 870 * ble.gattServer().addService().
rgrover1 716:11b41f651697 871 */
rgrover1 716:11b41f651697 872 ble_error_t addService(GattService &service) {
rgrover1 716:11b41f651697 873 return gattServer().addService(service);
rgrover1 716:11b41f651697 874 }
rgrover1 716:11b41f651697 875
rgrover1 716:11b41f651697 876 /**
rgrover1 716:11b41f651697 877 * Read the value of a characteristic from the local GattServer
rgrover1 716:11b41f651697 878 * @param[in] attributeHandle
rgrover1 716:11b41f651697 879 * Attribute handle for the value attribute of the characteristic.
rgrover1 716:11b41f651697 880 * @param[out] buffer
rgrover1 716:11b41f651697 881 * A buffer to hold the value being read.
rgrover1 716:11b41f651697 882 * @param[in/out] lengthP
rgrover1 716:11b41f651697 883 * Length of the buffer being supplied. If the attribute
rgrover1 716:11b41f651697 884 * value is longer than the size of the supplied buffer,
rgrover1 716:11b41f651697 885 * this variable will hold upon return the total attribute value length
rgrover1 716:11b41f651697 886 * (excluding offset). The application may use this
rgrover1 716:11b41f651697 887 * information to allocate a suitable buffer size.
rgrover1 716:11b41f651697 888 *
rgrover1 716:11b41f651697 889 * @return BLE_ERROR_NONE if a value was read successfully into the buffer.
rgrover1 716:11b41f651697 890 *
rgrover1 716:11b41f651697 891 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 892 * You should use the parallel API from GattServer directly. A former call
rgrover1 716:11b41f651697 893 * to ble.readCharacteristicValue() should be replaced with
rgrover1 716:11b41f651697 894 * ble.gattServer().read().
rgrover1 716:11b41f651697 895 */
rgrover1 716:11b41f651697 896 ble_error_t readCharacteristicValue(GattAttribute::Handle_t attributeHandle, uint8_t *buffer, uint16_t *lengthP) {
rgrover1 716:11b41f651697 897 return gattServer().read(attributeHandle, buffer, lengthP);
rgrover1 716:11b41f651697 898 }
rgrover1 716:11b41f651697 899
rgrover1 716:11b41f651697 900 /**
rgrover1 716:11b41f651697 901 * Read the value of a characteristic from the local GattServer
rgrover1 716:11b41f651697 902 * @param[in] connectionHandle
rgrover1 716:11b41f651697 903 * Connection Handle.
rgrover1 716:11b41f651697 904 * @param[in] attributeHandle
rgrover1 716:11b41f651697 905 * Attribute handle for the value attribute of the characteristic.
rgrover1 716:11b41f651697 906 * @param[out] buffer
rgrover1 716:11b41f651697 907 * A buffer to hold the value being read.
rgrover1 716:11b41f651697 908 * @param[in/out] lengthP
rgrover1 716:11b41f651697 909 * Length of the buffer being supplied. If the attribute
rgrover1 716:11b41f651697 910 * value is longer than the size of the supplied buffer,
rgrover1 716:11b41f651697 911 * this variable will hold upon return the total attribute value length
rgrover1 716:11b41f651697 912 * (excluding offset). The application may use this
rgrover1 716:11b41f651697 913 * information to allocate a suitable buffer size.
rgrover1 716:11b41f651697 914 *
rgrover1 716:11b41f651697 915 * @return BLE_ERROR_NONE if a value was read successfully into the buffer.
rgrover1 716:11b41f651697 916 *
rgrover1 716:11b41f651697 917 * @note This API is a version of above with an additional connection handle
rgrover1 716:11b41f651697 918 * parameter to allow fetches for connection-specific multivalued
rgrover1 733:718a3566b4ce 919 * attributes (such as the CCCDs).
rgrover1 716:11b41f651697 920 *
rgrover1 716:11b41f651697 921 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 922 * You should use the parallel API from GattServer directly. A former call
rgrover1 716:11b41f651697 923 * to ble.readCharacteristicValue() should be replaced with
rgrover1 716:11b41f651697 924 * ble.gattServer().read().
rgrover1 716:11b41f651697 925 */
rgrover1 716:11b41f651697 926 ble_error_t readCharacteristicValue(Gap::Handle_t connectionHandle, GattAttribute::Handle_t attributeHandle, uint8_t *buffer, uint16_t *lengthP) {
rgrover1 716:11b41f651697 927 return gattServer().read(connectionHandle, attributeHandle, buffer, lengthP);
rgrover1 716:11b41f651697 928 }
rgrover1 716:11b41f651697 929
rgrover1 716:11b41f651697 930 /**
rgrover1 716:11b41f651697 931 * Update the value of a characteristic on the local GattServer.
