John Bailey / XBeeApi

API for communicating with XBee devices.

Dependencies:   CircularBuffer FixedLengthList

Dependents:   XBeeApiTest XBeeApiSimpleATCmdsExample XBeeApiBroadcastExample XBeeApiBroadcastExampleRTOS ... more

Overview

XBeeApi is intended to be a library for providing a high-level API interface to the XBee - for example getChannel() and setChannel(2) methods rather than needing to send( "ATCH" ) and send( "ATCH 2" ) - and then de-code the responses.

See the notebook page here for a description of how the API works & some details on the various classes.

Features:

  • Support for transmission & reception of data packets
  • Support for reading & changing settings
  • Support for "Remote AT" interface to access settings & I/O channels on remote XBees
  • XBeeApi should work if you're using mbed-rtos, though it is not currently threadsafe. Take a look at the XBeeApiBroadcastExampleRTOS example if you're including mbed-rtos.

Example Programs

There are also example programs available:

Transmit

Import programXBeeApiSimpleBroadcastExample

Simple example of how to use XBeeApi - set up the XBee, configure P2P networking then transmit a frame.

Last commit 06 Jul 2014 by John Bailey

Import programXBeeApiBroadcastExample

Example for XBeeAPI; a little more involved than XBeeApiSimpleBroadcastExample with report on failure to set up the XBee and on the transmit status of the message.

Last commit 05 Jul 2014 by John Bailey

Import programXBeeApiBroadcastExampleRTOS

Example of using the XBeeApi library to broadcast a message, based on XBeeApiBroadcastExample. This example shows how to use the library when using mbed-rtos. Before compiling you must open "XbeeApi\Config\XBeeApiCfg.hpp" and change the '#if 0' to '#if 1' on the line above the comment reading "Use RTOS features to make XBeeApi threadsafe"

Last commit 06 Jul 2014 by John Bailey

Settings/Status

Import programXBeeApiSimpleATCmdsExample

Simple example of using XBeeApi to send AT-style commands to the XBee

Last commit 31 Mar 2014 by John Bailey

Import programXBeeApiRemoteATCmdsExample

Example of using the XBeeApi library to send AT commands to remote XBee devices in order to read/write settings

Last commit 13 Jul 2014 by John Bailey

Receive

Import programXBeeApiSimpleReceiveExample

Simple example of using XBeeApi to receive data packets via wireless

Last commit 08 Jul 2014 by John Bailey

Import programXBeeApiReceiveCallbackExample

Example of using the XBeeApi library to receive a message via a callback method

Last commit 08 Jul 2014 by John Bailey

Import programXBeeApiReceiveCallbackExampleRTOS

Example of using the XBeeApi library to receive a message via a callback method. This example shows how to use the library when using mbed-rtos. See the comment at the top of main.cpp

Last commit 08 Jul 2014 by John Bailey

Remote I/O

Import programXBeeApiRemoteIOExample

Example of using the XBeeApi library to read inputs on a remote XBee

Last commit 28 Jul 2014 by John Bailey

If you have 2 mbed connected XBees available then you can use XBeeApiSimpleReceiveExample and XBeeApiSimpleBroadcastExample as a pair.

Note that this is still a work in progress! XBeeApiTodoList tracks some of the functionality still to be added.

Diff: Base/XBeeApiFrame.hpp

Revision:
53:7b65422d7a32
Parent:
51:a7d0d2ef9261
diff -r 0950b05d5270 -r 7b65422d7a32 Base/XBeeApiFrame.hpp
--- a/Base/XBeeApiFrame.hpp	Mon Jul 28 12:48:33 2014 +0000
+++ b/Base/XBeeApiFrame.hpp	Mon Jul 28 13:27:58 2014 +0000
@@ -68,10 +68,13 @@
     \returns Length of the frame payload excluding overhead */
 #define MSG_LEN_IN_BUFFER( _b ) ((((uint16_t)_b[ XBEE_CMD_POSN_LEN_HI ]) << 8U) + _b[XBEE_CMD_POSN_LEN_LO])
 
+/** The number of 'overhead' (i.e. those not included in the frame payload) bytes at the start of an API frame (namely the start delimiter & 2 length bytes) */
 #define XBEE_API_FRAME_OVERHEAD_START 3U
+
+/** The number of 'overhead' (i.e. those not included in the frame payload) bytes at the end of an API frame (namely the checksum) */
 #define XBEE_API_FRAME_OVERHEAD_END   1U
 
-/** The number of 'overhead' bytes in an API frame (i.e. those not included in the frame payload, namely the start delimiter, 2 length bytes & checksum */
+/** The total number of 'overhead' bytes in an API frame */
 #define XBEE_API_FRAME_OVERHEAD (XBEE_API_FRAME_OVERHEAD_START + XBEE_API_FRAME_OVERHEAD_END)
 
 /* Forward declare this as XBeeDevice is dependent upon XBeeApiFrameDecoder */
@@ -83,6 +86,7 @@
 class XBeeApiFrame
 {
     private:
+        /** Length of the frame header which precedes the data - currently a single byte which is the API ID */ 
         static const   uint8_t m_cmdHeaderLen = 1;
 
     protected:
@@ -105,7 +109,8 @@
                       const uint8_t* const p_data,
                       const size_t         p_dataLen );
 
-        /** Return the length of the API-specific structure represented by this frame.  i.e. the API frame without the overhead - see XBEE_API_FRAME_OVERHEAD */
+        /** Return the length of the API-specific structure represented by this frame.  i.e. the API frame without the overhead - see XBEE_API_FRAME_OVERHEAD.
+            The value includes both the data which is returned by getDataPtr and the byte used to identify the type of the packet, as returned by getApiId */
         virtual uint16_t getCmdLen( void ) const;
     
         /** Retrieve the API identifier for this frame */