This program displays heart rate and time between heart beats on LCD, prints it to a USB serial port, print it to a bluetooth serial port and store it on a USB mass storage device. The program has two interrupt routines: 1.Every 1ms a counter is increased with one, 2. On every heart beat the counter is value copied. In the main loop the beats per minute are calculated. Ext.Modules:- Polar RMCM-01 heart rate module connected to pin8. - 2x16 LCD - a RF-BT0417CB bluetooth serial device connected to p27 and p28 - an USB mass storage device
Diff: USBHostLite/usbhost_inc.h
- Revision:
- 1:8b001f936bb0
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/USBHostLite/usbhost_inc.h Sat Nov 27 11:13:20 2010 +0000 @@ -0,0 +1,39 @@ +/* +************************************************************************************************************** +* NXP USB Host Stack +* +* (c) Copyright 2008, NXP SemiConductors +* (c) Copyright 2008, OnChip Technologies LLC +* All Rights Reserved +* +* www.nxp.com +* www.onchiptech.com +* +* File : usbhost_inc.h +* Programmer(s) : Ravikanth.P +* Version : +* +************************************************************************************************************** +*/ + +#ifndef USBHOST_INC_H +#define USBHOST_INC_H + +/* +************************************************************************************************************** +* INCLUDE HEADER FILES +************************************************************************************************************** +*/ + +#include "usbhost_cpu.h" +#include "usbhost_err.h" +#include "usbhost_lpc17xx.h" +#include "usbhost_ms.h" +#include "mbed.h" + + +#ifdef TARGET_LPC2368 +#error "There is no USB host on the LPC2368!" +#endif + +#endif