rgrover1 716:11b41f651697 932 *
rgrover1 716:11b41f651697 933 * @param[in] attributeHandle
rgrover1 716:11b41f651697 934 * Handle for the value attribute of the Characteristic.
rgrover1 716:11b41f651697 935 * @param[in] value
rgrover1 716:11b41f651697 936 * A pointer to a buffer holding the new value
rgrover1 716:11b41f651697 937 * @param[in] size
rgrover1 716:11b41f651697 938 * Size of the new value (in bytes).
rgrover1 716:11b41f651697 939 * @param[in] localOnly
rgrover1 716:11b41f651697 940 * Should this update be kept on the local
rgrover1 716:11b41f651697 941 * GattServer regardless of the state of the
rgrover1 716:11b41f651697 942 * notify/indicate flag in the CCCD for this
rgrover1 716:11b41f651697 943 * Characteristic? If set to true, no notification
rgrover1 716:11b41f651697 944 * or indication is generated.
rgrover1 716:11b41f651697 945 *
rgrover1 716:11b41f651697 946 * @return BLE_ERROR_NONE if we have successfully set the value of the attribute.
rgrover1 716:11b41f651697 947 *
rgrover1 716:11b41f651697 948 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 949 * You should use the parallel API from GattServer directly. A former call
rgrover1 716:11b41f651697 950 * to ble.updateCharacteristicValue() should be replaced with
rgrover1 716:11b41f651697 951 * ble.gattServer().write().
rgrover1 716:11b41f651697 952 */
rgrover1 716:11b41f651697 953 ble_error_t updateCharacteristicValue(GattAttribute::Handle_t attributeHandle,
rgrover1 716:11b41f651697 954 const uint8_t *value,
rgrover1 716:11b41f651697 955 uint16_t size,
rgrover1 716:11b41f651697 956 bool localOnly = false) {
rgrover1 716:11b41f651697 957 return gattServer().write(attributeHandle, value, size, localOnly);
rgrover1 716:11b41f651697 958 }
rgrover1 716:11b41f651697 959
rgrover1 716:11b41f651697 960 /**
rgrover1 716:11b41f651697 961 * Update the value of a characteristic on the local GattServer. A version
rgrover1 716:11b41f651697 962 * of the same as above with connection handle parameter to allow updates
rgrover1 733:718a3566b4ce 963 * for connection-specific multivalued attributes (such as the CCCDs).
rgrover1 716:11b41f651697 964 *
rgrover1 716:11b41f651697 965 * @param[in] connectionHandle
rgrover1 716:11b41f651697 966 * Connection Handle.
rgrover1 716:11b41f651697 967 * @param[in] attributeHandle
rgrover1 716:11b41f651697 968 * Handle for the value attribute of the Characteristic.
rgrover1 716:11b41f651697 969 * @param[in] value
rgrover1 716:11b41f651697 970 * A pointer to a buffer holding the new value
rgrover1 716:11b41f651697 971 * @param[in] size
rgrover1 716:11b41f651697 972 * Size of the new value (in bytes).
rgrover1 716:11b41f651697 973 * @param[in] localOnly
rgrover1 716:11b41f651697 974 * Should this update be kept on the local
rgrover1 716:11b41f651697 975 * GattServer regardless of the state of the
rgrover1 716:11b41f651697 976 * notify/indicate flag in the CCCD for this
rgrover1 716:11b41f651697 977 * Characteristic? If set to true, no notification
rgrover1 716:11b41f651697 978 * or indication is generated.
rgrover1 716:11b41f651697 979 *
rgrover1 716:11b41f651697 980 * @return BLE_ERROR_NONE if we have successfully set the value of the attribute.
rgrover1 716:11b41f651697 981 *
rgrover1 716:11b41f651697 982 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 983 * You should use the parallel API from GattServer directly. A former call
rgrover1 716:11b41f651697 984 * to ble.updateCharacteristicValue() should be replaced with
rgrover1 716:11b41f651697 985 * ble.gattServer().write().
