Revision 0:79d38a45830c, committed 2014-07-06

Comitter:

johnb

Date:

Sun Jul 06 20:25:00 2014 +0000

Commit message:

Example for using XBeeApi and mbed-rtos; ; Please note the comment at the top regarding the need to change the config before building the example!

Changed in this revision

diff -r 000000000000 -r 79d38a45830c XBeeApi.lib
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/XBeeApi.lib	Sun Jul 06 20:25:00 2014 +0000
@@ -0,0 +1,1 @@
+http://mbed.org/users/johnb/code/XBeeApi/#975a28e01dac

diff -r 000000000000 -r 79d38a45830c main.cpp
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/main.cpp	Sun Jul 06 20:25:00 2014 +0000
@@ -0,0 +1,136 @@
+/**
+   @file
+   @brief Example of using the XBeeApi library to broadcast a message
+          This example has more error checking than
+          XBeeApiSimpleBroadcast example and should improve the changes
+          of detecting and diagnosing a problem.
+          
+          This example shows how to use the library when using mbed-rtos.
+          Before compiling you must open "XbeeApi\Config\XBeeApiCfg.hpp"
+          and change the '#if 0' to '#if 1' on the line above the comment
+          reading "Use RTOS features to make XBeeApi threadsafe"
+
+   @author John Bailey 
+
+   @copyright Copyright 2014 John Bailey
+
+   @section LICENSE
+   
+Licensed under the Apache License, Version 2.0 (the "License");
+you may not use this file except in compliance with the License.
+You may obtain a copy of the License at
+
+    http://www.apache.org/licenses/LICENSE-2.0
+
+Unless required by applicable law or agreed to in writing, software
+distributed under the License is distributed on an "AS IS" BASIS,
+WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+See the License for the specific language governing permissions and
+limitations under the License.
+
+*/
+
+#include "mbed.h"   
+#include "xbeeapi.hpp"
+ 
+const uint8_t tx_data[] = { 'H', 'E', 'L', 'L', 'O' };
+
+/* TODO: You may need to change these based on the device/connections that you're using */ 
+#define XBEE_TX_PIN PTA2
+#define XBEE_RX_PIN PTA1
+
+#define WAIT_FOR_TX_TIME 500
+
+Serial pc(USBTX, USBRX); // tx, rx
+
+/* Network address for our XBee */
+const uint16_t myNetworkAddress = 0x1234;
+
+/* ID for the Personal Area Network we're going to join */
+const XBeeApiCmdAt::panId_t myPANId = 1000;
+
+/* Network channel to use */
+const XBeeApiCmdAt::channel_t myChannelId = 14;
+
+/* This example sends a frame to a specific destination address - we could set
+   the frame to be broadcast by calling the setDestAddrBroadcast() method
+   instead of setDestAddr() in the function below.
+   By default 16-bit addressing mode is used.  setDestAddrType can be used
+   to select between 16-bit and 64-bit addressing modes */
+const uint16_t frameDestinationAddress = 0x01;
+
+XBeeDevice xbeeDevice( XBEE_TX_PIN, XBEE_RX_PIN, NC, NC );
+   
+int main() {
+    /* This example will use the blocking API for simplicity */   
+    XBeeApiCmdAtBlocking atIf( &xbeeDevice );
+
+    XBeeDevice::XBeeDeviceReturn_t status;
+
+    /* This is the frame we're going to transmit - using the extended version so that
+       stats are available */
+    XBeeApiTxFrameEx frame( &xbeeDevice );
+        
+    if( !xbeeDevice.setupDispatchTask() )
+    {
+        pc.printf("setupDispatchTask() failed - XBeeDevice class won't receive any data\r\n");
+    }
+        
+    /* Get API mode 2 set up - this is a pre-requisit to using other XBeeApi functions.
+       This step may not be needed in the case that the XBee has already been configured
+       to use Mode 2 and the setting has been stored in NV */
+    status = xbeeDevice.setUpApi();
+
+    if( status == XBeeDevice::XBEEDEVICE_OK )
+    {
+
+        /* Set the 16-bit source address of this XBee */
+        atIf.setSourceAddress( myNetworkAddress );
+        if( xbeeSetNetworkTypeP2P( &atIf, myPANId, myChannelId ) )
+        {
+            /* Set the data pointer & destination address in the transmit frame */
+            frame.setDataPtr( tx_data, sizeof( tx_data ) );
+            frame.setDestAddr( frameDestinationAddress );
+            
+            xbeeDevice.SendFrame( &frame );
+            
+            /* Arbitary wait for the TX to occurr.  We could poll getMostRecentStatus() 
+               instead of just waiting */
+            wait_ms( WAIT_FOR_TX_TIME );
+    
+            pc.printf( "\r\nTX Status: ");
+            switch( frame.getMostRecentStatus() )
+            {
+                case XBeeApiTxFrame::XBEE_API_TX_STATUS_LAST:
+                    /* Didn't receive a response from the XBee indicating
+                       the transmit status */    
+                    pc.printf("No TX confirmation received from XBee");
+                    break;
+                case XBeeApiTxFrame::XBEE_API_TX_STATUS_OK:
+                    /* Frame was transmitted OK and at least one other network
+                       node acknowledged it */
+                    pc.printf("OK");
+                    break;
+                case XBeeApiTxFrame::XBEE_API_TX_STATUS_NO_ACK:
+                    /* This means that the message was transmitted by 
+                       the XBee but no other nodes on the network acknowledged it.
+                       Could be other nodes are not on the same PAN, channel, etc) */
+                    pc.printf("No acknowledgement received");
+                    break;
+                default:
+                    /* In this example we don't expect a response other than
+                       those explicitly handled above */
+                    pc.printf("Unexpected response received");
+                    break;
+            }
+        }
+        else
+        {
+            pc.printf("xbeeSetNetworkTypeP2P reported failure\r\n");
+        }
+    }
+    else
+    {
+        pc.printf("setUpApi failed with status %d\r\n",status);
+    }
+}
\ No newline at end of file

diff -r 000000000000 -r 79d38a45830c mbed-rtos.lib
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed-rtos.lib	Sun Jul 06 20:25:00 2014 +0000
@@ -0,0 +1,1 @@
+http://mbed.org/users/mbed_official/code/mbed-rtos/#1520481a219c

diff -r 000000000000 -r 79d38a45830c mbed.bld
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed.bld	Sun Jul 06 20:25:00 2014 +0000
@@ -0,0 +1,1 @@
+http://mbed.org/users/mbed_official/code/mbed/builds/04dd9b1680ae
\ No newline at end of file