Jasper Sikken
This program displays heart rate and time between heart beats on LCD, prints it to a USB serial port, print it to a bluetooth serial port and store it on a USB mass storage device. The program has two interrupt routines: 1.Every 1ms a counter is increased with one, 2. On every heart beat the counter is value copied. In the main loop the beats per minute are calculated. Ext.Modules:- Polar RMCM-01 heart rate module connected to pin8. - 2x16 LCD - a RF-BT0417CB bluetooth serial device connected to p27 and p28 - an USB mass storage device
USBHostLite/usbhost_inc.h
- Committer:
- jrsikken
- Date:
- 2011-01-04
- Revision:
- 2:e660e68a91fa
- Parent:
- 1:8b001f936bb0
File content as of revision 2:e660e68a91fa:
/*
**************************************************************************************************************
* NXP USB Host Stack
*
* (c) Copyright 2008, NXP SemiConductors
* (c) Copyright 2008, OnChip Technologies LLC
* All Rights Reserved
*
* www.nxp.com
* www.onchiptech.com
*
* File : usbhost_inc.h
* Programmer(s) : Ravikanth.P
* Version :
*
**************************************************************************************************************
*/
#ifndef USBHOST_INC_H
#define USBHOST_INC_H
/*
**************************************************************************************************************
* INCLUDE HEADER FILES
**************************************************************************************************************
*/
#include "usbhost_cpu.h"
#include "usbhost_err.h"
#include "usbhost_lpc17xx.h"
#include "usbhost_ms.h"
#include "mbed.h"
#ifdef TARGET_LPC2368
#error "There is no USB host on the LPC2368!"
#endif
#endif