rgrover1 716:11b41f651697 986 */
rgrover1 716:11b41f651697 987 ble_error_t updateCharacteristicValue(Gap::Handle_t connectionHandle,
rgrover1 716:11b41f651697 988 GattAttribute::Handle_t attributeHandle,
rgrover1 716:11b41f651697 989 const uint8_t *value,
rgrover1 716:11b41f651697 990 uint16_t size,
rgrover1 716:11b41f651697 991 bool localOnly = false) {
rgrover1 716:11b41f651697 992 return gattServer().write(connectionHandle, attributeHandle, value, size, localOnly);
rgrover1 716:11b41f651697 993 }
rgrover1 716:11b41f651697 994
rgrover1 716:11b41f651697 995 /**
rgrover1 716:11b41f651697 996 * Enable the BLE stack's Security Manager. The Security Manager implements
rgrover1 716:11b41f651697 997 * the actual cryptographic algorithms and protocol exchanges that allow two
rgrover1 716:11b41f651697 998 * devices to securely exchange data and privately detect each other.
rgrover1 716:11b41f651697 999 * Calling this API is a prerequisite for encryption and pairing (bonding).
rgrover1 716:11b41f651697 1000 *
rgrover1 716:11b41f651697 1001 * @param[in] enableBonding Allow for bonding.
rgrover1 716:11b41f651697 1002 * @param[in] requireMITM Require protection for man-in-the-middle attacks.
rgrover1 716:11b41f651697 1003 * @param[in] iocaps To specify IO capabilities of this peripheral,
rgrover1 716:11b41f651697 1004 * such as availability of a display or keyboard to
rgrover1 716:11b41f651697 1005 * support out-of-band exchanges of security data.
rgrover1 716:11b41f651697 1006 * @param[in] passkey To specify a static passkey.
rgrover1 716:11b41f651697 1007 *
rgrover1 716:11b41f651697 1008 * @return BLE_ERROR_NONE on success.
rgrover1 716:11b41f651697 1009 *
rgrover1 716:11b41f651697 1010 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 1011 * You should use the parallel API from SecurityManager directly. A former
rgrover1 716:11b41f651697 1012 * call to ble.initializeSecurity(...) should be replaced with
rgrover1 716:11b41f651697 1013 * ble.securityManager().init(...).
rgrover1 716:11b41f651697 1014 */
rgrover1 716:11b41f651697 1015 ble_error_t initializeSecurity(bool enableBonding = true,
rgrover1 716:11b41f651697 1016 bool requireMITM = true,
rgrover1 716:11b41f651697 1017 SecurityManager::SecurityIOCapabilities_t iocaps = SecurityManager::IO_CAPS_NONE,
rgrover1 716:11b41f651697 1018 const SecurityManager::Passkey_t passkey = NULL) {
rgrover1 716:11b41f651697 1019 return securityManager().init(enableBonding, requireMITM, iocaps, passkey);
rgrover1 716:11b41f651697 1020 }
rgrover1 716:11b41f651697 1021
rgrover1 716:11b41f651697 1022 /**
rgrover1 716:11b41f651697 1023 * Get the security status of a connection.
rgrover1 716:11b41f651697 1024 *
rgrover1 716:11b41f651697 1025 * @param[in] connectionHandle Handle to identify the connection.
rgrover1 716:11b41f651697 1026 * @param[out] securityStatusP security status.
rgrover1 716:11b41f651697 1027 *
rgrover1 716:11b41f651697 1028 * @return BLE_SUCCESS Or appropriate error code indicating reason for failure.
rgrover1 716:11b41f651697 1029 *
rgrover1 716:11b41f651697 1030 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 1031 * You should use the parallel API from SecurityManager directly. A former
rgrover1 716:11b41f651697 1032 * call to ble.getLinkSecurity(...) should be replaced with
rgrover1 716:11b41f651697 1033 * ble.securityManager().getLinkSecurity(...).
rgrover1 716:11b41f651697 1034 */
rgrover1 716:11b41f651697 1035 ble_error_t getLinkSecurity(Gap::Handle_t connectionHandle, SecurityManager::LinkSecurityStatus_t *securityStatusP) {
rgrover1 716:11b41f651697 1036 return securityManager().getLinkSecurity(connectionHandle, securityStatusP);
rgrover1 716:11b41f651697 1037 }
rgrover1 716:11b41f651697 1038
rgrover1 716:11b41f651697 1039 /**
rgrover1 716:11b41f651697 1040 * Delete all peer device context and all related bonding information from
rgrover1 716:11b41f651697 1041 * the database within the security manager.
rgrover1 716:11b41f651697 1042 *
rgrover1 716:11b41f651697 1043 * @retval BLE_ERROR_NONE On success, else an error code indicating reason for failure.
rgrover1 716:11b41f651697 1044 * @retval BLE_ERROR_INVALID_STATE If the API is called without module initialization and/or
rgrover1 716:11b41f651697 1045 * application registration.
rgrover1 716:11b41f651697 1046 *
rgrover1 716:11b41f651697 1047 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 1048 * You should use the parallel API from SecurityManager directly. A former
rgrover1 716:11b41f651697 1049 * call to ble.purgeAllBondingState() should be replaced with
rgrover1 716:11b41f651697 1050 * ble.securityManager().purgeAllBondingState().
