JunMo Hong / EV-COG-AD3029LZ

Important changes to repositories hosted on mbed.com

Mbed hosted mercurial repositories are deprecated and are due to be permanently deleted in July 2026.

To keep a copy of this software download the repository Zip archive or clone locally using Mercurial.

It is also possible to export all your personal repositories from the account settings page.

Fork of stm-spirit1-rf-driver by ST

README.md@50:7f70089ba05f, 2017-02-14 (annotated)

Committer:
Wolfgang Betz
Date:
Tue Feb 14 13:41:25 2017 +0100
Revision:
50:7f70089ba05f
Child:
54:0f6612d36a29
Add `README.md`

Who changed what in which revision?

UserRevisionLine numberNew contents of line
Wolfgang Betz 50:7f70089ba05f 1 # Prototype RF Driver for STM Sub-1 GHz RF Expansion Boards based on the SPSGRF-868 Module for STM32 Nucleo #
Wolfgang Betz 50:7f70089ba05f 2
Wolfgang Betz 50:7f70089ba05f 3 Currently supported boards:
Wolfgang Betz 50:7f70089ba05f 4 * [X-NUCLEO-IDS01A4](http://www.st.com/content/st_com/en/products/ecosystems/stm32-open-development-environment/stm32-nucleo-expansion-boards/stm32-ode-connect-hw/x-nucleo-ids01a4.html)
Wolfgang Betz 50:7f70089ba05f 5
Wolfgang Betz 50:7f70089ba05f 6 **Note**, in order to use expansion board `X-NUCLEO-IDS01A4` in mbed you need to perform the following HW modifications on the board:
Wolfgang Betz 50:7f70089ba05f 7 * **Un**mount resistor `R4`
Wolfgang Betz 50:7f70089ba05f 8 * **Mount** resistor `R7`
Wolfgang Betz 50:7f70089ba05f 9
Wolfgang Betz 50:7f70089ba05f 10 Furthermore, on some Nucleo development boards (e.g. the [NUCLEO_F429ZI](https://developer.mbed.org/platforms/ST-Nucleo-F429ZI/)), in order to be able to use Ethernet together with these Sub-1 GHz RF expansion boards, you need to compile this driver with macro `PB5_ETH_PATCH` defined!
Wolfgang Betz 50:7f70089ba05f 11
Wolfgang Betz 50:7f70089ba05f 12 This driver is used with 6LoWPAN stack.
Wolfgang Betz 50:7f70089ba05f 13