JunMo Hong
센서보드 RF IRQ 테스트 중
Fork of
stm-spirit1-rf-driver
by 
ST
Diff: source/libs/Contiki_STM32_Library/hw-config.h
- Revision:
- 67:93bec0baf1de
- Parent:
- 34:edda6a7238ec
diff -r 1e09d233280b -r 93bec0baf1de source/libs/Contiki_STM32_Library/hw-config.h --- a/source/libs/Contiki_STM32_Library/hw-config.h Wed Jul 05 14:02:16 2017 +0200 +++ b/source/libs/Contiki_STM32_Library/hw-config.h Thu Jul 06 11:13:31 2017 +0200 @@ -1,125 +1,125 @@ - /** - ****************************************************************************** - * @file hw-config.h - * @author System LAB - * @version V1.0.0 - * @date 17-May-2015 - * @brief Header file for Hardware Configuration & Setup - ****************************************************************************** - * @attention - * - * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2> - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ -/*---------------------------------------------------------------------------*/ -#ifndef __HW_CONFIG_H -#define __HW_CONFIG_H -/*---------------------------------------------------------------------------*/ -#include "stm32l-spirit1-config.h" -/*---------------------------------------------------------------------------*/ -#define UART_RxBufferSize 512 -/*---------------------------------------------------------------------------*/ -#define I2Cx I2C1 -#define I2Cx_CLK_ENABLE() __I2C1_CLK_ENABLE() -#define I2Cx_SDA_GPIO_CLK_ENABLE() __GPIOB_CLK_ENABLE() -#define I2Cx_SCL_GPIO_CLK_ENABLE() __GPIOB_CLK_ENABLE() -/*---------------------------------------------------------------------------*/ -#define I2Cx_FORCE_RESET() __I2C1_FORCE_RESET() -#define I2Cx_RELEASE_RESET() __I2C1_RELEASE_RESET() -/*---------------------------------------------------------------------------*/ -/* Definition for I2Cx Pins */ -#define I2Cx_SCL_PIN GPIO_PIN_8 -#define I2Cx_SCL_GPIO_PORT GPIOB -#define I2Cx_SDA_PIN GPIO_PIN_9 -#define I2Cx_SDA_GPIO_PORT GPIOB -#define I2Cx_SCL_SDA_AF GPIO_AF4_I2C1 - -/* Definition for I2Cx's NVIC */ -#define I2Cx_EV_IRQn I2C1_EV_IRQn -#define I2Cx_ER_IRQn I2C1_ER_IRQn -#define I2Cx_EV_IRQHandler I2C1_EV_IRQHandler -#define I2Cx_ER_IRQHandler I2C1_ER_IRQHandler - - -#define I2Cx I2C1 -#define I2Cx_CLK_ENABLE() __I2C1_CLK_ENABLE() -#define I2Cx_SDA_GPIO_CLK_ENABLE() __GPIOB_CLK_ENABLE() -#define I2Cx_SCL_GPIO_CLK_ENABLE() __GPIOB_CLK_ENABLE() - -#define I2Cx_FORCE_RESET() __I2C1_FORCE_RESET() -#define I2Cx_RELEASE_RESET() __I2C1_RELEASE_RESET() - -/* Definition for I2Cx Pins */ -#define I2Cx_SCL_PIN GPIO_PIN_8 -#define I2Cx_SCL_GPIO_PORT GPIOB -#define I2Cx_SDA_PIN GPIO_PIN_9 -#define I2Cx_SDA_GPIO_PORT GPIOB -#define I2Cx_SCL_SDA_AF GPIO_AF4_I2C1 - -/* Definition for I2Cx's NVIC */ -#define I2Cx_EV_IRQn I2C1_EV_IRQn -#define I2Cx_ER_IRQn I2C1_ER_IRQn -#define I2Cx_EV_IRQHandler I2C1_EV_IRQHandler -#define I2Cx_ER_IRQHandler I2C1_ER_IRQHandler - -/* User can use this section to tailor USARTx/UARTx instance used and associated - resources */ -/* Definition for USARTx clock resources */ -#define USARTx USART2 -#define USARTx_CLK_ENABLE() __USART2_CLK_ENABLE(); -#define DMAx_CLK_ENABLE() __DMA1_CLK_ENABLE() -#define USARTx_RX_GPIO_CLK_ENABLE() __GPIOA_CLK_ENABLE() -#define USARTx_TX_GPIO_CLK_ENABLE() __GPIOA_CLK_ENABLE() - -#define USARTx_FORCE_RESET() __USART2_FORCE_RESET() -#define USARTx_RELEASE_RESET() __USART2_RELEASE_RESET() - -/* Definition for USARTx Pins */ -#define USARTx_TX_PIN GPIO_PIN_2 -#define USARTx_TX_GPIO_PORT GPIOA - -#define USARTx_RX_PIN GPIO_PIN_3 -#define USARTx_RX_GPIO_PORT GPIOA - - /* Definition for USARTx's NVIC */ -#define USARTx_IRQn USART2_IRQn -#define USARTx_IRQHandler USART2_IRQHandler - -#define USARTx_TX_AF GPIO_AF7_USART2 -#define USARTx_RX_AF GPIO_AF7_USART2 - - - /* Enable sensor mask */ -#define PRESSURE_SENSOR 0x00000001 -#define TEMPERATURE_SENSOR 0x00000002 -#define HUMIDITY_SENSOR 0x00000004 -#define UV_SENSOR 0x00000008 -#define ACCELEROMETER_SENSOR 0x00000010 -#define GYROSCOPE_SENSOR 0x00000020 -#define MAGNETIC_SENSOR 0x00000040 -/*---------------------------------------------------------------------------*/ -#endif /*__HW_CONFIG_H*/ -/*---------------------------------------------------------------------------*/ + /** + ****************************************************************************** + * @file hw-config.h + * @author System LAB + * @version V1.0.0 + * @date 17-May-2015 + * @brief Header file for Hardware Configuration & Setup + ****************************************************************************** + * @attention + * + * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2> + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ +/*---------------------------------------------------------------------------*/ +#ifndef __HW_CONFIG_H +#define __HW_CONFIG_H +/*---------------------------------------------------------------------------*/ +#include "stm32l-spirit1-config.h" +/*---------------------------------------------------------------------------*/ +#define UART_RxBufferSize 512 +/*---------------------------------------------------------------------------*/ +#define I2Cx I2C1 +#define I2Cx_CLK_ENABLE() __I2C1_CLK_ENABLE() +#define I2Cx_SDA_GPIO_CLK_ENABLE() __GPIOB_CLK_ENABLE() +#define I2Cx_SCL_GPIO_CLK_ENABLE() __GPIOB_CLK_ENABLE() +/*---------------------------------------------------------------------------*/ +#define I2Cx_FORCE_RESET() __I2C1_FORCE_RESET() +#define I2Cx_RELEASE_RESET() __I2C1_RELEASE_RESET() +/*---------------------------------------------------------------------------*/ +/* Definition for I2Cx Pins */ +#define I2Cx_SCL_PIN GPIO_PIN_8 +#define I2Cx_SCL_GPIO_PORT GPIOB +#define I2Cx_SDA_PIN GPIO_PIN_9 +#define I2Cx_SDA_GPIO_PORT GPIOB +#define I2Cx_SCL_SDA_AF GPIO_AF4_I2C1 + +/* Definition for I2Cx's NVIC */ +#define I2Cx_EV_IRQn I2C1_EV_IRQn +#define I2Cx_ER_IRQn I2C1_ER_IRQn +#define I2Cx_EV_IRQHandler I2C1_EV_IRQHandler +#define I2Cx_ER_IRQHandler I2C1_ER_IRQHandler + + +#define I2Cx I2C1 +#define I2Cx_CLK_ENABLE() __I2C1_CLK_ENABLE() +#define I2Cx_SDA_GPIO_CLK_ENABLE() __GPIOB_CLK_ENABLE() +#define I2Cx_SCL_GPIO_CLK_ENABLE() __GPIOB_CLK_ENABLE() + +#define I2Cx_FORCE_RESET() __I2C1_FORCE_RESET() +#define I2Cx_RELEASE_RESET() __I2C1_RELEASE_RESET() + +/* Definition for I2Cx Pins */ +#define I2Cx_SCL_PIN GPIO_PIN_8 +#define I2Cx_SCL_GPIO_PORT GPIOB +#define I2Cx_SDA_PIN GPIO_PIN_9 +#define I2Cx_SDA_GPIO_PORT GPIOB +#define I2Cx_SCL_SDA_AF GPIO_AF4_I2C1 + +/* Definition for I2Cx's NVIC */ +#define I2Cx_EV_IRQn I2C1_EV_IRQn +#define I2Cx_ER_IRQn I2C1_ER_IRQn +#define I2Cx_EV_IRQHandler I2C1_EV_IRQHandler +#define I2Cx_ER_IRQHandler I2C1_ER_IRQHandler + +/* User can use this section to tailor USARTx/UARTx instance used and associated + resources */ +/* Definition for USARTx clock resources */ +#define USARTx USART2 +#define USARTx_CLK_ENABLE() __USART2_CLK_ENABLE(); +#define DMAx_CLK_ENABLE() __DMA1_CLK_ENABLE() +#define USARTx_RX_GPIO_CLK_ENABLE() __GPIOA_CLK_ENABLE() +#define USARTx_TX_GPIO_CLK_ENABLE() __GPIOA_CLK_ENABLE() + +#define USARTx_FORCE_RESET() __USART2_FORCE_RESET() +#define USARTx_RELEASE_RESET() __USART2_RELEASE_RESET() + +/* Definition for USARTx Pins */ +#define USARTx_TX_PIN GPIO_PIN_2 +#define USARTx_TX_GPIO_PORT GPIOA + +#define USARTx_RX_PIN GPIO_PIN_3 +#define USARTx_RX_GPIO_PORT GPIOA + + /* Definition for USARTx's NVIC */ +#define USARTx_IRQn USART2_IRQn +#define USARTx_IRQHandler USART2_IRQHandler + +#define USARTx_TX_AF GPIO_AF7_USART2 +#define USARTx_RX_AF GPIO_AF7_USART2 + + + /* Enable sensor mask */ +#define PRESSURE_SENSOR 0x00000001 +#define TEMPERATURE_SENSOR 0x00000002 +#define HUMIDITY_SENSOR 0x00000004 +#define UV_SENSOR 0x00000008 +#define ACCELEROMETER_SENSOR 0x00000010 +#define GYROSCOPE_SENSOR 0x00000020 +#define MAGNETIC_SENSOR 0x00000040 +/*---------------------------------------------------------------------------*/ +#endif /*__HW_CONFIG_H*/ +/*---------------------------------------------------------------------------*/