rgrover1 716:11b41f651697 1051 */
rgrover1 716:11b41f651697 1052 ble_error_t purgeAllBondingState(void) {
rgrover1 716:11b41f651697 1053 return securityManager().purgeAllBondingState();
rgrover1 716:11b41f651697 1054 }
rgrover1 716:11b41f651697 1055
rgrover1 716:11b41f651697 1056 /**
rgrover1 716:11b41f651697 1057 * Setup a callback for timeout events. Refer to Gap::TimeoutSource_t for
rgrover1 716:11b41f651697 1058 * possible event types.
rgrover1 716:11b41f651697 1059 *
rgrover1 716:11b41f651697 1060 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 751:868b6dd7a6bf 1061 * You should use the parallel API from Gap directly. A former call
rgrover1 716:11b41f651697 1062 * to ble.onTimeout(callback) should be replaced with
rgrover1 716:11b41f651697 1063 * ble.gap().onTimeout(callback).
rgrover1 716:11b41f651697 1064 */
rgrover1 716:11b41f651697 1065 void onTimeout(Gap::TimeoutEventCallback_t timeoutCallback) {
rgrover1 716:11b41f651697 1066 gap().onTimeout(timeoutCallback);
rgrover1 716:11b41f651697 1067 }
rgrover1 716:11b41f651697 1068
rgrover1 716:11b41f651697 1069 /**
rgrover1 716:11b41f651697 1070 * Setup a callback for connection events. Refer to Gap::ConnectionEventCallback_t.
rgrover1 716:11b41f651697 1071 *
rgrover1 716:11b41f651697 1072 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 751:868b6dd7a6bf 1073 * You should use the parallel API from Gap directly. A former call
rgrover1 716:11b41f651697 1074 * to ble.onConnection(callback) should be replaced with
rgrover1 716:11b41f651697 1075 * ble.gap().onConnection(callback).
rgrover1 716:11b41f651697 1076 */
rgrover1 716:11b41f651697 1077 void onConnection(Gap::ConnectionEventCallback_t connectionCallback) {
rgrover1 716:11b41f651697 1078 gap().onConnection(connectionCallback);
rgrover1 716:11b41f651697 1079 }
rgrover1 716:11b41f651697 1080
rgrover1 716:11b41f651697 1081 /**
rgrover1 716:11b41f651697 1082 * Used to setup a callback for GAP disconnection.
rgrover1 716:11b41f651697 1083 *
rgrover1 716:11b41f651697 1084 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 751:868b6dd7a6bf 1085 * You should use the parallel API from Gap directly. A former call
rgrover1 716:11b41f651697 1086 * to ble.onDisconnection(callback) should be replaced with
rgrover1 716:11b41f651697 1087 * ble.gap().onDisconnection(callback).
rgrover1 716:11b41f651697 1088 */
rgrover1 716:11b41f651697 1089 void onDisconnection(Gap::DisconnectionEventCallback_t disconnectionCallback) {
rgrover1 716:11b41f651697 1090 gap().onDisconnection(disconnectionCallback);
rgrover1 716:11b41f651697 1091 }
rgrover1 716:11b41f651697 1092
rgrover1 716:11b41f651697 1093 /**
rgrover1 716:11b41f651697 1094 * Append to a chain of callbacks to be invoked upon disconnection; these
rgrover1 716:11b41f651697 1095 * callbacks receive no context and are therefore different from the
rgrover1 716:11b41f651697 1096 * onDisconnection callback.
rgrover1 716:11b41f651697 1097 *
rgrover1 716:11b41f651697 1098 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 751:868b6dd7a6bf 1099 * You should use the parallel API from Gap directly. A former call
rgrover1 716:11b41f651697 1100 * to ble.addToDisconnectionCallchain(...) should be replaced with
rgrover1 716:11b41f651697 1101 * ble.gap().addToDisconnectionCallchain(...).
rgrover1 716:11b41f651697 1102 */
rgrover1 716:11b41f651697 1103 template<typename T>
rgrover1 716:11b41f651697 1104 void addToDisconnectionCallChain(T *tptr, void (T::*mptr)(void)) {
rgrover1 716:11b41f651697 1105 gap().addToDisconnectionCallChain(tptr, mptr);
rgrover1 716:11b41f651697 1106 }
rgrover1 716:11b41f651697 1107
rgrover1 716:11b41f651697 1108 /**
rgrover1 716:11b41f651697 1109 * Radio Notification is a feature that enables ACTIVE and INACTIVE
rgrover1 716:11b41f651697 1110 * (nACTIVE) signals from the stack that notify the application when the
rgrover1 716:11b41f651697 1111 * radio is in use. The signal is sent using software interrupt.
rgrover1 716:11b41f651697 1112 *
rgrover1 716:11b41f651697 1113 * The ACTIVE signal is sent before the Radio Event starts. The nACTIVE
rgrover1 716:11b41f651697 1114 * signal is sent at the end of the Radio Event. These signals can be used
rgrover1 716:11b41f651697 1115 * by the application programmer to synchronize application logic with radio
rgrover1 716:11b41f651697 1116 * activity. For example, the ACTIVE signal can be used to shut off external
rgrover1 716:11b41f651697 1117 * devices to manage peak current drawn during periods when the radio is on,
rgrover1 716:11b41f651697 1118 * or to trigger sensor data collection for transmission in the Radio Event.
rgrover1 716:11b41f651697 1119 *
rgrover1 716:11b41f651697 1120 * @param callback
rgrover1 716:11b41f651697 1121 * The application handler to be invoked in response to a radio
rgrover1 716:11b41f651697 1122 * ACTIVE/INACTIVE event.
rgrover1 716:11b41f651697 1123 *
rgrover1 716:11b41f651697 1124 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 751:868b6dd7a6bf 1125 * You should use the parallel API from Gap directly. A former call
rgrover1 716:11b41f651697 1126 * to ble.onRadioNotification(...) should be replaced with
rgrover1 716:11b41f651697 1127 * ble.gap().onRadioNotification(...).
rgrover1 716:11b41f651697 1128 */
rgrover1 752:424c2ae44553 1129 void onRadioNotification(void (*callback)(bool)) {
rgrover1 716:11b41f651697 1130 gap().onRadioNotification(callback);
rgrover1 716:11b41f651697 1131 }
rgrover1 716:11b41f651697 1132
rgrover1 716:11b41f651697 1133 /**
rgrover1 716:11b41f651697 1134 * Add a callback for the GATT event DATA_SENT (which is triggered when
rgrover1 716:11b41f651697 1135 * updates are sent out by GATT in the form of notifications).
rgrover1 716:11b41f651697 1136 *
rgrover1 716:11b41f651697 1137 * @Note: it is possible to chain together multiple onDataSent callbacks
rgrover1 716:11b41f651697 1138 * (potentially from different modules of an application) to receive updates
rgrover1 716:11b41f651697 1139 * to characteristics.
rgrover1 716:11b41f651697 1140 *
rgrover1 716:11b41f651697 1141 * @Note: it is also possible to setup a callback into a member function of
rgrover1 716:11b41f651697 1142 * some object.
rgrover1 716:11b41f651697 1143 *
rgrover1 716:11b41f651697 1144 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 1145 * You should use the parallel API from GattServer directly. A former call
rgrover1 716:11b41f651697 1146 * to ble.onDataSent(...) should be replaced with
rgrover1 716:11b41f651697 1147 * ble.gattServer().onDataSent(...).
rgrover1 716:11b41f651697 1148 */
rgrover1 716:11b41f651697 1149 void onDataSent(void (*callback)(unsigned count)) {
rgrover1 716:11b41f651697 1150 gattServer().onDataSent(callback);
rgrover1 716:11b41f651697 1151 }
rgrover1 716:11b41f651697 1152 template <typename T> void onDataSent(T * objPtr, void (T::*memberPtr)(unsigned count)) {
rgrover1 716:11b41f651697 1153 gattServer().onDataSent(objPtr, memberPtr);
rgrover1 716:11b41f651697 1154 }
rgrover1 716:11b41f651697 1155
rgrover1 716:11b41f651697 1156 /**
rgrover1 716:11b41f651697 1157 * Setup a callback for when an attribute has its value updated by or at the
rgrover1 716:11b41f651697 1158 * connected peer. For a peripheral, this callback triggered when the local
rgrover1 716:11b41f651697 1159 * GATT server has an attribute updated by a write command from the peer.
rgrover1 716:11b41f651697 1160 * For a Central, this callback is triggered when a response is received for
rgrover1 716:11b41f651697 1161 * a write request.
rgrover1 716:11b41f651697 1162 *
rgrover1 716:11b41f651697 1163 * @Note: it is possible to chain together multiple onDataWritten callbacks
rgrover1 716:11b41f651697 1164 * (potentially from different modules of an application) to receive updates
rgrover1 716:11b41f651697 1165 * to characteristics. Many services, such as DFU and UART add their own
rgrover1 716:11b41f651697 1166 * onDataWritten callbacks behind the scenes to trap interesting events.
rgrover1 716:11b41f651697 1167 *
rgrover1 716:11b41f651697 1168 * @Note: it is also possible to setup a callback into a member function of
rgrover1 716:11b41f651697 1169 * some object.
rgrover1 716:11b41f651697 1170 *
rgrover1 716:11b41f651697 1171 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 1172 * You should use the parallel API from GattServer directly. A former call
rgrover1 716:11b41f651697 1173 * to ble.onDataWritten(...) should be replaced with
rgrover1 716:11b41f651697 1174 * ble.gattServer().onDataWritten(...).
rgrover1 716:11b41f651697 1175 */
rgrover1 716:11b41f651697 1176 void onDataWritten(void (*callback)(const GattWriteCallbackParams *eventDataP)) {
rgrover1 716:11b41f651697 1177 gattServer().onDataWritten(callback);
rgrover1 716:11b41f651697 1178 }
rgrover1 716:11b41f651697 1179 template <typename T> void onDataWritten(T * objPtr, void (T::*memberPtr)(const GattWriteCallbackParams *context)) {
rgrover1 716:11b41f651697 1180 gattServer().onDataWritten(objPtr, memberPtr);
rgrover1 716:11b41f651697 1181 }
rgrover1 716:11b41f651697 1182
rgrover1 716:11b41f651697 1183 /**
rgrover1 716:11b41f651697 1184 * Setup a callback to be invoked on the peripheral when an attribute is
rgrover1 716:11b41f651697 1185 * being read by a remote client.
rgrover1 716:11b41f651697 1186 *
rgrover1 716:11b41f651697 1187 * @Note: this functionality may not be available on all underlying stacks.
rgrover1 716:11b41f651697 1188 * You could use GattCharacteristic::setReadAuthorizationCallback() as an
rgrover1 716:11b41f651697 1189 * alternative.
rgrover1 716:11b41f651697 1190 *
rgrover1 716:11b41f651697 1191 * @Note: it is possible to chain together multiple onDataRead callbacks
rgrover1 716:11b41f651697 1192 * (potentially from different modules of an application) to receive updates
rgrover1 716:11b41f651697 1193 * to characteristics. Services may add their own onDataRead callbacks
rgrover1 716:11b41f651697 1194 * behind the scenes to trap interesting events.
rgrover1 716:11b41f651697 1195 *
rgrover1 716:11b41f651697 1196 * @Note: it is also possible to setup a callback into a member function of
rgrover1 716:11b41f651697 1197 * some object.
rgrover1 716:11b41f651697 1198 *
rgrover1 716:11b41f651697 1199 * @return BLE_ERROR_NOT_IMPLEMENTED if this functionality isn't available;
rgrover1 716:11b41f651697 1200 * else BLE_ERROR_NONE.
rgrover1 716:11b41f651697 1201 *
rgrover1 716:11b41f651697 1202 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 1203 * You should use the parallel API from GattServer directly. A former call
rgrover1 716:11b41f651697 1204 * to ble.onDataRead(...) should be replaced with
rgrover1 716:11b41f651697 1205 * ble.gattServer().onDataRead(...).
rgrover1 716:11b41f651697 1206 */
rgrover1 716:11b41f651697 1207 ble_error_t onDataRead(void (*callback)(const GattReadCallbackParams *eventDataP)) {
rgrover1 716:11b41f651697 1208 return gattServer().onDataRead(callback);
rgrover1 716:11b41f651697 1209 }
rgrover1 716:11b41f651697 1210 template <typename T> ble_error_t onDataRead(T * objPtr, void (T::*memberPtr)(const GattReadCallbackParams *context)) {
rgrover1 716:11b41f651697 1211 return gattServer().onDataRead(objPtr, memberPtr);
rgrover1 716:11b41f651697 1212 }
rgrover1 716:11b41f651697 1213
rgrover1 716:11b41f651697 1214 /**
rgrover1 716:11b41f651697 1215 * Setup a callback for when notifications/indications are enabled for a
rgrover1 716:11b41f651697 1216 * characteristic on the local GattServer.
rgrover1 716:11b41f651697 1217 *
rgrover1 716:11b41f651697 1218 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 1219 * You should use the parallel API from GattServer directly. A former call
rgrover1 716:11b41f651697 1220 * to ble.onUpdatesEnabled(callback) should be replaced with
rgrover1 716:11b41f651697 1221 * ble.gattServer().onUpdatesEnabled(callback).
rgrover1 716:11b41f651697 1222 */
rgrover1 716:11b41f651697 1223 void onUpdatesEnabled(GattServer::EventCallback_t callback) {
rgrover1 716:11b41f651697 1224 gattServer().onUpdatesEnabled(callback);
rgrover1 716:11b41f651697 1225 }
rgrover1 716:11b41f651697 1226
rgrover1 716:11b41f651697 1227 /**
rgrover1 716:11b41f651697 1228 * Setup a callback for when notifications/indications are disabled for a
rgrover1 716:11b41f651697 1229 * characteristic on the local GattServer.
rgrover1 716:11b41f651697 1230 *
rgrover1 716:11b41f651697 1231 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 1232 * You should use the parallel API from GattServer directly. A former call
rgrover1 716:11b41f651697 1233 * to ble.onUpdatesEnabled(callback) should be replaced with
rgrover1 716:11b41f651697 1234 * ble.gattServer().onUpdatesEnabled(callback).
rgrover1 716:11b41f651697 1235 */
rgrover1 716:11b41f651697 1236 void onUpdatesDisabled(GattServer::EventCallback_t callback) {
rgrover1 716:11b41f651697 1237 gattServer().onUpdatesDisabled(callback);
rgrover1 716:11b41f651697 1238 }
rgrover1 716:11b41f651697 1239
rgrover1 716:11b41f651697 1240 /**
rgrover1 716:11b41f651697 1241 * Setup a callback for when the GATT server receives a response for an
rgrover1 716:11b41f651697 1242 * indication event sent previously.
rgrover1 716:11b41f651697 1243 *
rgrover1 716:11b41f651697 1244 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 1245 * You should use the parallel API from GattServer directly. A former call
rgrover1 716:11b41f651697 1246 * to ble.onConfirmationReceived(callback) should be replaced with
rgrover1 716:11b41f651697 1247 * ble.gattServer().onConfirmationReceived(callback).
rgrover1 716:11b41f651697 1248 */
rgrover1 716:11b41f651697 1249 void onConfirmationReceived(GattServer::EventCallback_t callback) {
rgrover1 716:11b41f651697 1250 gattServer().onConfirmationReceived(callback);
rgrover1 716:11b41f651697 1251 }
rgrover1 716:11b41f651697 1252
rgrover1 716:11b41f651697 1253 /**
rgrover1 716:11b41f651697 1254 * Setup a callback for when the security setup procedure (key generation
rgrover1 716:11b41f651697 1255 * and exchange) for a link has started. This will be skipped for bonded
rgrover1 716:11b41f651697 1256 * devices. The callback is passed in parameters received from the peer's
rgrover1 716:11b41f651697 1257 * security request: bool allowBonding, bool requireMITM, and
rgrover1 716:11b41f651697 1258 * SecurityIOCapabilities_t.
rgrover1 716:11b41f651697 1259 *
rgrover1 716:11b41f651697 1260 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 1261 * You should use the parallel API from SecurityManager directly. A former
rgrover1 716:11b41f651697 1262 * call to ble.onSecuritySetupInitiated(callback) should be replaced with
rgrover1 716:11b41f651697 1263 * ble.securityManager().onSecuritySetupInitiated(callback).
rgrover1 716:11b41f651697 1264 */
rgrover1 716:11b41f651697 1265 void onSecuritySetupInitiated(SecurityManager::SecuritySetupInitiatedCallback_t callback) {
rgrover1 716:11b41f651697 1266 securityManager().onSecuritySetupInitiated(callback);
rgrover1 716:11b41f651697 1267 }
rgrover1 716:11b41f651697 1268
rgrover1 716:11b41f651697 1269 /**
rgrover1 716:11b41f651697 1270 * Setup a callback for when the security setup procedure (key generation
rgrover1 716:11b41f651697 1271 * and exchange) for a link has completed. This will be skipped for bonded
rgrover1 716:11b41f651697 1272 * devices. The callback is passed in the success/failure status of the
rgrover1 716:11b41f651697 1273 * security setup procedure.
rgrover1 716:11b41f651697 1274 *
rgrover1 716:11b41f651697 1275 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 1276 * You should use the parallel API from SecurityManager directly. A former
rgrover1 716:11b41f651697 1277 * call to ble.onSecuritySetupCompleted(callback) should be replaced with
rgrover1 716:11b41f651697 1278 * ble.securityManager().onSecuritySetupCompleted(callback).
rgrover1 716:11b41f651697 1279 */
rgrover1 716:11b41f651697 1280 void onSecuritySetupCompleted(SecurityManager::SecuritySetupCompletedCallback_t callback) {
rgrover1 716:11b41f651697 1281 securityManager().onSecuritySetupCompleted(callback);
rgrover1 716:11b41f651697 1282 }
rgrover1 716:11b41f651697 1283
rgrover1 716:11b41f651697 1284 /**
rgrover1 716:11b41f651697 1285 * Setup a callback for when a link with the peer is secured. For bonded
rgrover1 716:11b41f651697 1286 * devices, subsequent reconnections with bonded peer will result only in
rgrover1 716:11b41f651697 1287 * this callback when the link is secured and setup procedures will not
rgrover1 716:11b41f651697 1288 * occur unless the bonding information is either lost or deleted on either
rgrover1 716:11b41f651697 1289 * or both sides. The callback is passed in a SecurityManager::SecurityMode_t according
rgrover1 716:11b41f651697 1290 * to the level of security in effect for the secured link.
rgrover1 716:11b41f651697 1291 *
rgrover1 716:11b41f651697 1292 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 1293 * You should use the parallel API from SecurityManager directly. A former
rgrover1 716:11b41f651697 1294 * call to ble.onLinkSecured(callback) should be replaced with
rgrover1 716:11b41f651697 1295 * ble.securityManager().onLinkSecured(callback).
rgrover1 716:11b41f651697 1296 */
rgrover1 716:11b41f651697 1297 void onLinkSecured(SecurityManager::LinkSecuredCallback_t callback) {
rgrover1 716:11b41f651697 1298 securityManager().onLinkSecured(callback);
rgrover1 716:11b41f651697 1299 }
rgrover1 716:11b41f651697 1300
rgrover1 716:11b41f651697 1301 /**
rgrover1 716:11b41f651697 1302 * Setup a callback for successful bonding; i.e. that link-specific security
rgrover1 716:11b41f651697 1303 * context is stored persistently for a peer device.
rgrover1 716:11b41f651697 1304 *
rgrover1 716:11b41f651697 1305 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 1306 * You should use the parallel API from SecurityManager directly. A former
rgrover1 716:11b41f651697 1307 * call to ble.onSecurityContextStored(callback) should be replaced with
rgrover1 716:11b41f651697 1308 * ble.securityManager().onSecurityContextStored(callback).
rgrover1 716:11b41f651697 1309 */
rgrover1 716:11b41f651697 1310 void onSecurityContextStored(SecurityManager::HandleSpecificEvent_t callback) {
rgrover1 716:11b41f651697 1311 securityManager().onSecurityContextStored(callback);
rgrover1 716:11b41f651697 1312 }
rgrover1 716:11b41f651697 1313
rgrover1 716:11b41f651697 1314 /**
rgrover1 716:11b41f651697 1315 * Setup a callback for when the passkey needs to be displayed on a
rgrover1 716:11b41f651697 1316 * peripheral with DISPLAY capability. This happens when security is
rgrover1 716:11b41f651697 1317 * configured to prevent Man-In-The-Middle attacks, and a PIN (or passkey)
rgrover1 716:11b41f651697 1318 * needs to be exchanged between the peers to authenticate the connection
rgrover1 716:11b41f651697 1319 * attempt.
rgrover1 716:11b41f651697 1320 *
rgrover1 716:11b41f651697 1321 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 1322 * You should use the parallel API from SecurityManager directly. A former
rgrover1 716:11b41f651697 1323 * call to ble.onPasskeyDisplay(callback) should be replaced with
rgrover1 716:11b41f651697 1324 * ble.securityManager().onPasskeyDisplay(callback).
rgrover1 716:11b41f651697 1325 */
rgrover1 716:11b41f651697 1326 void onPasskeyDisplay(SecurityManager::PasskeyDisplayCallback_t callback) {
rgrover1 716:11b41f651697 1327 return securityManager().onPasskeyDisplay(callback);
rgrover1 716:11b41f651697 1328 }
rgrover1 716:11b41f651697 1329
rgrover1 716:11b41f651697 1330 public:
rgrover1 716:11b41f651697 1331 BLE() : transport(createBLEInstance()) {
rgrover1 716:11b41f651697 1332 /* empty */
rgrover1 716:11b41f651697 1333 }
rgrover1 716:11b41f651697 1334
rgrover1 716:11b41f651697 1335 private:
rgrover1 716:11b41f651697 1336 BLEInstanceBase *const transport; /* the device specific backend */
rgrover1 716:11b41f651697 1337 };
rgrover1 716:11b41f651697 1338
rgrover1 716:11b41f651697 1339 typedef BLE BLEDevice; /* DEPRECATED. This type alias is retained for the sake of compatibility with older
rgrover1 716:11b41f651697 1340 * code. Will be dropped at some point soon.*/
rgrover1 716:11b41f651697 1341
rgrover1 716:11b41f651697 1342 #endif // ifndef __BLE_H__